arXiv subjects

Jinfeng Du

Publications and source records attributed to Jinfeng Du.

At least 37 records · Page 2Linked to original sources

arXiv2023

Measured and Modeled Outdoor Indoor Coverage at 28 GHz into High Thermal Efficiency Buildings

28 GHz outdoor-indoor coverage into modern office buildings with high thermal efficiency windows is found to be severely limited due to 46 dB median penetration loss at normal incidence and additional 15 dB median oblique incidence loss. The study is based on measurements of path gain over 280 outdoor-indoor links, at ranges up to 100 m. A simple theoretical path gain model is extended to include building penetration through multiple sides of the building as well as a reflection from another building. The theoretical model accounts for the building orientation relative to the source, resulting in 4.9 dB RMSE relative to data, as compared to 5.7 dB RMSE from a linear fit and 14.7 dB RMSE for the 3GPP recommended model. Only coarse description of the buildings is required: building orientation and exterior wall composition, without any interior details. Coverage range for SNR>-8 dB from an outdoor base to a terminal just inside a high-efficiency building is under 35 m

cs.NI↗

arXiv2023

Sampling and Reconstructing Angular Domains with Uniform Arrays

The surge of massive antenna arrays in wireless networks calls for the adoption of analog/hybrid array solutions, where multiple antenna elements are driven by a common radio front end to form a beam along a specific angle in order to maximize the beamforming gain. Many heuristics have been proposed to sample the angular domain by trading off between sampling step size and overhead, where arbitrarily small angular step size is only attainable with infinite sampling overhead. We show that, for uniform linear and rectangular arrays, lossless reconstruction of the array's angular responses at arbitrary angular precision is possible using a finite number of samples without resorting to assumptions of angular sparsity. The proposed method, sampling and reconstructing angular domain (SARA), defines how many and which angles to be sampled and the corresponding reconstruction. This general solution to scan the angular domain can therefore be applied not only to beam acquisition and channel estimation, but also to radio imaging techniques, making it a candidate for future integrated sensing and communications (ISAC). Extensive simulation results for target detection and radio imaging have demonstrated clear advantages of SARA versus other considered baselines, both in terms of angular reconstruction performance and computational complexity.

eess.SP↗

arXiv2023

Energy Efficient Extreme MIMO: Design Goals and Directions

Ever since the invention of Bell Laboratories Layer Space-Time (BLAST) in mid 1990s, the focus of MIMO research and development has been largely on pushing the limit of spectral efficiency. While massive MIMO technologies laid the foundation of high spectrum efficiency in 5G and beyond, the challenge remains in improving energy efficiency given the increasing complexity of the associated radio systems. With the substantial negative implications of climate change looming ever closer, minimizing energy use is a key dimension of achieving sustainability and is of paramount importance for any future technology. Thus, every aspect of future extreme MIMO system design, implementation, and operation will be scrutinized to maximize energy efficiency. An analysis of the massive MIMO 5G radio energy consumption at different loads leads to qualitative energy efficiency design goals for emerging extreme MIMO systems. Following this, we focus on novel operational and component technology innovations to minimize energy consumption.

eess.SP↗

arXiv2023

Precoding-oriented Massive MIMO CSI Feedback Design

Downlink massive multiple-input multiple-output (MIMO) precoding algorithms in frequency division duplexing (FDD) systems rely on accurate channel state information (CSI) feedback from users. In this paper, we analyze the tradeoff between the CSI feedback overhead and the performance achieved by the users in systems in terms of achievable rate. The final goal of the proposed system is to determine the beamforming information (i.e., precoding) from channel realizations. We employ a deep learning-based approach to design the end-to-end precoding-oriented feedback architecture, that includes learned pilots, users' compressors, and base station processing. We propose a loss function that maximizes the sum of achievable rates with minimal feedback overhead. Simulation results show that our approach outperforms previous precoding-oriented methods, and provides more efficient solutions with respect to conventional methods that separate the CSI compression blocks from the precoding processing.

