arXiv subjects

Jin Lin

Publications and source records attributed to Jin Lin.

At least 37 records · Page 2Linked to original sources

arXiv2023

Multi-timescale Trading Strategy for Renewable Power to Ammonia Virtual Power Plant in the Electricity, Hydrogen, and Ammonia Markets

Renewable power to ammonia (RePtA) is a prominent zero-carbon pathway for decarbonization. Due to the imbalance between renewables and production energy demand, the RePtA system relies on the electricity exchange with the power grid. Participating in the electricity market as a virtual power plant (VPP) may help to reduce energy costs. However, the power profile of local photovoltaics and wind turbines is similar to those in the market, resulting in rising energy costs under the conventional strategy. Hence, we develop a multi-timescale trading strategy for the RePtA VPP in the electricity, hydrogen, and ammonia markets. By utilizing the hydrogen and ammonia buffer systems, the RePtA VPP can optimally coordinate production planning. Moreover, we find it possible to describe the trading of electricity, ammonia, and hydrogen in a unified framework. The two-stage robust optimization model of the electricity market is extended to multiple markets and solved by the column and constraint generation (CC\&G) algorithm. The case is derived from an actual project in the Inner Mongolia Autonomous Region. Sensitivity analysis demonstrates the economic advantages of an RePtA VPP joining multiple markets over conventional strategy and reveals the necessity of the hydrogen and ammonia buffer and reactor's flexibility.

eess.SY↗

arXiv2023

Extended Load Flexibility of Utility-Scale P2H Plants: Optimal Production Scheduling Considering Dynamic Thermal and HTO Impurity Effects

In the conversion toward a clear and sustainable energy system, the flexibility of power-to-hydrogen (P2H) production enables the admittance of volatile renewable energies on a utility scale and provides the connected electrical power system with ancillary services. To extend the load flexibility and thus improve the profitability of green hydrogen production, this paper presents an optimal production scheduling approach for utility-scale P2H plants composed of multiple alkaline electrolyzers. Unlike existing works, this work discards the conservative constant steady-state constraints and first leverages the dynamic thermal and hydrogen-to-oxygen (HTO) impurity crossover processes of electrolyzers. Doing this optimizes their effects on the loading range and energy conversion efficiency, therefore improving the load flexibility of P2H production. The proposed multiphysics-aware scheduling model is formulated as mixed-integer linear programming (MILP). It coordinates the electrolyzers' operation state transitions and load allocation subject to comprehensive thermodynamic and mass transfer constraints. A decomposition-based solution method, SDM-GS-ALM, is followingly adopted to address the scalability issue for scheduling large-scale P2H plants composed of tens of electrolyzers. With an experiment-verified dynamic electrolyzer model, case studies up to 22 electrolyzers show that the proposed method remarkably improves the hydrogen output and profit of P2H production powered by either solar or wind energy compared to the existing scheduling approach.

math.OC↗

arXiv2022

Optimal Sizing and Pricing of Renewable Power to Ammonia Systems Considering the Limited Flexibility of Ammonia Synthesis

Converting renewable energy into ammonia has been recognized as a promising way to realize ``green hydrogen substitution" in the chemical industry. However, renewable power to ammonia (RePtA) requires an essential investment in facilities to provide a buffer against the strong volatility of renewable energy and the limited flexibility of ammonia synthesis, which involves the three main stakeholders, namely, power, hydrogen, and ammonia. Therefore, the sizing and pricing of RePtA play a core role in balancing the interest demands of investors. This paper proposes an optimal sizing and pricing method for RePtA system planning. First, power to ammonia (P2A) is modeled as a flexible load, especially considering the limited flexibility of ammonia synthesis, which has been verified using real dynamic regulation data. Second, the multi-investor economic (MIE) model is established considering both external and internal trading modes. Then, a two-stage decomposed sizing and pricing method is proposed to solve the problem caused by the strong coupling of planning, operation, and trading, and information gap decision theory (IGDT) method is utilized to handle the uncertainty of renewable generation. Finally, real data from a real-life system in Inner Mongolia are utilized to verify the proposed approach. The results show that the system proposed has a yield of 8.15%.

