arXiv subjects

Jing Kong

Publications and source records attributed to Jing Kong.

80 records · Page 5Linked to original sources

arXiv2011

Delay Analysis of Graphene Field-Effect Transistors

In this letter, we analyze the carrier transit delay in graphene field-effect transistors (GFETs). GFETs are fabricated at the wafer-scale on sapphire substrate. For a device with a gate length of 210 nm, a current gain cut-off frequency fT of 18 GHz and 22 GHz is obtained before and after de-embedding. The extraction of the internal (Cgs,i, Cgd,i) and external capacitances (Cgs,ex and Cgd,ex) from the scaling behavior of the gate capacitances Cgs and Cgd allows the intrinsic (τ_int), extrinsic (τ_ext) and parasitic delays (τ_par) to be obtained. In addition, the extraction of the intrinsic delay provides a new way to directly estimate carrier velocity from the experimental data while the breakdown of the total delay into intrinsic, extrinsic, and parasitic components can offer valuable information for optimizing RF GFETs structures.

cond-mat.mes-hall↗

arXiv2011

Observation of Electronic Raman Scattering in Metallic Carbon Nanotubes

We present experimental measurements of the electronic contribution to the Raman spectra of individual metallic single-walled carbon nanotubes (MSWNTs). Photoexcited carriers are inelastically scattered by a continuum of low-energy electron-hole pairs created across the graphenelike linear electronic subbands of the MSWNTs. The optical resonances in MSWNTs give rise to well-defined electronic Raman peaks. This resonant electronic Raman scattering is a unique feature of the electronic structure of these one-dimensional quasimetals.

cond-mat.mes-hall↗

arXiv2011

Nonlinear THz Conductivity Dynamics in CVD-Grown Graphene

We report strong THz-induced transparency in CVD-grown graphene where 92%-96% of the peak-field is transmitted compared to 74% at lower field strength. Time-resolved THz-pump/THz-probe studies reveal that the absorption recovers in 2-3 ps. The induced transparency is believed to arise from nonlinear pumping of carriers in graphene which suppresses the mobility and consequently the conductivity in a spectral region where the light-matter interaction is particularly strong.

cond-mat.mtrl-sci↗

arXiv2009

Anisotropic Etching and Nanoribbon Formation in Single-Layer Graphene

We demonstrate anisotropic etching of single-layer graphene by thermally-activated nickel nanoparticles. Using this technique, we obtain sub-10nm nanoribbons and other graphene nanostructures with edges aligned along a single crystallographic direction. We observe a new catalytic channeling behavior, whereby etched cuts do not intersect, resulting in continuously connected geometries. Raman spectroscopy and electronic measurements show that the quality of the graphene is resilient under the etching conditions, indicating that this method may serve as a powerful technique to produce graphene nanocircuits with well-defined crystallographic edges.

cond-mat.mtrl-sci↗

arXiv2009

Growth of large-area single- and bi-layer graphene by controlled carbon precipitation on polycrystalline Ni surfaces

We report graphene films composed mostly of one or two layers of graphene grown by controlled carbon precipitation on the surface of polycrystalline Ni thin films during atmospheric chemical vapor deposition(CVD). Controlling both the methane concentration during CVD and the substrate cooling rate during graphene growth can significantly improve the thickness uniformity. As a result, one- or two- layer graphene regions occupy up to 87% of the film area. Single layer coverage accounts for 5-11% of the overall film. These regions expand across multiple grain boundaries of the underlying polycrystalline Ni film. The number density of sites with multilayer graphene/graphite (>2 layers) is reduced as the cooling rate decreases. These films can also be transferred to other substrates and their sizes are only limited by the sizes of the Ni film and the CVD chamber. Here, we demonstrate the formation of films as large as 1 in2. These findings represent an important step towards the fabrication of large-scale high-quality graphene samples.

cond-mat.mtrl-sci↗

arXiv2006

Tomonaga-Luttinger Liquid Features in Ballistic Single-Walled Carbon Nanotubes: Conductance and Shot Noise

We study the electrical transport properties of well-contacted ballistic single-walled carbon nanotubes in a three-terminal configuration at low temperatures. We observe signatures of strong electron-electron interactions: the conductance exhibits bias-voltage-dependent amplitudes of quantum interference oscillation, and both the current noise and Fano factor manifest bias-voltage-dependent power-law scalings. We analyze our data within the Tomonaga-Luttinger liquid model using the non-equilibrium Keldysh formalism and find qualitative and quantitative agreement between experiment and theory.

cond-mat.mes-hall↗

arXiv2005

Orbital Kondo effect in carbon nanotubes

Progress in the fabrication of nanometer-scale electronic devices is opening new opportunities to uncover the deepest aspects of the Kondo effect, one of the paradigmatic phenomena in the physics of strongly correlated electrons. Artificial single-impurity Kondo systems have been realized in various nanostructures, including semiconductor quantum dots, carbon nanotubes and individual molecules. The Kondo effect is usually regarded as a spin-related phenomenon, namely the coherent exchange of the spin between a localized state and a Fermi sea of electrons. In principle, however, the role of the spin could be replaced by other degrees of freedom, such as an orbital quantum number. Here we demonstrate that the unique electronic structure of carbon nanotubes enables the observation of a purely orbital Kondo effect. We use a magnetic field to tune spin-polarized states into orbital degeneracy and conclude that the orbital quantum number is conserved during tunneling. When orbital and spin degeneracies are simultaneously present, we observe a strongly enhanced Kondo effect, with a multiple splitting of the Kondo resonance at finite field and predicted to obey a so-called SU(4) symmetry.

cond-mat.mes-hall↗

arXiv2003

Ballistic Transport in Metallic Nanotubes With Reliable Pd Ohmic Contacts

Contacting metallic single-walled carbon nanotubes by palladium (Pd) affords highly reproducible ohmic contacts and allows for detailed elucidation of ballistic transport in metallic nanotubes. The Pd ohmic contacts are more reliable than titanium (Ti) previously used for ballistic nanotube devices. In contrast, Pt contacts appear to give non-ohmic contacts to metallic nanotubes. For both ohmic and non-ohmic contacts, the length of the nanotube under the metal contact area is electrically turned off. Transport occurs from metal to nanotube at the edges of the contacts. Measurements with large numbers of Pd contacted nanotube samples reveal that the mean free path for defect scattering in SWNTs grown by chemical vapor deposition can be up to 4 microns. The mean free paths for acoustic phonon scattering are on the order of 500 nm at room temperature and >> 4 microns at low temperatures.

cond-mat↗