arXiv subjects

Jiuyu Liu

Publications and source records attributed to Jiuyu Liu.

16 recordsLinked to original sources

arXiv2026

Phase-Rotated Symbol Spreading for Scalable Rydberg Atomic-MIMO Detection

Multiple-input multiple-output (MIMO) systems using Rydberg atomic (RA) receivers face significant scalability challenges in signal detection due to their nonlinear signal models. This letter proposes phase-rotated symbol spreading (PRSS), which transmits each symbol across two consecutive time slots with an optimal π/2 phase offset. PRSS enables reconstruction of an effective linear signal model while maintaining spectral efficiency and facilitating the use of conventional RF-MIMO detection algorithms. Simulation results demonstrate that PRSS achieves greater than 2.5 dB and 10 dB bit error rate improvements compared to current single-transmission methods when employing optimal exhaustive search and low-complexity sub-optimal detection methods, respectively.

cs.IT↗

arXiv2025

RIS-assisted Atomic MIMO Receiver

In this paper, we propose a novel and low-complexity atomic multiple-input multiple-output (MIMO) receiver architecture assisted by a reconfigurable intelligent surface (RIS). By introducing RIS and utilizing pulse amplitude modulation (PAM), the phase of the transmitted signal is effectively aligned with that of the local oscillator (LO), thereby mitigating phase ambiguity and substantially reducing both signal detection complexity and overall receiver complexity.To tackle the resulting non-convex optimization problem, we reformulate it into a tractable form by minimizing the Frobenius norm of an equivalent matrix, which is efficiently solved using an Adam-based gradient descent algorithm.

eess.SP↗

arXiv2025

LO-Aware Adaptive Modulation for Rydberg Atomic Receivers

Rydberg atomic (RA) receivers represent a revolutionary quantum technology for wireless communications, offering unprecedented sensitivity beyond conventional radio frequency (RF) antennas. However, these receivers detect only signal amplitude, losing critical phase information. While reference signals generated by a local oscillator (LO) can assist in phase recovery, existing modulation schemes designed for conventional systems perform poorly with this quantum detection mechanism. This paper introduces a breakthrough LO-aware adaptive modulation (LOAM) scheme specifically developed for RA receivers that dynamically adapts to complex fading channel coefficients. LOAM maximizes the minimum amplitude difference between constellation points, ensuring optimal detection performance. The innovation employs an adaptive co-linear constellation architecture aligned with the combined phase of reference signal and channel coefficient. For strong reference signals, LOAM generates symmetric constellation points centered at origin; for weak signals, it adopts non-symmetric distributions. The paper mathematically derives the threshold governing these operational regimes. Simulation results reveal the transformative impact of LOAM, demonstrating performance gains exceeding 45 dB over conventional modulation schemes, including quadrature amplitude modulation (QAM), phase-shift keying (PSK), and pulse-amplitude modulation (PAM).

cs.IT↗

arXiv2025

Cluster-Aware Two-Stage Method for Fast Iterative MIMO Detection in LEO Satellite Communications

In this paper, a cluster-aware two-stage multiple-input multiple-output (MIMO) detection method is proposed for direct-to-cell satellite communications. The method achieves computational efficiency by exploiting a distinctive property of satellite MIMO channels: users within the same geographical cluster exhibit highly correlated channel characteristics due to their physical proximity, which typically impedes convergence in conventional iterative MIMO detectors. The proposed method implements a two-stage strategy that first eliminates intra-cluster interference using computationally efficient small matrix inversions, then utilizes these pre-computed matrices to accelerate standard iterative MIMO detectors such as Gauss-Seidel (GS) and symmetric successive over-relaxation (SSOR) for effective inter-cluster interference cancellation. Computer simulations demonstrate that the proposed method achieves more than 12 times faster convergence under perfect channel state information. Even when accounting for channel estimation errors, the method maintains 9 times faster convergence, demonstrating its robustness and effectiveness for next-generation satellite MIMO communications.

