arXiv subjects

Jinkyu Yang

Publications and source records attributed to Jinkyu Yang.

At least 55 records · Page 3Linked to original sources

arXiv2019

Valley Anisotropy in Elastic Metamaterials

Valley, as a new degree of freedom, raises the valleytronics in fundamental and applied science. The elastic analogs of valley states have been proposed by mimicking the symmetrical structure of either two-dimensional materials or photonic valley crystals. However, the asymmetrical valley construction remains unfulfilled. Here, we present the valley anisotropy by introducing asymmetrical design into elastic metamaterials. The elastic valley metamaterials are composed of bio-inspired hard spirals and soft materials. The anisotropic topological nature of valley is verified by asymmetrical distribution of the Berry curvature. We show the high tunability of the Berry curvature both in magnitude and sign enabled by our anisotropic valley metamaterials. Finally, we demonstrate the creation of valley topological insulators and show topologically protected propagation of transverse elastic waves relying on operating frequency. The proposed topological properties of elastic valley metamaterials pave the way to better understanding the valley topology and to creating a new type of topological insulators enabled by an additional valley degree of freedom.

physics.app-ph↗

arXiv2019

Effect of the Thickness on the Fracturing Behavior of Discontinuous Fiber Composite Structures

In this study, we investigate experimentally and numerically the mode I intra-laminar fracture and size effect of Discontinuous Fiber Composites (DFCs) as a function of the structure thicknesses. By testing geometrically-scaled Single Edge Notch Tension (SENT) specimens a notable structure size effect on the nominal strength of DFCs is identified. As the specimen size increases, the nominal strength decreases. For small specimens, we find a limited size effect with enhanced pseudo-ductility and a strong divergence from Linear Elastic Fracture Mechanics (LEFM). For sufficiently large specimen sizes, the scaling of the nominal strength follows closely LEFM with a strong brittle failure. As the thickness increases, the size effect decreases. We identify the fracture energy and the effective size of the fracture process zone as a function of the thickness of the structure. To do so, we integrate equivalent fracture mechanics and stochastic finite element modeling. Experimentally, we collect the nominal strength of geometrically-scaled Single Edge Notch Tension (SENT) specimens. The numerical stochastic model captures the complex, inhomogeneous mesostructure of DFCs by explicitly generating the platelets. From the integrated analysis, it is found that the fracture energy depends significantly on the structure thickness. It is shown to increase gradually up to 2 mm and saturates after 3 mm to a value of 57.77 N/mm, which is 4.81 times larger than a typical aluminum alloy.

physics.app-ph↗

arXiv2018

Fracturing Behavior and Size Effect of Discontinuous Fiber Composite Structures with Different Platelet Sizes

This study investigates the mode I intra-laminar fracture and size effect in Discontinuous Fiber Composites (DFCs). Towards this goal, the results of fracture tests on geometrically-scaled Single Edge Notch Tension (SENT) specimens are presented and critically discussed for three platelet sizes. The results clearly show a decrease in nominal strength as the specimen size increases. This effect becomes more important as the structure size increases. It is found that, when the specimen is sufficiently large, the structural strength scales according to Linear Elastic Fracture Mechanics (LEFM) and the failure occurs in a very brittle way. In contrast, small specimens exhibit a more pronounced pseudo-ductility with a limited scaling effect and a significant deviation from LEFM. To characterize the fracture energy and the effective length of the fracture process zone, an approach combining equivalent fracture mechanics and stochastic finite element modeling is proposed. The model accounts for the complex random mesostructure of the material by modeling the platelets explicitly. Thanks to this theoretical framework, the mode I fracture energy of DFCs is estimated for the first time and it is shown to depend significantly on the platelet size. In particular, the fracture energy is shown to increase linearly with the platelet size in the range investigated in this work.

physics.app-ph↗

arXiv2018

Bloch oscillation of elastic waves in the graded lattice of 3D-printed hollow elliptical cylinders

