arXiv subjects

Jitendra Bhandari

Publications and source records attributed to Jitendra Bhandari.

14 recordsLinked to original sources

arXiv2025

VeriLoC: Line-of-Code Level Prediction of Hardware Design Quality from Verilog Code

Modern chip design is complex, and there is a crucial need for early-stage prediction of key design-quality metrics like timing and routing congestion directly from Verilog code (a commonly used programming language for hardware design). It is especially important yet complex to predict individual lines of code that cause timing violations or downstream routing congestion. Prior works have tried approaches like converting Verilog into an intermediate graph representation and using LLM embeddings alongside other features to predict module-level quality, but did not consider line-level quality prediction. We propose VeriLoC, the first method that predicts design quality directly from Verilog at both the line- and module-level. To this end, VeriLoC leverages recent Verilog code-generation LLMs to extract local line-level and module-level embeddings, and train downstream classifiers/regressors on concatenations of these embeddings. VeriLoC achieves high F1-scores of 0.86-0.95 for line-level congestion and timing prediction, and reduces the mean average percentage error from 14% - 18% for SOTA methods down to only 4%. We believe that VeriLoC embeddings and insights from our work will also be of value for other predictive and optimization tasks for complex hardware design.

cs.AR↗

arXiv2025

SALAD: Systematic Assessment of Machine Unlearning on LLM-Aided Hardware Design

Large Language Models (LLMs) offer transformative capabilities for hardware design automation, particularly in Verilog code generation. However, they also pose significant data security challenges, including Verilog evaluation data contamination, intellectual property (IP) design leakage, and the risk of malicious Verilog generation. We introduce SALAD, a comprehensive assessment that leverages machine unlearning to mitigate these threats. Our approach enables the selective removal of contaminated benchmarks, sensitive IP and design artifacts, or malicious code patterns from pre-trained LLMs, all without requiring full retraining. Through detailed case studies, we demonstrate how machine unlearning techniques effectively reduce data security risks in LLM-aided hardware design.

cs.LG↗

arXiv2025

ARIANNA: An Automatic Design Flow for Fabric Customization and eFPGA Redaction

In the modern global Integrated Circuit (IC) supply chain, protecting intellectual property (IP) is a complex challenge, and balancing IP loss risk and added cost for theft countermeasures is hard to achieve. Using embedded configurable logic allows designers to completely hide the functionality of selected design portions from parties that do not have access to the configuration string (bitstream). However, the design space of redacted solutions is huge, with trade-offs between the portions selected for redaction and the configuration of the configurable embedded logic. We propose ARIANNA, a complete flow that aids the designer in all the stages, from selecting the logic to be hidden to tailoring the bespoke fabrics for the configurable logic used to hide it. We present a security evaluation of the considered fabrics and introduce two heuristics for the novel bespoke fabric flow. We evaluate the heuristics against an exhaustive approach. We also evaluate the complete flow using a selection of benchmarks. Results show that using ARIANNA to customize the redaction fabrics yields up to 3.3x lower overheads and 4x higher eFPGA fabric utilization than a one-fits-all fabric as proposed in prior works.

cs.CR↗

arXiv2025

VeriLeaky: Navigating IP Protection vs Utility in Fine-Tuning for LLM-Driven Verilog Coding

Large language models (LLMs) offer significant potential for coding, yet fine-tuning (FT) with curated data is essential for niche languages like Verilog. Using proprietary intellectual property (IP) for FT presents a serious risk, as FT data can be leaked through LLM inference. This leads to a critical dilemma for design houses: seeking to build externally accessible LLMs offering competitive Verilog coding, how can they leverage in-house IP to enhance FT utility while ensuring IP protection? For the first time in the literature, we study this dilemma. Using LLaMA 3.1-8B, we conduct in-house FT on a baseline Verilog dataset (RTLCoder) supplemented with our own in-house IP, which is validated through multiple tape-outs. To rigorously assess IP leakage, we quantify structural similarity (AST/Dolos) and functional equivalence (Synopsys Formality) between generated codes and our in-house IP. We show that our IP can indeed be leaked, confirming the threat. As defense, we evaluate logic locking of Verilog codes (ASSURE). This offers some level of protection, yet reduces the IP's utility for FT and degrades the LLM's performance. Our study shows the need for novel strategies that are both effective and minimally disruptive to FT, an essential effort for enabling design houses to fully utilize their proprietary IP toward LLM-driven Verilog coding.

