Searcharxiv⌕ Search

arXiv subjects

Jincheng Wang

Publications and source records attributed to Jincheng Wang.

86 records · Page 5Linked to original sources

The formation and decay of sunspot penumbra in Active Region NOAA 12673

To better understand the formation and decay of sunspot penumbra, we studied the evolution of sunspots in the three regions of the active-region NOAA 12673 in detail. The evolution of sunspots in the three regions were all involved in the interaction of two magnetic field systems: the pre-existing magnetic field system and the later emerging magnetic field system. Through analyzing the photospheric magnetic field properties, it is found that the formation of the penumbra originated from the newly emerging magnetic bipole that were trapped in the photosphere. The change of magnetic fields in penumbra from horizontal to vertical can cause the disappearance of penumbra. The transformation of the magnetic field between the umbra and the penumbra is found and the outward moat flow around sunspot gradually decreased and vanished during the decay of sunspot. In addition, we found that the mean longitudinal magnetic strength in penumbra decreased and the mean transverse magnetic strength in penumbra increased with the increasing penumbral area during the formation of sunspots. However, during the decay of sunspots, the mean longitudinal magnetic strength in penumbra increased and the mean transverse magnetic strength in penumbra decreased with the decreasing penumbral area. Comparatively, the dependence of the area and the mean transverse/longitudinal magnetic field strength in umbra is not remarkable. These results reveal that the formation and decay process of umbra are different with penumbra.

astro-ph.SR↗

Formation and material supply of an active-region filament associated with newly emerging flux

With the observations of SDO/AIA 304 Å and NVST Hα bands, we present the formation process of an active-region filament in active region NOAA 11903 during the period from 02:00 UT to 10:00 UT on November 25, 2013. A series of jets occurring in the vicinity of the south-western footpoint of the filament directly ejected cool and hot plasma to filament height and supplied material for the filament. Some newly emerging flux is found in the vicinity of the filament south-western footpoint during these jets. In this paper, we mainly focus on the material supply of the filament. The plasma mass uploaded by the jets and the mass of the filament are estimated, which manifests the fact that the mass carried by jets can supply sufficient material for the formation of the filament. We found two types of jets. one is H-alpha jet, and the other is EUV jet. The significant finding is that some cool jets seen in the Hα band but not in the SDO/AIA bands also could eject the cool material for the filament. These results suggest that cool plasma in the low atmosphere can be directly injected into the upper atmosphere and become the filament material by two types of jets. Moreover, the newly emerging flux with non-potential field plays an important role in the appearances of the jets and the magnetic structure of the filament.

astro-ph.SR↗

Mechanical relaxation and fracture of phase field crystals

A computational method is developed for the study of mechanical response and fracture behavior of phase field crystals (PFC), to overcome a limitation of the PFC dynamics which lacks an effective mechanism for describing fast mechanical relaxation of the material system. The method is based on a simple interpolation scheme for PFC (IPFC) making use of a condition of the displacement field to satisfy local elastic equilibration, while preserving key characteristics of the original PFC model. We conduct a systematic study on the mechanical properties of a sample nanoribbon system with honeycomb lattice symmetry subjected to uniaxial tension, for numerical validation of the IPFC scheme and the comparison with the original PFC and modified PFC methods. Results of mechanical response, in both elasticity and fracture regimes, show the advantage and efficiency of the IPFC method across different system sizes and applied strain rates, due to its effective process of mechanical equilibration. A brittle fracture behavior is obtained in IPFC calculations, where effects of system temperature and chirality on the fracture strength and Young's modulus are also identified, with results agreeing with those found in previous atomistic simulations of graphene. The IPFC scheme developed here is generic and applicable to the mechanical studies using different types of PFC free energy functionals designed for various material systems.

cond-mat.mtrl-sci↗

Formation of an active region filament driven by a series of jets

We present a formation process of a filament in active region NOAA 12574 during the period from 2016 August 11 to 12. Combining the observations of GONG H$α$, Hida spectrum and SDO/AIA 304 A, the formation process of the filament is studied. It is found that cool material ($T\sim10^4$ K) is ejected by a series of jets originating from the western foot-point of the filament. Simultaneously, the magnetic flux emerged from the photosphere in the vicinity of the western foot-point of the filament. These observations suggest that cool material in the low atmosphere can be directly injected into the upper atmosphere and the jets are triggered by the magnetic reconnection between pre-existing magnetic fields and new emerging magnetic fields. Detailed study of a jet at 18:02 UT on August 11 with GST/BBSO TiO observations reveals that some dark threads appeared in the vicinity of the western foot-point after the jet and the projection velocity of plasma along the filament axis was about 162.6$\pm$5.4 km/s. Using with DST/Hida observations, we find that the injected plasma by a jet at 00:42 UT on August 12 was rotating. Therefore, we conclude that the jets not only supplied the material for the filament, but also injected the helicity into the filament simultaneously. Comparing the quantity of mass injection by the jets with the mass of the filament, we conclude that the estimated mass loading by the jets is sufficient to account for the mass in the filament.

