arXiv subjects

Jinli Suo

Publications and source records attributed to Jinli Suo.

51 records · Page 3Linked to original sources

arXiv2018

Snapshot hyperspectral imaging via spectral basis multiplexing in Fourier domain

Hyperspectral imaging is an important tool having been applied in various fields, but still limited in observation of dynamic scenes. In this paper, we propose a snapshot hyperspectral imaging technique which exploits both spectral and spatial sparsity of natural scenes. Under the computational imaging scheme, we conduct spectral dimension reduction and spatial frequency truncation to the hyperspectral data cube and snapshot it in a low cost manner. Specifically, we modulate the spectral variations by several broadband spectral filters, and then map these modulated images into different regions in the Fourier domain. The encoded image compressed in both spectral and spatial are finally collected by a monochrome detector. Correspondingly, the reconstruction is essentially a Fourier domain extraction and spectral dimensional back projection with low computational load. This Fourier-spectral multiplexing in a 2D sensor simplifies both the encoding and decoding process, and makes hyperspectral data captured in a low cost manner. We demonstrate the high performance of our method by quantitative evaluation on simulation data and build a prototype system experimentally for further validation.

physics.ins-det↗

arXiv2018

Rank Minimization for Snapshot Compressive Imaging

Snapshot compressive imaging (SCI) refers to compressive imaging systems where multiple frames are mapped into a single measurement, with video compressive imaging and hyperspectral compressive imaging as two representative applications. Though exciting results of high-speed videos and hyperspectral images have been demonstrated, the poor reconstruction quality precludes SCI from wide applications.This paper aims to boost the reconstruction quality of SCI via exploiting the high-dimensional structure in the desired signal. We build a joint model to integrate the nonlocal self-similarity of video/hyperspectral frames and the rank minimization approach with the SCI sensing process. Following this, an alternating minimization algorithm is developed to solve this non-convex problem. We further investigate the special structure of the sampling process in SCI to tackle the computational workload and memory issues in SCI reconstruction. Both simulation and real data (captured by four different SCI cameras) results demonstrate that our proposed algorithm leads to significant improvements compared with current state-of-the-art algorithms. We hope our results will encourage the researchers and engineers to pursue further in compressive imaging for real applications.

cs.CV↗

arXiv2018

Single-shot thermal ghost imaging using wavelength-division multiplexing

Ghost imaging (GI) is a potential imaging technique that reconstructs the target scene from its correlated measurements with a sequential of patterns. Restricted by the multi-shot principle, GI usually requires long acquisition time and is limited in observation of dynamic scenes. To handle this problem, this paper proposes a single-shot thermal ghost imaging scheme via wavelength-division multiplexing technique. Specifically, we generate thousands of patterns simultaneously by modulating a broadband light source with a wavelength dependent diffuser. These patterns carry the scene's spatial information and then the correlated measurements are coupled into a spectrometer for the final reconstruction. This technique accelerates the ghost imaging speed significantly and promotes the applications in dynamic ghost imaging.

physics.optics↗

arXiv2018

Multispectral Focal Stack Acquisition Using A Chromatic Aberration Enlarged Camera

Capturing more information, e.g. geometry and material, using optical cameras can greatly help the perception and understanding of complex scenes. This paper proposes a novel method to capture the spectral and light field information simultaneously. By using a delicately designed chromatic aberration enlarged camera, the spectral-varying slices at different depths of the scene can be easily captured. Afterwards, the multispectral focal stack, which is composed of a stack of multispectral slice images focusing on different depths, can be recovered from the spectral-varying slices by using a Local Linear Transformation (LLT) based algorithm. The experiments verify the effectiveness of the proposed method.

eess.IV↗

arXiv2017

Experimental comparison of single-pixel imaging algorithms

Single-pixel imaging (SPI) is a novel technique capturing 2D images using a photodiode, instead of conventional 2D array sensors. SPI owns high signal-to-noise ratio, wide spectrum range, low cost, and robustness to light scattering. Various algorithms have been proposed for SPI reconstruction, including the linear correlation methods, the alternating projection method (AP), and the compressive sensing based methods. However, there has been no comprehensive review discussing respective advantages, which is important for SPI's further applications and development. In this paper, we reviewed and compared these algorithms in a unified reconstruction framework. Besides, we proposed two other SPI algorithms including a conjugate gradient descent based method (CGD) and a Poisson maximum likelihood based method. Both simulations and experiments validate the following conclusions: to obtain comparable reconstruction accuracy, the compressive sensing based total variation regularization method (TV) requires the least measurements and consumes the least running time for small-scale reconstruction; the CGD and AP methods run fastest in large-scale cases; the TV and AP methods are the most robust to measurement noise. In a word, there are trade-offs between capture efficiency, computational complexity and robustness to noise among different SPI algorithms. We have released our source code for non-commercial use.

