arXiv subjects

Jinhan Guo

Publications and source records attributed to Jinhan Guo.

At least 19 recordsLinked to original sources

arXiv2026

Modeling of Coronal Mass Ejection Originated from a Sheared Arcade of Realistic Active-Region Scale and Its Propagation in the Heliosphere: Methodology

Simulating coronal mass ejections (CMEs) from their origin in active regions (ARs) to their propagation to Earth remains challenging, particularly when aiming to resolve AR scales and employ realistic magnetic field strengths without compromising computational efficiency. Here we present a methodology for end-to-end CME modeling that addresses these challenges. Three nested magnetohydrodynamic simulations are coupled to jointly cover the heliosphere from solar surface to beyond $1.5$ au. A block-structured adaptive mesh refinement scheme is employed to achieve $\sim 700$ km resolution in the low corona, allowing AR scales to be resolved while maintaining the total grid count below $10^8$ across the entire computational domain. A semi-relativistic Boris correction combined with a relativistic mass-density factor is used to handle magnetic field strengths up to $10^3$ G without prohibitively small time steps. Using this model, we simulate the emergence of a bipolar AR into the corona, the initiation of a CME by shearing of the AR core field and the subsequent evolution. Our simulation captures its pre-eruption energy buildup, triggering by magnetic reconnection, rapid acceleration, and propagation to 1 au and beyond. The simulated CME exhibits a three-part structure in synthetic coronagraph images and a torus-shaped flux rope in the heliosphere, with synthetic in-situ observations showing shock formation, density compression, and a prolonged southward $B_z$ component at 1 au. The entire simulation requires about one day on a moderately sized cluster (e.g., $600$ processors), while the simulated CME takes three days to arrive at $1$ au, offering a lead time of two days if used for forecasting.

astro-ph.SR↗

arXiv2026

Deflection of a Filament Eruption with Three Parallel Flare Ribbons via Reconnection at an X-Point

On 2024 May 6, Active Region 13663 produced an X4.5-class flare associated with a filament eruption that exhibited remarkable rotation and deflection dynamics. This study aims to investigate two key aspects of this event: the formation mechanisms of the complex flare ribbon structures and the physical drivers behind the observed filament deflection. We conduct a data-constrained magnetohydrodynamic simulation using the zero-beta approximation to reconstruct the filament's evolution. Through detailed analysis of quasi-separatrix layers (QSLs) and their comparison with observed flare ribbons, we establish crucial connections between magnetic topology and flare morphology. First, our simulation successfully reproduces key observational features of the eruption. Then, we connect the flare ribbon morphology with calculated QSLs. Finally, we find filament deflection resulting from localized reconnection at the X-point, as evidenced by Lorentz force decomposition. We demonstrate that reconnection above two current channels of opposite helicity governs the eruption dynamics, with magnetic pressure gradients driving flux rope deflection while magnetic tension force simultaneously restraining arcade ascent. The event features a "sandwich" magnetic configuration including double parallel polarity inversion lines with strong shear component. We suggest that this particular configuration could serve as a plausible formation mechanism for the observed parallel three-ribbon structure. In addition, the evolution of QSLs and flare ribbons provides clear evidence of reconnection between two flux ropes.

astro-ph.SR↗

arXiv2026

On the Constraints and Observational Manifestations of Failed Solar Eruptions in Toroidal Magnetic Cage

