arXiv subjects

Jin-Peng Li

Publications and source records attributed to Jin-Peng Li.

10 recordsLinked to original sources

arXiv2026

Mid-infrared high-sensitive cavity-free in-situ CO gas sensing based on up-conversion detection

Carbon monoxide (CO) is a significant indicator gas with considerable application value in atmospheric monitoring, industrial production and medical diagnosis. Its fundamental vibrational band locates around 4.6 $\upmu$m and has larger absorption line strength than that of overtone band, which is more suitable for the precise identification and concentration detection of CO. In this paper, the up-conversion detection is employed to convert the mid-infrared absorption signal obtained by TDLAS to the visible light band, then a silicon-based detector is utilized for detection. By which, we can achieve the highest sensitivity of 79.6 ppb under the condition of cavity-free in-situ with an absorption range length of only 0.14 m. Furthermore, the single-photon level real-time detection of CO concentration after the diffuse reflection is realized by using SPAD. This work demonstrates the merits of the up-conversion detection in terms of its functionality at room temperature and capacity for sensitivity detection. Furthermore, it presents a design and optimization methodology that has the potential to underpin the advancement of the method towards more practical applications, like industrial process monitoring, medical diagnosis and so on.

physics.optics↗

arXiv2026

Broadband Tunable Photon-Pair Generation and Spectrum Measurement Based on Noncritical Lithium Niobate Crystals

Photon pairs play a vital role in modern science, driving extensive research into their generation. Yet, the narrow phase-matching bandwidth of conventional crystals has largely confined studies to specific wavelengths, leaving research on broadband tunable sources underexplored. Here, we employ a non-critical phase-matched lithium niobate (LN) crystal to generate widely tunable photon pairs. The generated near-infrared (NIR) photon pairs exhibit a high coincidence-to-accidental ratio (CAR > 20 dB) and are tunable across the 800-1600 nm range. We further showcase the utility of NIR photon pairs in spectroscopy by detecting carbon monoxide (CO) gas absorption. This approach will facilitate the design of advanced LN-based photonic experiments.

physics.optics↗

arXiv2026

Passive Incoherent Ultrafast Mid-Infrared Upconversion Imaging and Its Calibration

Ultrafast mid-infrared (MIR) imaging is a key enabling capability for monitoring transient thermal and plasma phenomena in scientific diagnostics and industrial safety. However, conventional cryogenic MIR cameras face a fundamental trade-off between frame rate, noise, and pixel format. Here we report a passive, incoherent MIR imaging platform that leverages sum-frequency upconversion in chirped periodically poled lithium niobate (CPLN) to translate broadband 3--5um scenes to the near-infrared, enabling ultrafast acquisition on a silicon-based intensified CCD (iCCD). In fast-kinetics mode we achieve a physical frame rate of 100kHz with microsecond-scale gate control, and we directly capture the full evolution of an air-breakdown electric arc, resolving its rapid ignition, expansion, and decay dynamics. Beyond demonstrating ultrafast passive imaging, we introduce a drift-aware calibration workflow based on Allan deviation analysis to quantitatively select the gate width and averaging strategy under realistic slow-drift and multiplicative noise. This combined capability -- ultrafast passive MIR imaging plus operationally meaningful calibration -- provides a practical route toward real-time thermal surveillance and early-warning systems for hazardous fast transients.

physics.optics↗

arXiv2025

High resolution up-conversion imaging in the 10 μm band under incoherent illumination

Long-wavelength infrared band exhibits significant utility in thermal signature acquisition and molecular spectral analysis, among other applications. The up-conversion detection technique enables effective signal transduction into the detection bandwidth of silicon-based photodetectors, thereby facilitating high-sensitivity photonic measurements. We realized high-resolution up-conversion imaging for incoherent thermal targets in the 10 μm spectral regime for the first time. Furthermore, this work presents the first derivation of analytical models characterizing depth of field and astigmatic aberration in up-conversion imaging systems, which show excellent agreement between theoretical and experimental results. The results demonstrate generalisability to various up-conversion imaging systems, thus providing critical insights for the design and optimisation of such systems.

physics.optics↗

arXiv2021

Heralded non-destructive quantum entangling gate with single-photon sources

Heralded entangling quantum gates are an essential element for the implementation of large-scale optical quantum computation. Yet, the experimental demonstration of genuine heralded entangling gates with free-flying output photons in linear optical system, was hindered by the intrinsically probabilistic source and double-pair emission in parametric down-conversion. Here, by using an on-demand single-photon source based on a semiconductor quantum dot embedded in a micro-pillar cavity, we demonstrate a heralded controlled-NOT (CNOT) operation between two single photons for the first time. To characterize the performance of the CNOT gate, we estimate its average quantum gate fidelity of ($87.8\pm1.2$)%. As an application, we generated event-ready Bell states with a fidelity of ($83.4\pm2.4$)%. Our results are an important step towards the development of photon-photon quantum logic gates.

