arXiv subjects

Jinhong Yuan

Publications and source records attributed to Jinhong Yuan.

At least 91 records · Page 5Linked to original sources

arXiv2022

Sub-Block Rearranged Staircase Codes for Optical Transport Networks

We propose a new family of spatially coupled product codes, called sub-block rearranged staircase (SR-staircase) codes. Each SR-staircase code block is constructed by encoding rearranged preceding code blocks and new information blocks, where the rearrangement involves sub-blocks decomposition and transposition. The proposed codes can be constructed to have each code block size of $1/q$ to that of the conventional staircase codes while having the same rate and component codes, for any positive integer $q$. In this regard, we can use strong algebraic component codes to construct SR-staircase codes with a similar or the same code block size and rate as staircase codes with weak component codes. Moreover, both waterfall and error floor performance can be further improved by using a large coupling width. The superior performance of the proposed codes is demonstrated through density evolution and error floor analysis as well as simulation.

cs.IT↗

arXiv2022

Multicarrier Modulation on Delay-Doppler Plane: Achieving Orthogonality with Fine Resolutions

In this paper, we investigate the design of a novel multicarrier (MC) modulation on delay-Doppler (DD) plane, to couple the modulated signal with a doubly-selective channel having DD resolutions. A key challenge for the design of DD plane MC modulation is to find a realizable pulse orthogonal with respect to the DD plane's fine resolutions. To this end, we first indicate that a feasible DD plane MC modulation is essentially a type of staggered multitone modulation. Then, we propose an orthogonal delay-Doppler division multiplexing (ODDM) modulation, and design the corresponding transmit pulse. Most importantly, we prove that the proposed transmit pulse is orthogonal with respect to the DD plane's resolutions and therefore a realizable DD plane orthogonal pulse does exist. Finally, we demonstrate the superior performance of the proposed ODDM modulation in terms of out-of-band radiation and bit error rate.

cs.IT↗

arXiv2022

Resource Allocation and 3D Trajectory Design for Power-Efficient IRS-Assisted UAV-NOMA Communications

In this paper, an intelligent reflecting surface (IRS) is introduced to assist an unmanned aerial vehicle (UAV) communication system based on non-orthogonal multiple access (NOMA) for serving multiple ground users. We aim to minimize the average total system energy consumption by jointly designing the resource allocation strategy, the three dimensional (3D) trajectory of the UAV, as well as the phase control at the IRS. The design is formulated as a non-convex optimization problem taking into account the maximum tolerable outage probability constraint and the individual minimum data rate requirement. To circumvent the intractability of the design problem due to the altitude-dependent Rician fading in UAV-to-user links, we adopt the deep neural network (DNN) approach to accurately approximate the corresponding effective channel gains, which facilitates the development of a low-complexity suboptimal iterative algorithm via dividing the formulated problem into two subproblems and address them alternatingly. Numerical results demonstrate that the proposed algorithm can converge to an effective solution within a small number of iterations and illustrate some interesting insights: (1) IRS enables a highly flexible UAV's 3D trajectory design via recycling the dissipated radio signal for improving the achievable system data rate and reducing the flight power consumption of the UAV; (2) IRS provides a rich array gain through passive beamforming in the reflection link, which can substantially reduce the required communication power for guaranteeing the required quality-of-service (QoS); (3) Optimizing the altitude of UAV's trajectory can effectively exploit the outage-guaranteed effective channel gain to save the total required communication power enabling power-efficient UAV communications.

cs.IT↗

arXiv2022

Constrained Error Pattern Generation for GRAND

Maximum-likelihood (ML) decoding can be used to obtain the optimal performance of error correction codes. However, the size of the search space and consequently the decoding complexity grows exponentially, making it impractical to be employed for long codes. In this paper, we propose an approach to constrain the search space for error patterns under a recently introduced near ML decoding scheme called guessing random additive noise decoding (GRAND). In this approach, the syndrome-based constraints which divide the search space into disjoint sets are progressively evaluated. By employing $p$ constraints extracted from the parity check matrix, the average number of queries reduces by a factor of $2^p$ while the error correction performance remains intact.

cs.IT↗

arXiv2022

Secure Communication in Multifunctional Active Intelligent Reflection Surface-assisted Systems

