arXiv subjects

Jinhee Kim

Publications and source records attributed to Jinhee Kim.

At least 19 recordsLinked to original sources

arXiv2026

LowRankArena: A Standardized Evaluation Platform for SVD-Based LLM Compression

SVD-based low-rank compression has become a fast-growing direction for reducing the memory and computational cost of large language models (LLMs). However, meaningful comparison across existing studies remains difficult as prior evaluations use varied benchmarks, inconsistent ratios, and diverse setups, often failing to isolate low-rank effects from auxiliary techniques. As a result, it remains unclear whether reported gains reflect method-level improvements or differences in evaluation protocol. This lack of comparability highlights the need for a unified, reproducible evaluation platform. To address this problem, we present LowRankArena, a standardized evaluation platform for SVD-based LLM compression. LowRankArena unifies task versions, uniform-precision compression budgets, comparison regimes, and inference measurements, and provides a reproducible pipeline with over 3 TiB released compressed checkpoints. Using LowRankArena, our aligned audit of five representative SVD methods reveals that prior findings are highly conditional under standardized protocols: clear leaders and performance tiers shift across backbones and keep ratios, multiple-choice accuracy can hide large perplexity degradation, and nominal low-rank savings yield workload-dependent and often limited end-to-end speedups. Our code is available at: https://github.com/Zishan-Shao/lowrankarena.git.

cs.CL↗

arXiv2026

TASQ: Temporal-Adaptive Bit Sparsification Quantization for Diffusion Models

Static quantization assigns one weight precision to every denoising step. To preserve quality, that precision must accommodate the most quantization-sensitive step, even though many other steps can tolerate fewer bits. The resulting model may satisfy its memory budget, but it repeatedly pays worst-case arithmetic throughout the denoising trajectory. We introduce Temporal-Adaptive Bit Sparsification Quantization (TASQ) to separate these two costs. TASQ stores one shared maximum-precision weight buffer and learns a Temporal-Spatial LSB Mask that selects a lower effective precision for each layer and denoising stage by truncating least-significant bits. Storage therefore remains fixed by the worst case, while BitOPs decrease at less sensitive stages without per-stage weight copies or runtime search. A Temporal-Precision Engine maps the learned schedule to bit-serial execution, where cycles scale with effective precision and switching precision has no measured cycle overhead. On PixArt-Sigma, SANA-1.6B, and SDXL-Turbo, TASQ achieves quality comparable to static quantization with less computation. Together with the Temporal-Precision Engine, it reduces execution cycles by 25 to 50 percent over static quantization and by 6.1 to 7.5x over a naive static 8-bit bit-serial execution. Code is available at https://github.com/seokho-han/tasq.

cs.CV↗

arXiv2026

A Guiding Framework for K-12 Teachers in Creating AI-powered Learning Technologies through Vibe Coding

Large language models generate code from natural language prompts, enabling "vibe coding," which allows non-programmers to develop computational solutions. Vibe coding for teachers amplifies the value of teachers-as-designers, improving technology integration while fostering AI literacy. However, structured guidance on supporting this process is lacking. We propose GAIDE (A Guiding Framework for AI-Integrated Design for Educators), a framework that supports K-12 teachers in creating AI-powered learning technologies through vibe coding. The initial framework, built on Design Thinking and INTERACT, was validated through a CORDTRA interaction analysis of three teachers and four faculty mentors in an eight-week workshop to derive the final framework. Additionally, the qualitative analysis of pre- and post-interviews found an enhancement of teachers' AI literacy. Findings highlight the potential of learning-by-creating for professional development.