cs.CR↗

arXiv2025

VeriContaminated: Assessing LLM-Driven Verilog Coding for Data Contamination

Large Language Models (LLMs) have revolutionized code generation, achieving exceptional results on various established benchmarking frameworks. However, concerns about data contamination - where benchmark data inadvertently leaks into pre-training or fine-tuning datasets - raise questions about the validity of these evaluations. While this issue is known, limiting the industrial adoption of LLM-driven software engineering, hardware coding has received little to no attention regarding these risks. For the first time, we analyze state-of-the-art (SOTA) evaluation frameworks for Verilog code generation (VerilogEval and RTLLM), using established methods for contamination detection (CCD and Min-K% Prob). We cover SOTA commercial and open-source LLMs (CodeGen2.5, Minitron 4b, Mistral 7b, phi-4 mini, LLaMA-{1,2,3.1}, GPT-{2,3.5,4o}, Deepseek-Coder, and CodeQwen 1.5), in baseline and fine-tuned models (RTLCoder and Verigen). Our study confirms that data contamination is a critical concern. We explore mitigations and the resulting trade-offs for code quality vs fairness (i.e., reducing contamination toward unbiased benchmarking).

cs.AR↗

arXiv2024

RTL-Breaker: Assessing the Security of LLMs against Backdoor Attacks on HDL Code Generation

Large language models (LLMs) have demonstrated remarkable potential with code generation/completion tasks for hardware design. In fact, LLM-based hardware description language (HDL) code generation has enabled the industry to realize complex designs more quickly, reducing the time and effort required in the development cycle. However, the increased reliance on such automation introduces critical security risks. Notably, given that LLMs have to be trained on vast datasets of codes that are typically sourced from publicly available repositories (often without thorough validation), LLMs are susceptible to so-called data poisoning or backdoor attacks. Here, attackers inject malicious code for the training data, which can be carried over into the HDL code generated by LLMs. This threat vector can compromise the security and integrity of entire hardware systems. In this work, we propose RTL-Breaker, a novel backdoor attack framework on LLM-based HDL code generation. RTL-Breaker provides an in-depth analysis for essential aspects of this novel problem: 1) various trigger mechanisms versus their effectiveness for inserting malicious modifications, and 2) side-effects by backdoor attacks on code generation in general, i.e., impact on code quality. RTL-Breaker emphasizes the urgent need for more robust measures to safeguard against such attacks. Toward that end, we open-source our framework and all data.

cs.CR↗

arXiv2024

Masala-CHAI: A Large-Scale SPICE Netlist Dataset for Analog Circuits by Harnessing AI

Masala-CHAI is a fully automated framework leveraging large language models (LLMs) to generate Simulation Programs with Integrated Circuit Emphasis (SPICE) netlists. It addresses a long-standing challenge in circuit design automation: automating netlist generation for analog circuits. Automating this workflow could accelerate the creation of fine-tuned LLMs for analog circuit design and verification. In this work, we identify key challenges in automated netlist generation and evaluate multimodal capabilities of state-of-the-art LLMs, particularly GPT-4, in addressing them. We propose a three-step workflow to overcome existing limitations: labeling analog circuits, prompt tuning, and netlist verification. This approach enables end-to-end SPICE netlist generation from circuit schematic images, tackling the persistent challenge of accurate netlist generation. We utilize Masala-CHAI to collect a corpus of 7,500 schematics that span varying complexities in 10 textbooks and benchmark various open source and proprietary LLMs. Models fine-tuned on Masala-CHAI when used in LLM-agentic frameworks such as AnalogCoder achieve a notable 46% improvement in Pass@1 scores. We open-source our dataset and code for community-driven development.

cs.AR↗

arXiv2024

SENTAUR: Security EnhaNced Trojan Assessment Using LLMs Against Undesirable Revisions

A globally distributed IC supply chain brings risks due to untrusted third parties. The risks span inadvertent use of hardware Trojan (HT), inserted Intellectual Property (3P-IP) or Electronic Design Automation (EDA) flows. HT can introduce stealthy HT behavior, prevent an IC work as intended, or leak sensitive data via side channels. To counter HTs, rapidly examining HT scenarios is a key requirement. While Trust-Hub benchmarks are a good starting point to assess defenses, they encompass a small subset of manually created HTs within the expanse of HT designs. Further, the HTs may disappear during synthesis. We propose a large language model (LLM) framework SENTAUR to generate a suite of legitimate HTs for a Register Transfer Level (RTL) design by learning its specifications, descriptions, and natural language descriptions of HT effects. Existing tools and benchmarks are limited; they need a learning period to construct an ML model to mimic the threat model and are difficult to reproduce. SENTAUR can swiftly produce HT instances by leveraging LLMs without any learning period and sanitizing the HTs facilitating their rapid assessment. Evaluation of SENTAUR involved generating effective, synthesizable, and practical HTs from TrustHub and elsewhere, investigating impacts of payloads/triggers at the RTL. While our evaluation focused on HT insertion, SENTAUR can generalize to automatically transform an RTL code to have defined functional modifications.

cs.CR↗

arXiv2024

ASCENT: Amplifying Power Side-Channel Resilience via Learning & Monte-Carlo Tree Search