Observations show that many solar eruptions remain confined within strong overlying magnetic fields, forming a so-called magnetic cage. While confinement by poloidal overlying fields has been widely investigated, the role of strong external toroidal fields remains unclear. Using three-dimensional magnetohydrodynamic simulations, we study confined eruptions in a toroidal magnetic cage, focusing on the interplay between the Lorentz force and magnetic reconnection, and their observational signatures. We further employ a guiding-center test-particle approach to synthesize hard X-ray emission for comparison between thermal and nonthermal responses. We find that overlying toroidal fields play a crucial role in confinement by generating strong return currents that produce a significant downward Lorentz force, suppressing flux rope ascent. At the same time, they induce large-angle rotation of the flux rope, leading to reconnection with overlying fields and eventual break-up. Synthetic EUV emission reveals multi-ribbon flares with highly sheared, globally cowboy-hat-like loop structures. Hard X-ray diagnostics show that thermal and nonthermal emissions are not co-spatial, with return currents acting as an efficient accelerator of energetic electrons. These results demonstrate that toroidal-field-induced forces govern both the confinement and rotation of erupting flux ropes, providing an explanation for failed eruptions even under torus-unstable conditions. These results suggest that the morphology and shearing angle of flare loops are the useful diagnostics for distinguishing confined from eruptive events.

astro-ph.SR↗

arXiv2026

Rotation of a Solar Jet Driven by Plasma Flow along Helical Magnetic Fields in an Active Region

Solar jets, collimated plasma ejections driven by magnetic reconnection, play a vital role in energy transport and coronal heating. While rotational motions in jets are often attributed to magnetic field untwisting, alternative explanatory mechanisms remain possible. This study investigates a rotating jet in an active region observed on 2023 August 1 using multi-wavelength observations from Atmospheric Imaging Assembly (AIA), Chinese Ha Solar Explorer (CHASE), and Interface Region Imaging Spectrograph (IRIS), combined with a self-consistent time-dependent magnetofrictional (TMF) model and magnetohydrodynamic (MHD) simulation. Spectral diagnostics reveal coexisting red and blue shifts along the edges and central axis of the jet, indicating helical plasma motion within a twisted magnetic structure. Numerical simulations demonstrate that the jet's rotation arises from plasma propagating along helical open field lines, formed via reconnection between a pre-existing flux rope and overlying magnetic fields. Contrary to classical untwisting models, both linear and rotational velocities decrease with altitude during the jet propagation. These results highlight that the observed rotation results from plasma spiral motion along twisted fields rather than untwisting dynamics of the magnetic field itself, providing new insights into solar jet energetics and their connection to broader solar phenomena.

astro-ph.SR↗

arXiv2026

Multiple Extreme Ultraviolet Peaks Attributed to Three-dimensional Magnetic Reconnection in a Long-duration Solar Flare

Solar flares are a major driver of hazardous space weather, whose intense electromagnetic emissions and energetic particles can significantly disturb the near-Earth space environment. Therefore, understanding the physical processes during a solar flare and predicting its radiation profiles are of great importance. In this study, we analyze and model an M1.4 two-ribbon long-duration flare, whose multiple extreme-ultraviolet (EUV) emission peaks are found to correspond to different three-dimensional (3D) magnetic reconnections driven by the continuous evolution of a flux rope. In particular, the second and third peaks in the 335 Å EUV channel originate from longer and higher flare loops with extended cooling times, formed by reconnection between flux-rope field lines and ambient sheared-arcade field lines ($ar\text{--}rf$) and between flux-rope field lines themselves ($rr\text{--}rf$). These results are supported by the drifting of the flux-rope footpoint (and flare ribbon) and the decrease in toroidal flux of the flux rope, as well as by the connectivity transfer of representative field lines in the magnetohydrodynamic (MHD) simulation. This work points out, for the first time, new manifestations of the 3D flare scenario in EUV light curves. On the one hand, it provides an explanation for two-ribbon late-phase flares. On the other hand, the conclusions presented here help bridge the gap between imaging observations, EUV light-curve diagnostics, and the magnetic structures of the associated coronal mass ejections.

astro-ph.SR↗

arXiv2026

Elongation of a Solar Filament and its Three-Dimensional Numerical Reconstruction for Magnetic Structures