We study the Bloch oscillation of elastic waves in a chain composed of hollow elliptical cylinders (HECs). These HECs are 3D-printed in different wall thicknesses and are arranged to form a graded chain. We find that the frequency band structure of this lattice can be manipulated in a way to create a narrow strip of transmission range sandwiched between slanted stop bands. This enables the trapping of elastic waves at a specific location of the chain, which depends on the input frequency of the propagating elastic waves. This elastic Bloch oscillation in a tailorable 3D-printed system enables the control of energy localization in solids, potentially leading to engineering applications for vibration filtering, energy harvesting, and structural health monitoring.

physics.app-ph↗

arXiv2018

Nonlinear Wave Propagation in 3D-Printed Graded Lattices of Hollow Elliptical Cylinders

We propose a 3D-printed graded lattice made of hollow elliptical cylinders (HECs) as a new way to design impact mitigation systems. We observe asymmetric dynamics in the graded HEC chains with increasing and decreasing stiffness. Specifically, the increasing stiffness chain shows an acceleration of the propagating waves, while the decreasing stiffness chain shows the opposite. From the standpoint of impact mitigation, the decreasing stiffness chain combined with the strain-softening behavior of HECs results in an order-of-magnitude improvement in force attenuation compared to the increasing stiffness chain. We extend this finding to the graded 2D arrays and demonstrate a similar trend of wave transmission efficiency contrast between the increasing and decreasing stiffness lattices. The 3D-printed HEC lattices shown in this study can lead to the development of a new type of impact mitigating and shock absorbing structures.

physics.app-ph↗

arXiv2018

Experimental demonstration of topological waveguiding in elastic plates with local resonators

It is recent that the emergence of topological insulators in condensed matter physics has inspired analogous wave phenomena in mechanical systems, mostly in the setting of discrete lattice models. Here we report a numerical and experimental demonstration of topological waveguiding in a continuum plate. We take a ubiquitous design of a bolted elastic plate and show that such a design allows us to invoke the pseudo-spin Hall effect at remarkably low frequencies. We harness the complex interaction of the bolts and the plate to show the existence of a pair of double Dirac cones near the resonant frequency of the bolt. The manipulation of bolted patterns results in the opening of multiple topological bandgaps, including a complete bandgap that forbids all plate modes. We demonstrate that inside this bandgap, the interface between two topologically distinct zones can guide flexural waves crisply around sharp bends.

cond-mat.mes-hall↗

arXiv2018

Origami-based impact mitigation via rarefaction solitary wave creation

The principles underlying the art of origami paper folding can be applied to design sophisticated metamaterials with unique mechanical properties. By exploiting the flat crease patterns that determine the dynamic folding and unfolding motion of origami, we are able to design an origami-based metamaterial that can form rarefaction solitary waves. Our analytical, numerical and experimental results demonstrate that this rarefaction solitary wave overtakes initial compressive strain waves, thereby causing the latter part of the structure to feel tension first instead of compression. This counter-intuitive dynamic mechanism can be used to create a highly efficient--yet reusable--impact mitigating system without relying on material damping, plasticity or fracture.

nlin.PS↗

arXiv2018

Elastic Wannier-Stark Ladders and Bloch Oscillations in 1D Granular Crystals

We report the numerical and experimental study of elastic Wannier-Stark Ladders and Bloch Oscillations in a tunable one-dimensional granular chain consisting of cylindrical particles. The Wannier-Stark Ladders are obtained by tuning the contact angles to introduce a gradient in the contact stiffness along the granular chain. These ladders manifest as resonant modes localized in the space. When excited at the corresponding resonant frequencies, we demonstrate the existence of time-resolved Bloch Oscillations. The direct velocity measurements using Laser Doppler Vibrometry agree well with the numerical simulation results. We also show the possibility of further tailoring these Bloch Oscillations by numerical simulations. Such tunable systems could be useful for applications involving the spatial localization of elastic energy.

cond-mat.mes-hall↗

arXiv2018

Subwavelength and directional control of flexural waves in zone-folding induced topological plates

Inspired by the quantum spin Hall effect shown by topological insulators, we propose a plate structure that can be used to demonstrate the pseudo-spin Hall effect for flexural waves. The system consists of a thin plate with periodically arranged resonators mounted on its top surface. We extend a technique based on the plane wave expansion method to identify a double Dirac cone emerging due to the zone-folding in frequency band structures. This particular design allows us to move the double Dirac cone to a lower frequency than the resonating frequency of local resonators. We then manipulate the pattern of local resonators to open subwavelength Bragg band gaps that are topologically distinct. Building on this method, we verify numerically that a waveguide at an interface between two topologically distinct resonating plate structures can be used for guiding low-frequency, spin-dependent one-way flexural waves along a desired path with bends.