quant-ph↗

arXiv2019

Quantum interference between light sources separated by 150 million kilometers

We report an experiment to test quantum interference, entanglement and nonlocality using two dissimilar photon sources, the Sun and a semiconductor quantum dot on the Earth, which are separated by 150 million kilometers. By making the otherwise vastly distinct photons indistinguishable all degrees of freedom, we observe time-resolved two-photon quantum interference with a raw visibility of 0.796(17), well above the 0.5 classical limit, providing the first evidence of quantum nature of thermal light. Further, using the photons with no common history, we demonstrate post-selected two-photon entanglement with a state fidelity of 0.826(24), and a violation of Bell's inequality by 2.20(6). The experiment can be further extended to a larger scale using photons from distant stars, and open a new route to quantum optics experiments at an astronomical scale.

quant-ph↗

arXiv2019

Towards optimal single-photon sources from polarized microcavities

An optimal single-photon source should deterministically deliver one and only one photon at a time, with no trade-off between the source's efficiency and the photon indistinguishability. However, all reported solid-state sources of indistinguishable single photons had to rely on polarization filtering which reduced the efficiency by 50%, which fundamentally limited the scaling of photonic quantum technologies. Here, we overcome this final long-standing challenge by coherently driving quantum dots deterministically coupled to polarization-selective Purcell microcavities--two examples are narrowband, elliptical micropillars and broadband, elliptical Bragg gratings. A polarization-orthogonal excitation-collection scheme is designed to minimize the polarization-filtering loss under resonant excitation. We demonstrate a polarized single-photon efficiency of 0.60+/-0.02 (0.56+/-0.02), a single-photon purity of 0.975+/-0.005 (0.991+/-0.003), and an indistinguishability of 0.975+/-0.006 (0.951+/-0.005) for the micropillar (Bragg grating) device. Our work provides promising solutions for truly optimal single-photon sources combining near-unity indistinguishability and near-unity system efficiency simultaneously.

quant-ph↗

arXiv2019

Coherently driving a single quantum two-level system with dichromatic laser pulses

Efficient excitation of a single two-level system usually requires that the driving field is at the same frequency as the atomic transition. However, the scattered laser light in solid-state implementations can dominate over the single photons, imposing an outstanding challenge to perfect single-photon sources. Here, we propose a background-free method using a phase-locked dichromatic electromagnetic field with no spectral overlap with the optical transition for a coherent control of a two-level system, and we demonstrate this method experimentally with a single quantum dot embedded in a micropillar. Single photons generated by pi excitation show a purity of 0.988(1) and indistinguishability of 0.962(6). Further, the phase-coherent nature of the two-color excitation is captured by the resonance-fluorescence intensity dependence on the relative phase between the two pulses. Our two-color excitation method adds a useful toolbox to the study of atom-photon interaction, and the generation of spectrally isolated indistinguishable single photons.

quant-ph↗

arXiv2018

Polarized indistinguishable single photons from a quantum dot in an elliptical micropillar

The key challenge to scalable optical quantum computing, boson sampling, and quantum metrology is sources of single photons with near-unity system efficiency and simultaneously near-perfect indistinguishability in all degrees of freedom (including spectral, temporal, spatial, and polarization). However, previous high-indistinguishability solid-state single-photon sources had to rely on polarization filtering that reduced the system efficiency by at least 50%. Here, we overcome this challenge by developing a new single-photon source based on a coherently driven quantum dot embedded in an elliptical micropillar. The asymmetric cavity lifts the polarization degeneracy into two orthogonal linearly polarized modes with a suitable energy separation. We design an excitation-collection scheme that allows the creation and collection of single photons with an indistinguishability of 0.976(1) and a degree of polarization of 91%. Our method provides a solution of combining near-unity system efficiency and indistinguishability compatible with background-free resonant excitation, and opens the way to truly optimal single-photon sources for scalable photonic quantum technologies.

physics.optics↗

arXiv2017

Multi-photon boson-sampling machines beating early classical computers

Boson sampling is considered as a strong candidate to demonstrate the quantum computational supremacy over classical computers. However, previous proof-of-principle experiments suffered from small photon number and low sampling rates owing to the inefficiencies of the single-photon sources and multi-port optical interferometers. Here, we develop two central components for high-performance boson sampling: robust multi-photon interferometers with 0.99 transmission rate, and actively demultiplexed single-photon sources from a quantum-dot-micropillar with simultaneously high efficiency, purity and indistinguishability. We implement and validate 3-, 4-, and 5-photon boson sampling, and achieve sampling rates of 4.96 kHz, 151 Hz, and 4 Hz, respectively, which are over 24,000 times faster than the previous experiments, and over 220 times faster than obtaining one sample through calculating the matrices permanent using the first electronic computer (ENIAC) and transistorized computer (TRADIC) in the human history. Our architecture is feasible to be scaled up to larger number of photons and with higher rate to race against classical computers, and might provide experimental evidence against the Extended Church-Turing Thesis.

quant-ph↗