cs.IT↗

arXiv2022

A wideband generalization of the near-field region for extremely large phased-arrays

The narrowband and far-field assumption in conventional wireless system design leads to a mismatch with the optimal beamforming required for wideband and near-field systems. This discrepancy is exacerbated for larger apertures and bandwidths. To characterize the behavior of near-field and wideband systems, we derive the beamforming gain expression achieved by a frequency-flat phased array designed for plane-wave propagation. To determine the far-field to near-field boundary for a wideband system, we propose a frequency-selective distance metric. The proposed far-field threshold increases for frequencies away from the center frequency. The analysis results in a fundamental upper bound on the product of the array aperture and the system bandwidth. We present numerical results to illustrate how the gain threshold affects the maximum usable bandwidth for the n260 and n261 5G NR bands.

eess.SP↗

arXiv2022

Outdoor-to-Indoor 28 GHz Wireless Measurements in Manhattan: Path Loss, Environmental Effects, and 90% Coverage

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.

eess.SP↗

arXiv2022

Dense Urban Outdoor-Indoor Coverage from 3.5 to 28 GHz

In the US, people spend 87% of their time indoors and have an average of four connected devices per person (in 2020). As such, providing indoor coverage has always been a challenge but becomes even more difficult as carrier frequencies increase to mmWave and beyond. This paper investigates the outdoor and outdoor-indoor coverage of an urban network comparing globally standardized building penetration models and implementing models to corresponding scenarios. The glass used in windows of buildings in the grid plays a pivotal role in determining the outdoor-to-indoor propagation loss. For 28 GHz with 1 W/polarization transmit power in the urban street grid, the downlink data rates for 90% of outdoor users are estimated at over 250 Mbps. In contrast, 15% of indoor users are estimated to be in outage, with SNR $<-$3 dB when base stations are 400 m apart with one-fifth of the buildings imposing high penetration loss ($\sim$ 35 dB). At 3.5 GHz, base stations may achieve over 250 Mbps for 90% indoor users if 400 MHz bandwidth with 100 W/polarization transmit power is available. The methods and models presented can be used to facilitate decisions regarding the density and transmit power required to provide high data rates to majority users in urban centers.

eess.SP↗

arXiv2022

Polar Coded Modulation via Hybrid Bit Labeling

Bit-interleaved coded modulation (BICM) and multilevel coded modulation (MLC) are commonly used to combine polar codes with high order modulation. While BICM benefits from simple design and the separation of coding and modulation, MLC shows better performance under successive-cancellation decoding. In this paper we propose a hybrid polar coded modulation scheme that lies between BICM and MLC, wherein a fraction of bits are assigned to set-partition (SP) labeling and the remaining bits are assigned for Gray labeling. The SP labeled bits undergo sequential demodulation, using iterative demodulation and polar decoding similar to MLC, whereas the Gray labeled bits are first demodulated in parallel and then sent for decoding similar to BICM. Either polar codes or other channel codes (such as LDPC codes) can be used for the Gray labeled bits. For length 2048 rate 1/2 polar code on 256-QAM, the performance gap between BICM (Gray labeling only) and MLC (SP labeling only) can be almost fully closed by the hybrid scheme. Notably, the hybrid scheme has a significant latency advantage over MLC. These performance gains make the proposed scheme attractive for future communication systems such as 6G.

cs.IT↗

arXiv2022

Machine Learning-based Urban Canyon Path Loss Prediction using 28 GHz Manhattan Measurements

