Searcharxiv⌕ Search

arXiv subjects

João P. C. Moura

Publications and source records attributed to João P. C. Moura.

2 recordsLinked to original sources

Fe3O4 Nano-octahedra/Vulcan XC72: Optimization and Combination with Solar-Based Electro-Fenton for Progestins Degradation

The widespread presence of synthetic progestins, such as levonorgestrel (LNG) and gestodene (GES), in aquatic environments poses significant ecotoxicological risks due to their endocrine-disrupting properties. In this study, nano-octahedral magnetite (Fe3O4-NO) was synthesized via a hydrothermal route and incorporated into gas diffusion electrodes (GDEs) supported on Vulcan XC72 to enhance the in-situ electrogeneration of hydrogen peroxide (H2O2). High-resolution transmission electron microscopy, X-ray diffraction, SEM, X-ray photoelectron spectroscopy, and contact angle measurements thoroughly characterized the physicochemical and morphological properties of the materials. The 3% Fe3O4-NO/C catalyst provided a two-fold increase in H2O2 selectivity compared with Vulcan XC72. Electrochemical performance was optimized using a 2^3 factorial design and principal component analysis (PCA), with current density, pH, and Na2SO4 concentration as variables. The optimized GDE (3% Fe3O4-NO/C) achieved a maximum H2O2 production of 0.44 +/- 0.02 g L-1 with a current efficiency of 43.1 +/- 0.23% and a specific energy consumption of 0.012 +/- 0.009 kWh g-1. The electrode was further applied to the degradation of LNG and GES using solar and anodic-assisted electro-Fenton processes. Under optimal conditions, over 70% removal of both progestins was achieved, with stable performance across three operational cycles. These findings demonstrate the potential of 3% Fe3O4-NO/C-GDEs as efficient, reusable cathodes for sustainable electrochemical advanced oxidation processes (EAOPs) in water treatment.

physics.chem-ph↗

Degradation of methylparaben by anodic oxidation, electro-Fenton, and photoelectro-Fenton using carbon felt-BDD cell

In this study, the comparative efficiency of different electrochemical advanced oxidation processes, such as anodic oxidation with electrogenerated H2O2 (AO- H2O2), electro-Fenton (EF), and its combination with UV irradiation (photoelectron-Fenton (PEF)), was investigated for the removal of methylparaben (MP) using a carbon felt cathode and a boron-doped diamond anode. The EF process achieved a higher MP removal efficiency than the AO-H2O2 process for all applied current densities. The total organic carbon (TOC) removal after 6 h of treatment at a current density of 10 mA cm-2 reached 75.0% and 91.9% for the AO- H2O2 and EF processes, respectively. The combination of EF and UV light improved the efficiency of the EF process. The PEF process achieved a TOC removal of 84.6% in only 2 h at 5 mA cm-2 and 96.8% after 6 h of treatment. Furthermore, based on identifying oxidation reaction intermediates and short-chain carboxylic acids generated during the treatment, a reaction pathway for methylparaben mineralization by hydroxyl radicals was proposed.

physics.chem-ph↗