cond-mat.mes-hall↗

arXiv2017

Dial-in Topological Metamaterials Based on Bistable Stewart Platform

Recently, there have been significant efforts to guide mechanical energy in structures by relying on a novel topological framework popularized by the discovery of topological insulators. Here, we propose a topological metamaterial system based on the design of the Stewart Platform, which can not only guide mechanical waves robustly in a desired path, but also can be tuned in situ to change this wave path at will. Without resorting to any active materials, the current system harnesses bistablilty in its unit cells, such that tuning can be performed simply by a dial-in action. Consequently, a topological transition mechanism inspired by the quantum valley Hall effect can be achieved. We show the possibility of tuning in a variety of topological and traditional waveguides in the same system, and numerically investigate key qualitative and quantitative differences between them. We observe that even though both types of waveguides can lead to significant wave transmission for a certain frequency range, topological waveguides are distinctive as they support robust, back scattering immune, one-way wave propagation.

cond-mat.mes-hall↗

arXiv2017

Extreme control of impulse transmission by cylinder-based nonlinear phononic crystals

We present a novel device that can offer two extremes of elastic wave propagation --- nearly complete transmission and strong attenuation under impulse excitation. The mechanism of this highly tunable device relies on intermixing effects of dispersion and nonlinearity. The device consists of identical cylinders arranged in a chain, which interact with each other as per nonlinear Hertz's contact law. For a `dimer' configuration, i.e., two different contact angles alternating in the chain, we analytically, numerically, and experimentally show that impulse excitation can either propagate as a localized wave, or it can travel as a highly dispersive wave. Remarkably, these extremes can be achieved in this periodic arrangement simply by \textit{in-situ} control of contact angles between cylinders. We close the discussion by highlighting the key characteristics of the mechanisms that facilitate strong attenuation of incident impulse. These include low frequency to high frequency (LF-HF) scattering, and turbulence-like cascading in a periodic system. We thus envision that these adaptive, cylinder-based nonlinear phononic crystals, in conjunction with conventional impact mitigation mechanisms, could be used to design highly tunable and efficient impact manipulation devices.

nlin.PS↗

arXiv2017

Direct measurement of superdiffusive and subdiffusive energy transport in disordered granular chains

The study of energy transport properties in heterogeneous materials has attracted scientific interest for more than a century, and it continues to offer fundamental and rich questions. One of the unanswered challenges is to extend Anderson theory for uncorrelated and fully disordered lattices in condensed-matter systems to physical settings in which additional effects compete with disorder. Specifically, the effect of strong nonlinearity has been largely unexplored experimentally, partly due to the paucity of testbeds that can combine the effect of disorder and nonlinearity in a controllable manner. Here we present the first systematic experimental study of energy transport and localization properties in simultaneously disordered and nonlinear granular crystals. We demonstrate experimentally that disorder and nonlinearity --- which are known from decades of studies to individually favor energy localization --- can in some sense "cancel each other out", resulting in the destruction of wave localization. We also report that the combined effect of disorder and nonlinearity can enable the manipulation of energy transport speed in granular crystals from subdiffusive to superdiffusive ranges.

cond-mat.mtrl-sci↗

arXiv2017

Demonstrating an in-situ topological band transition in cylindrical granular chains

We numerically investigate and experimentally demonstrate an in-situ topological band transition in a highly tunable mechanical system made of cylindrical granular particles. This system allows us to tune its inter-particle stiffness in a controllable way, simply by changing the contact angles between the cylinders. The spatial variation of particles' stiffness results in an in-situ transition of the system's topology. This manifests as the emergence of a boundary mode in the finite system, which we observe experimentally via laser Doppler vibrometry. When two topologically different systems are placed adjacently, we analytically predict and computationally and experimentally demonstrate the existence of a finite-frequency topologically protected mode at their interface.

nlin.PS↗

arXiv2016

Origami-based tunable truss structures for non-volatile mechanical memory operation

