arXiv subjects

Jinseok Choi

Publications and source records attributed to Jinseok Choi.

50 records · Page 3Linked to original sources

arXiv2019

Robust Learning-Based ML Detection for Massive MIMO Systems with One-Bit Quantized Signals

In this paper, we investigate learning-based maximum likelihood (ML) detection for uplink massive multiple-input and multiple-output (MIMO) systems with one-bit analog-to-digital converters (ADCs). To overcome the significant dependency of learning-based detection on the training length, we propose two one-bit ML detection methods: a biased-learning method and a dithering-and-learning method. The biased-learning method keeps likelihood functions with zero probability from wiping out the obtained information through learning, thereby providing more robust detection performance. Extending the biased method to a system with knowledge of the received signal-to-noise ratio, the dithering-and-learning method estimates more likelihood functions by adding dithering noise to the quantizer input. The proposed methods are further improved by adopting the post likelihood function update, which exploits correctly decoded data symbols as training pilot symbols. The proposed methods avoid the need for channel estimation. Simulation results validate the detection performance of the proposed methods in symbol error rate.

cs.IT↗

arXiv2019

Base Station Antenna Selection for Low-Resolution ADC Systems

This paper investigates antenna selection at a base station with large antenna arrays and low-resolution analog-to-digital converters. For downlink transmit antenna selection for narrowband channels, we show (1) a selection criterion that maximizes sum rate with zero-forcing precoding equivalent to that of a perfect quantization system; (2) maximum sum rate increases with number of selected antennas; (3) derivation of the sum rate loss function from using a subset of antennas; and (4) unlike high-resolution converter systems, sum rate loss reaches a maximum at a point of total transmit power and decreases beyond that point to converge to zero. For wideband orthogonal-frequency-division-multiplexing (OFDM) systems, our results hold when entire subcarriers share a common subset of antennas. For uplink receive antenna selection for narrowband channels, we (1) generalize a greedy antenna selection criterion to capture tradeoffs between channel gain and quantization error; (2) propose a quantization-aware fast antenna selection algorithm using the criterion; and (3) derive a lower bound on sum rate achieved by the proposed algorithm based on submodular functions. For wideband OFDM systems, we extend our algorithm and derive a lower bound on its sum rate. Simulation results validate theoretical analyses and show increases in sum rate over conventional algorithms.

eess.SP↗

arXiv2019

Antenna Selection for Large-Scale MIMO Systems with Low-Resolution ADCs

One way to reduce the power consumption in large-scale multiple-input multiple-output (MIMO) systems is to employ low-resolution analog-to-digital converters (ADCs). In this paper, we investigate antenna selection for large-scale MIMO receivers with low-resolution ADCs, thereby providing more flexibility in resolution and number of ADCs. To incorporate quantization effects, we generalize an existing objective function for a greedy capacity-maximization antenna selection approach. The derived objective function offers an opportunity to select an antenna with the best tradeoff between the additional channel gain and increase in quantization error. Using the generalized objective function, we propose an antenna selection algorithm based on a conventional antenna selection algorithm without an increase in overall complexity. Simulation results show that the proposed algorithm outperforms the conventional algorithm in achievable capacity for the same number of antennas.

cs.IT↗

arXiv2019

User Scheduling for Millimeter Wave Hybrid Beamforming Systems with Low-Resolution ADCs

We investigate uplink user scheduling for millimeter wave (mmWave) hybrid analog/digital beamforming systems with low-resolution analog-to-digital converters (ADCs). Deriving new scheduling criteria for the mmWave systems, we show that the channel structure in the beamspace, in addition to the channel magnitude and orthogonality, plays a key role in maximizing the achievable rates of scheduled users due to quantization error. The criteria show that to maximize the achievable rate for a given channel gain, the channels of the scheduled users need to have (1) as many propagation paths as possible with unique angle-of-arrivals (AoAs) and (2) even power distribution in the beamspace. Leveraging the derived criteria, we propose an efficient scheduling algorithm for mmWave zero-forcing receivers with low-resolution ADCs. We further propose a chordal distance-based scheduling algorithm that exploits only the AoA knowledge and analyze the performance by deriving ergodic rates in closed form. Based on the derived rates, we show that the beamspace channel leakage resulting from phase offsets between AoAs and quantized angles of analog combiners can lead to sum rate gain by reducing quantization error compared to the channel without leakage. Simulation results validate the sum rate performance of the proposed algorithms and derived ergodic rates expressions.

cs.IT↗

arXiv2019

Analysis of Ergodic Rate for Transmit Antenna Selection in Low-Resolution ADC Systems

In this paper, we analyze the ergodic rate of single transmit antenna selection (TAS) in low-resolution analog-to-digital converter (ADC) systems. Using low-resolution ADCs is a potential power-reduction solution for multiple antenna systems. Low-resolution ADC systems with TAS can further reduce cost and power consumption in wireless transceivers. Considering such systems, we derive the approximated lower bound of ergodic rate with TAS. Here, we exploit the approximated distribution of the sum of Weibull random variables to address the challenge involved in analyzing the quantization error. We, then, derive the approximated ergodic rate with TAS for a single receive antenna in closed form, which reveals the TAS gain in low-resolution ADC systems. The upper bound of a single transmit and single receive antenna system under coarse quantization is derived to compare with the ergodic rate of the TAS system. The analysis shows that the TAS method achieves a large improvement in ergodic rate with a moderate number of transmit antennas. Simulation results validate the derived ergodic rates and resulting intuition.