Large bandwidth at mm-wave is crucial for 5G and beyond but the high path loss (PL) requires highly accurate PL prediction for network planning and optimization. Statistical models with slope-intercept fit fall short in capturing large variations seen in urban canyons, whereas ray-tracing, capable of characterizing site-specific features, faces challenges in describing foliage and street clutter and associated reflection/diffraction ray calculation. Machine learning (ML) is promising but faces three key challenges in PL prediction: 1) insufficient measurement data; 2) lack of extrapolation to new streets; 3) overwhelmingly complex features/models. We propose an ML-based urban canyon PL prediction model based on extensive 28 GHz measurements from Manhattan where street clutters are modeled via a LiDAR point cloud dataset and buildings by a mesh-grid building dataset. We extract expert knowledge-driven street clutter features from the point cloud and aggressively compress 3D-building information using convolutional-autoencoder. Using a new street-by-street training and testing procedure to improve generalizability, the proposed model using both clutter and building features achieves a prediction error (RMSE) of $4.8 \pm 1.1$ dB compared to $10.6 \pm 4.4$ dB and $6.5 \pm 2.0$ dB for 3GPP LOS and slope-intercept prediction, respectively, where the standard deviation indicates street-by-street variation. By only using four most influential clutter features, RMSE of $5.5\pm 1.1$ dB is achieved.

cs.IT↗

arXiv2022

Universal Path Gain Laws for Common Wireless Communication Environments

Simple and accurate expressions for path gain are derived from electromagnetic fundamentals in a wide variety of common environments, including Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) indoor urban canyons, urban/rural macro, outdoor-indoor and suburban streets with vegetation. Penetration into a scattering region, sometimes aided by guiding, is the "universal" phenomenon shared by the diverse morphologies. Root Mean Square (RMS) errors against extensive measurements are under 5 dB, better than 3GPP models by 1-12 dB RMS, depending on environment. In urban canyons the models have 4.7 dB RMS error, as compared to 7.9 dB from linear fit to data and 13.9/17.2 dB from LOS/NLOS 3GPP models. The theoretical path gains depend on distance as a power law with exponents from a small set {1.5, 2, 2.5, 4}, specific to each morphology. This provides a theoretical justification for widely used power law empirical models. Only coarse environmental data is needed as parameters: street width, building height, vegetation depth, wall material and antenna heights.

cs.IT↗

arXiv2020

Directional Measurements in Urban Street Canyons from Macro Rooftop Sites at 28 GHz for 90% Outdoor Coverage

Path gain and effective directional gain in azimuth in urban canyons from actual rooftop base station sites are characterized based on a massive data set of 3000 links on 12 streets in two cities, with over 21 million individual continuous wave power measurements at 28 GHz using vertically polarized antennas. Large street-to-street path gain variation is found, with median street path gain varying over 30 dB at similar distances. Coverage in the street directly illuminated by a roof edge antenna is found to suffer an average excess loss of 11 dB relative to free space at 200 m, with empirical slope-intercept fit model representing the data with 7.1 dB standard deviation. Offsetting the base antenna 5 m away from roof edge, as is common in macro cellular deployments, introduces an additional average loss of 15 dB at 100 m, but this additional loss reduces with distance. Around the corner loss is well modeled by a diffraction formula with an empirically obtained diffraction coefficient. Effective azimuthal gain degradation due to scatter is limited to 2 dB for 90% of data, supporting effective use of high gain antennas in urban street canyons.

eess.SP↗

arXiv2020

Path Loss and Directional Gain Measurements at 28 GHz for non-Line-of-Sight Coverage of Indoors with Corridors

Adequate coverage with high gain antennas is key to realizing the full promise of the bandwidth available at mm/cm wave bands. We report extensive indoor measurements at 28 GHz (1000 links, 9.9 million individual power measurements, 10 offices, 2 buildings), with/without line-of-sight (LOS) using a continuous wave channel sounder, with a 10o spinning horn, capable of capturing a full azimuth scan every 200 ms, in up to 171 dB path loss to characterize coverage with 90% confidence level. The environment had prominent corridors and rooms, as opposed to open/mixed offices in latest 3GPP standards. Guiding in corridors leads to much lower RMS azimuth spread (7 degree median in corridor non-LOS vs. 42 degree in 3GPP) and higher penetration loss into rooms and around corners (30-32 dB, some 12 dB more loss than 3GPP at 20 m non-LOS). Measured path gain in non-LOS is predicted by a mode-diffusion model with 3.9 dB RMS error. Scattering degraded azimuth gain by up to 4 dB in the corridor and 7 dB in rooms with 90% probability. Link simulations in a canonical building indicate every corridor needs an access point to provide 1 Gbps rate to adjoining rooms within 50 m using 400 MHz of bandwidth.

