arXiv subjects

Joel K. W. Yang

Publications and source records attributed to Joel K. W. Yang.

At least 37 records · Page 2Linked to original sources

arXiv2022

Overcoming Van der Waals Forces in reconfigurable nanostructures

Reconfigurable metamaterials require constituent nanostructures to demonstrate switching of shapes with external stimuli. For generality, such nanostructures would touch and stick to other surfaces in one of its configurations. Yet, a longstanding challenge is in overcoming this stiction caused by Van der Waals forces, which impedes shape recovery. Here, we introduce a stiff yet self-recovering material system based on acrylic acid, and tested it in high-aspect ratio structures, where recovery is weak. This designer material has a storage modulus of ~5.2 GPa at room temperature and ~90 MPa in the rubbery state at 150 Celsius, an order of magnitude higher than previous reports. A high-resolution resin for two-photon lithography was developed based on this polymer system, enabling 3D printing of nanopillars with diameters of ~400 nm and aspect ratio as high as ~10. Experimentally, we observed self-recovery as collapsed and touching structures overcome stiction to stand back up. We developed a theoretical model to explain the recoverability of these sub-micron structures. Reconfigurable structural colour prints and holograms were demonstrated, indicating potential applications of the material system as a shape memory polymer suitable for sub-micron reconfigurable metamaterials.

physics.app-ph↗

arXiv2022

Reconfiguring colours of single relief structures by directional stretching

Colour changes can be achieved by straining photonic crystals or gratings embedded in stretchable materials. However, the multiple repeat units and the need for a volumetric assembly of nanostructures limit the density of information content. Inspired by surface reliefs on oracle bones and music records as means of information archival, here we endow surface-relief elastomers with multiple sets of information that are accessible by mechanical straining along in-plane axes. Distinct from Bragg diffraction effects from periodic structures, we report trenches that generate colour due to variations in trench depth, enabling individual trench segments to support a single colour. Using 3D printed cuboids, we replicated trenches of varying geometric parameters in elastomers. These parameters determine the initial colour (or lack thereof), the response to capillary forces, and the appearance when strained along or across the trenches. Strain induces modulation in trench depth or the opening and closure of a trench, resulting in surface reliefs with up to six distinct states, and an initially featureless surface that reveals two distinct images when stretched along different axes. The highly reversible structural colours are promising in optical data archival, anti-counterfeiting, and strain-sensing applications.

physics.optics↗

arXiv2022

High-order Photonic Cavity Modes Enabled 3D Structural Color

It remains a challenge to directly print three-dimensional arbitrary shapes that exhibit structural colors at the micrometer scale. Woodpile photonic crystals (WPCs) fabricated via two-photon lithography (TPL) are promising as building blocks to produce 3D geometries that generate structural colors due to their ability to exhibit either omnidirectional or anisotropic photonic stopbands. However, existing approaches have focused on achieving structural colors when illuminating WPCs from the top, which necessitates print resolutions beyond the limit of commercial TPL and/or post-processing techniques. Here, we devised a new strategy to support high-order photonic cavity modes upon side-illumination on WPCs that surprisingly generate large reflectance peaks in the visible spectrum. Based on that, we demonstrate one-step printing of 3D photonic structural colors without requiring post-processing or subwavelength features. Vivid colors with reflectance peaks exhibiting a full width at half maximum of ~25 nm, a maximum reflectance of 50%, gamut of ~85% of sRGB, and large viewing angles, were achieved. In addition, we also demonstrated voxel-level manipulation and control of colors in arbitrary-shaped 3D objects constituted with WPCs as unit cells, which has great potential for applications in dynamic color displays, colorimetric sensing, anti-counterfeiting, and light-matter interaction platforms.

physics.optics↗

arXiv2021

A Modular Design of Continuously Tunable Full Color Plasmonic Pixels with Broken Rotational Symmetry