cs.CV↗

arXiv2016

Efficient single pixel imaging in Fourier space

Single pixel imaging (SPI) is a novel technique being able to capture 2D images using a bucket detector with high signal-to-noise ratio, wide spectrum range and low cost. Conventional SPI projects random illumination patterns to randomly and uniformly sample the entire scene's information. Determined by the Nyquist sampling theory, SPI needs either numerous projections or high computation cost to reconstruct the target scene, especially for high-resolution cases. To address this issue, we propose an efficient single pixel imaging technique (eSPI), which instead projects sinusoidal patterns for importance sampling of the target scene's spatial spectrum in Fourier space. Specifically, utilizing the centrosymmetric conjugation and sparsity priors of natural images' spatial spectra, eSPI sequentially projects two $\fracπ{2}$-phase-shifted sinusoidal patterns to obtain each Fourier coefficient in the most informative spatial frequency bands. eSPI can reduce requisite patterns by two orders of magnitude compared to conventional SPI, which helps a lot for fast and high-resolution SPI.

physics.optics↗

arXiv2016

Motion-corrected Fourier ptychography

Fourier ptychography (FP) is a recently proposed computational imaging technique for high space-bandwidth product imaging. In real setups such as endoscope and transmission electron microscope, the common sample motion largely degrades the FP reconstruction and limits its practicability. In this paper, we propose a novel FP reconstruction method to efficiently correct for unknown sample motion. Specifically, we adaptively update the sample's Fourier spectrum from low spatial-frequency regions towards high spatial-frequency ones, with an additional motion recovery and phase-offset compensation procedure for each sub-spectrum. Benefiting from the phase retrieval redundancy theory, the required large overlap between adjacent sub-spectra offers an accurate guide for successful motion recovery. Experimental results on both simulated data and real captured data show that the proposed method can correct for unknown sample motion with its standard deviation being up to 10% of the field-of-view scale. We have released our source code for non-commercial use, and it may find wide applications in related FP platforms such as endoscopy and transmission electron microscopy.

physics.optics↗

arXiv2016

Fourier ptychographic reconstruction using Poisson maximum likelihood and truncated Wirtinger gradient

Fourier ptychographic microscopy (FPM) is a novel computational coherent imaging technique for high space-bandwidth product imaging. Mathematically, Fourier ptychographic (FP) reconstruction can be implemented as a phase retrieval optimization process, in which we only obtain low resolution intensity images corresponding to the sub-bands of the sample's high resolution (HR) spatial spectrum, and aim to retrieve the complex HR spectrum. In real setups, the measurements always suffer from various degenerations such as Gaussian noise, Poisson noise, speckle noise and pupil location error, which would largely degrade the reconstruction. To efficiently address these degenerations, we propose a novel FP reconstruction method under a gradient descent optimization framework in this paper. The technique utilizes Poisson maximum likelihood for better signal modeling, and truncated Wirtinger gradient for error removal. Results on both simulated data and real data captured using our laser FPM setup show that the proposed method outperforms other state-of-the-art algorithms. Also, we have released our source code for non-commercial use.

cs.CV↗

arXiv2015

Scene-adaptive Coded Apertures Imaging

Coded aperture imaging systems have recently shown great success in recovering scene depth and extending the depth-of-field. The ideal pattern, however, would have to serve two conflicting purposes: 1) be broadband to ensure robust deconvolution and 2) has sufficient zero-crossings for a high depth discrepancy. This paper presents a simple but effective scene-adaptive coded aperture solution to bridge this gap. We observe that the geometric structures in a natural scene often exhibit only a few edge directions, and the successive frames are closely correlated. Therefore we adopt a spatial partitioning and temporal propagation scheme. In each frame, we address one principal direction by applying depth-discriminative codes along it and broadband codes along its orthogonal direction. Since within a frame only the regions with edge direction corresponding to its aperture code behaves well, we utilize the close among-frame correlation to propagate the high quality single frame results temporally to obtain high performance over the whole image lattice. To physically implement this scheme, we use a Liquid Crystal on Silicon (LCoS) microdisplay that permits fast changing pattern codes. Firstly, we capture the scene with a pinhole and analyze the scene content to determine primary edge orientations. Secondly, we sequentially apply the proposed coding scheme with these orientations in the following frames. Experiments on both synthetic and real scenes show that our technique is able to combine advantages of the state-of-the-art patterns for recovering better quality depth map and all-focus images.

cs.CV↗

arXiv2015

Fast and High Quality Highlight Removal from A Single Image

Specular reflection exists widely in photography and causes the recorded color deviating from its true value, so fast and high quality highlight removal from a single nature image is of great importance. In spite of the progress in the past decades in highlight removal, achieving wide applicability to the large diversity of nature scenes is quite challenging. To handle this problem, we propose an analytic solution to highlight removal based on an L2 chromaticity definition and corresponding dichromatic model. Specifically, this paper derives a normalized dichromatic model for the pixels with identical diffuse color: a unit circle equation of projection coefficients in two subspaces that are orthogonal to and parallel with the illumination, respectively. In the former illumination orthogonal subspace, which is specular-free, we can conduct robust clustering with an explicit criterion to determine the cluster number adaptively. In the latter illumination parallel subspace, a property called pure diffuse pixels distribution rule (PDDR) helps map each specular-influenced pixel to its diffuse component. In terms of efficiency, the proposed approach involves few complex calculation, and thus can remove highlight from high resolution images fast. Experiments show that this method is of superior performance in various challenging cases.