cs.CY↗

arXiv2026

FlashSVD v1.5: Making Low-Rank Transformers Inference Actually Fast

SVD-based Low-rank compression reduces transformer parameters and nominal FLOPs, but these savings often translate poorly into real LLM serving speedups. We show that this gap is largely a runtime problem: factorized checkpoints fragment execution paths, and the resulting overhead differs substantially between prefill and autoregressive decode. We present FlashSVD v1.5, a unified inference runtime for serving SVD-compressed transformers. FlashSVD v1.5 maps diverse public SVD compression families to a common factorized representation and combines phase-specific kernels with dense-KV decode, packed MLP execution, and per-layer CUDA-graph replay to reorganize the low-rank serving path into a thin runtime. Across representative decoder-serving settings, FlashSVD v1.5 achieves up to 2.55x decode and 2.39x end-to-end speedup, and it attains 1.48x average decode and 1.44x average end-to-end speedup across multiple popular SVD compression families. These results suggest that practical low-rank acceleration requires runtime co-design, not compression algorithms alone. Our code is available at: https://github.com/Zishan-Shao/FlashSVD.

cs.LG↗

arXiv2026

T2S-Bench & Structure-of-Thought: Benchmarking and Prompting Comprehensive Text-to-Structure Reasoning

Think about how human handles complex reading tasks: marking key points, inferring their relationships, and structuring information to guide understanding and responses. Likewise, can a large language model benefit from text structure to enhance text-processing performance? To explore it, in this work, we first introduce Structure of Thought (SoT), a prompting technique that explicitly guides models to construct intermediate text structures, consistently boosting performance across eight tasks and three model families. Building upon this insight, we present T2S-Bench, the first benchmark designed to evaluate and improve text-to-structure capabilities of models. T2S-Bench includes 1.8K samples across 6 scientific domains and 32 structural types, rigorously constructed to ensure accuracy, fairness, and quality. Evaluation on 45 mainstream models reveals substantial improvement potential: the average accuracy on the multi-hop reasoning task is only 52.1%, and even the most advanced model achieves 58.1% node accuracy in end-to-end extraction. Furthermore, on Qwen2.5-7B-Instruct, SoT alone yields an average +5.7% improvement across eight diverse text-processing tasks, and fine-tuning on T2S-Bench further increases this gain to +8.6%. These results highlight the value of explicit text structuring and the complementary contributions of SoT and T2S-Bench. Dataset and eval code have been released at https://t2s-bench.github.io/T2S-Bench-Page/.

cs.CL↗

arXiv2026

MoBiQuant: Mixture-of-Bits Quantization for Token-Adaptive Any-Precision LLM

Dynamic runtime latency and memory constraints necessitate flexible large language model (LLM) deployment, where an LLM can be inferred with various quantization precisions based on available computational resources. Recent work on such any-precision quantization either relies on hardware-inefficient vector quantization or induces additional scaling factors when switching between bit-widths. Meanwhile, existing post-training quantization (PTQ) methods calibrated for a fixed low precision show poor generalizability under runtime precision change. In this work, we attribute the source of poor generalization across bit-widths to a precision-dependent \textit{outlier migration} phenomenon where the distribution of PTQ-sensitive tokens changes across precisions. Motivated by this observation, we propose \texttt{MoBiQuant}, a novel any-precision Mixture-of-Bits quantization framework that adjusts weight precision for flexible LLM inference based on token sensitivity. Specifically, we propose a many-in-one recursive residual quantization that can iteratively reconstruct higher-precision weights at runtime and mitigates \textit{outlier migration} with a token-aware router to dynamically select the optimal inference precision of each token.Extensive experiments show that \texttt{MoBiQuant} matches or surpasses frontier single-precision PTQ while exhibiting strong elasticity, achieving significant memory savings and throughput gains of up to $1.34\times$ over state-of-the-art any-precision methods.

cs.LG↗

arXiv2025

Efficient Multi-bit Quantization Network Training via Weight Bias Correction and Bit-wise Coreset Sampling

