arXiv subjects

Joerg Rottler

Publications and source records attributed to Joerg Rottler.

36 records · Page 2Linked to original sources

arXiv2014

Predicting plasticity with soft vibrational modes: from dislocations to glasses

We show that quasi localized low-frequency modes in the vibrational spectrum can be used to construct soft spots, or regions vulnerable to rearrangement, which serve as a universal tool for the identification of flow defects in solids. We show that soft spots not only encode spatial information, via their location, but also directional information, via directors for particles within each soft spot. Single crystals with isolated dislocations exhibit low-frequency phonon modes that localize at the core, and their polarization pattern predicts the motion of atoms during elementary dislocation glide in exquisite detail. Even in polycrystals and disordered solids, we find that the directors associated with particles in soft spots are highly correlated with the direction of particle displacements in rearrangements.

cond-mat.soft↗

arXiv2014

Spatiotemporal correlations between plastic events in the shear flow of athermal amorphous solids

The slow flow of amorphous solids exhibits striking heterogeneities: swift localised particle rearrangements take place in the midst of a more or less homogeneously deforming medium. Recently, experimental as well as numerical work has revealed spatial correlations between these flow heterogeneities. Here, we use molecular dynamics (MD) simulations to characterise the rearrangements and systematically probe their correlations both in time and in space. In particular, these correlations display a four-fold azimuthal symmetry characteristic of shear stress redistribution in an elastic medium and we unambiguously detect their increase in range with time. With increasing shear rate, correlations become shorter-ranged and more isotropic. In addition, we study a coarse-grained model motivated by the observed flow characteristics and challenge its predictions directly with the MD simulations. While the model captures both macroscopic and local properties rather satisfactorily, the agreement with respect to the spatiotemporal correlations is at most qualitative. The discrepancies provide important insight into relevant physics that is missing in all related coarse-grained models that have been developed for the flow of amorphous materials so far, namely the finite shear wave velocity and the impact of elastic heterogeneities on stress redistribution.

cond-mat.soft↗

arXiv2014

Time dependent elastic response to a local shear transformation in amorphous solids

The elastic response of a two-dimensional amorphous solid to induced local shear transformations, which mimic the elementary plastic events occurring in deformed glasses, is investigated via Molecular Dynamics simulations. We show that for different spatial realizations of the transformation, despite relative fluctuations of order one, the long time equilibrium response averages out to the prediction of the Eshelby inclusion problem for a continuum elastic medium. We characterize the effects of the underlying dynamics on the propagation of the elastic signal. A crossover from a propagative transmission in the case of weakly-damped dynamics to a diffusive transmission for strong damping is evidenced. In the latter case, the full time dependent elastic response is in agreement with the theoretical prediction, obtained by solving the diffusion equation for the displacement field in an elastic medium.

cond-mat.soft↗

arXiv2011

Predictors of cavitation in glassy polymers under tensile strain: a coarse grained molecular dynamics investigation

The nucleation of cavities in a homogenous polymer under tensile strain is investigated in a coarse-grained molecular dynamics simulation. In order to establish a causal relation between local microstructure and the onset of cavitation, a detailed analysis of some local properties is presented. In contrast to common assumptions, the nucleation of a cavity is neither correlated to a local loss of density nor, to the stress at the atomic scale and nor to the chain ends density in the undeformed state. Instead, a cavity in glassy polymers nucleates in regions that display a low bulk elastic modulus. This criterion allows one to predict the cavity position before the cavitation occurs. Even if the localization of a cavity is not directly predictable from the initial configuration, the elastically weak zones identified in the initial state emerge as favorite spots for cavity formation.

cond-mat.mtrl-sci↗

arXiv2010

Deformation-induced accelerated dynamics in polymer glasses

Molecular dynamics simulations are used to investigate the effects of deformation on the segmental dynamics in an aging polymer glass. Individual particle trajectories are decomposed into a series of discontinuous hops, from which we obtain the full distribution of relaxation times and displacements under three deformation protocols: step stress (creep), step strain, and constant strain rate deformation. As in experiments, the dynamics can be accelerated by several orders of magnitude during deformation, and the history dependence is entirely erased during yield (mechanical rejuvenation). Aging can be explained as a result of the long tails in the relaxation time distribution of the glass, and similarly, mechanical rejuvenation is understood through the observed narrowing of this distribution during yield. Although the relaxation time distributions under deformation are highly protocol specific, in each case they may be described by a universal acceleration factor that depends only on the strain.