cs.CV↗

arXiv2015

Multispectral imaging using a single bucket detector

Current multispectral imagers suffer from low photon efficiency and limited spectrum range. These limitations are partially due to the technological limitations from array sensors (CCD or CMOS), and also caused by separative measurement of the entries/slices of a spatial-spectral data cube. Besides, they are mostly expensive and bulky. To address above issues, this paper proposes to image the 3D multispectral data with a single bucket detector in a multiplexing way. Under the single pixel imaging scheme, we project spatial-spectral modulated illumination onto the target scene to encode the scene's 3D information into a 1D measurement sequence. Conventional spatial modulation is used to resolve the scene's spatial information. To avoid increasing requisite acquisition time for 2D to 3D extension of the latent data, we conduct spectral modulation in a frequency-division multiplexing manner in the speed gap between slow spatial light modulation and fast detector response. Then the sequential reconstruction falls into a simple Fourier decomposition and standard compressive sensing problem. A proof-of-concept setup is built to capture the multispectral data (64 pixels $\times$ 64 pixels $\times$ 10 wavelength bands) in the visible wavelength range (450nm-650nm) with acquisition time being 1 minute. The imaging scheme is of high flexibility for different spectrum ranges and resolutions. It holds great potentials for various low light and airborne applications, and can be easily manufactured production-volume portable multispectral imagers.

physics.optics↗

arXiv2014

Multi-frame denoising of high speed optical coherence tomography data using inter-frame and intra-frame priors

Optical coherence tomography (OCT) is an important interferometric diagnostic technique which provides cross-sectional views of the subsurface microstructure of biological tissues. However, the imaging quality of high-speed OCT is limited due to the large speckle noise. To address this problem, this paper proposes a multi-frame algorithmic method to denoise OCT volume. Mathematically, we build an optimization model which forces the temporally registered frames to be low rank, and the gradient in each frame to be sparse, under logarithmic image formation and noise variance constraints. Besides, a convex optimization algorithm based on the augmented Lagrangian method is derived to solve the above model. The results reveal that our approach outperforms the other methods in terms of both speckle noise suppression and crucial detail preservation.

cs.CV↗

arXiv2014

Fourier ptychographic reconstruction using Wirtinger flow optimization

Recently Fourier Ptychography (FP) has attracted great attention, due to its marked effectiveness in leveraging snapshot numbers for spatial resolution in large field-of-view imaging. To acquire high signal-to-noise-ratio (SNR) images under angularly varying illuminations for subsequent reconstruction, FP requires long exposure time, which largely limits its practical applications. In this paper, based on the recently reported Wirtinger flow algorithm, we propose an iterative optimization framework incorporating phase retrieval and noise relaxation together, to realize FP reconstruction using low SNR images captured under short exposure time. Experiments on both synthetic and real captured data validate the effectiveness of the proposed reconstruction method. Specifically, the proposed technique could save around 80% exposure time to achieve similar retrieval accuracy compared to the conventional FP. Besides, we have released our source code for non-commercial use.

physics.optics↗

arXiv2014

Content adaptive sparse illumination for Fourier ptychography

Fourier Ptychography (FP) is a recently proposed technique for large field of view and high resolution imaging. Specifically, FP captures a set of low resolution images under angularly varying illuminations and stitches them together in Fourier domain. One of FP's main disadvantages is its long capturing process due to the requisite large number of incident illumination angles. In this letter, utilizing the sparsity of natural images in Fourier domain, we propose a highly efficient method termed as AFP, which applies content adaptive sparse illumination for Fourier ptychography by capturing the most informative parts of the scene's spatial spectrum. We validate the effectiveness and efficiency of the reported framework with both simulations and real experiments. Results show that the proposed AFP could shorten the acquisition time of conventional FP by around 30%-60%.

physics.optics↗

arXiv2014

Self-synchronizing scheme for high speed computational ghost imaging

Computational ghost imaging needs to acquire a large number of correlated measurements between reference patterns and the scene for reconstruction, so extremely high acquisition speed is crucial for fast ghost imaging. With the development of technologies, high frequency illumination and detectors are both available, but their synchronization needs technique demanding customization and lacks flexibility for different setup configurations. This letter proposes a self-synchronization scheme that can eliminate this difficulty by introducing a high precision synchronization technique and corresponding algorithm. We physically implement the proposed scheme using a 20kHz spatial light modulator to generate random binary patterns together with a 100 times faster photodiode for high speed ghost imaging, and the acquisition frequency is around 14 times faster than that of state-of-the-arts.

physics.optics↗