cs.IT↗

arXiv2025

SA-MIMO: Scalable Quantum-Based Wireless Communications

Rydberg atomic receivers offer a quantum-native alternative to conventional RF front-ends by directly detecting electromagnetic fields via highly excited atomic states. While their quantum-limited sensitivity and hardware simplicity make them promising for future wireless systems, extending their use to scalable multi-antenna and multi-carrier configurations, termed Scalable Atomic-MIMO (SA-MIMO), remains largely unexplored. This paper introduces a novel RF transmitter-atomic receiver architecture that addresses this gap. The core idea lies in a novel modulation technique called Phase-Rotated Symbol Spreading (PRSS), which transforms the nonlinear phase retrieval problem inherent to atomic detection into a tractable linear demultiplexing task. PRSS enables efficient signal processing and supports scalable MUX/DeMUX operations in both atomic MIMO and atomic OFDM systems. Simulation results show that the proposed system achieves up to 2.5 dB gain under optimal maximum-likelihood detection and over 10 dB under suboptimal detection in MIMO settings. These results establish PRSS assisted SA-MIMO as a promising architecture for realizing high-sensitivity, interference-resilient atomic wireless communication.

cs.IT↗

arXiv2025

ELAA-ISAC: Environmental Mapping Utilizing the LoS State of Communication Channel

In this paper, a novel environmental mapping method is proposed to outline the indoor layout utilizing the line-of-sight (LoS) state information of extremely large aperture array (ELAA) channels. It leverages the spatial resolution provided by ELAA and the mobile terminal (MT)'s mobility to infer the presence and location of obstacles in the environment. The LoS state estimation is formulated as a binary hypothesis testing problem, and the optimal decision rule is derived based on the likelihood ratio test. Subsequently, the theoretical error probability of LoS estimation is derived, showing close alignment with simulation results. Then, an environmental mapping method is proposed, which progressively outlines the layout by combining LoS state information from multiple MT locations. It is demonstrated that the proposed method can accurately outline the environment layout, with the mapping accuracy improving as the number of service-antennas and MT locations increases. This paper also investigates the impact of channel estimation error and non-LoS (NLoS) components on the quality of environmental mapping. The proposed method exhibits particularly promising performance in LoS dominated wireless environments characterized by high Rician K-factor. Specifically, it achieves an average intersection over union (IoU) exceeding 80% when utilizing 256 service antennas and 18 MT locations.

cs.IT↗

arXiv2024

Fast Iterative ELAA-MIMO Detection Exploiting Static Channel Components

Extremely large aperture array (ELAA) is a promising multiple-input multiple-output (MIMO) technique for next generation mobile networks. In this paper, we propose two novel approaches to accelerate the convergence of current iterative MIMO detectors in ELAA channels. Our approaches exploit the static components of the ELAA channel, which include line of sight (LoS) paths and deterministic non-LoS (NLoS) components due to channel hardening effects. This paper proposes novel convergence acceleration techniques for fast iterative ELAA-MIMO detection by leveraging the static channel component, including the LoS paths and deterministic NLoS components that arise due to channel hardening. Specifically, these static channel components are utilized in two ways: as preconditioning matrices for general iterative algorithms, and as initialization for quasi-Newton (QN) methods. Simulation results show that the proposed approaches converge significantly faster compared to current iterative MIMO detectors, especially under strong LoS conditions with high Rician K-factor. Furthermore, QN methods with the proposed initialization matrix consistently achieve the best convergence performance while maintaining low complexity.

cs.IT↗

arXiv2024

Accelerating Iteratively Linear Detectors in Multi-User (ELAA-)MIMO Systems with UW-SVD

Current iterative multiple-input multiple-output (MIMO) detectors suffer from slow convergence when the wireless channel is ill-conditioned. The ill-conditioning is mainly caused by spatial correlation between channel columns corresponding to the same user equipment, known as intra-user interference. In addition, in the emerging MIMO systems using an extremely large aperture array (ELAA), spatial non-stationarity can make the channel even more ill-conditioned. In this paper, user-wise singular value decomposition (UW-SVD) is proposed to accelerate the convergence of iterative MIMO detectors. Its basic principle is to perform SVD on each user's sub-channel matrix to eliminate intra-user interference. Then, the MIMO signal model is effectively transformed into an equivalent signal (e-signal) model, comprising an e-channel matrix and an e-signal vector. Existing iterative algorithms can be used to recover the e-signal vector, which undergoes post-processing to obtain the signal vector. It is proven that the e-channel matrix is better conditioned than the original MIMO channel for spatially correlated (ELAA-)MIMO channels. This implies that UW-SVD can accelerate current iterative algorithms, which is confirmed by our simulation results. Specifically, it can speed up convergence by up to 10 times in both uncoded and coded systems.

cs.IT↗

arXiv2024

Wi-Fi Beyond Communications: Experimental Evaluation of Respiration Monitoring and Motion Detection Using COTS Devices