Quiescent filaments are prominent features of the solar atmosphere, and their evolution reflects the coronal magnetic field's response to photospheric magnetic activity. Here, we report on a quiescent filament observed from 2023 September 28-29, aiming to understand how the magnetic configuration shapes its feet and drives its extension. For this purpose, high-resolution spectral data in H$α$ and Mg II k are used from the Télescope Héliographique pour l'Etude du Magnétisme et des Instabilités Solaires (THEMIS) and the Interface Region Imaging Spectrograph (IRIS), respectively. To track changes in the filament, we utilise long-term data from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) and from the Global Oscillation Network Group (GONG). We analyse the longitudinal magnetic field in the photosphere using the Solar Optical Telescope (SOT) onboard Hinode, as well as SDO/Helioseismic and Magnetic Imager (HMI) data. In addition to this, we use GONG H$α$ data to analyze the longitudinal oscillations in the filament. Observations show that parasitic polarities and canceling flux play a key role in forming and reorganizing the filament feet and in lengthening the filament. A 3D MHD reconstruction using vector magnetograms reveals that its magnetic configuration evolves into a full flux rope (FR), whose extension on the second day matches the observed filament growth. The FR is separated from the surrounding nearly potential field by quasi-separatrix layers, which in turn are separated by current layers. They get more organized around the FR as it is growing up. Moreover, the longitudinal oscillations in the extended filament are attributed to heating from flux cancellation in underlying bright points.

astro-ph.SR↗

arXiv2025

Two-stage primary acceleration in filament initial eruption under a fan-spine magnetic configuration

Understaning the filament rising process is crucial for unveiling the triggering mechanisms of the coronal mass ejections and forecasting the space weather. In this paper, we present a detailed study on the filament initial eruption under a fan-spine structure. It was found that the filament underwent two distinct acceleration stages corresponding to a calss M1.0 and M4.6 flare event, respectively. The first acceleration stage commenced with the filament splitting, after which the upper portion was subsequently heated being a hot channel and slow rose at an average speed of 22 km/s. A set of hot reverse C-shaped loops appeared repeatedly during the filament splitting and a hook structure was recognized at this phase, suggesting ongoing growth of the magnetic flux rope (MFR). When it reached a certain altitude, the hot channel appeared to get into a quasi-static phase with its upper edge seriously decelerated and lower edge expanding downward. Approximately 30 minutes later, as a distinct annular ribbon appeared outside the hook structure, the hot channel rose again at a velocity over 50 km/s accompanied with rapid footpoints drifting, and experienced the second acceleration stage with its axial flux increased to 1.1 X 10^{21} Mx. It is deduced that the filament initial eruption under a magnetic dome possess multi kinetic process. We suggest that the magnetic reconnection taken place within and beneath the filament continues to trigger the growth of pre-eruptive MFR and the first acceleration, when the magnetic reconnection above the filament plays a key role in the second acceleration.

astro-ph.SR↗

arXiv2025

Data-constrained magnetohydrodynamic simulation of global solar corona including solar wind effects within 2.5 $R_\odot$

Total solar eclipses (TSEs) provide a unique opportunity to observe the large-scale solar corona. The solar wind plays an important role in forming the large-scale coronal structure and magnetohydrodynamic (MHD) simulations are used to reproduce it for further studying coronal mass ejections (CMEs). We conduct a data-constrained MHD simulation of the global solar corona including solar wind effects of the 2024 April 8 TSE with observed magnetograms using the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC) within 2.5 $R_\odot$. This TSE happened within the solar maximum, hence the global corona was highly structured. Our MHD simulation includes the energy equation with a reduced polytropic index $γ=1.05$. We compare the global magnetic field for multiple magnetograms and use synchronic frames from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager to initialize the magnetic field configuration from a magneto-frictionally equilibrium solution, called the Outflow field. We detail the initial and boundary conditions employed to time-advance the full set of ideal MHD equations such that the global corona is relaxed to a steady state. The magnetic field, the velocity field, and distributions of the density and thermal pressure are successfully reproduced. We demonstrate direct comparisons with TSE images in white-light and Fe XIV emission augmented with quasi-separatrix layers, the integrated current density, and the synthetic white-light radiation, and find a good agreement between simulations and observations. This provides a fundamental background for future simulations to study the triggering and acceleration mechanisms of CMEs under solar wind effects.

