arXiv subjects

Joel W. Ager

Publications and source records attributed to Joel W. Ager.

11 recordsLinked to original sources

arXiv2023

Elucidating the Mechanism of Large Phosphate Molecule Intercalation Through Graphene Heterointerfaces

Intercalation is a process of inserting chemical species into the heterointerfaces of two-dimensional (2D) layered materials. While much research has focused on intercalating metals and small gas molecules into graphene, the intercalation of larger molecules through the basal plane of graphene remains highly unexplored. In this work, we present a new mechanism for intercalating large molecules through monolayer graphene to form confined oxide materials at the graphene-substrate heterointerface. We investigate the intercalation of phosphorus pentoxide (P2O5) molecules directly from the vapor phase and confirm the formation of confined P2O5 at the graphene heterointerface using various techniques. Density functional theory (DFT) corroborate the experimental results and reveal the intercalation mechanism, whereby P2O5 dissociates into small fragments catalyzed by defects in the graphene that then permeates through lattice defects and reacts at the heterointerface to form P2O5. This process can also be used to form new confined metal phosphates (e.g., 2D InPO4). While the focus of this study is on P2O5 intercalation, the possibility of intercalation from pre-dissociated molecules catalyzed by defects in graphene may exist for other types of molecules as well. This study is a significant milestone in advancing our understanding of intercalation routes of large molecules via the basal plane of graphene, as well as heterointerface chemical reactions leading to the formation of distinctive confined complex oxide compounds.

cond-mat.mtrl-sci↗

arXiv2022

Towards an accelerated decarbonization of chemical industry by electrolysis

The transition towards carbon-neutral chemical production is challenging due to the fundamental reliance of the chemical sector on petrochemical feedstocks. Electrolysis-based manufacturing, powered by renewables, is a rapidly evolving technology that might be capable of drastically reducing CO2 emissions from the chemical sector. However, will it be possible to scale up electrolysis systems to the extent necessary to entirely decarbonize all chemical plants? Applying a forward-looking scenario, this perspective estimates how much energy will be needed to power full-scale electrolysis based chemical manufacturing by 2050. A significant gap is identified between the currently planned renewable energy expansion and the energy input necessary to electrify the chemical production: at minimum, the energy required for production of hydrogen and electrolysis of CO2 corresponds to > 50% of all renewable energy that is planned to be available. To cover this gap, strategies enabling a meaningful reduction of the energy input to electrolysis are being discussed from the perspective of both a single electrolysis system and an integrated electro-plant. Several scale-up oriented research priorities are formulated to underpin timely development and commercial availability of described technologies, as well as to explore synergies and support further growth of the renewable energy sector, essential to realize described paradigm shift in chemical manufacturing.

physics.chem-ph↗

arXiv2022

Possible Origin of Preformed Hole Pairs and Superconductivity in Cuprates

This paper addresses the long standing and controversial issue of the origin of superconductivity in cuprates. Their superconductivity can be attributed to amphoteric defects associated with vacancy sites in copper oxide planes. A local defect lattice relaxation results in a negative-$U$ energy binding two holes on amphoteric defects in the donor configuration that act as preformed boson pair. Thermodynamic equilibrium between defects in the donor and acceptor configurations stabilizes Fermi energy at the amphoteric defect charge transition state assuring resonant coupling between free holes and the localized hole pairs. Model calculations show that the critical temperature is primarily determined by the density of the amphoteric defects in the donor configuration, explaining the ubiquity of dome-like dependence of the critical temperature on the doping as well as its universal dependence on the superfluid density. Intentional doping with chemical acceptors or donors is neither necessary nor sufficient condition for superconductivity that is fully determined by the amphoteric defects whose concentration can be controlled by crystal nonstoichiometry. The only role of chemical doping is changing the balance between concentrations of amphoteric defects in the donor and acceptor configurations resulting in an increase of the superfluid density and thus also the critical temperature for acceptor and a decrease for donor doping. This accounts for the experimentally observed distinct asymmetry between the dome structures for the chemical doping with acceptors and donors. The unusual sensitivity of the critical temperature to external perturbations is explained by the resonant nature of the coupling between free holes and preformed hole pairs. The work has broader implications as it could be applicable to other superconductors with dome-like dependence of the critical temperature on doping.