Multi-bit quantization networks enable flexible deployment of deep neural networks by supporting multiple precision levels within a single model. However, existing approaches suffer from significant training overhead as full-dataset updates are repeated for each supported bit-width, resulting in a cost that scales linearly with the number of precisions. Additionally, extra fine-tuning stages are often required to support additional or intermediate precision options, further compounding the overall training burden. To address this issue, we propose two techniques that greatly reduce the training overhead without compromising model utility: (i) Weight bias correction enables shared batch normalization and eliminates the need for fine-tuning by neutralizing quantization-induced bias across bit-widths and aligning activation distributions; and (ii) Bit-wise coreset sampling strategy allows each child model to train on a compact, informative subset selected via gradient-based importance scores by exploiting the implicit knowledge transfer phenomenon. Experiments on CIFAR-10/100, TinyImageNet, and ImageNet-1K with both ResNet and ViT architectures demonstrate that our method achieves competitive or superior accuracy while reducing training time up to 7.88x. Our code is released at https://github.com/a2jinhee/EMQNet_jk.

cs.CV↗

arXiv2025

Row-Column Hybrid Grouping for Fault-Resilient Multi-Bit Weight Representation on IMC Arrays

This paper addresses two critical challenges in analog In-Memory Computing (IMC) systems that limit their scalability and deployability: the computational unreliability caused by stuck-at faults (SAFs) and the high compilation overhead of existing fault-mitigation algorithms, namely Fault-Free (FF). To overcome these limitations, we first propose a novel multi-bit weight representation technique, termed row-column hybrid grouping, which generalizes conventional column grouping by introducing redundancy across both rows and columns. This structural redundancy enhances fault tolerance and can be effectively combined with existing fault-mitigation solutions. Second, we design a compiler pipeline that reformulates the fault-aware weight decomposition problem as an Integer Linear Programming (ILP) task, enabling fast and scalable compilation through off-the-shelf solvers. Further acceleration is achieved through theoretical insights that identify fault patterns amenable to trivial solutions, significantly reducing computation. Experimental results on convolutional networks and small language models demonstrate the effectiveness of our approach, achieving up to 8%p improvement in accuracy, 150x faster compilation, and 2x energy efficiency gain compared to existing baselines.

cs.AR↗

arXiv2025

MSQ: Memory-Efficient Bit Sparsification Quantization

As deep neural networks (DNNs) see increased deployment on mobile and edge devices, optimizing model efficiency has become crucial. Mixed-precision quantization is widely favored, as it offers a superior balance between efficiency and accuracy compared to uniform quantization. However, finding the optimal precision for each layer is challenging. Recent studies utilizing bit-level sparsity have shown promise, yet they often introduce substantial training complexity and high GPU memory requirements. In this paper, we propose Memory-Efficient Bit Sparsification Quantization (MSQ), a novel approach that addresses these limitations. MSQ applies a round-clamp quantizer to enable differentiable computation of the least significant bits (LSBs) from model weights. It further employs regularization to induce sparsity in these LSBs, enabling effective precision reduction without explicit bit-level parameter splitting. Additionally, MSQ incorporates Hessian information, allowing the simultaneous pruning of multiple LSBs to further enhance training efficiency. Experimental results show that MSQ achieves up to 8.00x reduction in trainable parameters and up to 86% reduction in training time compared to previous bit-level quantization, while maintaining competitive accuracy and compression rates. This makes it a practical solution for training efficient DNNs on resource-constrained devices.

cs.LG↗

arXiv2025

Attend-and-Refine: Interactive keypoint estimation and quantitative cervical vertebrae analysis for bone age assessment

In pediatric orthodontics, accurate estimation of growth potential is essential for developing effective treatment strategies. Our research aims to predict this potential by identifying the growth peak and analyzing cervical vertebra morphology solely through lateral cephalometric radiographs. We accomplish this by comprehensively analyzing cervical vertebral maturation (CVM) features from these radiographs. This methodology provides clinicians with a reliable and efficient tool to determine the optimal timings for orthodontic interventions, ultimately enhancing patient outcomes. A crucial aspect of this approach is the meticulous annotation of keypoints on the cervical vertebrae, a task often challenged by its labor-intensive nature. To mitigate this, we introduce Attend-and-Refine Network (ARNet), a user-interactive, deep learning-based model designed to streamline the annotation process. ARNet features Interaction-guided recalibration network, which adaptively recalibrates image features in response to user feedback, coupled with a morphology-aware loss function that preserves the structural consistency of keypoints. This novel approach substantially reduces manual effort in keypoint identification, thereby enhancing the efficiency and accuracy of the process. Extensively validated across various datasets, ARNet demonstrates remarkable performance and exhibits wide-ranging applicability in medical imaging. In conclusion, our research offers an effective AI-assisted diagnostic tool for assessing growth potential in pediatric orthodontics, marking a significant advancement in the field.