astro-ph.SR↗

arXiv2025

Flare energetics, CME launch and heliospheric propagation for the May 2024 events, as derived from ensemble MHD modelling

Many questions must be answered before understanding the relationship between the emerging magnetic flux through the solar surface and the extreme geoeffective events. The main ingredients for getting X-ray class flares and large interplanetary Coronal Mass Ejections (CMEs) are the build-up of electric current in the corona, the existence of magnetic free energy, magnetic energy/helicity ratio, twist, and magnetic stress in active regions (ARs). The upper limit of solar energy in the space research era, as well as the potential for experiencing superflares and extreme solar events, can be predicted using MHD simulations of CMEs. To address this problem, we consider the recent events of May 2024 and use three MHD models: 1) OHM ("Observationally driven High order scheme Magnetohydrodynamic code") for investigating the magnetic evolutions at a synthetic dipole structure. 2) TMF (time-dependent magneto-friction) for setting up an initial non-potential magnetic field in the active region. A zero-beta MHD model for tracing the magnetic evolution of active regions. 3) EUHFORIA (''European heliospheric forecasting information asset'') for interplanetary CME propagations. For the eruptive flares with CMEs, magnetic solar energy is computed along with data-constrained MHD simulations for the May 2024 events. We show the consistency between the data-initiated realistic simulation of the May 2024 big event and energy scalings from an idealised simulation of a bipolar eruption using OHM. The estimated free magnetic energy did not surpass $5.2 \times 10^{32}\;$erg. Good arrival time predictions ($<3$ hours) are achieved with the EUHFORIA simulation with the cone model. We note the interest in coupling all the chains of codes from the Sun to the Earth and developing different approaches to test the results.

astro-ph.SR↗

arXiv2025

SIP-IFVM: An observation-based magnetohydrodynamic model of coronal mass ejection

Currently, achieving a balance between computational efficiency, accuracy, and numerical stability in CME simulations, particularly in the sub-Alfv{'e}nic coronal region, remains a significant challenge. This paper aims to address the challenge by integrating observational data and developing advanced numerical algorithms, focusing on reproducing large-scale CME evolutions that are consistent with observations in the coronal region. Based on the recently developed fully implicit thermodynamic MHD coronal model (Wang et al. 2025a), we further use an observation-based RBSL flux rope to trigger a CME event during CR 2111. Additionally, we improve the temporal accuracy using a 2nd-order accurate ESDIRK2 method, with the intermediate stage solutions computed by the 2nd-order accurate BDF2 pseudo-time marching method. To enhance the numerical stability of ESDIRK2, we apply approximate linearisation in the implicitly solved intermediate stages. Furthermore, we adjust the time-evolving magnetic field B1 to zero at the end of each physical time step to further validate the extended magnetic field decomposition approach proposed by (Wang et al. 2025a). It is noticed that the model successfully reproduces the CME evolution consistent with white-light coronagraph observations, enables faster-than-real-time CME propagation simulations from solar surface to 0.1 AU using only a few dozen CPU cores on approximately 1 million grid cells, and remains numerically stable in CME simulations involving low-\b{eta} regions. The simulation results show that this novel MHD coronal model, combined with an observation-based magnetic flux rope, is sufficiently numerically stable and computationally efficient to reproduce real CME events propagating through the sub-Alfv{é}nic coronal region. Thus, the observation-based CME model is well suited for practical applications in daily space weather forecasting.