Color tuning is a fascinating and indispensable property in applications such as advanced display, active camouflaging and information encryption. Thus far, a variety of reconfigurable approaches have been implemented to achieve color change. However, it is still a challenge to enable a continuous color tuning over the entire hue range in a simple, stable and rapid manner without changes in configuration and material properties. Here, we demonstrate an all-optical continuously tunable plasmonic pixel scheme via a modular design approach to realize polarization-controlled full color tuning by breaking the intrinsic symmetry of the unit cell layout. The polarization-controlled full color tunable plasmonic pixels consist of three different types of color modules oriented at an angle of 60° with respect to each other, corresponding to three subtractive primary colors. Without changing the structural properties or surrounding environment, the structural colors can be continuously and precisely tuned across all hues by illuminating linearly polarized light with different polarization directions. Meanwhile, the plasmonic pixels can be flexibly customized for various color tuning processes, such as different initial output colors and color tuning sequences, through the appropriate choice of component modules and the elaborate design of module layouts. Furthermore, we extend the color tuning to achromatic colors, white or black, with the utilization of a single module or the introduction of a black module. The proposed polarization-controlled full color tunable plasmonic pixels hold considerable potential to function as next-generation color pixels integrated with liquid-crystal polarizers.

physics.optics↗

arXiv2021

Tunable Mie Resonances in the Visible Spectrum

Dielectric optical nanoantennas play an important role in color displays, metasurface holograms, and wavefront shaping applications. They usually exploit Mie resonances as supported on nanostructures with high refractive index, such as Si and TiO2. However, these resonances normally cannot be tuned. Although phase change materials, such as the germanium-antimony-tellurium alloys and post transition metal oxides, such as ITO, have been used to tune optical antennas in the near infrared spectrum, tunable dielectric antennae in the visible spectrum remain to be demonstrated. In this paper, we designed and experimentally demonstrated tunable dielectric nanoantenna arrays with Mie resonances in the visible spectrum, exploiting phase transitions in wide-bandgap Sb2S3 nano-resonators. In the amorphous state, Mie resonances in these Sb2S3 nanostructures give rise to a strong structural color in reflection mode. Thermal annealing induced crystallization and laser induced amorphization of the Sb2S3 resonators allow the color to be tuned reversibly. We believe these tunable Sb2S3 nanoantennae arrays will enable a wide variety of tunable nanophotonic applications, such as high-resolution color displays, holographic displays, and miniature LiDAR systems.

physics.optics↗

arXiv2021

Schrodinger's Red Pixel by Quasi Bound-State-In-Continuum

While structural colors are ubiquitous in nature, saturated reds are mysteriously absent. Hence, a longstanding problem is in fabricating nanostructured surfaces that exhibit reflectance approaching the theoretical limit. This limit is termed the Schrodinger red and demands sharp spectral transitions from "stopband" to a high reflectance "passband" with total suppression of higher-order resonances at blue and green wavelengths. Current approaches based on metallic or dielectric nanoantennas are insufficient to simultaneously meet these conditions. Here, for the 1st time, we designed and fabricated tall Si nanoantenna arrays on quartz substrate to support two partially overlapping y polarized quasi bound-state-in-the-continuum (q-BIC) modes in the red wavelengths with sharp spectral edges. These structures produce possibly the most saturated and brightest reds with ~80% reflectance, exceeding the red vertex in sRGB and even the cadmium red pigment. We employed a gradient descent algorithm with structures supporting q BIC as the starting point. Although the current design is polarization dependent, the proposed paradigm has enabled us to achieve the elusive structural red and the design principle could be generalized to Schrodinger's pixels of other colors. The design is suitable for scale up using other nanofabrication techniques for larger area applications, such as red pixels in displays, decorative coatings, and miniaturized spectrometers with high wavelength selectivity.

physics.optics↗

arXiv2021

Photonic Bound-States-in-the-Continuum Observed with an Electron Nanoprobe

Bound-states-in-the-continuum (BIC)is a wave-mechanical concept that generates resonances with vanishing spectral linewidths. It has many practical applications in Optics, such as narrow-band filters, mirror-less lasing, and nonlinear harmonic generation. As true BIC optical modes non-radiative and confined to the near field of nanostructures, they cannot be excited using propagating light. As a result, their direct experimental observation has been elusive. Rather than using light, we demonstrate probing BIC modes on arrays of silicon nanoantennas using a focused beam of electrons in a tranmission electron microscope. By combining cathodoluminescence (CL) and monochromated electron energy-loss spectroscopy (EELS) with controlled nanofabrication, we provide direct experimental evidence of "true" BIC modes, and demonstrate a BIC mode in the visible spectrum at 720 nm. The ability to observe and quantify these guided resonances with a spatial precision more than two orders of magnitude higher than previous far-field measurements allows the probing of individual elements in the nano-antenna arrays. The high-resolution experimental results are supported by numerical simulations as well as multipolar decomposition analysis, allowing us to demonstrate that the coherent interaction length of the quasi-BIC resonance requires at least 6 neighboring antenna elements, achieving over 60 times higher emissivity than for unpatterned silicon.