In this paper, the secure performance of multiuser multiple-input single-output wireless communications systems assisted by a multifunctional active intelligent reflection surface (IRS) is investigated. The active IRS can simultaneously reflect and amplify the incident signals and emit artificial noise to combat potential wiretapping. We minimize the total system power consumption by designing the phase, amplitude, and IRS mode selection of the active IRS elements, as well as the precoder and artificial noise vector of the base station (BS). The design is formulated as a non-convex optimization problem guaranteeing communication security. To tackle the problem, this paper proposes an iterative alternating algorithm to obtain an effective sub-optimal solution. The simulation results show that the proposed scheme offers superior secure performance over all the considered baseline schemes, especially when the number of eavesdropper antennas is more than that of the BS.

eess.SP↗

arXiv2022

Physical layer security in large-scale random multiple access wireless sensor networks: a stochastic geometry approach

This paper investigates physical layer security for a large-scale WSN with random multiple access, where each fusion center in the network randomly schedules a number of sensors to upload their sensed data subject to the overhearing of randomly distributed eavesdroppers. We propose an uncoordinated random jamming scheme in which those unscheduled sensors send jamming signals with a certain probability to defeat the eavesdroppers. With the aid of stochastic geometry theory and order statistics, we derive analytical expressions for the connection outage probability and secrecy outage probability to characterize transmission reliability and secrecy, respectively. Based on the obtained analytical results, we formulate an optimization problem for maximizing the sum secrecy throughput subject to both reliability and secrecy constraints, considering a joint design of the wiretap code rates for each scheduled sensor and the jamming probability for the unscheduled sensors. We provide both optimal and low-complexity sub-optimal algorithms to tackle the above problem, and further reveal various properties on the optimal parameters which are useful to guide practical designs. In particular, we demonstrate that the proposed random jamming scheme is beneficial for improving the sum secrecy throughput, and the optimal jamming probability is the result of trade-off between secrecy and throughput. We also show that the throughput performance of the sub-optimal scheme approaches that of the optimal one when facing a stringent reliability constraint or a loose secrecy constraint.

cs.IT↗

arXiv2022

Dynamic-subarray with Fixed Phase Shifters for Energy-efficient Terahertz Hybrid Beamforming under Partial CSI

Terahertz (THz) communications are regarded as a pillar technology for the 6G systems, by offering multi-ten-GHz bandwidth. To overcome the huge propagation loss while reducing the hardware complexity, THz ultra-massive (UM) MIMO systems with hybrid beamforming are proposed to offer high array gain. Notably, the adjustable-phase-shifters considered in most existing hybrid beamforming studies are power-hungry and difficult to realize in the THz band. Moreover, due to the ultra-massive antennas, full channel-state-information (CSI) is challenging to obtain. To address these practical concerns, in this paper, an energy-efficient dynamic-subarray with fixed-phase-shifters (DS-FPS) architecture is proposed for THz hybrid beamforming. To compensate for the spectral efficiency loss caused by the fixed-phase of FPS, a switch network is inserted to enable dynamic connections. In addition, by considering the partial CSI, we propose a row-successive-decomposition (RSD) algorithm to design the hybrid beamforming matrices for DS-FPS. A row-by-row (RBR) algorithm is further proposed to reduce computational complexity. Extensive simulation results show that, the proposed DS-FPS architecture with the RSD and RBR algorithms achieves much higher energy efficiency than the existing architectures. Moreover, the DS-FPS architecture with partial CSI achieves 97% spectral efficiency of that with full CSI.

cs.IT↗

arXiv2022

Generalized Spatially-Coupled Parallel Concatenated Codes With Partial Repetition

A new class of spatially-coupled turbo-like codes (SC-TCs), dubbed generalized spatially coupled parallel concatenated codes (GSC-PCCs), is introduced. These codes are constructed by applying spatial coupling on parallel concatenated codes (PCCs) with a fraction of information bits repeated $q$ times. GSC-PCCs can be seen as a generalization of the original spatially-coupled parallel concatenated codes proposed by Moloudi et al. [2]. To characterize the asymptotic performance of GSC-PCCs, we derive the corresponding density evolution equations and compute their decoding thresholds. The threshold saturation effect is observed and proven. Most importantly, we rigorously prove that any rate-$R$ GSC-PCC ensemble with 2-state convolutional component codes achieves at least a fraction $1-\frac{R}{R+q}$ of the capacity of the binary erasure channel (BEC) for repetition factor $q\geq2$ and this multiplicative gap vanishes as $q$ tends to infinity. To the best of our knowledge, this is the first class of SC-TCs that are proven to be capacity-achieving. Further, the connection between the strength of the component codes, the decoding thresholds of GSC-PCCs, and the repetition factor are established. The superiority of the proposed codes with finite blocklength is exemplified by comparing their error performance with that of existing SC-TCs via computer simulations.