cs.IT↗

arXiv2018

A Hybrid Beamforming Receiver with Two-Stage Analog Combining and Low-Resolution ADCs

In this paper, we propose a two-stage analog combining architecture for millimeter wave (mmWave) communications with hybrid analog/digital beamforming and low-resolution analog-to-digital converters (ADCs). We first derive a two-stage combining solution by solving a mutual information (MI) maximization problem without a constant modulus constraint on analog combiners. With the derived solution, the proposed receiver architecture splits the analog combining into a channel gain aggregation stage followed by a spreading stage to maximize the MI by effectively managing quantization error. We show that the derived two-stage combiner achieves the optimal scaling law with respect to the number of radio frequency (RF) chains and maximizes the MI for homogeneous singular values of a MIMO channel. Then, we develop a two-stage analog combining algorithm to implement the derived solution under a constant modulus constraint for mmWave channels. Simulation results validate the algorithm performance in terms of MI.

cs.IT↗

arXiv2018

Two-Stage Analog Combining in Hybrid Beamforming Systems with Low-Resolution ADCs

In this paper, we investigate hybrid analog/digital beamforming for multiple-input multiple-output (MIMO) systems with low-resolution analog-to-digital converters (ADCs) for millimeter wave (mmWave) communications. In the receiver, we propose to split the analog combining subsystem into a channel gain aggregation stage followed by a spreading stage. Both stages use phase shifters. Our goal is to design the two-stage analog combiner to optimize mutual information (MI) between the transmitted and quantized signals by effectively managing quantization error. To this end, we formulate an unconstrained MI maximization problem without a constant modulus constraint on analog combiners, and derive a two-stage analog combining solution. The solution achieves the optimal scaling law with respect to the number of radio frequency chains and maximizes the MI for homogeneous singular values of a MIMO channel. We further develop a two-stage analog combining algorithm to implement the derived solution for mmWave channels. By decoupling channel gain aggregation and spreading functions from the derived solution, the proposed algorithm implements the two functions by using array response vectors and a discrete Fourier transform matrix under the constant modulus constraint on each matrix element. Therefore, the proposed algorithm provides a near optimal solution for the unconstrained problem, whereas conventional hybrid approaches offer a near optimal solution only for a constrained problem. The closed-form approximation of the ergodic rate is derived for the algorithm, showing that a practical digital combiner with two-stage analog combining also achieves the optimal scaling law. Simulation results validate the algorithm performance and the derived ergodic rate.

cs.IT↗

arXiv2018

Narrowband Channel Estimation for Hybrid Beamforming Millimeter Wave Communication Systems with One-bit Quantization

Millimeter wave (mmWave) spectrum has drawn attention due to its tremendous available bandwidth. The high propagation losses in the mmWave bands necessitate beamforming with a large number of antennas. Traditionally each antenna is paired with a high-speed analog-to-digital converter (ADC), which results in high power consumption. A hybrid beamforming architecture and one-bit resolution ADCs have been proposed to reduce power consumption. However, analog beamforming and one-bit quantization make channel estimation more challenging. In this paper, we propose a narrowband channel estimation algorithm for mmWave communication systems with one-bit ADCs and hybrid beamforming based on generalized approximate message passing (GAMP). We show through simulation that 1) GAMP variants with one-bit ADCs have better performance than do least-squares estimation methods without quantization, 2) the proposed one-bit GAMP algorithm achieves the lowest estimation error among the GAMP variants, and 3) exploiting more frames and RF chains enhances the channel estimation performance.

cs.IT↗

arXiv2018

User Scheduling for Millimeter Wave MIMO Communications with Low-Resolution ADCs

In millimeter wave (mmWave) systems, we investigate uplink user scheduling when a basestation employs low-resolution analog-to-digital converters (ADCs) with a large number of antennas. To reduce power consumption in the receiver, low-resolution ADCs can be a potential solution for mmWave systems in which many antennas are likely to be deployed to compensate for the large path loss. Due to quantization error, we show that the channel structure in the beamspace, in addition to the channel magnitude and beamspace orthogonality, plays a key role in maximizing the achievable rates of scheduled users. Consequently, we derive the optimal criteria with respect to the channel structure in the beamspace that maximizes the uplink sum rate for multi-user multiple input multiple output (MIMO) systems with a zero-forcing receiver. Leveraging the derived criteria, we propose an efficient scheduling algorithm for mmWave systems with low-resolution ADCs. Numerical results validate that the proposed algorithm outperforms conventional user scheduling methods in terms of the sum rate.

cs.IT↗

arXiv2017

ADC Bit Optimization for Spectrum- and Energy-Efficient Millimeter Wave Communications