physics.optics↗

arXiv2021

High-resolution light field prints by nanoscale 3D printing

A light field print (LFP) displays three-dimensional (3D) information to the naked-eye observer under ambient white light illumination. Changing perspectives of a 3D image are seen by the observer from varying angles. However, LFPs appear pixelated due to limited resolution and misalignment between their lenses and colour pixels. A promising solution to create high-resolution LFPs is through the use of advanced nanofabrication techniques. Here, we use two-photon polymerization lithography as a one-step nanoscale 3D printer to directly fabricate LFPs out of transparent resin. This approach produces simultaneously high spatial resolution (29 - 45 μm) and high angular resolution (~ 1.6 °) images with smooth motion parallax across 15 {\times} 15 views. Notably, the smallest colour pixel consists of only a single nanopillar (~ 300 nm diameter). Our LFP signifies a step towards hyper-realistic 3D images that can be applied in print media and security tags for high-value goods.

physics.optics↗

arXiv2020

Painting with Hue, Saturation, and Brightness Control by Nanoscale 3D Printing

Varying only the in-plane or out-of-plane dimensions of nanostructures produces a wide range of colourful elements in metasurfaces and thin films. However, achieving shades of grey and control of colour saturation remains challenging. Here, we introduce a hybrid approach to colour generation based on the tuning of nanostructure geometry in all three dimensions. Through two-photon polymerization lithography, we systematically investigated colour generation from the simple single nanopillar geometry made of low-refractive-index material; realizing grayscale and full colour palettes with control of hue, saturation, brightness through tuning of height, diameter, and periodicity of nanopillars. Arbitrary colourful and grayscale images were painted by mapping desired prints to precisely controllable parameters during 3D printing. We extend our understanding of the scattering properties of the low-refractive-index nanopillar to demonstrate grayscale inversion and colour desaturation, with steganography at the level of single nanopillars.

physics.optics↗

arXiv2020

Fabrication Development of a Large Area Grating for Out of Plane Beam Coupling

We develop a single-layer waveguide surface grating structure to vertically couple near infrared (NIR) light at ~1.55 um wavelength from a large area (~100 um length scale) Si waveguide on a Silicon-On-Insulator (SOI) substrates to free-space for high-power laser applications. Our design approach is based on the optimization of local emission angles and the out-coupling intensities. Simulation results show that a focal spot with a 1/e2 width of 3.82 um can be achieved at the desired focal position, with 33% (-4.81 dB) simulated source to free-space focusing efficiency, while initial measurements show an efficiency of 22% (-6.58 dB).

physics.optics↗

arXiv2020

Structural Multi-Colour Invisible Inks with Submicron 4D Printing of Shape Memory Polymers

Four-dimensional (4D) printing of shape memory polymer (SMP) imparts time responsive properties to 3D structures. Here, we explore 4D printing of a SMP in the submicron length scale, extending its applications to nanophononics. We report a new SMP photoresist based on Vero Clear achieving print features at a resolution of ~300 nm half pitch using two-photon polymerization lithography (TPL). Prints consisting of grids with size-tunable multi-colours enabled the study of shape memory effects to achieve large visual shifts through nanoscale structure deformation. As the nanostructures are flattened, the colours and printed information become invisible. Remarkably, the shape memory effect recovers the original surface morphology of the nanostructures along with its structural colour within seconds of heating above its glass transition temperature. The high-resolution printing and excellent reversibility in both microtopography and optical properties promises a platform for temperature-sensitive labels, information hiding for anti-counterfeiting, and tunable photonic devices.

physics.app-ph↗

arXiv2019

Structural Color 3D Printing By Shrinking Photonic Crystals

The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on two-photon polymerization are incapable of patterning photonic crystal structures with the requisite ~300 nm lattice constant to achieve photonic stopbands/ bandgaps in the visible spectrum and generate colors. Here, we introduce a means to produce 3D-printed photonic crystals with a 5x reduction in lattice constants (periodicity as small as 280 nm), achieving sub-100-nm features with a full range of colors. The reliability of this process enables us to engineer the bandstructures of woodpile photonic crystals that match experiments, showing that observed colors can be attributed to either slow light modes or stopbands. With these lattice structures as 3D color volumetric elements (voxels), we printed 3D microscopic scale objects, including the first multi-color microscopic model of the Eiffel Tower measuring only 39-microns tall with a color pixel size of 1.45 microns. The technology to print 3D structures in color at the microscopic scale promises the direct patterning and integration of spectrally selective devices, such as photonic crystal-based color filters, onto free-form optical elements and curved surfaces.