cs.CV↗

arXiv2025

Good Noise Makes Good Edits: A Training-Free Diffusion-Based Video Editing with Image and Text Prompts

We propose VINO, the first zero-shot, training-free video editing method conditioned on both image and text. Our approach introduces $\rho$-start sampling and dilated dual masking to construct structured noise maps that enable coherent and accurate edits. To further enhance visual fidelity, we present zero image guidance, a controllable negative prompt strategy. Extensive experiments demonstrate that VINO faithfully incorporates the reference image into video edits, achieving strong performance compared to state-of-the-art baselines, all without any test-time or instance-specific training.

cs.CV↗

arXiv2025

TruncQuant: Truncation-Ready Quantization for DNNs with Flexible Weight Bit Precision

The deployment of deep neural networks on edge devices is a challenging task due to the increasing complexity of state-of-the-art models, requiring efforts to reduce model size and inference latency. Recent studies explore models operating at diverse quantization settings to find the optimal point that balances computational efficiency and accuracy. Truncation, an effective approach for achieving lower bit precision mapping, enables a single model to adapt to various hardware platforms with little to no cost. However, formulating a training scheme for deep neural networks to withstand the associated errors introduced by truncation remains a challenge, as the current quantization-aware training schemes are not designed for the truncation process. We propose TruncQuant, a novel truncation-ready training scheme allowing flexible bit precision through bit-shifting in runtime. We achieve this by aligning TruncQuant with the output of the truncation process, demonstrating strong robustness across bit-width settings, and offering an easily implementable training scheme within existing quantization-aware frameworks. Our code is released at https://github.com/a2jinhee/TruncQuant.

cs.LG↗

arXiv2025

MEMHD: Memory-Efficient Multi-Centroid Hyperdimensional Computing for Fully-Utilized In-Memory Computing Architectures

The implementation of Hyperdimensional Computing (HDC) on In-Memory Computing (IMC) architectures faces significant challenges due to the mismatch between highdimensional vectors and IMC array sizes, leading to inefficient memory utilization and increased computation cycles. This paper presents MEMHD, a Memory-Efficient Multi-centroid HDC framework designed to address these challenges. MEMHD introduces a clustering-based initialization method and quantization aware iterative learning for multi-centroid associative memory. Through these approaches and its overall architecture, MEMHD achieves a significant reduction in memory requirements while maintaining or improving classification accuracy. Our approach achieves full utilization of IMC arrays and enables one-shot (or few-shot) associative search. Experimental results demonstrate that MEMHD outperforms state-of-the-art binary HDC models, achieving up to 13.69% higher accuracy with the same memory usage, or 13.25x more memory efficiency at the same accuracy level. Moreover, MEMHD reduces computation cycles by up to 80x and array usage by up to 71x compared to baseline IMC mapping methods when mapped to 128x128 IMC arrays, while significantly improving energy and computation cycle efficiency.

cs.AR↗

arXiv2024

Bones Can't Be Triangles: Accurate and Efficient Vertebrae Keypoint Estimation through Collaborative Error Revision