cs.IT↗

arXiv2022

Generalized Mutual Information-Maximizing Quantized Decoding of LDPC Codes with Layered Scheduling

In this paper, we propose a framework of the mutual information-maximizing (MIM) quantized decoding for low-density parity-check (LDPC) codes by using simple mappings and fixed-point additions. Our decoding method is generic in the sense that it can be applied to LDPC codes with arbitrary degree distributions, and can be implemented based on either the belief propagation (BP) algorithm or the min-sum (MS) algorithm. In particular, we propose the MIM density evolution (MIM-DE) to construct the lookup tables (LUTs) for the node updates. The computational complexity and memory requirements are discussed and compared to the LUT decoder variants. For applications with low-latency requirement, we consider the layered schedule to accelerate the convergence speed of decoding quasi-cyclic LDPC codes. In particular, we develop the layered MIM-DE to design the LUTs based on the MS algorithm, leading to the MIM layered quantized MS (MIM-LQMS) decoder. An optimization method is further introduced to reduce the memory requirement for storing the LUTs. Simulation results show that the MIM quantized decoders outperform the state-of-the-art LUT decoders in the waterfall region with both 3-bit and 4-bit precision over the additive white Gaussian noise channels. For small decoding iterations, the MIM quantized decoders also achieve a faster convergence speed compared to the benchmarks. Moreover, the 4-bit MIM-LQMS decoder can approach the error performance of the floating-point layered BP decoder within 0.3 dB in the moderate-to-high SNR regions, over both the AWGN channels and the fast fading channels.

cs.IT↗

arXiv2022

Energy-efficient Dynamic-subarray with Fixed True-time-delay Design for Terahertz Wideband Hybrid Beamforming

Hybrid beamforming for Terahertz (THz) ultra-massive multiple-input multiple-output (UM-MIMO) systems is a promising technology for 6G space-air-ground integrated networks, which can overcome huge propagation loss and offer unprecedented data rates. With ultra-wide bandwidth and ultra-large-scale antennas array in THz band, the beam squint becomes one of the critical problems which could reduce the array gain and degrade the data rate substantially. However, the traditional phase-shifters-based hybrid beamforming architectures cannot tackle this issue due to the frequency-flat property of the phase shifters. In this paper, to combat the beam squint while keeping high energy efficiency, a novel dynamic-subarray with fixed true-time-delay (DS-FTTD) architecture is proposed. Compared to the existing studies which use the complicated adjustable TTDs, the DS-FTTD architecture has lower power consumption and hardware complexity, thanks to the low-cost FTTDs. Furthermore, a low-complexity row-decomposition (RD) algorithm is proposed to design hybrid beamforming matrices for the DS-FTTD architecture. Extensive simulation results show that, by using the RD algorithm, the DS-FTTD architecture achieves near-optimal array gain and significantly higher energy efficiency than the existing architectures. Moreover, the spectral efficiency of DS-FTTD architecture with the RD algorithm is robust to the imperfect channel state information.

cs.IT↗

arXiv2022

Memory Efficient Mutual Information-Maximizing Quantized Min-Sum Decoding for Rate-Compatible LDPC Codes

In this letter, we propose a two-stage design method to construct memory efficient mutual information-maximizing quantized min-sum (MIM-QMS) decoder for rate-compatible low-density parity-check (LDPC) codes. We first develop a modified density evolution to design a unique set of lookup tables (LUTs) that can be used for rate-compatible LDPC codes. The constructed LUTs are optimized based on their discrepancy values and a merge function to reduce the memory requirement. Numerical results show that the proposed rate-compatible MIM-QMS decoder can reduce the memory requirement for decoding by up to 94.92% compared to the benchmark rate-compatible LUT-based decoder with generally faster convergence speed. In addition, the proposed decoder can approach the performance of the floating-pointing belief propagation decoder within 0.15 dB.