cond-mat.supr-con↗

arXiv2022

Ratchet based ion pumps for selective ion separations

The development of a selective, membrane-based ion separation technology may prove useful in a wide range of applications such as water treatment, battery recycling, ion specific chemical sensors, extraction of valuable metals from sea water, and bio-medical devices. In this work we show that a flashing ratchet mechanism can be used for high precision ion separation. The suggested ratchet-based ion pumps utilize a unique feature of ratchets, the frequency dependent current reversals, to drive ions with the same charge but different diffusion coefficients in opposite directions. We show that for the prevalent ions in water, ions with a relative diffusion coefficient difference as small as 1% can be separated by driving them in opposite directions with a velocity difference as high as 1.2 mm/s. Since the pumping properties of the ratchet are determined by an electric input signal, the proposed ion pumps can pave the way for simple large-scale, fit-to-purpose selective ion separation systems.

physics.app-ph↗

arXiv2021

Charge Carrier Transport in Iron Pyrite Thin Films: Disorder Induced Variable Range Hopping

The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin films prepared by three different methods. Films have a high hole density and low mobility regardless of the method used for their preparation. The charge transport mechanism is determined to be nearest neighbour hopping (NNH) at near room temperature with Mott-type variable range hopping (VRH) of holes via localized states occurring at lower temperatures. Density functional theory (DFT) predicts that sulfur vacancy induced localized defect states will be situated within the band gap with the charge remaining localized around the defect. The data indicate that the electronic properties including hopping transport in pyrite thin films can be correlated to sulfur vacancy related defect. The results provide insights on electronic properties of pyrite thin films and its implications for charge transport

cond-mat.mtrl-sci↗

arXiv2020

Economically viable CO2 electroreduction embedded within ethylene oxide manufacturing

Electrochemical conversion of CO2 (CO2R) into fuels and chemicals can both reduce CO2 emissions and allow for clean manufacturing in the scenario of significant expansion of renewable power generation. However, large-scale process deployment is currently limited by unfavourable process economics resulting from significant up- and down-stream costs for obtaining pure CO2, separation of reaction products and increased logistical effort. We have discovered a method for economically viable recycling of waste CO2 that addresses these challenges. Our approach is based on integration of a CO2R unit into an existing manufacturing process: ethylene oxide (EO) production, which emits CO2 as a by-product. The standard EO process separates waste CO2 from gas stream, hence the substrate for electroreduction is available at an EO plant at no additional cost. CO2 can be converted into an ethylene-rich stream and recycled on-site back to the EO reactor, which uses ethylene as a raw material, and also the anode product (oxygen) can be simultaneously valorized for the EO production reaction. If powered by a renewable electricity source, the process will significantly (ca. 80%) reduce the CO2 emissions of an EO manufacturing plant. A sensitivity analysis shows that the recycling approach can be economically viable in the short term and that its payback time could be as low as 1-2 years in the regions with higher carbon taxes and/or with access to low-cost electricity sources.

physics.chem-ph↗

arXiv2020

The Bright Side and the Dark Side of Hybrid Organic Inorganic Perovskites

The previously developed bistable amphoteric native defect (BAND) model is used for a comprehensive explanation of the unique photophysical properties and for understanding the remarkable performance of perovskites as photovoltaic materials. It is shown that the amphoteric defects in donor (acceptor) configuration capture a fraction of photoexcited electrons (holes) dividing them into two groups: higher energy bright and lower energy dark electrons (holes). The spatial separation of the dark electrons and the dark holes and the k-space separation of the bright and the dark charge carriers reduce electron hole recombination rates, emulating the properties of an ideal photovoltaic material with a balanced, spatially separated transport of electrons and holes. The BAND model also offers a straightforward explanation for the exceptional insensitivity of the photovoltaic performance of polycrystalline perovskite films to structural and optical inhomogeneities. The blue-shifted radiative recombination of bright electrons and holes results in a large anti-Stokes effect that provides a quantitative explanation for the spectral dependence of the laser cooling effect measured in perovskite platelets.