astro-ph.SR↗

arXiv2025

Responses of a Coronal Hole to a Fast Flare-Driven Coronal Wave

Coronal waves, significant solar phenomena, act as diagnostic tools for scientists studying solar atmosphere properties. Here, we present a novel observation detailing how a coronal wave event, associated with an X5.0 class flare, influenced the properties of an adjacent coronal hole through interaction. The coronal wave was observed in both extreme ultraviolet observations from the Atmospheric Imaging Assembly aboard the Solar Dynamics Observatory and Lyman-alpha observations from the Solar Disk Imager aboard the Advanced Space-based Solar Observatory. Utilizing the method of differential emission measure, we found that as the coronal wave passed through, the adjacent coronal hole experienced an increase in temperature from 1.31 to 1.43 MK and a rise in density from $\sim$1.62$\times10^{8}$ to 1.76$\times10^{8}$ cm$^{-3}$ within the rising period of $\sim$7 minutes. Subsequently, after the wave passed, the entire coronal hole transitioned to a new state with a slight temperature increase and a 14$\%$ decrease in density, with more pronounced changes observed at the coronal hole's boundary. Taking into account the impacts of radiative loss and heat conduction, the coronal wave was estimated to provide an average energy of 2.2$\times10^{8}$ erg cm$^{-2}$ to the coronal hole during the short rising period. This study highlights the identification of the coronal wave in both extreme ultraviolet and Lyman-alpha observations, shedding light on the significant energy input, particularly within the coronal hole. These findings provide new insights into better understanding kinematics of fast coronal waves, energy transfer processes open versus closed magnetic topologies, and the possible acceleration of solar winds.

astro-ph.SR↗

arXiv2025

Data-constrained Magnetohydrodynamic Simulation of a Filament Eruption in a Decaying Active Region 13079 on a Global Scale

Filaments are special plasma phenomena embedded in the solar atmosphere, characterized by unique thermodynamic properties and magnetic structures. Magnetohydrodynamic (MHD) simulations are useful to investigate the eruption mechanisms of filaments. We conduct a data-constrained zero-$β$ MHD simulation in spherical coordinates to investigate a C3.5 class flare triggered by an eruptive filament on 2022 August 15 in a decaying weak active region 13079. We reconstruct the three-dimensional coronal magnetic field using vector magnetograms and synoptic maps from the Solar Dynamics Observatory/Helioseismic and Magnetic Imager (SDO/HMI). We transform vector magnetic field into Stonyhurst heliographic spherical coordinates combined with a synoptic map and constructed a potential field source surface (PFSS) model with a magnetic flux rope (MFR) embedded using the Regularized Biot--Savart Laws (RBSL). Subsequently, we conduct a spherical zero-$β$ MHD simulation using the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC) and replicated the entire dynamic process of the filament eruption consistent with observations. With the calculation of time-distance profile, Qusai-Separatrix Layers (QSL), and synthetic radiation from simulated current density, we find a good agreement between our simulation and observations in terms of dynamics and magnetic topology. Technically, we provide a useful method of advanced data-constrained simulation of weak active regions in spherical coordinates. Scientifically, the model allows us to quantitatively describe and diagnose the entire process of filament eruption.

astro-ph.SR↗

arXiv2025

The Birth of a Major Coronal Mass Ejection with Intricate Magnetic Structure from Multiple Active Regions

Coronal mass ejections (CMEs) are the eruptions of magnetised plasma from the Sun and are considered the main driver of adverse space weather events. Hence, undrstanding its formation process, particularly the magnetic topology, is critical for accurate space weather prediction. Here, based on imaging observations and three-dimensional (3D) data-constrained thermodynamic magnetohydrodynamical (MHD) simulation in spherical coordinates, we exhibit the birth of a CME with intricate magnetic structure from multiple active regions (ARs) due to 3D magnetic reconnection. It is observed as a coronal jet between active regions, accompanied by the back-flowing of filament materials along the jet spine after the passage of the eruptive filament. This jet connects two dimming regions within different active regions. This is an observational proxy of 3D magnetic reconnection between the CME flux rope and the null-point magnetic field lines crossing active regions. Hereafter, the thermodynamic data-constrained MHD simulation successfully reproduces the observed jet and the reconnection process that flux ropes partake in, leading to a CME flux rope with a complex magnetic structure distinct from its progenitor. The generality of this scenario is then validated by data-inspired MHD simulations in a simple multipolar magnetic configuration. This work demonstrates the role of multiple active regions in forming CMEs with intricate magnetic structures. On the one hand, a non-coherent flux rope where not all twisted magnetic field lines wind around one common axis is naturally formed. On the other hand, our findings suggest that the topology of a real CME flux rope may not be solely determined by a single active region, particularly during periods of solar maximum.