Origami has recently received significant interest from the scientific community as a building block for constructing metamaterials. However, the primary focus has been placed on their kinematic applications, such as deployable space structures and sandwich core materials, by leveraging the compactness and auxeticity of planar origami platforms. Here, we present volumetric origami cells -- specifically triangulated cylindrical origami (TCO) -- with tunable stability and stiffness, and demonstrate their feasibility as non-volatile mechanical memory storage devices. We show that a pair of origami cells can develop a double-well potential to store bit information without the need of residual forces. What makes this origami-based approach more appealing is the realization of two-bit mechanical memory, in which two pairs of TCO cells are interconnected and one pair acts as a control for the other pair. Using TCO-based truss structures, we present an experimental demonstration of purely mechanical one- and two-bit memory storage mechanisms.

cond-mat.mes-hall↗

arXiv2016

Shock and Rarefaction Waves in Generalized Hertzian Contact Models

In the present work motivated by generalized forms of the Hertzian dynamics associated with granular crystals, we consider the possibility of such models to give rise to both shock and rarefaction waves. Depending on the value $p$ of the nonlinearity exponent, we find that both of these possibilities are realizable. We use a quasi-continuum approximation of a generalized inviscid Burgers model in order to predict the solution profile up to times near the shock formation, as well as to estimate when it will occur. Beyond that time threshold, oscillations associated with the discrete nature of the underlying model emerge that cannot be captured by the quasi-continuum approximation. Our analytical characterization of the above features is complemented by systematic numerical computations.

cond-mat.mtrl-sci↗

arXiv2016

Scattering of Waves by Impurities in Precompressed Granular Chains

We study scattering of waves by impurities in strongly precompressed granular chains. We explore the linear scattering of plane waves and identify a closed-form expression for the reflection and transmission coefficients for the scattering of the waves from both a single impurity and a double impurity. For single-impurity chains, we show that, within the transmission band of the host granular chain, high-frequency waves are strongly attenuated (such that the transmission coefficient vanishes as the wavenumber $k\rightarrow \pmπ$), whereas low-frequency waves are well-transmitted through the impurity. For double-impurity chains, we identify a resonance --- enabling full transmission at a particular frequency --- in a manner that is analogous to the Ramsauer--Townsend (RT) resonance from quantum physics. We also demonstrate that one can tune the frequency of the RT resonance to any value in the pass band of the host chain. We corroborate our theoretical predictions both numerically and experimentally, and we directly observe complete transmission for frequencies close to the RT resonance frequency. Finally, we show how this RT resonance can lead to the existence of reflectionless modes even in granular chains (including disordered ones) with multiple double impurities.

nlin.PS↗

arXiv2016

Wave mixing in coupled phononic crystals via a variable stiffness mechanism

We investigate wave mixing effects in a phononic crystal that couples the wave dynamics of two channels -- primary and control ones -- via a variable stiffness mechanism. We demonstrate analytically and numerically that the wave transmission in the primary channel can be manipulated by the control channel's signal. We show that the application of control waves allows the selection of a specific mode through the primary channel. We also demonstrate that the mixing of two wave modes is possible whereby a modulation effect is observed. A detailed study of the design parameters is also carried out to optimize the switching capabilities of the proposed system. Finally, we verify that the system can fulfill both switching and amplification functionalities, potentially enabling the realization of an acoustic transistor.

nlin.PS↗

arXiv2015

Formation of rarefaction waves in origami-based metamaterials

We investigate the nonlinear wave dynamics of origami-based metamaterials composed of Tachi-Miura polyhedron (TMP) unit cells. These cells exhibit strain softening behavior under compression, which can be tuned by modifying their geometrical configurations or initial folded conditions. We assemble these TMP cells into a cluster of origami-based metamaterials, and we theoretically model and numerically analyze their wave transmission mechanism under external impact. Numerical simulations show that origami-based metamaterials can provide a prototypical platform for the formation of nonlinear coherent structures in the form of rarefaction waves, which feature a tensile wavefront upon the application of compression to the system. We also demonstrate the existence of numerically exact traveling rarefaction waves. Origami-based metamaterials can be highly useful for mitigating shock waves, potentially enabling a wide variety of engineering applications.

cond-mat.mtrl-sci↗