cond-mat.soft↗

arXiv2010

A microscopic view of accelerated dynamics in deformed polymer glasses

A molecular level analysis of segmental trajectories obtained from molecular dynamics simulations is used to obtain the full relaxation time spectrum in aging polymer glasses subject to three different deformation protocols. As in experiments, dynamics can be accelerated by several orders of magnitude, and a narrowing of the distribution of relaxation times during creep is directly observed. Additionally, the acceleration factor describing the transformation of the relaxation time distributions is computed and found to obey a universal dependence on the global strain, independent of age and deformation protocol.

cond-mat.soft↗

arXiv2009

A systematically coarse-grained model for DNA, and its predictions for persistence length, stacking, twist, and chirality

We introduce a coarse-grained model of DNA with bases modeled as rigid-body ellipsoids to capture their anisotropic stereochemistry. Interaction potentials are all physicochemical and generated from all-atom simulation/parameterization with minimal phenomenology. Persistence length, degree of stacking, and twist are studied by molecular dynamics simulation as functions of temperature, salt concentration, sequence, interaction potential strength, and local position along the chain, for both single- and double-stranded DNA where appropriate. The model of DNA shows several phase transitions and crossover regimes in addition to dehybridization, including unstacking, untwisting, and collapse which affect mechanical properties such as rigidity and persistence length. The model also exhibits chirality with a stable right-handed and metastable left-handed helix.

cond-mat.soft↗

arXiv2009

Atomistic mechanism of physical ageing in glassy materials

Using molecular simulations, we identify microscopic relaxation events of individual particles in ageing structural glasses, and determine the full distribution of relaxation times. We find that the memory of the waiting time $t_w$ elapsed since the quench extends only up to the first relaxation event, while the distribution of all subsequent relaxation times (persistence times) follows a power law completely independent of history. Our results are in remarkable agreement with the well known phenomenological trap model of ageing. A continuous time random walk (CTRW) parametrized with the atomistic distributions captures the entire bulk diffusion behavior and explains the apparent scaling of the relaxation dynamics with $t_w$ during ageing, as well as observed deviations from perfect scaling.

cond-mat.soft↗

arXiv2008

Modification of the aging dynamics of glassy polymers due to a temperature step

Molecular dynamics simulations are used to investigate the connection between thermal history and physical aging in polymer glasses, in particular the effects of a temperature square step. Measurements of two-time correlation functions show that a negative temperature step causes "rejuvenation" of the sample: the entire spectrum of relaxation times appears identical to a younger specimen that did not experience a temperature step. A positive temperature step, however, leads to significant changes in the relaxation times. At short times, the dynamics are accelerated (rejuvenation), whereas at long times the dynamics are slowed (over-aging). All findings are in excellent qualitative agreement with recent experiments. The two regimes can be explained by the competing contributions of dynamical heterogeneities and faster aging dynamics at higher temperatures. As a result of this competition, the transition between rejuvenation and over-aging depends on the length of the square step, with shorter steps causing more rejuvenation and longer steps causing more over-aging. Although the spectrum of relaxation times is greatly modified by a temperature step, the van Hove functions, which measure the distribution of particle displacements, exhibit complete superposition at times when the mean-squared displacements are equal.

cond-mat.soft↗

arXiv2008

Mechanical rejuvenation and over-aging in the soft glassy rheology model

Mechanical rejuvenation and over-aging of glasses is investigated through stochastic simulations of the soft glassy rheology (SGR) model. Strain- and stress-controlled deformation cycles for a wide range of loading conditions are analyzed and compared to molecular dynamics simulations of a model polymer glass. Results indicate that deformation causes predominantly rejuvenation, whereas over-aging occurs only at very low temperature, small strains, and for high initial energy states. Although the creep compliance in the SGR model exhibits full aging independent of applied load, large stresses in the nonlinear creep regime cause configurational changes leading to rejuvenation of the relaxation time spectrum probed after a stress cycle. During recovery, however, the rejuvenated state rapidly returns to the original aging trajectory due to collective relaxations of the internal strain.