astro-ph.SR↗

arXiv2025

SIP-IFVM: A time-evolving coronal model with an extended magnetic field decomposition strategy

Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stability. Therefore, we propose an extended magnetic field decomposition strategy and implement it in the implicit MHD model to develop a coronal model that is both efficient and numerically stable enough for simulating the long-term evolutions of the global corona. The traditional decomposition strategies split the magnetic field into a time-invariant potential field and a time-dependent component $\mathbf{B}_1$. It works well for quasi-steady-state coronal simulations where $\left|\mathbf{B}_1\right|$ is typically small. However, as the inner-boundary magnetic field evolves, $\left|\mathbf{B}_1\right|$ can grow significantly larger and its discretization errors often lead to nonphysical negative thermal pressure, ultimately causing the code to crash. In this paper, we mitigate such undesired situations by introducing a temporally piecewise-constant variable to accommodate part of the non-potential field and remain $\left|\mathbf{B}_1\right|$ consistently small throughout the simulations. We incorporate this novel magnetic field decomposition strategy into our implicit MHD coronal model and apply it to simulate the evolution of coronal structures within 0.1 AU over two solar-maximum Carrington rotations. The results show that this coronal model effectively captures observations and performs more than 80 times faster than real time using only 192 CPU cores, making it well-suited for practical applications in simulating the time-evolving corona.

astro-ph.SR↗

arXiv2024

Enhanced Peak and Extended Cooling of the Extreme-ultraviolet Late Phase in a Confined Solar Flare

We present observations and analysis of an X1.8 non-eruptive solar flare on 2012 October 23, which is characterized by an extremely large late-phase peak seen in the warm coronal extreme-ultraviolet (EUV) emissions ($\sim$ 3 MK), with the peak intensity over 1.4 times that of main flare peak. The flare is driven by a failed eruption of a magnetic flux rope (MFR), whose strong squeeze force acting on the overlying magnetic structures gives rise to an intense early heating of the late-phase loops. Based on differential emission measure (DEM) analysis, it is found that the late-phase loops experience a "longer-than-expected" cooling without the presence of any obvious additional heating, and meanwhile, their volume emission measure (EM) maintains a plateau level for a long time before turning into an evident decay. Without the need for an additional heating, we propose that the special thermodynamic evolution of the late-phase loops revealed in this flare might arise from loop cross-sectional expansions with height, which are evidenced by both direct measurements from EUV images and by magnetic field extrapolation. By blocking the losses of both heat flux and mass from the corona, such an upward cross-sectional expansion not only elongates the loop cooling time, but also more effectively sustains the loop density, therefore leading to a later-than-expected occurrence of the warm coronal late phase in combination with a sufficiently high late-phase peak. We further verify such a scenario by analytically solving the cooling process of a late-phase loop characterized by a variable cross section.

astro-ph.SR↗

arXiv2024

Recent advances in solar data-driven MHD simulations of the formation and evolution of CME flux ropes

