arXiv subjects

Jinyu Zhao

Publications and source records attributed to Jinyu Zhao.

30 records · Page 2Linked to original sources

arXiv2023

No evidence of superconductivity in the compressed sample prepared from the lutetium foil and H2/N2 gas mixture

A material described as lutetium-hydrogen-nitrogen (Lu-H-N in short) was recently claimed to have near-ambient superconductivity[Gammon et al, Nature 615, 244, 2023]. If the results could be reproduced by other teams, it would be a major scientific breakthrough. Here, we report our results of transport and structure measurements on a material prepared using the same method as that reported by Gammon et al. Our X-ray diffraction measurements indicated that the obtained sample contained three substances: the FCC-1 phase (Fm-3m) with a lattice parameter a=5.03 Å, the FCC-2 phase (Fm-3m) with a lattice parameter a= 4.755 Å and Lu metal. These two FCC phases are identical to the those reported in the so-called near-ambient superconductor. However, we found that the samples had no evidence of superconductivity, through our resistance measurements in the temperature range of 300 - 4 K and pressure range of 0.9 - 3.4 GPa, and our magnetic susceptibility measurements in the pressure range of 0.8-3.3 GPa and temperature down to 100 K. We also used a laser heating technique to heat the sample to 1800°C and found no superconductivity in the produced dark blue samples below 6.5 GPa. In addition, the color of the both samples remain dark blue in the pressure range investigated.

cond-mat.supr-con↗

arXiv2023

The breakdown of both strange metal and superconducting states at a pressure-induced quantum critical point in iron-pnictide superconductors

The strange metal (SM) state, characterized by a linear-in-temperature resistivity, is often seen in the normal state of high temperature superconductors. It is believed that the SM state is one of the keys to understand the underlying mechanism of high-Tc superconductivity. Here we report the first observation of the concurrent breakdown of the SM normal state and superconductivity at a pressure-induced quantum critical point in an iron-pnictide superconductor, Ca10(Pt4As8)((Fe0.97Pt0.03)2As2)5. We find that, upon suppressing the superconducting state by applying pressure, the power exponent changes from 1 to 2, and the corresponding coefficient A, the slope of the temperature-linear resistivity per FeAs layer, gradually diminishes. At a critical pressure (12.5 GPa), A and Tc go to zero concurrently,where a quantum phase transition (QPT) from a superconducting state with a SM normal state to a non-superconducting Fermi liquid state takes place. Scaling analysis on the results obtained from the pressurized 1048 superconductor reveals that A and Tc have a positive relation, which exhibits a similarity with that is seen in other chemically-doped unconventional superconductors, regardless of the type of the tuning method (doping or pressurizing), the crystal structure, the bulk or film superconductors and the nature of dopant. These results suggest that there is a simple but powerful organizational principle of connecting the SM normal state with the high-Tc superconductivity.

cond-mat.supr-con↗

arXiv2023

Pressure-induced coevolution of transport properties and lattice stability in CaK(Fe1-xNix)4As4 (x= 0.04 and 0) superconductors with and without spin-vortex crystal state

Here we report the first investigation on correlation between the transport properties and the corresponding stability of the lattice structure for CaK(Fe1-xNix)4As4 (x=0.04 and 0), a new type of putative topological superconductors, with and without a spin-vortex crystal (SVC) state in a wide pressure range involving superconducting to non-superconducting transition and the half- to full-collapse of tetragonal (h-cT and f-cT) phases, by the complementary measurements of high-pressure resistance, Hall coefficient and synchrotron X-ray diffraction. We identify the three critical pressures, P1 that is the turn-on critical pressure of the h-cT phase transition and it coincides with the critical pressure for the sign change of Hall coefficient from positive to negative, a manifestation of the Fermi surface reconstruction, P2 that is the turn-off pressures of the h-cT phase transition, and P3 that is the critical pressure of the f-cT phase transition. By comparing the high-pressure results measured from the two kinds of samples, we find a distinct left-shift of the P1 for the doped sample, at the pressure of which its SVC state is fully suppressed, however the P2 and the P3 remain the same as that of the undoped one. Our results not only provide a consistent understanding on the results reported before, but also demonstrate the importance of the Fe-As bonding in stabilizing the superconductivity of the iron pnictide superconductors through the pressure window.

