Searcharxiv⌕ Search

arXiv subjects

Jin Liu

Publications and source records attributed to Jin Liu.

At least 199 records · Page 11Linked to original sources

LSMM: A statistical approach to integrating functional annotations with genome-wide association studies

Thousands of risk variants underlying complex phenotypes (quantitative traits and diseases) have been identified in genome-wide association studies (GWAS). However, there are still two major challenges towards deepening our understanding of the genetic architectures of complex phenotypes. First, the majority of GWAS hits are in the non-coding region and their biological interpretation is still unclear. Second, accumulating evidence from GWAS suggests the polygenicity of complex traits, i.e., a complex trait is often affected by many variants with small or moderate effects, whereas a large proportion of risk variants with small effects remains unknown. The availability of functional annotation data enables us to address the above challenges. In this study, we propose a latent sparse mixed model (LSMM) to integrate functional annotations with GWAS data. Not only does it increase statistical power of the identification of risk variants, but also offers more biological insights by detecting relevant functional annotations. To allow LSMM scalable to millions of variants and hundreds of functional annotations, we developed an efficient variational expectation-maximization (EM) algorithm for model parameter estimation and statistical inference. We first conducted comprehensive simulation studies to evaluate the performance of LSMM. Then we applied it to analyze 30 GWAS of complex phenotypes integrated with 9 genic category annotations and 127 tissue-specific functional annotations from the Roadmap project. The results demonstrate that our method possesses more statistical power over conventional methods, and can help researchers achieve deeper understanding of genetic architecture of these complex phenotypes.

stat.ME↗

1305 nm MoTe2-on-silicon Laser

The missing piece in the jigsaw of silicon photonics is a light source that can be easily incorporated into the standard silicon fabrication process. Recent advances in the development of atomically thin layers of semiconducting transition metal dichalogenides (TMDs), with direct bandgaps in the near-infrared region, have opened up new possibilities for addressing this need. Here, we report a unique silicon laser source that employs molybdenum ditelluride (MoTe2) as a gain material in a photonic crystal nanocavity resonator, fabricated in silicon-on-insulator. We demonstrate optically pumped MoTe2-on-silicon devices lasing at 1305 nm, i.e. in the centre of the O-band used in optical communications, operating in the continuous-wave (CW) regime, at room temperature and with a threshold power density as low as 1.5 kW/cm2. This 2D-on-silicon geometry offers the promise of an integrated low-cost electrically pumped nanoscale silicon light source, thereby adding an essential building block to the silicon photonics platform.

cond-mat.mes-hall↗

A Parametric Investigation on the Cyclotron Maser Instability Driven by Ring-beam Electrons with Intrinsic Alfvén Waves

The electron-cyclotron maser is a process that generates intense and coherent radio emission in plasma. In this paper, we present a comprehensive parametric investigation on the electron-cyclotron-maser instability driven by non-thermal ring-beam electrons with intrinsic Alfvén waves which pervade the solar atmosphere and interplanetary space. It is found that both forward propagating and backward propagating waves can be excited in the fast ordinary (O) and extraordinary (X) electromagnetic modes. The growth rates of X1 mode are almost always weakened by Alfvén waves. The average pitch-angle $ϕ_0$ of electrons is a key parameter for the effect of Alfvén waves on the growth rate of modes O1, O2 and X2. For a beam-dominated electron distribution ($ϕ_0 \lesssim 30^\circ$ ), the growth rates of the maser instability for O1, O2 and X2 modes are enhanced with the increase of Alfvén wave energy density. In other conditions, the growth rates of O1, O2 and X2 modes weakened with increasing Alfvén wave intensity, except that the growth of O1 mode may also be enhanced by Alfvén waves for a ring distribution. The results may be important for us in analyzing the mechanism of radio bursts with various fine structures observed in space and astrophysical plasmas.

physics.space-ph↗

White light emission from silicon nanoparticles

As one of the most important semiconductors, silicon (Si) has been used to fabricate electronic devices, waveguides, detectors, and solar cells etc. However, its indirect bandgap hinders the use of Si for making good emitters1. For integrated photonic circuits, Si-based emitters with sizes in the range of 100-300 nm are highly desirable. Here, we show that efficient white light emission can be realized in spherical and cylindrical Si nanoparticles with feature sizes of ~200 nm. The up-converted luminescence appears at the magnetic and electric multipole resonances when the nanoparticles are resonantly excited at their magnetic and electric dipole resonances by using femtosecond (fs) laser pulses with ultralow low energy of ~40 pJ. The lifetime of the white light is as short as ~52 ps, almost three orders of magnitude smaller than the state-of-the-art results reported so far for Si (~10 ns). Our finding paves the way for realizing efficient Si-based emitters compatible with current semiconductor fabrication technology, which can be integrated to photonic circuits.