astro-ph.SR↗

Speed-dependent ice bandings in freezing colloidal suspensions

Formation mechanism of speed-dependent ice bandings in freezing colloidal suspensions, of significance in frost heaving and materials science, remains a mystery. With quantitative experiments, we propose a possible mechanism of speed-dependent ice bandings by focusing on the particle packing density and dynamic interface undercooling. The particle packing density ahead of the freezing interface decreases with increasing pulling speeds, attributed to the speed-dependent packing of particles. Through affecting the curvature undercooling of pore ices, the speed-dependent packing of particles can be used to explain speed-dependent thicknesses of ice bandings. The dynamic interface undercooling was obtained to explore curvature undercooling of pore ices and quantitative details of transient interface positions, speeds and undercooling were given. All the evidences imply that the speed-dependent particle packing and dynamic interface undercooling are responsible for speed-dependent ice bandings.

cond-mat.mtrl-sci↗

Dynamic particle packing in freezing colloidal suspensions

In the field of freezing colloidal suspensions, it is important to understand the particle-scale behavior of particle packing. Here, we reveal the dynamics of particle packing by identifying the behavior of each single particle in situ. The typical pattern consists of locally ordered clusters and amorphous defects. The microscopic mechanism of pattern formation is ascribed to the non-equilibrium particle-packing process on the particle scale, described with the Péclet number. The macroscopic migration of a particle layer is also revealed by an analytical model involving parameters of freezing speed and initial volume fraction of particles.

cond-mat.mtrl-sci↗

Interfacial undercooling in the solidification of colloidal suspensions-analyses with quantitative measurements

Interfacial undercooling is of significant importance on microscopic pattern formation in the solidification of colloidal suspensions. Two kinds of interfacial undercooling are supposed to be involved in freezing colloidal suspensions, i.e. solute constitutional supercooling (SCS) caused by additives in the solvent and particulate constitutional supercooling (PCS) caused by particles. However, quantitatively identification of the interfacial undercooling of freezing colloidal suspensions is still absent and it is still unknown which undercooling is dominant. The revealing of interfacial undercooling is closely related to the design of ice-templating porous materials. Based on quantitative experimental measurements, we show that the interfacial undercooling mainly comes from SCS caused by the additives in the solvent, while the PCS can be ignored. This finding implies that the PCS theory is not the fundamental physical mechanism for patterning in the solidification of colloidal suspensions. Instead, the patterns in ice-templating method can be controlled effectively by adjusting the additives.

cond-mat.mtrl-sci↗

Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures

The CoCrFeNi alloy is widely accepted as an exemplary stable base for high entropy alloys (HEAs). Although various investigations prove it to be stable solid solution, its phase stability is still suspicious. Here, we identified that the CoCrFeNi HEA was thermally metastable at intermediate temperatures, and composition decomposition occurred after annealed at 750oC for 800 hrs. The increased lattice distortion induced by minor addition of Al into the CoCrFeNi base accelerated the composition decomposition and a second fcc phase with a different lattice constant occurred in the long time annealed CoCrFeNiAl0.1 HEA. A Cr-rich σ phase also precipitated from the CoCrFeNiAl0.1 HEA. The Al element can induce the instability of CoCrFeNi HEA. The revealed metastable CoCrFeNi at intermediate temperatures will greatly change the way of HEAs development.

cond-mat.mtrl-sci↗

Spin-lattice coupling mediated multiferroicity in (ND4)2FeCl5D2O

We report a neutron diffraction study of the multiferroic mechanism in (ND4)2FeCl5D2O, a molecular compound that exhibits magnetically induced ferroelectricity. This material exhibits two successive magnetic transitions on cooling: a long-range order transition to an incommensurate (IC) collinear sinusoidal spin state at TN=7.3 K, followed by a second transition to an IC cycloidal spin state at TFE=6.8 K, the later of which is accompanied by spontaneous ferroelectric polarization. The cycloid structure is strongly distorted by spin-lattice coupling as evidenced by the observations of both odd and even higher-order harmonics associated with the cycloid wave vector, and a weak commensurate phase that coexists with the IC phase. The appearance of the 2nd-order harmonic coincides with the onset of the electric polarization, thereby providing unambiguous evidence that the induced electric polarization is mediated by the spin-lattice interaction. Our results for this system, in which the orbital angular momentum is expected to be quenched, are remarkably similar to those of the prototypical TbMnO3, in which the magnetoelectric effect is attributed to spin-orbit coupling.

cond-mat.str-el↗

Can secondary nucleation exist in ice banding of freezing colloidal suspensions?

