arXiv subjects

Jinsong Hu

Publications and source records attributed to Jinsong Hu.

At least 19 recordsLinked to original sources

arXiv2025

Twisting Signals for Joint Radar-Communications: An OAM Vortex Beam Approach

Orbital angular momentum (OAM) technology has attracted much research interest in recent years because of its characteristic helical phase front twisting around the propagation axis and natural orthogonality among different OAM states to encode more degrees of freedom than classical planar beams. Leveraging upon these features, OAM technique has been applied to wireless communication systems to enhance spectral efficiency and radar systems to distinguish spatial targets without beam scanning. Leveraging upon these unique properties, we propose an OAM-based millimeter-wave joint radar-communications (JRC) system comprising a bi-static automotive radar and vehicle-to-vehicle (V2V) communications. Different from existing uniform circular array (UCA) based OAM systems where each element is an isotropic antenna, an OAM spatial modulation scheme utilizing a uniform linear array (ULA) is adopted with each element being a traveling-wave antenna, producing multiple Laguerre-Gaussian (LG) vortex beams simultaneously. Specifically, we first build a novel bi-static automotive OAM-JRC model that embeds communication messages in a radar signal, following which a target position and velocity parameters estimation algorithm is designed with only radar frames. Then, an OAM-based mode-division multiplexing (MDM) strategy between radar and JRC frames is presented to ensure the JRC parameters identifiability and recovery. Furthermore, we analyze the performance of the JRC system through deriving recovery guarantees and Cramér-Rao lower bound (CRLB) of radar target parameters and evaluating the bit error rate (BER) of communication, respectively. Our numerical experiments validate the effectiveness of the proposed OAM-based JRC system and parameter estimation method.

eess.SP↗

arXiv2024

One-Dimensional Ionic-Bonded Structures in NiSe Nanowire

One-dimensional van der Waals (1D vdW) materials, characterized by atomic chains bonded ionically or covalently in one direction and held together by van der Waals interactions in the perpendicular directions, have recently gained intensive attention due to their exceptional functions. In this work, we report the discovery of 1D ionic-bonded structures in NiSe nanowires. Utilizing aberration-corrected scanning transmission electron microscopy, we identified four distinct structural phases composed of two fundamental 1D building blocks: a triangle-shaped unit and a parallelogram-shaped unit. These phases can transform into one another through topotactic combinations of the structural units. Density functional theory calculations reveal that these structural units are bound by ionic bonds, unlike the van der Waals forces typically found in 1D vdW materials. The diverse arrangements of these building blocks may give rise to unique electronic structures and magnetic properties, paving the way for designing advanced materials with novel functionalities.

cond-mat.mes-hall↗

arXiv2023

Hybrid Relay-Reflecting Intelligent Surface-Aided Covert Communications

In this paper, we propose to use a hybrid relay-reflecting intelligent surface (HR-RIS) to enhance the performance of a covert communication system. Specifically, the HR-RIS consists of passive reflecting elements and active relay elements to manipulate the wireless signals from a transmitter to a desired receiver while ensuring the covertness of the transmission via avoiding such signals being detected by a warden. To fully explore the benefits offered by the HR-RIS, we first formulate the joint design of the transmit power and relay/reflection coefficients of the HR-RIS as an optimization problem to maximize the covert rate subject to a covertness constraint. To tackle the solution to this optimization problem, we then derive a closed-form expression for an upper bound on covert rate, based on which we develop an alternate algorithm to solve the formulated optimization problem. Our examination shows that the HR-RIS outperforms the traditional RIS in term of achieving a higher covert rate. Interestingly, we also observe the major part of the performance gain brought by the HR-RIS can be obtained by a small number of active relay elements (e.g., 5) and further increasing this number does not improve the covert communication performance.

cs.IT↗

arXiv2023

Machine Learning Methods for Inferring the Number of UAV Emitters via Massive MIMO Receive Array

To provide important prior knowledge for the DOA estimation of UAV emitters in future wireless networks, we present a complete DOA preprocessing system for inferring the number of emitters via massive MIMO receive array. Firstly, in order to eliminate the noise signals, two high-precision signal detectors, square root of maximum eigenvalue times minimum eigenvalue (SR-MME) and geometric mean (GM), are proposed. Compared to other detectors, SR-MME and GM can achieve a high detection probability while maintaining extremely low false alarm probability. Secondly, if the existence of emitters is determined by detectors, we need to further confirm their number. Therefore, we perform feature extraction on the the eigenvalue sequence of sample covariance matrix to construct feature vector and innovatively propose a multi-layer neural network (ML-NN). Additionally, the support vector machine (SVM), and naive Bayesian classifier (NBC) are also designed. The simulation results show that the machine learning-based methods can achieve good results in signal classification, especially neural networks, which can always maintain the classification accuracy above 70\% with massive MIMO receive array. Finally, we analyze the classical signal classification methods, Akaike (AIC) and Minimum description length (MDL). It is concluded that the two methods are not suitable for scenarios with massive MIMO arrays, and they also have much worse performance than machine learning-based classifiers.