physics.optics↗

Deterministic implementation of a bright, on-demand single photon source with near-unity indistinguishability via quantum dot imaging

Deterministic techniques enabling the implementation and engineering of bright and coherent solid-state quantum light sources are key for the reliable realization of a next generation of quantum devices. Such a technology, at best, should allow one to significantly scale up the number of implemented devices within a given processing time. In this work, we discuss a possible technology platform for such a scaling procedure, relying on the application of nanoscale quantum dot imaging to the pillar microcavity architecture, which promises to combine very high photon extraction efficiency and indistinguishability. We discuss the alignment technology in detail, and present the optical characterization of a selected device which features a strongly Purcell-enhanced emission output. This device, which yields an extraction efficiency of $η=(49\pm4)~\%$, facilitates the emission of photons with $(94\pm2.7)~\%$ indistinguishability.

physics.optics↗

Cryogenic photoluminescence imaging system for nanoscale positioning of single quantum emitters

We report a photoluminescence imaging system for locating single quantum emitters with respect to alignment features. Samples are interrogated in a 4~K closed-cycle cryostat by a high numerical aperture (NA=0.9, 100$\times$ magnification) objective that sits within the cryostat, enabling high efficiency collection of emitted photons without image distortions due to the cryostat windows. The locations of single InAs/GaAs quantum dots within a $>50$~$μ$m~$\times$~50~$μ$m field of view are determined with $\approx4.5$~nm uncertainty (one standard deviation) in a 1~s long acquisition. The uncertainty is determined through a combination of a maximum likelihood estimate for localizing the quantum dot emission, and a cross-correlation method for determining the alignment mark center. This location technique can be an important step in the high-throughput creation of nanophotonic devices that rely upon the interaction of highly confined optical modes with single quantum emitters.

quant-ph↗

Combined atomic force microscopy and photoluminescence imaging to select single InAs/GaAs quantum dots for quantum photonic devices

We report on a combined photoluminescence imaging and atomic force microscopy study of single, isolated self-assembled InAs quantum dots (density <0.01 um^(-2) capped by a 95 nm GaAs layer, and emitting around 950 nm. By combining optical and scanning probe characterization techniques, we determine the position of single quantum dots with respect to comparatively large (100 nm to 1000 nm in-plane dimension) topographic features. We find that quantum dots often appear (>25% of the time) in the vicinity of these features, but generally do not exhibit significant differences in their non-resonantly pumped emission spectra in comparison to quantum dots appearing in defect-free regions. This behavior is observed across multiple wafers produced in different growth chambers. Our characterization approach is relevant to applications in which single quantum dots are embedded within nanofabricated photonic devices, where such large surface features can affect the interaction with confined optical fields and the quality of the single-photon emission. In particular, we anticipate using this approach to screen quantum dots not only based on their optical properties, but also their surrounding surface topographies.

cond-mat.mes-hall↗

A heterogeneous III-V/silicon integration platform for on-chip quantum photonic circuits with single quantum dot devices

Photonic integration is an enabling technology for photonic quantum science, offering greater scalability, stability, and functionality than traditional bulk optics. Here, we describe a scalable, heterogeneous III-V/silicon integration platform to produce Si$_3$N$_4$ photonic circuits incorporating GaAs-based nanophotonic devices containing self-assembled InAs/GaAs quantum dots. We demonstrate pure singlephoton emission from individual quantum dots in GaAs waveguides and cavities - where strong control of spontaneous emission rate is observed - directly launched into Si$_3$N$_4$ waveguides with > 90 % efficiency through evanescent coupling. To date, InAs/GaAs quantum dots constitute the most promising solidstate triggered single-photon sources, offering bright, pure and indistinguishable emission that can be electrically and optically controlled. Si$_3$N$_4$ waveguides offer low-loss propagation, tailorable dispersion and high Kerr nonlinearities, desirable for linear and nonlinear optical signal processing down to the quantum level. We combine these two in an integration platform that will enable a new class of scalable, efficient and versatile integrated quantum photonic devices

physics.optics↗

Efficient fiber-coupled single-photon source based on quantum dots in a photonic-crystal waveguide

Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupler is recorded first on an independent device containing an on-chip reflector. Reflection measurements establish that the chip-to-fiber coupling efficiency exceeds 80 %. The detailed characterization of a high-efficiency photonic-crystal waveguide extended with a tapered out-coupling section is then performed. The corresponding overall single-photon source efficiency is 10.9 % $\pm$ 2.3 %, which quantifies the success probability to prepare an exciton in the quantum dot, couple it out as a photon in the waveguide, and subsequently transfer it to the fiber. The applied out-coupling method is robust, stable over time, and broadband over several tens of nanometers, which makes it a highly promising pathway to increase the efficiency and reliability of planar chip-based single-photon sources.