eess.SY↗

arXiv2022

Quantum Neuronal Sensing of Quantum Many-Body States on a 61-Qubit Programmable Superconducting Processor

Classifying many-body quantum states with distinct properties and phases of matter is one of the most fundamental tasks in quantum many-body physics. However, due to the exponential complexity that emerges from the enormous numbers of interacting particles, classifying large-scale quantum states has been extremely challenging for classical approaches. Here, we propose a new approach called quantum neuronal sensing. Utilizing a 61 qubit superconducting quantum processor, we show that our scheme can efficiently classify two different types of many-body phenomena: namely the ergodic and localized phases of matter. Our quantum neuronal sensing process allows us to extract the necessary information coming from the statistical characteristics of the eigenspectrum to distinguish these phases of matter by measuring only one qubit. Our work demonstrates the feasibility and scalability of quantum neuronal sensing for near-term quantum processors and opens new avenues for exploring quantum many-body phenomena in larger-scale systems.

quant-ph↗

arXiv2022

Optimizing the Homogeneity and Efficiency of an SOEC Based on Multiphysics Simulation and Data-driven Surrogate Model

Inhomogeneous current and temperature distributions are harmful to the durability of the solid oxide electrolysis cell (SOEC). Segmented SOEC experiments reveal that a high steam utilization, which is favorable for system efficiency, leads to local steam starvation and enhanced the inhomogeneity. It is necessary to consider inhomogeneity and efficiency jointly in optimization studies. Three-dimensional (3D) multiphysics models validated with experiments can simulate the inhomogeneity in a reliable manner, but they are unsuitable for optimization due to the high computational cost. This study proposes a method that combines segmented SOEC experiments, multiphysics simulation, and artificial intelligence to optimize the inhomogeneity and efficiency of SOEC jointly. A 3D cell model is first built and verified by segmented SOEC experiments. Then, fast neural network surrogate models are built from the simulation data and integrated into a multi-objective optimization problem. Its solutions form a Pareto front reflecting the conflicting relationships among different objectives. It is found that the down-stream current is 60%-65% of the up-stream current when the steam utilization is 0.7. To increase the steam utilization to 0.8, the down-stream current will further drop to 50%-60% of the up-stream current. The Pareto fronts enable system operators to achieve a balance between efficiency and inhomogeneity.

eess.SY↗

arXiv2022

Design of the PID temperature controller for an alkaline electrolysis system with time delays

Electrolysis systems use proportional-integral-derivative (PID) temperature controllers to maintain stack temperatures around set points. However, heat transfer delays in electrolysis systems cause manual tuning of PID temperature controllers to be time-consuming, and temperature oscillations often occur. This paper focuses on the design of the PID temperature controller for an alkaline electrolysis system to achieve fast and stable temperature control. A thermal dynamic model of an electrolysis system is established in the frequency-domain for controller designs. Based on this model, the temperature stability is analysed by the root distribution, and the PID parameters are optimized considering both the temperature overshoot and the settling time. The performance of the optimal PID controllers is verified through experiments. Furthermore, the simulation results show that the before-stack temperature should be used as the feedback variable for small lab-scale systems to suppress stack temperature fluctuations, and the after-stack temperature should be used for larger systems to improve the economy. This study is helpful in ensuring the temperature stability and control of electrolysis systems.

eess.SY↗

arXiv2022

Online Dynamic Parameter Estimation of an Alkaline Electrolysis System Based on Bayesian Inference

When directly coupled with fluctuating energy sources such as wind and photovoltage power, the alkaline electrolysis (AEL) in a power-to-hydrogen (P2H) system is required to operate flexibly by dynamically adjusting its hydrogen production rate. The flex-ibility characteristics, e.g., loading range and ramping rate, of an AEL system are significantly influenced by some parameters re-lated to the dynamic processes of the AEL system. These parame-ters are usually difficult to measure directly and may even change with time. To accurately evaluate the flexibility of an AEL system in online operation, this paper presents a Bayesian Inference-based Markov Chain Monte Carlo (MCMC) method to estimate these parameters. Meanwhile, posterior joint probability distribu-tions of the estimated parameters are obtained as a byproduct, which provides valuable physical insight into the AEL systems. Experiments on a 25 kW electrolyzer validate the proposed pa-rameter estimation method.