cs.IT↗

arXiv2021

Faster-than-Nyquist Asynchronous NOMA Outperforms Synchronous NOMA

Faster-than-Nyquist (FTN) signaling aided non-orthogonal multiple access (NOMA) is conceived and its achievable rate is quantified in the presence of random link delays of the different users. We reveal that exploiting the link delays may potentially lead to a signal-to-interference-plus-noise ratio (SINR) gain, while transmitting the data symbols at FTN rates has the potential of increasing the degree-of-freedom (DoF). We then unveil the fundamental trade-off between the SINR and DoF. In particular, at a sufficiently high symbol rate, the SINR gain vanishes while the DoF gain achieves its maximum, where the achievable rate is almost $(1+β)$ times higher than that of the conventional synchronous NOMA transmission in the high signal-to-noise ratio (SNR) regime, with $β$ being the roll-off factor of the signaling pulse. Our simulation results verify our analysis and demonstrate considerable rate improvements over the conventional power-domain NOMA scheme.

cs.IT↗

arXiv2021

Enabling Joint Communication and Radar Sensing in Mobile Networks -- A Survey

Mobile network is evolving from a communication-only network towards one with joint communication and radar/radio sensing (JCAS) capabilities, that we call perceptive mobile network (PMN). In PMNs, JCAS integrates sensing into communications, sharing a majority of system modules and the same transmitted signals. The PMN is expected to provide a ubiquitous radio sensing platform and enable a vast number of novel smart applications, whilst providing non-compromised communications. In this paper, we present a broad picture of the motivation, methodologies, challenges, and research opportunities of realizing PMN, by providing a comprehensive survey for systems and technologies developed mainly in the last ten years. Beginning by reviewing the work on coexisting communication and radar systems, we highlight their limits on addressing the interference problem, and then introduce the JCAS technology. We then set up JCAS in the mobile network context and envisage its potential applications. We continue to provide a brief review of three types of JCAS systems, with particular attention to their differences in design philosophy. We then introduce a framework of PMN, including the system platform and infrastructure, three types of sensing operations, and signals usable for sensing. Subsequently, we discuss required system modifications to enable sensing on current communication-only infrastructure. Within the context of PMN, we review stimulating research problems and potential solutions, organized under nine topics: performance bounds, waveform optimization, antenna array design, clutter suppression, sensing parameter estimation, resolution of sensing ambiguity, pattern analysis, networked sensing under cellular topology, and sensing-assisted communications. We conclude the paper by listing key open research problems for the aforementioned topics and sharing some lessons that we have learned.

eess.SP↗

arXiv2021

Beamforming Design for Intelligent Reflecting Surface-Enhanced Symbiotic Radio Systems

This paper investigates multiuser multi-input single-output downlink symbiotic radio communication systems assisted by an intelligent reflecting surface (IRS). Different from existing methods ideally assuming the secondary user (SU) can jointly decode information symbols from both the access point (AP) and the IRS via multiuser detection, we consider a more practical SU that only non-coherent detection is available. To characterize the non-coherent decoding performance, a practical upper bound of the average symbol error rate (SER) is derived. Subsequently, we jointly optimize the beamformer at the AP and the phase shifts at the IRS to maximize the average sum-rate of the primary system taking into account the maximum tolerable SER constraint for the SU. To circumvent the couplings of variables, we exploit the Schur complement that facilitates the design of a suboptimal beamforming algorithm based on successive convex approximation. Our simulation results show that compared with various benchmark algorithms, the proposed scheme significantly improves the average sum-rate of the primary system, while guaranteeing the decoding performance of the secondary system.

cs.IT↗

arXiv2021

A Novel ISAC Transmission Framework based on Spatially-Spread Orthogonal Time Frequency Space Modulation