quant-ph↗

Efficient silicon metasurfaces for visible light

Dielectric metasurfaces require high refractive index contrast materials for optimum performance. This requirement imposes a severe restraint; devices have either been demonstrated at wavelengths of 700nm and above using high-index semiconductors such as silicon, or they use lower index dielectric materials such as TiO$_{2}$ or Si$_{3}$N$_{4}$ and operate in the visible wavelength regime. Here, we show that the high refractive index of silicon can be exploited at wavelengths as short as 532 nm by demonstrating a silicon metasurface with a transmission efficiency of 47% at this wavelength. The metasurface consists of a graded array of silicon posts arranged in a square lattice on a quartz substrate. We show full 2π phase control and we experimentally demonstrate polarization-independent beam deflection at 532nm wavelength. The crystalline silicon is placed on a quartz substrate by a bespoke layer transfer technique and we note that an efficiency >70% may be achieved for a further optimized structure in the same material. Our results open a new way for realizing efficient metasurfaces based on silicon in the visible wavelength regime.

physics.optics↗

Forward model with space-variant of source size for reconstruction on x-ray radiographic image

Forward imaging technique is the base of combined method on density reconstruction with the forward calculation and inverse problem solution. In the paper, we introduced the projection equation for the radiographic system with areal source blur and detector blur, gained the projecting matrix from any point source to any detector pixel with x-ray trace technique, proposed the ideal on gridding the areal source as many point sources with different weights, and used the blurring window as the effect of the detector blur. We used the forward projection equation to gain the same deviation information about the object edge as the experimental image. Our forward projection equation is combined with Constrained Conjugate Gradient method to form a new method for density reconstruction, XTRACE-CCG. The new method worked on the simulated image of French Test Object and experimental image. The same results have been concluded the affecting range of the blur is decreased and can be controlled to one or two pixels. The method is also suitable for reconstruction of density-variant object. The capability of our method to handle blur effect is useful for all radiographic systems with larger source size comparing to pixel size.

physics.med-ph↗

What Makes it Difficult to Understand a Scientific Literature?

In the artificial intelligence area, one of the ultimate goals is to make computers understand human language and offer assistance. In order to achieve this ideal, researchers of computer science have put forward a lot of models and algorithms attempting at enabling the machine to analyze and process human natural language on different levels of semantics. Although recent progress in this field offers much hope, we still have to ask whether current research can provide assistance that people really desire in reading and comprehension. To this end, we conducted a reading comprehension test on two scientific papers which are written in different styles. We use the semantic link models to analyze the understanding obstacles that people will face in the process of reading and figure out what makes it difficult for human to understand a scientific literature. Through such analysis, we summarized some characteristics and problems which are reflected by people with different levels of knowledge on the comprehension of difficult science and technology literature, which can be modeled in semantic link network. We believe that these characteristics and problems will help us re-examine the existing machine models and are helpful in the designing of new one.

cs.CL↗

Penalized integrative analysis under the accelerated failure time model

For survival data with high-dimensional covariates, results generated in the analysis of a single dataset are often unsatisfactory because of the small sample size. Integrative analysis pools raw data from multiple independent studies with comparable designs, effectively increases sample size, and has better performance than meta-analysis and single-dataset analysis. In this study, we conduct integrative analysis of survival data under the accelerated failure time (AFT) model. The sparsity structures of multiple datasets are described using the homogeneity and heterogeneity models. For variable selection under the homogeneity model, we adopt group penalization approaches. For variable selection under the heterogeneity model, we use composite penalization and sparse group penalization approaches. As a major advancement from the existing studies, the asymptotic selection and estimation properties are rigorously established. Simulation study is conducted to compare different penalization methods and against alternatives. We also analyze four lung cancer prognosis datasets with gene expression measurements.

stat.ME↗

An adaptive Simulated Annealing-based satellite observation scheduling method combined with a dynamic task clustering strategy

Efficient scheduling is of great significance to rationally make use of scarce satellite resources. Task clustering has been demonstrated to realize an effective strategy to improve the efficiency of satellite scheduling. However, the previous task clustering strategy is static. That is, it is integrated into the scheduling in a two-phase manner rather than in a dynamic fashion, without expressing its full potential in improving the satellite scheduling performance. In this study, we present an adaptive Simulated Annealing based scheduling algorithm aggregated with a dynamic task clustering strategy (or ASA-DTC for short) for satellite observation scheduling problems (SOSPs). First, we develop a formal model for the scheduling of Earth observing satellites. Second, we analyze the related constraints involved in the observation task clustering process. Thirdly, we detail an implementation of the dynamic task clustering strategy and the adaptive Simulated Annealing algorithm. The adaptive Simulated Annealing algorithm is efficient, with the endowment of some sophisticated mechanisms, i.e. adaptive temperature control, tabu-list based revisiting avoidance mechanism, and intelligent combination of neighborhood structures. Finally, we report on experimental simulation studies to demonstrate the competitive performance of ASA-DTC. Moreover, we show that ASA-DTC is especially effective when SOSPs contain a large number of targets or these targets are densely distributed in a certain area.