eess.SY↗

arXiv2022

Extended Load Flexibility of Industrial P2H Plants: A Process Constraint-Aware Scheduling Approach

The operational flexibility of industrial power-to-hydrogen (P2H) plants enables admittance of volatile renewable power and provides auxiliary regulatory services for the power grid. Aiming to extend the flexibility of the P2H plant further, this work presents a scheduling method by considering detailed process constraints of the alkaline electrolyzers. Unlike existing works that assume constant load range, the presented scheduling framework fully exploits the dynamic processes of the electrolyzer, including temperature and hydrogen-to-oxygen (HTO) crossover, to improve operational flexibility. Varying energy conversion efficiency under different load levels and temperature is also considered. The scheduling model is solved by proper mathematical transformation as a mixed-integer linear programming (MILP), which determines the on-off-standby states and power levels of different electrolyzers in the P2H plant for daily operation. With experiment-verified constraints, a case study show that compared to the existing scheduling approach, the improved flexibility leads to a 1.627% profit increase when the P2H plant is directly coupled to the photovoltaic power.

eess.SY↗

arXiv2022

Thermal Modelling and Controller Design of an Alkaline Electrolysis System under Dynamic Operating Conditions

Thermal management is vital for the efficient and safe operation of alkaline electrolysis systems. Traditional alkaline electrolysis systems use simple proportional-integral-differentiation (PID) controllers to maintain the stack temperature near the rated value. However, in renewable-to-hydrogen scenarios, the stack temperature is disturbed by load fluctuations, and the temperature overshoot phenomenon occurs which can exceed the upper limit and harm the stack. This paper focuses on the thermal modelling and controller design of an alkaline electrolysis system under dynamic operating conditions. A control-oriented thermal model is established in the form of a third-order time-delay process, which is used for simulation and controller design. Based on this model, we propose two novel controllers to reduce temperature overshoot: one is a current feed-forward PID controller (PID-I), the other is a model predictive controller (MPC). Their performances are tested on a lab-scale system and the experimental results are satisfying: the temperature overshoot is reduced by 2.2 degree with the PID-I controller, and no obvious overshoot is observed with the MPC controller. Furthermore, the thermal dynamic performance of an MW-scale alkaline electrolysis system is analyzed by simulation, which shows that the temperature overshoot phenomenon is more general in large systems. The proposed method allows for higher temperature set points which can improve system efficiency by 1%.

eess.SY↗

arXiv2022

Realization of fast all-microwave CZ gates with a tunable coupler

The development of high-fidelity two-qubit quantum gates is essential for digital quantum computing. Here, we propose and realize an all-microwave parametric Controlled-Z (CZ) gates by coupling strength modulation in a superconducting Transmon qubit system with tunable couplers. After optimizing the design of the tunable coupler together with the control pulse numerically, we experimentally realized a 100 ns CZ gate with high fidelity of 99.38%$ \pm$0.34% and the control error being 0.1%. We note that our CZ gates are not affected by pulse distortion and do not need pulse correction, {providing a solution for the real-time pulse generation in a dynamic quantum feedback circuit}. With the expectation of utilizing our all-microwave control scheme to reduce the number of control lines through frequency multiplexing in the future, our scheme draws a blueprint for the high-integrable quantum hardware design.

quant-ph↗

arXiv2022

Realization of an Error-Correcting Surface Code with Superconducting Qubits

Quantum error correction is a critical technique for transitioning from noisy intermediate-scale quantum (NISQ) devices to fully fledged quantum computers. The surface code, which has a high threshold error rate, is the leading quantum error correction code for two-dimensional grid architecture. So far, the repeated error correction capability of the surface code has not been realized experimentally. Here, we experimentally implement an error-correcting surface code, the distance-3 surface code which consists of 17 qubits, on the \textit{Zuchongzhi} 2.1 superconducting quantum processor. By executing several consecutive error correction cycles, the logical error can be significantly reduced after applying corrections, achieving the repeated error correction of surface code for the first time. This experiment represents a fully functional instance of an error-correcting surface code, providing a key step on the path towards scalable fault-tolerant quantum computing.