cond-mat.supr-con↗

arXiv2022

Polarimetric Multi-View Inverse Rendering

A polarization camera has great potential for 3D reconstruction since the angle of polarization (AoP) and the degree of polarization (DoP) of reflected light are related to an object's surface normal. In this paper, we propose a novel 3D reconstruction method called Polarimetric Multi-View Inverse Rendering (Polarimetric MVIR) that effectively exploits geometric, photometric, and polarimetric cues extracted from input multi-view color-polarization images. We first estimate camera poses and an initial 3D model by geometric reconstruction with a standard structure-from-motion and multi-view stereo pipeline. We then refine the initial model by optimizing photometric rendering errors and polarimetric errors using multi-view RGB, AoP, and DoP images, where we propose a novel polarimetric cost function that enables an effective constraint on the estimated surface normal of each vertex, while considering four possible ambiguous azimuth angles revealed from the AoP measurement. The weight for the polarimetric cost is effectively determined based on the DoP measurement, which is regarded as the reliability of polarimetric information. Experimental results using both synthetic and real data demonstrate that our Polarimetric MVIR can reconstruct a detailed 3D shape without assuming a specific surface material and lighting condition.

cs.CV↗

arXiv2022

The role of drop shape in impact and splash

The impact and splash of liquid drops on solid substrates are ubiquitous in many important fields. However, previous studies have mainly focused on spherical drops while the non-spherical situations, such as raindrops, charged drops, oscillating drops, and drops affected by electromagnetic field, remain largely unexplored. Using ferrofluid, we realize various drop shapes and illustrate the fundamental role of shape in impact and splash. Experiments show that different drop shapes produce large variations in spreading dynamics, splash onset, and splash amount. However, underlying all these variations we discover universal mechanisms across various drop shapes: the impact dynamics is governed by the superellipse model, the splash onset is triggered by the Kelvin-Helmholtz instability, and the amount of splash is determined by the energy dissipation before liquid taking off. Our study generalizes the drop impact research beyond the spherical geometry, and reveals the potential of using drop shape to control impact and splash.

physics.flu-dyn↗

arXiv2022

A new method incorporating deep learning with shape priors for left ventricular segmentation in myocardial perfusion SPECT images

Background: The assessment of left ventricular (LV) function by myocardial perfusion SPECT (MPS) relies on accurate myocardial segmentation. The purpose of this paper is to develop and validate a new method incorporating deep learning with shape priors to accurately extract the LV myocardium for automatic measurement of LV functional parameters. Methods: A segmentation architecture that integrates a three-dimensional (3D) V-Net with a shape deformation module was developed. Using the shape priors generated by a dynamic programming (DP) algorithm, the model output was then constrained and guided during the model training for quick convergence and improved performance. A stratified 5-fold cross-validation was used to train and validate our models. Results: Results of our proposed method agree well with those from the ground truth. Our proposed model achieved a Dice similarity coefficient (DSC) of 0.9573(0.0244), 0.9821(0.0137), and 0.9903(0.0041), a Hausdorff distances (HD) of 6.7529(2.7334) mm, 7.2507(3.1952) mm, and 7.6121(3.0134) mm in extracting the endocardium, myocardium, and epicardium, respectively. Conclusion: Our proposed method achieved a high accuracy in extracting LV myocardial contours and assessing LV function.

eess.IV↗

arXiv2022

In-plane anisotropic response to the uniaxial pressure in the hidden order state of URu$_2$Si$_2$

We studied the uniaxial-pressure dependence of the resistivity for URu$_{2-x}$Fe$_x$Si$_2$ samples with $x$ = 0 and 0.2, which host a hidden order (HO) and a large-moment antiferromagnetic (LMAFM) phase, respectively. For both samples, the elastoresistivity $ζ$ shows a seemingly divergent behavior above the transition temperature $T_0$ and a quick decrease below it. We found that the temperature dependence of $ζ$ for both samples can be well described by assuming the uniaxial pressure effect on the gap or certain energy scale except for $ζ_{(110)}$ of the $x$ = 0 sample, which exhibits a non-zero residual value at 0 K. We show that this provides a qualitative difference between the HO and LMAFM phases. Our results suggest that there is an in-plane anisotropic response to the uniaxial pressure that only exists in the hidden order state without necessarily breaking the rotational lattice symmetry.