eess.SP↗

arXiv2022

SPQE: Structure-and-Perception-Based Quality Evaluation for Image Super-Resolution

The image Super-Resolution (SR) technique has greatly improved the visual quality of images by enhancing their resolutions. It also calls for an efficient SR Image Quality Assessment (SR-IQA) to evaluate those algorithms or their generated images. In this paper, we focus on the SR-IQA under deep learning and propose a Structure-and-Perception-based Quality Evaluation (SPQE). In emerging deep-learning-based SR, a generated high-quality, visually pleasing image may have different structures from its corresponding low-quality image. In such case, how to balance the quality scores between no-reference perceptual quality and referenced structural similarity is a critical issue. To help ease this problem, we give a theoretical analysis on this tradeoff and further calculate adaptive weights for the two types of quality scores. We also propose two deep-learning-based regressors to model the no-reference and referenced scores. By combining the quality scores and their weights, we propose a unified SPQE metric for SR-IQA. Experimental results demonstrate that the proposed method outperforms the state-of-the-arts in different datasets.

eess.IV↗

arXiv2021

Physical Layer Security Techniques for Future Wireless Networks

The broadcast nature of wireless communication systems makes wireless transmission extremely susceptible to eavesdropping and even malicious interference. Physical layer security technology can effectively protect the private information sent by the transmitter from being listened to by illegal eavesdroppers, thus ensuring the privacy and security of communication between the transmitter and legitimate users. The development of mobile communication presents new challenges to physical layer security research. This paper provides a comprehensive survey of the physical layer security research on various promising mobile technologies, including directional modulation (DM), spatial modulation (SM), covert communication, intelligent reflecting surface (IRS)-aided communication, and so on. Finally, future trends and the unresolved technical challenges are summarized in physical layer security for mobile communications.

cs.CR↗

arXiv2020

Directional Modulation-Enabled Secure Transmission with Intelligent Reflecting Surface

We propose a new secure transmission scheme which uses directional modulation (DM) with artificial noise and is aided by the intelligent reflecting surface (IRS). Specifically, the direct path and IRS-enabled reflect path carry the same confidential signal and thus can be coherently added at the desired position to maximize the total received power, while the received signals at other positions are distorted. We derive a closed-form expression for the secrecy rate achieved by the proposed scheme. Using simulation results, we show that the proposed scheme can achieve two-dimensional secure transmission at a specific position. Also, its performance advantage over the conventional DM scheme becomes more pronounced as the number of reflecting elements at the IRS increases.

eess.SP↗

arXiv2020

Establishing Secrecy Region for Directional Modulation Scheme with Random Frequency Diverse Array

Random frequency diverse array (RFDA) based directional modulation (DM) was proposed as a promising technology in secure communications to achieve a precise transmission of confidential messages, and artificial noise (AN) was considered as an important helper in RFDA-DM. Compared with previous works that only focus on the spot of the desired receiver, in this work, we investigate a secrecy region around the desired receiver, that is, a specific range and angle resolution around the desired receiver. Firstly, the minimum number of antennas and the bandwidth needed to achieve a secrecy region are derived. Moreover, based on the lower bound of the secrecy capacity in RFDA-DM-AN scheme, we investigate the performance impact of AN on the secrecy capacity. From this work, we conclude that: 1) AN is not always beneficial to the secure transmission. Specifically, when the number of antennas is sufficiently large and the transmit power is smaller than a specified value, AN will reduce secrecy capacity due to the consumption of limited transmit power. 2) Increasing bandwidth will enlarge the set for randomly allocating frequencies and thus lead to a higher secrecy capacity. 3) The minimum number of antennas increases as the predefined secrecy transmission rate increases.

cs.IT↗

arXiv2019

Pilot-Based Channel Estimation Design in Covert Wireless Communication

In this work, for the first time, we tackle channel estimation design with pilots in the context of covert wireless communication. Specifically, we consider Rayleigh fading for the communication channel from a transmitter to a receiver and additive white Gaussian noise (AWGN) for the detection channel from the transmitter to a warden. Before transmitting information signals, the transmitter has to send pilots to enable channel estimation at the receiver. Using a lower bound on the detection error probability, we first prove that transmitting pilot and information signals with equal power can minimize the detection performance at the warden, which is confirmed by the minimum detection error probability achieved by the optimal detector based on likelihood ratio test. This motivates us to consider the equal transmit power in the channel estimation and then optimize channel use allocation between pilot and information signals in covert wireless communication. Our analysis shows that the optimal number of the channel uses allocated to pilots increases as the covertness constraint becomes tighter. In addition, our examination shows that the optimal percentage of all the available channel uses allocated to channel estimation decreases as the total number of channel uses increases.