quant-ph↗

arXiv2021

Joint Optimization of Wind Farm Layout Considering Optimal Control

The wake effect is one of the leading causes of energy losses in offshore wind farms (WFs). Both turbine placement and cooperative control can influence the wake interactions inside the WF and thus the overall WF power production. Traditionally, greedy control strategy is assumed in the layout design phase. To exploit the potential synergy between the WF layout and control so that a system-level optimal layout can be obtained with the greatest energy yields, the layout optimization should be performed with cooperative control considerations. For this purpose, a novel two-stage WF layout optimization model is developed in this paper. Cooperative WF control of both turbine yaw and axis-induction are considered in the WF layout design. However, the integration of WF control makes the layout optimization much more complicated and results in a large-scale nonconvex problem, hindering the application of current layout optimization methods. To increase the computational efficiency, we leverage the hierarchy and decomposability of the joint optimization problem and design a decomposition-based hybrid method (DBHM). Instead of manipulating all the variables simultaneously, the joint optimization problem is decomposed into several subproblems and their coordination. Case studies are carried out on different WFs. It is shown that WF layouts with higher energy yields can be obtained by the proposed joint optimization compared to traditional separate layout optimization. Moreover, the computational advantages of the proposed DBHM on the considered joint layout optimization problem are also demonstrated.

math.OC↗

arXiv2021

Achieving an Accurate Random Process Model for PV Power using Cheap Data: Leveraging the SDE and Public Weather Reports

The stochastic differential equation (SDE)-based random process models of volatile renewable energy sources (RESs) jointly capture the evolving probability distribution and temporal correlation in continuous time. It has enabled recent studies to remarkably improve the performance of power system dynamic uncertainty quantification and optimization. However, considering the non-homogeneous random process nature of PV, there still remains a challenging question: how can a realistic and accurate SDE model for PV power be obtained that reflects its weather-dependent uncertainty in online operation, especially when high-resolution numerical weather prediction (NWP) is unavailable for many distributed plants? To fill this gap, this article finds that an accurate SDE model for PV power can be constructed by only using the cheap data from low-resolution public weather reports. Specifically, an hourly parameterized Jacobi diffusion process is constructed to recreate the temporal patterns of PV volatility during a day. Its parameters are mapped from the public weather report using an ensemble of extreme learning machines (ELMs) to reflect the varying weather conditions. The SDE model jointly captures intraday and intrahour volatility. Statistical examination based on real-world data collected in Macau shows the proposed approach outperforms a selection of state-of-the-art deep learning-based time-series forecast methods.

cs.LG↗

arXiv2021

Realization of high-fidelity CZ gates in extensible superconducting qubits design with a tunable coupler

High-fidelity two-qubits gates are essential for the realization of large-scale quantum computation and simulation. Tunable coupler design is used to reduce the problem of parasitic coupling and frequency crowding in many-qubit systems and thus thought to be advantageous. Here we design a extensible 5-qubit system in which center transmon qubit can couple to every four near-neighbor qubit via a capacitive tunable coupler and experimentally demonstrate high-fidelity controlled-phase (CZ) gate by manipulating center qubit and one near-neighbor qubit. Speckle purity benchmarking (SPB) and cross entrophy benchmarking (XEB) are used to assess the purity fidelity and the fidelity of the CZ gate. The average purity fidelity of the CZ gate is 99.69$\pm$0.04\% and the average fidelity of the CZ gate is 99.65$\pm$0.04\% which means the control error is about 0.04\%. Our work will help resovle many chanllenges in the implementation of large scale quantum systems.