Recent advances in interactive keypoint estimation methods have enhanced accuracy while minimizing user intervention. However, these methods require user input for error correction, which can be costly in vertebrae keypoint estimation where inaccurate keypoints are densely clustered or overlap. We introduce a novel approach, KeyBot, specifically designed to identify and correct significant and typical errors in existing models, akin to user revision. By characterizing typical error types and using simulated errors for training, KeyBot effectively corrects these errors and significantly reduces user workload. Comprehensive quantitative and qualitative evaluations on three public datasets confirm that KeyBot significantly outperforms existing methods, achieving state-of-the-art performance in interactive vertebrae keypoint estimation. The source code and demo video are available at: https://ts-kim.github.io/KeyBot/

cs.CV↗

arXiv2024

Students' Perceived Roles, Opportunities, and Challenges of a Generative AI-powered Teachable Agent: A Case of Middle School Math Class

Ongoing advancements in Generative AI (GenAI) have boosted the potential of applying long-standing learning-by-teaching practices in the form of a teachable agent (TA). Despite the recognized roles and opportunities of TAs, less is known about how GenAI could create synergy or introduce challenges in TAs and how students perceived the application of GenAI in TAs. This study explored middle school students perceived roles, benefits, and challenges of GenAI-powered TAs in an authentic mathematics classroom. Through classroom observation, focus-group interviews, and open-ended surveys of 108 sixth-grade students, we found that students expected the GenAI-powered TA to serve as a learning companion, facilitator, and collaborative problem-solver. Students also expressed the benefits and challenges of GenAI-powered TAs. This study provides implications for the design of educational AI and AI-assisted instruction.

cs.CY↗

arXiv2024

Elementary School Students' and Teachers' Perceptions Towards Creative Mathematical Writing with Generative AI

While mathematical creative writing can potentially engage students in expressing mathematical ideas in an imaginative way, some elementary school-age students struggle in this process. Generative AI (GenAI) offers possibilities for supporting creative writing activities, such as providing story generation. However, the design of GenAI-powered learning technologies requires careful consideration of the technology reception in the actual classrooms. This study explores students' and teachers' perceptions of creative mathematical writing with the developed GenAI-powered technology. The study adopted a qualitative thematic analysis of the interviews, triangulated with open-ended survey responses and classroom observation of 79 elementary school students, resulting in six themes and 19 subthemes. This study contributes by investigating the lived experience of GenAI-supported learning and the design considerations for GenAI-powered learning technologies and instructions.

cs.CY↗

arXiv2024

EPIC: Effective Prompting for Imbalanced-Class Data Synthesis in Tabular Data Classification via Large Language Models

Large language models (LLMs) have demonstrated remarkable in-context learning capabilities across diverse applications. In this work, we explore the effectiveness of LLMs for generating realistic synthetic tabular data, identifying key prompt design elements to optimize performance. We introduce EPIC, a novel approach that leverages balanced, grouped data samples and consistent formatting with unique variable mapping to guide LLMs in generating accurate synthetic data across all classes, even for imbalanced datasets. Evaluations on real-world datasets show that EPIC achieves state-of-the-art machine learning classification performance, significantly improving generation efficiency. These findings highlight the effectiveness of EPIC for synthetic tabular data generation, particularly in addressing class imbalance. Our source code for our work is available at: https://seharanul17.github.io/project-synthetic-tabular-llm/

cs.LG↗

arXiv2022

Exploring Train and Test-Time Augmentations for Audio-Language Learning

In this paper, we aim to unveil the impact of data augmentation in audio-language multi-modal learning, which has not been explored despite its importance. We explore various augmentation methods at not only train-time but also test-time and find out that proper data augmentation can lead to substantial improvements. Specifically, applying our proposed audio-language paired augmentation PairMix, which is the first multi-modal audio-language augmentation method, outperforms the baselines for both automated audio captioning and audio-text retrieval tasks. To fully take advantage of data augmentation, we also present multi-level test-time augmentation (Multi-TTA) for the test-time. We successfully incorporate the two proposed methods and uni-modal augmentations and achieve 47.5 SPIDEr on audio captioning, which is an 18.2% relative increase over the baseline. In audio-text retrieval, the proposed methods also show an improvement in performance as well.

cs.SD↗