cs.IT↗

arXiv2019

Joint Optimization of a UAV's Trajectory and Transmit Power for Covert Communications

This work considers covert communications in the context of unmanned aerial vehicle (UAV) networks, aiming to hide a UAV for transmitting critical information out of a scenario that is monitored and where communication is not allowed. Specifically, the UAV as a transmitter intends to transmit information to a legitimate receiver (Bob) covertly in order to avoid being detected by a warden (Willie) with location uncertainties at Bob and/or Willie. In order to enhance the considered covert communication performance, we prefer to jointly optimize the UAV's trajectory and transmit power in terms of maximizing the average covert transmission rate from the UAV to Bob subject to transmission outage constraint and covertness constraint. The formulated optimization problem is difficult to tackle directly due to the intractable constraints. As such, we first employ conservative approximation to transform a constraint into a deterministic form and then apply the first-order restrictive approximation to transform the optimization problem into a convex form. By applying the successive convex approximation (SCA) technique, an efficient iterative algorithm is developed to solve the optimization problem. Our examination shows that the developed joint trajectory and transmit power optimization scheme achieves significantly better covert communication performance as compared to a benchmark scheme.

cs.IT↗

arXiv2019

Low Probability of Detection Communication: Opportunities and Challenges

Low probability of detection (LPD) communication has recently emerged as a new transmission technology to address privacy and security in wireless networks. Recent studies have established the fundamental limits of LPD communication in terms of the amount of information bits that can be conveyed from a transmitter to a receiver subject to a constraint on a warden's detection error probability. The established information-theoretic metric enables analytical studies on the design and performance of LPD communication under various channel conditions. In this article, we present the key features of LPD communication and discuss various important design considerations. Firstly, we clarify the differences between LPD communication and the well-known physical-layer security. Then, from an information-theoretic point of view, we discuss the optimal signalling strategies for transmitting the message-carrying signal and artificial-noise signal for LPD communication. Finally, we identify the key challenges in the design of practical LPD communication systems and point out future research directions in this context. This article provides guidelines for designing practical LPD communication strategies in wireless systems and networks.

cs.IT↗

arXiv2019

Covert Transmission with a Self-sustained Relay

This work examines the possibility, performance limits, and associated costs for a self-sustained relay to transmit its own covert information to a destination on top of forwarding the source's information. Since the source provides energy to the relay for forwarding its information, the source does not allow the relay's covert transmission and is to detect it. Considering the time switching (TS) and power splitting (PS) schemes for energy harvesting, where all the harvested energy is used for transmission at the self-sustained relay, we derive the minimum detection error probability $ξ^{\ast}$ at the source, based on which we determine the maximum effective covert rate $Ψ^{\ast}$ subject to a given covertness constraint on $ξ^{\ast}$. Our analysis shows that $ξ^{\ast}$ is the same for the TS and PS schemes, which leads to the fact that the cost of achieving $Ψ^{\ast}$ in both the two schemes in terms of the required increase in the energy conversion efficiency at the relay is the same, although the values of $Ψ^{\ast}$ in these two schemes can be different in specific scenarios. For example, the TS scheme outperforms the PS scheme in terms of achieving a higher $Ψ^{\ast}$ when the transmit power at the source is relatively low. If the covertness constraint is tighter than a specific value, it is the covertness constraint that limits $Ψ^{\ast}$, and otherwise it is upper bound on the energy conversion efficiency that limits $Ψ^{\ast}$.

cs.IT↗

arXiv2019

Performance Analysis of Directional Modulation with Finite-quantized RF Phase Shifters in Analog Beamforming Structure

The radio frequency (RF) phase shifter with finite quantization bits in analog beamforming (AB) structure forms quantization error (QE) and causes a performance loss of received signal to interference plus noise ratio (SINR) at the receiver (called Bob). By using the law of large numbers in probability theory, the closed-form expression of SINR performance loss is derived to be inversely proportional to the square of sinc (or sin(x)/x) function. Here, a phase alignment method is applied in directional modulation transmitter with AB structure. Also, the secrecy rate (SR) expression is derived with QE. From numerical simulation results, we find that the SINR performance loss gradually decreases as the number L of quantization bits increases. This loss is less than 0.3dB when L is larger than or equal to 3. As L exceeds 5, the SINR performance loss at Bob can be approximately trivial. Similarly, SR performance loss gradually reduces as L increases. In particular, the SR performance loss is about 0.1 bits/s/Hz for L=3 at signal-to-noise ratio of 15dB.