cs.IT↗

arXiv2019

Beamforming Learning for mmWave Communication: Theory and Experimental Validation

To establish reliable and long-range millimeter-wave (mmWave) communication, beamforming is deemed to be a promising solution. Although beamforming can be done in the digital and analog domains, both approaches are hindered by several constraints when it comes to mmWave communications. For example, performing fully digital beamforming in mmWave systems involves using many radio frequency (RF) chains, which are expensive and consume high power. This necessitates finding more efficient ways for using fewer RF chains while taking advantage of the large antenna arrays. One way to overcome this challenge is to employ (partially or fully) analog beamforming through proper configuration of phase-shifters. Existing works on mmWave analog beam design either rely on the knowledge of the channel state information (CSI) per antenna within the array, require a large search time (e.g., exhaustive search) or do not guarantee a minimum beamforming gain (e.g., codebook based beamforming). In this paper, we propose a beam design technique that reduces the search time and does not require CSI while guaranteeing a minimum beamforming gain. The key idea derives from observations drawn from real-life measurements. It was observed that for a given propagation environment (e.g., coverage area of a mmWave BS) the azimuthal angles of dominant signals could be more probable from certain angles than others. Thus, pre-collected measurements could used to build a beamforming codebook that regroups the most probable beam designs. We invoke Bayesian learning for measurements clustering. We evaluate the efficacy of the proposed scheme in terms of building the codebook and assessing its performance through real-life measurements. We demonstrate that the training time required by the proposed scheme is only 5% of that of exhaustive search. This crucial gain is obtained while achieving a minimum targeted beamforming gain.

cs.IT↗

arXiv2019

Matching in the Air: Optimal Analog Beamforming under Angular Spread

Gbps wireless transmission over long distance at high frequency bands has great potential for 5G and beyond, as long as high beamforming gain could be delivered at affordable cost to combat the severe path loss. With limited number of RF chains, the effective beamwidth of a high gain antenna will be "widened" by channel angular spread, resulting in gain reduction. In this paper, we formulate the analog beamforming as a constrained optimization problem and present closed form solution that maximizes the effective beamforming gain. The optimal beam pattern of antenna array turns out to "match" the channel angular spread, and the effectiveness of the theoretical results has been verified by numerical evaluation via exhaustive search and system level simulation using 3D channel models. Furthermore, we propose an efficient angular spread estimation method using as few as three power measurements and validate its accuracy by lab measurements using a $16{\times}16$ phased array at 28 GHz. The capability of estimating angular spread and matching the beam pattern on the fly enables high effective gain using low cost analog/hybrid beamforming implementation, and we demonstrate a few examples where substantial gain can be achieved through array geometry optimization.

cs.IT↗

arXiv2019

Suburban Fixed Wireless Access Channel Measurements and Models at 28 GHz for 90% Outdoor Coverage

Achieving adequate coverage with high gain antennas is key to realizing the full promise of the wide bandwidth available at cm/mm bands. We report extensive outdoor measurements at 28 GHz in suburban residential areas in New Jersey and Chile, with over 2000 links measured for same-street link types (vegetation blocked LOS) from 13 streets and other-street link types (true NLOS) from 7 streets, using a specialized narrowband channel sounder at ranges reaching 200 m. The measurements, applicable to fixed wireless access, involved a 55$^\circ$ transmit antenna placed on the exterior of a street-facing window and a 10$^\circ$ receive horn antenna spinning on top of a van mast at 3 m height, emulating a lamppost-mounted base station. Measured path gain-distance dependence is well represented by power-law models, and azimuth gains at the base are degraded through scattering by more than 4.3 dB for 10% of links. It was found that, with 51 dBm EIRP at the base station and 11 dBi antenna at an outdoor mounted terminal, 1 Gbps downlink rate can be delivered up to 100 m from a base station deployed in the same street with 90% coverage guarantee.