cs.AI↗

A Penalized Multi-trait Mixed Model for Association Mapping in Pedigree-based GWAS

In genome-wide association studies (GWAS), penalization is an important approach for identifying genetic markers associated with trait while mixed model is successful in accounting for a complicated dependence structure among samples. Therefore, penalized linear mixed model is a tool that combines the advantages of penalization approach and linear mixed model. In this study, a GWAS with multiple highly correlated traits is analyzed. For GWAS with multiple quantitative traits that are highly correlated, the analysis using traits marginally inevitably lose some essential information among multiple traits. We propose a penalized-MTMM, a penalized multivariate linear mixed model that allows both the within-trait and between-trait variance components simultaneously for multiple traits. The proposed penalized-MTMM estimates variance components using an AI-REML method and conducts variable selection and point estimation simultaneously using group MCP and sparse group MCP. Best linear unbiased predictor (BLUP) is used to find predictive values and the Pearson's correlations between predictive values and their corresponding observations are used to evaluate prediction performance. Both prediction and selection performance of the proposed approach and its comparison with the uni-trait penalized-LMM are evaluated through simulation studies. We apply the proposed approach to a GWAS data from Genetic Analysis Workshop (GAW) 18.

stat.ME↗

Integrative Analysis of Prognosis Data on Multiple Cancer Subtypes using Penalization

In cancer research, profiling studies have been extensively conducted, searching for genes/SNPs associated with prognosis. Cancer is a heterogeneous disease. Examining similarity and difference in the genetic basis of multiple subtypes of the same cancer can lead to better understanding of their connections and distinctions. Classic meta-analysis approaches analyze each subtype separately and then compare analysis results across subtypes. Integrative analysis approaches, in contrast, analyze the raw data on multiple subtypes simultaneously and can outperform meta-analysis. In this study, prognosis data on multiple subtypes of the same cancer are analyzed. An AFT (accelerated failure time) model is adopted to describe survival. The genetic basis of multiple subtypes is described using the heterogeneity model, which allows a gene/SNP to be associated with the prognosis of some subtypes but not the others. A compound penalization approach is developed to conduct gene-level analysis and identify genes that contain important SNPs associated with prognosis. The proposed approach has an intuitive formulation and can be realized using an iterative algorithm. Asymptotic properties are rigorously established. Simulation shows that the proposed approach has satisfactory performance and outperforms meta-analysis using penalization. An NHL (non-Hodgkin lymphoma) prognosis study with SNP measurements is analyzed. Genes associated with the three major subtypes, namely DLBCL, FL, and CLL/SLL, are identified. The proposed approach identifies genes different from alternative analysis and has reasonable prediction performance.

stat.ME↗

An Anderson-localized random nanolaser

Precision is a virtue throughout science in general and in optics in particular where carefully fabricated nanometer-scale devices hold great promise for both classical and quantum photonics [1-6]. In such nanostructures, unavoidable imperfections often impose severe performance limits but, in certain cases, disorder may enable new functionalities [7]. Here we demonstrate on-chip random nanolasers where the cavity feedback is provided by the intrinsic disorder in a semiconductor photonic-crystal waveguide, leading to Anderson localization of light [8]. This enables highly efficient and broadband tunable lasers with very small mode volumes. We observe an intriguing interplay between gain, dispersion-controlled slow light, and disorder, which determines the cross-over from ballistic transport to Anderson localization. Such a behavior is a unique feature of non-conservative random media that enables the demonstration of all-optical control of random lasing. Our statistical analysis shows a way towards ultimate thresholdless random nanolasers.

physics.optics↗

High-Q optomechanical GaAs nanomembranes

We present a simple fabrication method for the realization of suspended GaAs nanomembranes for cavity quantum optomechanics experiments. GaAs nanomembranes with an area of 1.36 mm by 1.91 mm and a thickness of 160 nm are obtained by using a two-step selective wet-etching technique. The frequency noise spectrum reveals several mechanical modes in the kilohertz regime with mechanical Q-factors up to 2,300,000 at room temperature. The measured mechanical mode profiles agree well with a taut rectangular drumhead model. Our results show that GaAs nanomembranes provide a promising path towards quantum optical control of massive nanomechanical systems.

cond-mat.mes-hall↗