cs.IT↗

arXiv2019

Optimal Detection of UAV's Transmission with Beam Sweeping in Wireless Networks

In this work, an detection strategy based on multiple antennas with beam sweeping is developed to detect UAV's potential transmission in wireless networks. Specifically, suspicious angle range where the UAV may present is divided into different sectors to potentially increase detection accuracy by using beamforming gain. We then develop the optimal detector and derive its detection error probability in a closed-form expression. We also utilize the Pinsker's inequality and Kullback-Leibler divergence to yield low-complex approximation for the detection error probability, based on which we obtain some significant insights on the detection performance. Our examination shows that there exists an optimal number of sectors that can minimize the detection error probability in some scenarios (e.g., when the number of measurements is limited). Intuitively, this can be explained by the fact that there exists an optimal accuracy of the telescope used to find an object in the sky within limited time period.

cs.IT↗

arXiv2019

Delay-Constrained Covert Communications with A Full-Duplex Receiver

In this work, we consider delay-constrained covert communications with the aid of a full-duplex (FD) receiver. Without delay constraints, it has been shown that the transmit power of artificial noise (AN) at the FD receiver should be random in order to enhance covert communications. In this work, we show that transmitting AN with a fixed power indeed improve covert communications with delay constraints, since in a limited time period the warden cannot exactly learn its received power. This explicitly shows one benefit of considering practical delay constraints in the context of covert communications. We analyze the optimal transmit power of AN for either fixed or globally optimized transmit power of covert information, based on which we also determine the specific condition under which transmitting AN by the FD receiver can aid covert communications and a larger transmit power of AN always leads to better covert communication performance.

eess.SP↗

arXiv2018

Covert Wireless Communications with Channel Inversion Power Control in Rayleigh Fading

In this work, we adopt channel inversion power control (CIPC) to achieve covert communications aided by a full-duplex receiver. Specifically, the transmitter varies the power and phase of transmitted signals as per the channel to the receiver, such that the receiver can decode these signals without knowing the channel state information. This eliminates the required feedback from the transmitter to the receiver, which aids hiding the transmitter from a warden. The truncated CIPC and conventional CIPC schemes are proposed and examined, where for truncated CIPC covert transmission ceases when the channel quality from the transmitter to the receiver is low, while for conventional CIPC covert transmission always occurs regardless of this channel quality. We examine their performance in terms of the achieved effective covert throughput (ECT), which quantifies the amount of information that the transmitter can reliably convey to the receiver, subject to the constraint that the warden's detection error probability is no less than some specific value. Our examination shows that the truncated CIPC scheme can outperform the conventional CIPC scheme due to this constraint.

cs.IT↗

arXiv2018

Achieving Covert Wireless Communications Using a Full-Duplex Receiver

Covert communications hide the transmission of a message from a watchful adversary while ensuring a certain decoding performance at the receiver. In this work, a wireless communication system under fading channels is considered where covertness is achieved by using a full-duplex (FD) receiver. More precisely, the receiver of covert information generates artificial noise with a varying power causing uncertainty at the adversary, Willie, regarding the statistics of the received signals. Given that Willie's optimal detector is a threshold test on the received power, we derive a closed-form expression for the optimal detection performance of Willie averaged over the fading channel realizations. Furthermore, we provide guidelines for the optimal choice of artificial noise power range, and the optimal transmission probability of covert information to maximize the detection errors at Willie. Our analysis shows that the transmission of artificial noise, although causes self-interference, provides the opportunity of achieving covertness but its transmit power levels need to be managed carefully. We also demonstrate that the prior transmission probability of 0.5 is not always the best choice for achieving the maximum possible covertness, when the covert transmission probability and artificial noise power can be jointly optimized.

cs.IT↗

arXiv2018

Covert Communication Achieved by A Greedy Relay in Wireless Networks

Covert communication aims to hide the very existence of wireless transmissions in order to guarantee a strong security in wireless networks. In this work, we examine the possibility and achievable performance of covert communication in one-way relay networks. Specifically, the relay is greedy and opportunistically transmits its own information to the destination covertly on top of forwarding the source's message, while the source tries to detect this covert transmission to discover the illegitimate usage of the resource (e.g., power, spectrum) allocated only for the purpose of forwarding source's information. We propose two strategies for the relay to transmit its covert information, namely fixed-rate and fixed-power transmission schemes, for which the source's detection limits are analysed in terms of the false alarm and miss detection rates and the achievable effective covert rates from the relay to destination are derived. Our examination determines the conditions under which the fixed-rate transmission scheme outperforms the fixed-power transmission scheme, and vice versa, which enables the relay to achieve the maximum effective covert rate. Our analysis indicates that the relay has to forward the source's message to shield its covert transmission and the effective covert rate increases with its forwarding ability (e.g., its maximum transmit power).

cs.IT↗