The formation mechanism of ice banding in the system of freezing colloidal suspensions, which is of significance in frost heaving, ice-templating porous materials and biological materials, still remains a mystery. Recently, the theory of secondary nucleation and growth of ice has been proposed to explain the emergence of a new ice lens. However, this theory has not been quantitatively examined. Here, we quantitatively measured the initial interfacial undercooling of a new ice lens and the nucleation undercoolings of suspensions. We found that the interfacial undercooling can not satisfy the nucleation undercooling of ice and hence disprove the secondary nucleation mechanism for ice banding.

cond-mat.mtrl-sci↗

Interface instability modes in freezing colloidal suspensions - revealed from onset of planar instability

Freezing colloidal suspensions widely exists in nature and industry. Interface instability has attracted much attention for the understandings of the pattern formation in freezing colloidal suspensions. However, the interface instability modes, the origin of the ice banding or ice lamellae, are still unclear. In-situ experimental observation of the onset of interface instability is still absent up to now. Here, by directly imaging the initial transient stage of planar interface instability in directional freezing colloidal suspensions, we proposed three interface instability modes, Mullins-Sekerka instability, global split instability and local split instability. All the three instability modes come from the competition of the solute boundary layer and the particle boundary layer, which only can be revealed from the initial transient stage of planar instability in directional freezing.

cond-mat.mtrl-sci↗

In situ observation the interface undercooling of freezing colloidal suspensions with differential visualization method

Interface undercooling is one of the most significant parameters in the solidification of colloidal suspensions. However, quantitative measurement of interface undercooling of colloidal suspensions is still a challenge. Here, a new experimental facility and gauging method are designed to directly reveal the interface undercooling on both static and dynamic cases. The interface undercooling is visualized through the discrepancy of solid/liquid interface positions between the suspensions and its solvent in a thermal gradient apparatus. The resolutions of the experimental facility and gauging method are proved to be 0.01 K. The high precision of the method comes from the principle of converting temperature measurement into distance measurement in the thermal gradient platform. Moreover, both static and dynamic interface undercoolings can be quantitatively measured.

cond-mat.mtrl-sci↗

Liquid crystalline growth within a phase-field crystal model

By using a phase-field crystal (PFC) model, the liquid-crystal growth of the plastic triangular phase is simulated with emphasis on crystal shape and topological defect formation. The equilibrium shape of a plastic triangular crystal (PTC) grown from a isotropic phase is compared with that grown from a columnar/smectic A (CSA) phase. While the shape of a PTC nucleus in the isotropic phase is almost identical to that of a classical PFC model, the shape of a PTC nucleus in CSA is affected by the orientation of stripes in the CSA phase, and irregular hexagonal, elliptical, octagonal, and rectangular shapes are obtained. Concerning the dynamics of the growth process we analyse the topological structure of the nematic-order, which starts from nucleation of $+\frac{1}{2}$ and $-\frac{1}{2}$ disclination pairs at the PTC growth front and evolves into hexagonal cells consisting of $+1$ vortices surrounded by six satellite $-\frac{1}{2}$ disclinations. It is found that the orientational and the positional order do not evolve simultaneously, the orientational order evolves behind the positional order, leading to a large transition zone, which can span over several lattice spacings.

cond-mat.soft↗

Pairing fluctuation effects in a strongly coupled color superfluid/superconductor

We investigate the effects of pairing fluctuations in fermionic superfluids/superconductors where pairing occurs among three species (colors) of fermions. Such color superfluids/superconductors can be realized in three-component atomic Fermi gases and in dense quark matter. The superfluidity/superconductivity is characterized by a three-component order parameter which denotes the pairing among the three colors of fermions. Due to the SU$(3)$ symmetry of the Hamiltonian, one color does not participate pairing. This branch of fermionic excitation is gapless in the naive BCS mean-field description. In this paper, we adopt a pairing-fluctuation theory to investigate the pairing fluctuation effects on the unpaired color in strongly coupled atomic color superfluids and quark color superconductors. At low temperature, a large pairing gap of the paired colors suppresses the pairing fluctuation effects for the unpaired color, and the spectral density of the unpaired color shows a single Fermi-liquid peak, which indicates the naive mean-field picture remains valid. As the temperature is increased, the spectral density of the unpaired color generally exhibits a three-peak structure: the Fermi-liquid peak remains but get suppressed, and two pseudogap-like peaks appears. At and above the superfluid transition temperature, the Fermi-liquid peak disappears completely and the all three colors exhibits pseudogap-like spectral density. The coexistence of Fermi liquid and pseudogap behavior is generic for both atomic color superfluids and quark color superconductors.

nucl-th↗