Wi-Fi sensing has become an attractive option for non-invasive monitoring of human activities and vital signs. This paper explores the feasibility of using state-of-the-art commercial off-the-shelf (COTS) devices for Wi-Fi sensing applications, particularly respiration monitoring and motion detection. We utilize the Intel AX210 network interface card (NIC) to transmit Wi-Fi signals in both 2.4 GHz and 6 GHz frequency bands. Our experiments rely on channel frequency response (CFR) and received signal strength indicator (RSSI) data, which are processed using a moving average algorithm to extract human behavior patterns. The experimental results demonstrate the effectiveness of our approach in capturing and representing human respiration and motion patterns. Furthermore, we compare the performance of Wi-Fi sensing across different frequency bands, highlighting the advantages of using higher frequencies for improved sensitivity and clarity. Our findings showcase the practicality of using COTS devices for Wi-Fi sensing and lay the groundwork for the development of non-invasive, contactless sensing systems. These systems have potential applications in various fields, including healthcare, smart homes, and Metaverse.

cs.IT↗

arXiv2024

Near and Far Field Model Mismatch: Implications on 6G Communications, Localization, and Sensing

The upcoming 6G technology is expected to operate in near-field (NF) radiating conditions thanks to high-frequency and electrically large antenna arrays. Although several studies have already addressed this possibility, it is worth noting that NF models introduce higher complexity, the justification for which is not always evident in terms of performance improvements. This article investigates the implications of the mismatch between NF and far-field (FF) models concerning communication, localization, and sensing systems. Such disparity can lead to a degradation of performance metrics such as sensing and localization accuracy and communication efficiency. By exploring the effects of mismatches between NF and FF models, this study seeks to revolve around the challenges faced by system designers, offering insights about the balance between model accuracy and achievable performance. Finally, we conduct a numerical performance analysis to verify the impact of the mismatch between NF and FF models.

eess.SP↗

arXiv2024

Near-Field Fading Channel Modeling for ELAAs: From Communication to ISAC

Extremely large aperture array (ELAA) is anticipated to serve as a pivotal feature of future multiple-input multiple-output (MIMO) systems in 6G. Near-field (NF) fading channel models are essential for reliable link-level simulation and ELAA system design. In this article, we propose a framework designed to generate NF fading channels for both communication and integrated sensing and communication (ISAC) applications. The framework allows a mixed of line of sight (LoS) and non-LoS (NLoS) links. It also considers spherical wave model and spatially non-stationary shadow fading. Based on this framework, we propose a three-dimensional (3D) fading channel model for ELAA systems deployed with a uniform rectangular array (URA). It can capture the impact of sensing object for ISAC applications. Moreover, all parameters involved in the framework are based on specifications or measurements from the 3rd Generation Partnership Project (3GPP) documents. Therefore, the proposed framework and channel model have the potential to contribute to the standard in various aspects, including ISAC, extra-large (XL-) MIMO, and reconfigurable intelligent surface (RIS) aided MIMO systems. Finally, future directions for ELAA are presented, including not only NF channel modeling but also the design of next-generation transceivers.

cs.IT↗

arXiv2023

Leveraging User-Wise SVD for Accelerated Convergence in Iterative ELAA-MIMO Detections

Numerous low-complexity iterative algorithms have been proposed to offer the performance of linear multiple-input multiple-output (MIMO) detectors bypassing the channel matrix inverse. These algorithms exhibit fast convergence in well-conditioned MIMO channels. However, in the emerging MIMO paradigm utilizing extremely large aperture arrays (ELAA), the wireless channel may become ill-conditioned because of spatial non-stationarity, which results in a considerably slower convergence rate for these algorithms. In this paper, we propose a novel ELAA-MIMO detection scheme that leverages user-wise singular value decomposition (UW-SVD) to accelerate the convergence of these iterative algorithms. By applying UW-SVD, the MIMO signal model can be converted into an equivalent form featuring a better-conditioned transfer function. Then, existing iterative algorithms can be utilized to recover the transmitted signal from the converted signal model with accelerated convergence towards zero-forcing performance. Our simulation results indicate that proposed UW-SVD scheme can significantly accelerate the convergence of the iterative algorithms in spatially non-stationary ELAA channels. Moreover, the computational complexity of the UW-SVD is comparatively minor in relation to the inherent complexity of the iterative algorithms.

cs.IT↗

arXiv2023

A Spatially Non-stationary Fading Channel Model for Simulation and (Semi-) Analytical Study of ELAA-MIMO