cs.IT↗

arXiv2018

Suburban Residential Building Penetration Loss at 28 GHz for Fixed Wireless Access

Fixed wireless access at mm/cm bands has been proposed for high-speed broadband access to suburban residential customers and building penetration loss is a key parameter. We report a measurement campaign at 28 GHz in a New Jersey suburban residential neighborhood for three representative single-family homes. A base antenna is mounted at 3-meter height, emulating a base station on a lamppost, moves down the street up to 200 meters. A customer premises equipment (CPE) device, acting as relay to provide indoor coverage throughout the desired area, is mounted either on the exterior of a street-facing window or 1.5 meters behind the window. The median indoor-outdoor path gain difference, corresponding to the extra loss by moving the window-mounted CPE indoor, is found to be 9 dB for the house with low-loss materials and plain-glass windows, and 17 dB for the house with low-emissivity windows and foil-backed insulation. These losses are in addition to other losses (e.g., vegetation blockage) in comparison to free space propagation.

cs.IT↗

arXiv2018

Gbps User Rates Using mmWave Relayed Backhaul with High Gain Antennas

Delivering Gbps high user rate over long distances (around 1 km) is challenging, and the abundant spectrum available in millimeter wave band cannot solve the challenge by its own due to the severe path loss and other limitations. Since it is economically challenging to deploy wired backhaul every few hundred meters, relays (e.g., wireless access points) have been proposed to extend the coverage of a base station which has wired connection to the core network. These relays, deployed every few hundred meters, serve the users in their vicinity and are backhauled to the base station through wireless connections. In this work, the wireless relayed backhaul design has been formulated as a topology-bandwidth-power joint optimization problem, and the influence of path loss, angular spread, array size, and RF power limitation on the user rate has been evaluated. It has been shown that for a linear network deployed along the street at 28 GHz, when high joint directional gain (50 dBi) is available, 1 Gbps user rate within cell range of 1 km can be delivered using 1.5 GHz of bandwidth (using single polarization antennas). The user rates drop precipitously when joint directional gain is reduced, or when the path loss is much more severe. When the number of RF chains is limited, the benefit of larger arrays will eventually be surpassed by the increased channel estimation penalty as the effective beamforming gain saturates owing to the channel angular spread.

cs.IT↗

arXiv2017

How Much Spectrum is Too Much in Millimeter Wave Wireless Access

A great increase in wireless access rates might be attainable by using the large amount of spectrum available in the millimeter wave (mmWave, 30 - 300 GHz) band. However, due to higher propagation losses inherent in these frequencies, to use wider bandwidth for transmission at ranges beyond 100 meters or in non-line-of-sight (NLOS) settings may be ineffective or even counterproductive when the penalty for estimating the channel is taken into account. In this work we quantify the maximum beneficial bandwidth for mmWave transmission in some typical deployment scenarios which use pilot-based channel estimation and assume a minimum mean square error (MMSE) channel estimator at the receiver. We find that for an I.I.D. block fading model with coherence time $T_c$ and coherence bandwidth $B_c$, for transmitters and receivers equipped with a single antenna, the optimal (rate-maximizing) signal-to-noise-ratio is a constant that only depends on the product $B_cT_c$, which measures the channel coherence and equals the average number of orthogonal symbols per each independent channel coefficient. That is, for fixed channel coherence, the optimal bandwidth scales linearly with the received signal power. Under some typical deployment scenarios with both transmit and receive side beamforming, 1 GHz bandwidth can be too much.

cs.IT↗