physics.app-ph↗

arXiv2018

Dynamical decoupling of interacting dipolar spin ensembles

We demonstrate that CPMG and XYXY decoupling sequences with non-ideal $π$ pulses can reduce dipolar interactions between spins of the same species in solids. Our simulations of pulsed electron spin resonance (ESR) experiments show that $π$ rotations with small ($<$~10\%) imperfections refocus instantaneous diffusion. Here, the intractable N-body problem of interacting dipoles is approximated by the average evolution of a single spin in a changing mean field. These calculations agree well with experiments and do not require powerful hardware. Our results add to past attempts to explain similar phenomena in solid state nuclear magnetic resonance (NMR). Although the fundamental physics of NMR are similar to ESR, the larger linewidths in ESR and stronger dipolar interactions between electron spins compared to nuclear spins preclude drawing conclusions from NMR studies alone. For bulk spins, we also find that using XYXY results in less inflation of the deduced echo decay times as compared to decays obtained with CPMG.

cond-mat.mes-hall↗

arXiv2017

Pressure-Temperature Phase Diagram of Vanadium Dioxide

The complexity of strongly correlated electron physics in vanadium dioxide is exemplified as its rich phase diagrams of all kinds, which in turn shed light on the mechanisms behind its various phase transitions. In this work, we map out the hydrostatic pressure - temperature phase diagram of vanadium dioxide nanobeams by independently varying pressure and temperature with a diamond anvil cell. In addition to the well-known insulating M1 (monoclinic) and metallic R (tetragonal) phases, the diagram identifies the existence at high pressures of the insulating M1' (monoclinic, more conductive than M1) phase, and two metallic phases of X (monoclinic) and O (orthorhombic, at high temperature only). Systematic optical and electrical measurements combined with density functional calculations allow us to delineate their phase boundaries as well as reveal some basic features of the transitions.

cond-mat.mtrl-sci↗

arXiv2016

Pressurizing Field-Effect Transistors of Few-Layer MoS2 in a Diamond Anvil Cell

Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic degree of freedom of functional materials via, for example, the field-effect transistor (FET) configuration. Combining these two orthogonal approaches would allow discovery of new physical properties and phases going beyond the known phase space. Such experiments are, however, technically challenging and have not been demonstrated. Herein, we report a feasible strategy to prepare and measure FETs in a DAC by lithographically patterning the nanodevices onto the diamond culet. Multiple-terminal FETs were fabricated in the DAC using few-layer MoS2 and BN as the channel semiconductor and dielectric layer, respectively. It is found that the mobility, conductance, carrier concentration, and contact conductance of MoS2 can all be significantly enhanced with pressure. We expect that the approach could enable unprecedented ways to explore new phases and properties of materials under coupled mechano-electrostatic modulation.

cond-mat.mtrl-sci↗

arXiv2008

Solid state quantum memory using the 31P nuclear spin

The transfer of information between different physical forms is a central theme in communication and computation, for example between processing entities and memory. Nowhere is this more crucial than in quantum computation, where great effort must be taken to protect the integrity of a fragile quantum bit. Nuclear spins are known to benefit from long coherence times compared to electron spins, but are slow to manipulate and suffer from weak thermal polarisation. A powerful model for quantum computation is thus one in which electron spins are used for processing and readout while nuclear spins are used for storage. Here we demonstrate the coherent transfer of a superposition state in an electron spin 'processing' qubit to a nuclear spin 'memory' qubit, using a combination of microwave and radiofrequency pulses applied to 31P donors in an isotopically pure 28Si crystal. The electron spin state can be stored in the nuclear spin on a timescale that is long compared with the electron decoherence time and then coherently transferred back to the electron spin, thus demonstrating the 31P nuclear spin as a solid-state quantum memory. The overall store/readout fidelity is about 90%, attributed to systematic imperfections in radiofrequency pulses which can be improved through the use of composite pulses. We apply dynamic decoupling to protect the nuclear spin quantum memory element from sources of decoherence. The coherence lifetime of the quantum memory element is found to exceed one second at 5.5K.

quant-ph↗