In this paper, a novel spatially non-stationary fading channel model is proposed for multiple-input multiple-output (MIMO) system with extremely-large aperture service-array (ELAA). The proposed model incorporates three key factors which cause the channel spatial non-stationarity: 1) link-wise path-loss; 2) shadowing effect; 3) line-of-sight (LoS)/non-LoS state. With appropriate parameter configurations, the proposed model can be used to generate computer-simulated channel data that matches the published measurement data from practical ELAA-MIMO channels. Given such appealing results, the proposed fading channel model is employed to study the cumulative distribution function (CDF) of ELAA-MIMO channel capacity. For all of our studied scenarios, it is unveiled that the ELAA-MIMO channel capacity obeys the skew-normal distribution. Moreover, the channel capacity is also found close to the Gaussian or Weibull distribution, depending on users' geo-location and distribution. More specifically, for single-user equivalent scenarios or multiuser scenarios with short user-to-ELAA distances (e.g., 1 m), the channel capacity is close to the Gaussian distribution; and for others, it is close to the Weibull distribution. Finally, the proposed channel model is also employed to study the impact of channel spatial non-stationarity on linear MIMO receivers through computer simulations. The proposed fading channel model is available at https://github.com/ELAA-MIMO/non-stationary-fading-channel-model.

cs.IT↗

arXiv2023

Alternative Normalized-Preconditioning for Scalable Iterative Large-MIMO Detection

Signal detection in large multiple-input multiple-output (large-MIMO) systems presents greater challenges compared to conventional massive-MIMO for two primary reasons. First, large-MIMO systems lack favorable propagation conditions as they do not require a substantially greater number of service antennas relative to user antennas. Second, the wireless channel may exhibit spatial non-stationarity when an extremely large aperture array (ELAA) is deployed in a large-MIMO system. In this paper, we propose a scalable iterative large-MIMO detector named ANPID, which simultaneously delivers 1) close to maximum-likelihood detection performance, 2) low computational-complexity (i.e., square-order of transmit antennas), 3) fast convergence, and 4) robustness to the spatial non-stationarity in ELAA channels. ANPID incorporates a damping demodulation step into stationary iterative (SI) methods and alternates between two distinct demodulated SI methods. Simulation results demonstrate that ANPID fulfills all the four features concurrently and outperforms existing low-complexity MIMO detectors, especially in highly-loaded large MIMO systems.

cs.IT↗

arXiv2023

Achieving Maximum-likelihood Detection Performance with Square-order Complexity in Large Quasi-Symmetric MIMO Systems

We focus on the signal detection for large quasi-symmetric (LQS) multiple-input multiple-output (MIMO) systems, where the numbers of both service (M) and user (N) antennas are large and N/M tends to 1. It is challenging to achieve maximum-likelihood detection (MLD) performance with square-order complexity due to the ill-conditioned channel matrix. In the emerging MIMO paradigm termed with an extremely large aperture array, the channel matrix can be more ill-conditioned due to spatial non-stationarity. In this paper, projected-Jacobi (PJ) is proposed for signal detection in (non-) stationary LQS-MIMO systems. It is theoretically and empirically demonstrated that PJ can achieve MLD performance, even when N/M = 1. Moreover, PJ has square-order complexity of N and supports parallel computation. The main idea of PJ is to add a projection step and to set a (quasi-) orthogonal initialization for the classical Jacobi iteration. Moreover, the symbol error rate (SER) of PJ is mathematically derived and it is tight to the simulation results.

cs.IT↗

arXiv2021

A Non-Stationary Channel Model with Correlated NLoS/LoS States for ELAA-mMIMO

In this paper, a novel spatially non-stationary channel model is proposed for link-level computer simulations of massive multiple-input multiple-output (mMIMO) with extremely large aperture array (ELAA). The proposed channel model allows a mix of non-line-of-sight (NLoS) and LoS links between a user and service antennas. The NLoS/LoS state of each link is characterized by a binary random variable, which obeys a correlated Bernoulli distribution. The correlation is described in the form of an exponentially decaying window. In addition, the proposed model incorporates shadowing effects which are non-identical for NLoS and LoS states. It is demonstrated, through computer emulation, that the proposed model can capture almost all spatially non-stationary fading behaviors of the ELAA-mMIMO channel. Moreover, it has a low implementational complexity. With the proposed channel model, Monte-Carlo simulations are carried out to evaluate the channel capacity of ELAA-mMIMO. It is shown that the ELAA-mMIMO channel capacity has considerably different stochastic characteristics from the conventional mMIMO due to the presence of channel spatial non-stationarity.

cs.IT↗