cond-mat.str-el↗

arXiv2020

Unsupervised Embedding of Hierarchical Structure in Euclidean Space

Deep embedding methods have influenced many areas of unsupervised learning. However, the best methods for learning hierarchical structure use non-Euclidean representations, whereas Euclidean geometry underlies the theory behind many hierarchical clustering algorithms. To bridge the gap between these two areas, we consider learning a non-linear embedding of data into Euclidean space as a way to improve the hierarchical clustering produced by agglomerative algorithms. To learn the embedding, we revisit using a variational autoencoder with a Gaussian mixture prior, and we show that rescaling the latent space embedding and then applying Ward's linkage-based algorithm leads to improved results for both dendrogram purity and the Moseley-Wang cost function. Finally, we complement our empirical results with a theoretical explanation of the success of this approach. We study a synthetic model of the embedded vectors and prove that Ward's method exactly recovers the planted hierarchical clustering with high probability.

cs.LG↗

arXiv2020

Polarimetric Multi-View Inverse Rendering

A polarization camera has great potential for 3D reconstruction since the angle of polarization (AoP) of reflected light is related to an object's surface normal. In this paper, we propose a novel 3D reconstruction method called Polarimetric Multi-View Inverse Rendering (Polarimetric MVIR) that effectively exploits geometric, photometric, and polarimetric cues extracted from input multi-view color polarization images. We first estimate camera poses and an initial 3D model by geometric reconstruction with a standard structure-from-motion and multi-view stereo pipeline. We then refine the initial model by optimizing photometric and polarimetric rendering errors using multi-view RGB and AoP images, where we propose a novel polarimetric rendering cost function that enables us to effectively constrain each estimated surface vertex's normal while considering four possible ambiguous azimuth angles revealed from the AoP measurement. Experimental results using both synthetic and real data demonstrate that our Polarimetric MVIR can reconstruct a detailed 3D shape without assuming a specific polarized reflection depending on the material.

cs.CV↗

arXiv2020

COVID-CT-Dataset: A CT Scan Dataset about COVID-19

During the outbreak time of COVID-19, computed tomography (CT) is a useful manner for diagnosing COVID-19 patients. Due to privacy issues, publicly available COVID-19 CT datasets are highly difficult to obtain, which hinders the research and development of AI-powered diagnosis methods of COVID-19 based on CTs. To address this issue, we build an open-sourced dataset -- COVID-CT, which contains 349 COVID-19 CT images from 216 patients and 463 non-COVID-19 CTs. The utility of this dataset is confirmed by a senior radiologist who has been diagnosing and treating COVID-19 patients since the outbreak of this pandemic. We also perform experimental studies which further demonstrate that this dataset is useful for developing AI-based diagnosis models of COVID-19. Using this dataset, we develop diagnosis methods based on multi-task learning and self-supervised learning, that achieve an F1 of 0.90, an AUC of 0.98, and an accuracy of 0.89. According to the senior radiologist, models with such performance are good enough for clinical usage. The data and code are available at https://github.com/UCSD-AI4H/COVID-CT

cs.LG↗

arXiv2018

Melodic Phrase Segmentation By Deep Neural Networks

Automated melodic phrase detection and segmentation is a classical task in content-based music information retrieval and also the key towards automated music structure analysis. However, traditional methods still cannot satisfy practical requirements. In this paper, we explore and adapt various neural network architectures to see if they can be generalized to work with the symbolic representation of music and produce satisfactory melodic phrase segmentation. The main issue of applying deep-learning methods to phrase detection is the sparse labeling problem of training sets. We proposed two tailored label engineering with corresponding training techniques for different neural networks in order to make decisions at a sequential level. Experiment results show that the CNN-CRF architecture performs the best, being able to offer finer segmentation and faster to train, while CNN, Bi-LSTM-CNN and Bi-LSTM-CRF are acceptable alternatives.

cs.LG↗

arXiv2009

Frequency dependent deformation of liquid crystal droplets in an external electric field

Nematic drops suspended in the isotropic phase of the same substance were subjected to alternating electrical fields of varying frequency. The system was carefully kept in the isotropic-nematic coexistance region, which was broadened due to small amounts of non-mesogenic additives. Whereas the droplets remained spherical at low (order of 10 Hz) and high frequencies (in the kHz range), at intermediate frequencies, we observed a marked flattening of the droplet in the plane perpendicular to the applied field. The deformation of the liquid crystal (LC) droplets occurred both in substances with positive and negative dielectric anisotropy. The experimental data can be quantitatively modelled with a combination of the leaky dielectric model and screening of the applied electric field due to the finite conductivity.

cond-mat.soft↗