quant-ph↗

arXiv2021

Quantum Computational Advantage via 60-Qubit 24-Cycle Random Circuit Sampling

To ensure a long-term quantum computational advantage, the quantum hardware should be upgraded to withstand the competition of continuously improved classical algorithms and hardwares. Here, we demonstrate a superconducting quantum computing systems \textit{Zuchongzhi} 2.1, which has 66 qubits in a two-dimensional array in a tunable coupler architecture. The readout fidelity of \textit{Zuchongzhi} 2.1 is considerably improved to an average of 97.74\%. The more powerful quantum processor enables us to achieve larger-scale random quantum circuit sampling, with a system scale of up to 60 qubits and 24 cycles. The achieved sampling task is about 6 orders of magnitude more difficult than that of Sycamore [Nature \textbf{574}, 505 (2019)] in the classic simulation, and 3 orders of magnitude more difficult than the sampling task on \textit{Zuchongzhi} 2.0 [arXiv:2106.14734 (2021)]. The time consumption of classically simulating random circuit sampling experiment using state-of-the-art classical algorithm and supercomputer is extended to tens of thousands of years (about $4.8\times 10^4$ years), while \textit{Zuchongzhi} 2.1 only takes about 4.2 hours, thereby significantly enhancing the quantum computational advantage.

quant-ph↗

arXiv2021

Experimental Quantum Generative Adversarial Networks for Image Generation

Quantum machine learning is expected to be one of the first practical applications of near-term quantum devices. Pioneer theoretical works suggest that quantum generative adversarial networks (GANs) may exhibit a potential exponential advantage over classical GANs, thus attracting widespread attention. However, it remains elusive whether quantum GANs implemented on near-term quantum devices can actually solve real-world learning tasks. Here, we devise a flexible quantum GAN scheme to narrow this knowledge gap, which could accomplish image generation with arbitrarily high-dimensional features, and could also take advantage of quantum superposition to train multiple examples in parallel. For the first time, we experimentally achieve the learning and generation of real-world hand-written digit images on a superconducting quantum processor. Moreover, we utilize a gray-scale bar dataset to exhibit the competitive performance between quantum GANs and the classical GANs based on multilayer perceptron and convolutional neural network architectures, respectively, benchmarked by the Fréchet Distance score. Our work provides guidance for developing advanced quantum generative models on near-term quantum devices and opens up an avenue for exploring quantum advantages in various GAN-related learning tasks.

quant-ph↗

arXiv2021

Deep Learning-Aided Model Predictive Control of Wind Farms for AGC Considering the Dynamic Wake Effect

To provide automatic generation control (AGC) service, wind farms (WFs) are required to control their operation dynamically to track the time-varying power reference. Wake effects impose significant aerodynamic interactions among turbines, which remarkably influence the WF dynamic power production. The nonlinear and high-dimensional nature of dynamic wake model, however, brings extremely high computation complexity and obscure the design of WF controllers. This paper overcomes the control difficulty brought by the dynamic wake model by proposing a novel control-oriented reduced order WF model and a deep-learning-aided model predictive control (MPC) method. Leveraging recent advances in computational fluid dynamics (CFD) to provide high-fidelity data that simulates WF dynamic wake flows, two novel deep neural network (DNN) architectures are specially designed to learn a dynamic WF reduced-order model (ROM) that can capture the dominant flow dynamics. Then, a novel MPC framework is constructed that explicitly incorporates the obtained WF ROM to coordinate different turbines while considering dynamic wake interactions. The proposed WF ROM and the control method are evaluated in a widely-accepted high-dimensional dynamic WF simulator whose accuracy has been validated by realistic measurement data. A 9-turbine WF case and a larger 25-turbine WF case are studied. By reducing WF model states by many orders of magnitude, the computational burden of the control method is reduced greatly. Besides, through the proposed method, the range of AGC signals that can be tracked by the WF in the dynamic operation is extended compared with the existing greedy controller.

math.OC↗

arXiv2021

Quantum walks on a programmable two-dimensional 62-qubit superconducting processor

Quantum walks are the quantum mechanical analogue of classical random walks and an extremely powerful tool in quantum simulations, quantum search algorithms, and even for universal quantum computing. In our work, we have designed and fabricated an 8x8 two-dimensional square superconducting qubit array composed of 62 functional qubits. We used this device to demonstrate high fidelity single and two particle quantum walks. Furthermore, with the high programmability of the quantum processor, we implemented a Mach-Zehnder interferometer where the quantum walker coherently traverses in two paths before interfering and exiting. By tuning the disorders on the evolution paths, we observed interference fringes with single and double walkers. Our work is an essential milestone in the field, brings future larger scale quantum applications closer to realization on these noisy intermediate-scale quantum processors.

quant-ph↗