physics.optics↗

arXiv2018

Wide band gap phase change material tuned visible photonics

Light strongly interacts with structures that are of a similar scale to its wavelength; typically nanoscale features for light in the visible spectrum. However, the optical response of these nanostructures is usually fixed during the fabrication. Phase change materials offer a way to tune the properties of these structures in nanoseconds. Until now, phase change active photonics use materials that strongly absorb visible light, which limits their application in the visible spectrum. In contrast, Stibnite (Sb2S3) is an under-explored phase change material with a band gap that can be tuned in the visible spectrum from 2.0 to 1.7 eV. We deliberately couple this tuneable band gap to an optical resonator such that it responds dramatically in the visible spectrum to Sb2S3 reversible structural phase transitions. We show that this optical response can be triggered both optically and electrically. High speed reprogrammable Sb2S3 based photonic devices, such as those reported here, are likely to have wide applications in future intelligent photonic systems, holographic displays, and micro-spectrometers.

physics.optics↗

arXiv2018

Holographic Colour Prints: Enhanced Optical Security by Combined Phase and Amplitude Control

We created a novel optical security device that integrates multiple computer-generated holograms within a single colour image. Under white light, this "holographic colour print" appears as a colour image, whereas illumination with a red, green, or blue beam from a handheld laser pointer projects up to three different holograms onto a distant screen. In our design, all dielectric layered pixels comprising phase plates (phase control) and structural colour filters (amplitude control) are tiled to form a monolithic print, wherein pixel-level control over the phase and amplitude of light allows us to simultaneously achieve hologram multiplexing and colour image formation. The entire print is fabricated in a single lithographic process using a femtosecond 3D direct laser writer. As the phase and amplitude information is encoded in the surface relief of the structures, our prints can be manufactured using nanoimprint lithography and could find applications in document security.

physics.optics↗

arXiv2008

Electrothermal feedback in superconducting nanowire single-photon detectors

We investigate the role of electrothermal feedback in the operation of superconducting nanowire single-photon detectors (SNSPDs). It is found that the desired mode of operation for SNSPDs is only achieved if this feedback is unstable, which happens naturally through the slow electrical response associated with their relatively large kinetic inductance. If this response is sped up in an effort to increase the device count rate, the electrothermal feedback becomes stable and results in an effect known as latching, where the device is locked in a resistive state and can no longer detect photons. We present a set of experiments which elucidate this effect, and a simple model which quantitatively explains the results.

cond-mat.supr-con↗

arXiv2008

Optical Properties of Superconducting Nanowire Single-Photon Detectors

We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires that were five times more sensitive to parallel-polarized photons than perpendicular-polarized photons. We developed a numerical model that predicts the absorptance of our structures. We also used our measurements, coupled with measurements of device detection efficiencies, to determine the probability of photon detection after an absorption event. We found that, remarkably, absorbed parallel-polarized photons were more likely to result in detection events than perpendicular-polarized photons, and we present a hypothesis that qualitatively explains this result. Finally, we also determined the enhancement of device detection efficiency and absorptance due to the inclusion of an integrated optical cavity over a range of wavelengths (700-1700 nm) on a number of devices, and found good agreement with our numerical model.

physics.optics↗

arXiv2008

Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors

A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterize the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon-counting and quantum communication applications. The design, fabrication and testing of this detector are described, and a comparison between the measured and theoretical performance is presented.

physics.ins-det↗

arXiv2007

Constriction-limited detection efficiency of superconducting nanowire single-photon detectors

We investigate the source of large variations in the observed detection effiiencies of superconducting nanowire single-photon detectors between many nominally identical devices. Through both electrical and optical measurements, we infer that these variations arise from "constrictions:" highly localized regions of the nanowires where the effective cross-sectional area for superconducting current is reduced. These constrictions limit the DC bias current density to well below its critical value over the remainder of the wire, and thus prevent the detection efficiency from reaching the high values that occur in these devices only when they are biased near the critical current density.

physics.ins-det↗