A spectrum- and energy-efficient system is essential for millimeter wave communication systems that require large antenna arrays with power-demanding ADCs. We propose an ADC bit allocation (BA) algorithm that solves a minimum mean squared quantization error problem under a power constraint. Unlike existing BA methods that only consider an ADC power constraint, the proposed algorithm regards total receiver power constraint for a hybrid analog-digital beamforming architecture. The major challenge is the non-linearities in the minimization problem. To address this issue, we first convert the problem into a convex optimization problem through real number relaxation and substitution of ADC resolution switching power with constant average switching power. Then, we derive a closed-form solution by fixing the number of activated radio frequency (RF) chains M. Leveraging the solution, the binary search finds the optimal M and its corresponding optimal solution. We also provide an off-line training and modeling approach to estimate the average switching power. Simulation results validate the spectral and energy efficiency of the proposed algorithm. In particular, existing state-of-the-art digital beamformers can be used in the system in conjunction with the BA algorithm as it makes the quantization error negligible in the low-resolution regime.

cs.IT↗

arXiv2017

Wideband Channel Estimation for Hybrid Beamforming Millimeter Wave Communication Systems with Low-Resolution ADCs

A potential tremendous spectrum resource makes millimeter wave (mmWave) communications a promising technology. High power consumption due to a large number of antennas and analog-to-digital converters (ADCs) for beamforming to overcome the large propagation losses is problematic in practice. As a hybrid beamforming architecture and low-resolution ADCs are considered to reduce power consumption, estimation of mmWave channels becomes challenging. We evaluate several channel estimation algorithms for wideband mmWave systems with hybrid beamforming and low-resolution ADCs. Through simulation, we show that 1) infinite bit ADCs with least-squares estimation have worse channel estimation performance than do one-bit ADCs with orthogonal matching pursuit (OMP) in an SNR range of interest, 2) three- and four-bit quantizers can achieve channel estimation performance close to the unquantized case when using OMP, 3) a receiver with a single RF chain can yield better estimates than that with four RF chains if enough frames are exploited, and 4) for one-bit ADCs, exploitation of higher transmit power and more frames for performance enhancement adversely affects estimation performance after a certain point.

cs.IT↗

arXiv2017

Resolution-Adaptive Hybrid MIMO Architectures for Millimeter Wave Communications

In this paper, we propose a hybrid analog-digital beamforming architecture with resolution-adaptive ADCs for millimeter wave (mmWave) receivers with large antenna arrays. We adopt array response vectors for the analog combiners and derive ADC bit-allocation (BA) solutions in closed form. The BA solutions reveal that the optimal number of ADC bits is logarithmically proportional to the RF chain's signal-to-noise ratio raised to the 1/3 power. Using the solutions, two proposed BA algorithms minimize the mean square quantization error of received analog signals under a total ADC power constraint. Contributions of this paper include 1) ADC bit-allocation algorithms to improve communication performance of a hybrid MIMO receiver, 2) approximation of the capacity with the BA algorithm as a function of channels, and 3) a worst-case analysis of the ergodic rate of the proposed MIMO receiver that quantifies system tradeoffs and serves as the lower bound. Simulation results demonstrate that the BA algorithms outperform a fixed-ADC approach in both spectral and energy efficiency, and validate the capacity and ergodic rate formula. For a power constraint equivalent to that of fixed 4-bit ADCs, the revised BA algorithm makes the quantization error negligible while achieving 22% better energy efficiency. Having negligible quantization error allows existing state-of-the-art digital beamformers to be readily applied to the proposed system.

cs.IT↗

arXiv2017

ADC Bit Allocation under a Power Constraint for MmWave Massive MIMO Communication Receivers

Millimeter wave (mmWave) systems operating over a wide bandwidth and using a large number of antennas impose a heavy burden on power consumption. In a massive multiple-input multiple-output (MIMO) uplink, analog-to-digital con- verters (ADCs) would be the primary consumer of power in the base station receiver. This paper proposes a bit allocation (BA) method for mmWave multi-user (MU) massive MIMO systems under a power constraint. We apply ADCs to the outputs of an analog phased array for beamspace projection to exploit mmWave channel sparsity. We relax a mean square quantization error (MSQE) minimization problem and map the closed-form solution to non-negative integer bits at each ADC. In link-level simulations, the proposed method gives better communication performance than conventional low-resolution ADCs for the same or less power. Our contribution is a near optimal low-complexity BA method that minimizes total MSQE under a power constraint.

cs.IT↗

arXiv2016

Spectral Efficiency Bounds for Interference-Limited SVD-MIMO Cellular Communication Systems

The ergodic spectral efficiency (SE) in interference-limited multiple-input multiple-output (MIMO) downlink cellular systems is characterized based on stochastic geometry. A single user is served by using singular value decomposition precoding and combining. By approximating the expectations of the channel eigenvalues, we derive upper and lower bounds on the ergodic SE. The obtained upper bound is the best possible system-level performance of any MIMO strategy in non-cooperative cellular networks. We validate our analytical results through simulation. We also conjecture that there exists the optimal number of streams being proportional to the pathloss exponent.

cs.IT↗