In this paper, we propose a novel integrated sensing and communication (ISAC) transmission framework based on the spatially-spread orthogonal time frequency space (SS-OTFS) modulation by considering the fact that communication channel strengths cannot be directly obtained from radar sensing. We first propose the concept of SS-OTFS modulation, where the key novelty is the angular domain discretization enabled by the spatial-spreading/de-spreading. This discretization gives rise to simple and insightful effective models for both radar sensing and communication, which result in simplified designs for the related estimation and detection problems. In particular, we design simple beam tracking, angle estimation, and power allocation schemes for radar sensing, by utilizing the special structure of the effective radar sensing matrix. Meanwhile, we provide a detailed analysis on the pair-wise error probability (PEP) for communication, which unveils the key conditions for both precoding and power allocation designs. Based on those conditions, we design a symbol-wise precoding scheme for communication based only on the delay, Doppler, and angle estimates from radar sensing, without the a priori knowledge of the communication channel fading coefficients, and also introduce the power allocation for communication. Furthermore, we notice that radar sensing and communication requires different power allocations. Therefore, we discuss the performances of both the radar sensing and communication with different power allocations and show that the power allocation should be designed leaning towards radar sensing in practical scenarios. The effectiveness of the proposed ISAC transmission framework is verified by our numerical results, which also agree with our analysis and discussions.

cs.IT↗

arXiv2021

Intelligent Reflecting Surface for Wireless Communication Security and Privacy

Intelligent reflection surface (IRS) is emerging as a promising technique for future wireless communications. Considering its excellent capability in customizing the channel conditions via energy-focusing and energy-nulling, it is an ideal technique for enhancing wireless communication security and privacy, through the theories of physical layer security and covert communications, respectively. In this article, we first present some results on applying IRS to improve the average secrecy rate in wiretap channels, to enable perfect communication covertness, and to deliberately create extra randomness in wireless propagations for hiding active wireless transmissions. Then, we identify multiple challenges for future research to fully unlock the benefits offered by IRS in the context of physical layer security and covert communications. With the aid of extensive numerical studies, we demonstrate the necessity of designing the amplitudes of the IRS elements in wireless communications with the consideration of security and privacy, where the optimal values are not always $1$ as commonly adopted in the literature. Furthermore, we reveal the tradeoff between the achievable secrecy performance and the estimation accuracy of the IRS's channel state information (CSI) at both the legitimate and malicious users, which presents the fundamental resource allocation challenge in the context of IRS-aided physical layer security. Finally, a passive channel estimation methodology exploiting deep neural networks and scene images is discussed as a potential solution to enabling CSI availability without utilizing resource-hungry pilots. This methodology serves as a visible pathway to significantly improving the covert communication rate in IRS-aided wireless networks.

cs.IT↗

arXiv2021

Windowed Decoding for Delayed Bit-Interleaved Coded Modulation

Delayed bit-interleaved coded modulation (DBICM) generalizes bit-interleaved coded modulation (BICM) by modulating differently delayed sub-blocks of codewords onto the same signals. DBICM improves transmission reliability over BICM due to its capability of detecting undelayed sub-blocks with the extrinsic information of the decoded delayed sub-blocks. In this work, we propose a novel windowed decoding algorithm for DBICM, which uses the extrinsic information of both the decoded delayed and undelayed sub-blocks, to improve the detection on all sub-blocks. Numerical results show that the proposed windowed decoding significantly outperforms the original decoding.

cs.IT↗

arXiv2021

Robust and Secure Sum-Rate Maximization for Multiuser MISO Downlink Systems with Self-sustainable IRS

This paper investigates robust and secure multiuser multiple-input single-output (MISO) downlink communications assisted by a self-sustainable intelligent reflection surface (IRS), which can simultaneously reflect and harvest energy from the received signals. We study the joint design of beamformers at an access point (AP) and the phase shifts as well as the energy harvesting schedule at the IRS for maximizing the system sum-rate. The design is formulated as a non-convex optimization problem taking into account the wireless energy harvesting capability of IRS elements, secure communications, and the robustness against the impact of channel state information (CSI) imperfection. Subsequently, we propose a computationally-efficient iterative algorithm to obtain a suboptimal solution to the design problem. In each iteration, S-procedure and the successive convex approximation are adopted to handle the intermediate optimization problem. Our simulation results unveil that: 1) there is a non-trivial trade-off between the system sum-rate and the self-sustainability of the IRS; 2) the performance gain achieved by the proposed scheme is saturated with a large number of energy harvesting IRS elements; 3) an IRS equipped with small bit-resolution discrete phase shifters is sufficient to achieve a considerable system sum-rate of the ideal case with continuous phase shifts.

cs.IT↗