Filament eruptions and coronal mass ejections are physical phenomena related to magnetic flux ropes carrying electric current. A magnetic flux rope is a key structure for solar eruptions, and when it carries a southward magnetic field component when propagating to the Earth. It is the primary driver of strong geomagnetic storms. As a result, developing a numerical model capable of capturing the entire progression of a flux rope, from its inception to its eruptive phase, is crucial for forecasting adverse space weather. The existence of such flux ropes is revealed by the presence of sigmoids in active regions or hot channels by observations from space and ground instruments. After proposing cartoons in 2D, potential, linear, non-linear-force-free-field (NLFFF) and non-force-free-field (NFFF) magnetic extrapolations, 3D numerical magnetohydrodynamic (MHD) simulation models were developed, first in a static configuration and later dynamic data-driven MHD models using high resolution observed vector magnetograms. This paper reviews a few recent developments in data-driven mode, such as the time-dependent magneto-frictional (TMF) and thermodynamic magnetohydrodynamic (MHD) models. Hereafter, to demonstrate the capacity of these models to reveal the physics of observations, we present the results for three events explored in our group: 1. the eruptive X1.0 flare on 28 October 2021; 2. the filament eruption on 18 August 2022; and 3. the confined X2.2 flare on 6 September 2017. These case studies validate the ability of data-driven models to retrieve observations, including the formation and eruption of flux ropes, 3D magnetic reconnection, CME three-part structures and the failed eruption. Based on these results, we provide some arguments for the formation mechanisms of flux ropes, the physical nature of the CME leading front, and the constraints of failed eruptions.

astro-ph.SR↗

arXiv2024

A Method for Determining the Locations and Configurations of Magnetic Reconnection within 3D Turbulent Plasmas

Context. Three-dimensional (3D) reconnection is an important mechanism for efficiently releasing energy during astrophysical eruptive events, which is difficult to be quantitatively analyzed especially within turbulent plasmas. Aims. In this paper, an efficient method for identifying locations and configurations of 3D reconnection from MHD data is developed. Methods. This method analyzes the local nonideal electric field and magnetic structure at an arbitrary position. As only performing algebraical manipulations on the discrete field data and avoiding computationally expensive operations like field-line tracing and root-finding, this method naturally possesses high efficiency. To validate this method, we apply it to the 3D data from a high-resolution simulation of a Harris-sheet reconnection and a data-driven simulation of a coronal flux rope eruption. Results. It is shown that this method can precisely identify the local structures of discrete magnetic field. Through the information of nonideal electric field and the geometric attributes of magnetic field, the local structures of reconnection sites can be effectively and comprehensively determined. For fine turbulent processes, both qualitative pictures and quantitative statistical properties of small-scale reconnection structures can be obtained. For large-scale solar simulations, macro-scale magnetic structures such as flux ropes and eruption current sheets can also be recognized. Conclusions. We develop a powerful method to analyze multi-scale structures of 3D reconnection. It can be applied not only in MHD simulations but also in kinetic simulations, plasma experiments, and in-situ observations.

astro-ph.SR↗

arXiv2023

Rotation and Confined Eruption of a Double Flux-Rope System

We perform a data-constrained simulation with the zero-$β$ assumption to study the mechanisms of strong rotation and failed eruption of a filament in active region 11474 on 2012 May 5 observed by Solar Dynamics Observatory and Solar Terrestrial Relations Observatory. The initial magnetic field is provided by nonlinear force-free field extrapolation, which is reconstructed by the regularized Biot-Savart laws and magnetofrictional method. Our simulation reproduces most observational features very well, e.g., the filament large-angle rotation of about $130 ^{\circ}$, the confined eruption and the flare ribbons, allowing us to analyze the underlying physical processes behind observations. We discover two flux ropes in the sigmoid system, an upper flux rope (MFR1) and a lower flux rope (MFR2), which correspond to the filament and hot channel in observations, respectively. Both flux ropes undergo confined eruptions. MFR2 grows by tether-cutting reconnection during the eruption. The rotation of MFR1 is related to the shear-field component along the axis. The toroidal field tension force and the non-axisymmetry forces confine the eruption of MFR1. We also suggest that the mutual interaction between MFR1 and MFR2 contributes to the large-angle rotation and the eruption failure. In addition, we calculate the temporal evolution of the twist and writhe of MFR1, which is a hint of probable reversal rotation.

astro-ph.SR↗