Power side-channel (PSC) analysis is pivotal for securing cryptographic hardware. Prior art focused on securing gate-level netlists obtained as-is from chip design automation, neglecting all the complexities and potential side-effects for security arising from the design automation process. That is, automation traditionally prioritizes power, performance, and area (PPA), sidelining security. We propose a "security-first" approach, refining the logic synthesis stage to enhance the overall resilience of PSC countermeasures. We introduce ASCENT, a learning-and-search-based framework that (i) drastically reduces the time for post-design PSC evaluation and (ii) explores the security-vs-PPA design space. Thus, ASCENT enables an efficient exploration of a large number of candidate netlists, leading to an improvement in PSC resilience compared to regular PPA-optimized netlists. ASCENT is up to 120x faster than traditional PSC analysis and yields a 3.11x improvement for PSC resilience of state-of-the-art PSC countermeasures

cs.CR↗

arXiv2024

LLM-Aided Testbench Generation and Bug Detection for Finite-State Machines

This work investigates the potential of tailoring Large Language Models (LLMs), specifically GPT3.5 and GPT4, for the domain of chip testing. A key aspect of chip design is functional testing, which relies on testbenches to evaluate the functionality and coverage of Register-Transfer Level (RTL) designs. We aim to enhance testbench generation by incorporating feedback from commercial-grade Electronic Design Automation (EDA) tools into LLMs. Through iterative feedback from these tools, we refine the testbenches to achieve improved test coverage. Our case studies present promising results, demonstrating that this approach can effectively enhance test coverage. By integrating EDA tool feedback, the generated testbenches become more accurate in identifying potential issues in the RTL design. Furthermore, we extended our study to use this enhanced test coverage framework for detecting bugs in the RTL implementations

cs.AR↗

arXiv2024

Lightweight Countermeasures Against Static Power Side-Channel Attacks

This paper presents a novel defense strategy against static power side-channel attacks (PSCAs), a critical threat to cryptographic security. Our method is based on (1) carefully tuning high-Vth versus low-Vth cell selection during synthesis, accounting for both security and timing impact, and (2), at runtime, randomly switching the operation between these cells. This approach serves to significantly obscure static power patterns, which are at the heart of static PSCAs. Our experimental results on a commercial 28nm node show a drastic increase in the effort required for a successful attack, namely up to 96 times more traces. When compared to prior countermeasures, ours incurs little cost, making it a lightweight defense.

cs.CR↗

arXiv2022

ALICE: An Automatic Design Flow for eFPGA Redaction

Fabricating an integrated circuit is becoming unaffordable for many semiconductor design houses. Outsourcing the fabrication to a third-party foundry requires methods to protect the intellectual property of the hardware designs. Designers can rely on embedded reconfigurable devices to completely hide the real functionality of selected design portions unless the configuration string (bitstream) is provided. However, selecting such portions and creating the corresponding reconfigurable fabrics are still open problems. We propose ALICE, a design flow that addresses the EDA challenges of this problem. ALICE partitions the RTL modules between one or more reconfigurable fabrics and the rest of the circuit, automating the generation of the corresponding redacted design.

cs.AR↗

arXiv2021

Not All Fabrics Are Created Equal: Exploring eFPGA Parameters For IP Redaction

Semiconductor design houses rely on third-party foundries to manufacture their integrated circuits (IC). While this trend allows them to tackle fabrication costs, it introduces security concerns as external (and potentially malicious) parties can access critical parts of the designs and steal or modify the Intellectual Property (IP). Embedded FPGA (eFPGA) redaction is a promising technique to protect critical IPs of an ASIC by \textit{redacting} (i.e., removing) critical parts and mapping them onto a custom reconfigurable fabric. Only trusted parties will receive the correct bitstream to restore the redacted functionality. While previous studies imply that using an eFPGA is a sufficient condition to provide security against IP threats like reverse-engineering, whether this truly holds for all eFPGA architectures is unclear, thus motivating the study in this paper. We examine the security of eFPGA fabrics generated by varying different FPGA design parameters. We characterize the power, performance, and area (PPA) characteristics and evaluate each fabric's resistance to SAT-based bitstream recovery. Our results encourage designers to work with custom eFPGA fabrics rather than off-the-shelf commercial FPGAs and reveals that only considering a redaction fabric's bitstream size is inadequate for gauging security.

cs.CR↗

arXiv2021

Exploring eFPGA-based Redaction for IP Protection

Recently, eFPGA-based redaction has been proposed as a promising solution for hiding parts of a digital design from untrusted entities, where legitimate end-users can restore functionality by loading the withheld bitstream after fabrication. However, when deciding which parts of a design to redact, there are a number of practical issues that designers need to consider, including area and timing overheads, as well as security factors. Adapting an open-source FPGA fabric generation flow, we perform a case study to explore the trade-offs when redacting different modules of open-source intellectual property blocks (IPs) and explore how different parts of an eFPGA contribute to the security. We provide new insights into the feasibility and challenges of using eFPGA-based redaction as a security solution.

cs.CR↗