cond-mat.soft↗

arXiv2007

Simulations of aging and plastic deformation in polymer glasses

We study the effect of physical aging on the mechanical properties of a model polymer glass using molecular dynamics simulations. The creep compliance is determined simultaneously with the structural relaxation under a constant uniaxial load below yield at constant temperature. The model successfully captures universal features found experimentally in polymer glasses, including signatures of mechanical rejuvenation. We analyze microscopic relaxation timescales and show that they exhibit the same aging characteristics as the macroscopic creep compliance. In addition, our model indicates that the entire distribution of relaxation times scales identically with age. Despite large changes in mobility, we observe comparatively little structural change except for a weak logarithmic increase in the degree of short-range order that may be correlated to an observed decrease in aging with increasing load.

cond-mat.soft↗

arXiv2005

Unified Description of Aging and Rate Effects in Yield of Glassy Solids

The competing effects of slow structural relaxations (aging) and deformation at constant strain rate on the shear yield stress $τ^y$ of simple model glasses are examined using molecular simulations. At long times, aging leads to a logarithmic increase in density and $τ^y$. The yield stress also rises logarithmically with rate, but shows a sharp transition in slope at a rate that decreases with increasing age. We present a simple phenomenological model that includes both intrinsic rate dependence and the change in properties with the total age of the system at yield. As predicted by the model, all data for each temperature collapse onto a universal curve.

cond-mat.soft↗

arXiv2004

Point defect dynamics in bcc metals

We present an analysis of the time evolution of self-interstitial atom and vacancy (point defect) populations in pure bcc metals under constant irradiation flux conditions. Mean-field rate equations are developed in parallel to a kinetic Monte Carlo (kMC) model. When only considering the elementary processes of defect production, defect migration, recombination and absorption at sinks, the kMC model and rate equations are shown to be equivalent and the time evolution of the point defect populations is analyzed using simple scaling arguments. We show that the typically large mismatch of the rates of interstitial and vacancy migration in bcc metals can lead to a vacancy population that grows as the square root of time. The vacancy cluster size distribution under both irreversible and reversible attachment can be described by a simple exponential function. We also consider the effect of highly mobile interstitial clusters and apply the model with parameters appropriate for vanadium and $α-$iron.

cond-mat.mtrl-sci↗

arXiv2004

Strongly Non-Arrhenius Self-Interstitial Diffusion in Vanadium

We study diffusion of self-interstitial atoms (SIAs) in vanadium via molecular dynamics simulations. The <111>-split interstitials are observed to diffuse one-dimensionally at low temperature, but rotate into other <111> directions as the temperature is increased. The SIA diffusion is highly non-Arrhenius. At T<600 K, this behavior arises from temperature-dependent correlations. At T>600 K, the Arrhenius expression for thermally activated diffusion breaks down when the migration barriers become small compared to the thermal energy. This leads to Arrhenius diffusion kinetics at low T and diffusivity proportional to temperature at high T.

cond-mat.mtrl-sci↗

arXiv2003

A Continuum,O(N) Monte-Carlo algorithm for charged particles

We introduce a Monte-Carlo algorithm for the simulation of charged particles moving in the continuum. Electrostatic interactions are not instantaneous as in conventional approaches, but are mediated by a constrained, diffusing electric field on an interpolating lattice. We discuss the theoretical justifications of the algorithm and show that it efficiently equilibrates model polyelectrolytes and polar fluids. In order to reduce lattice artifacts that arise from the interpolation of charges to the grid we implement a local, dynamic subtraction algorithm. This dynamic scheme is completely general and can also be used with other Coulomb codes, such as multigrid based methods.

cond-mat.soft↗

arXiv2003

Shear yielding of amorphous glassy solids: Effect of temperature and strain rate

We study shear yielding and steady state flow of glassy materials with molecular dynamics simulations of two standard models: amorphous polymers and bidisperse Lennard-Jones glasses. For a fixed strain rate, the maximum shear yield stress and the steady state flow stress in simple shear both drop linearly with increasing temperature. The dependence on strain rate can be described by a either a logarithm or a power-law added to a constant. In marked contrast to predictions of traditional thermal activation models, the rate dependence is nearly independent of temperature. The relation to more recent models of plastic deformation and glassy rheology is discussed, and the dynamics of particles and stress in small regions is examined in light of these findings.

cond-mat.soft↗

arXiv2003

Growth, microstructure, and failure of crazes in glassy polymers

We report on an extensive study of craze formation in glassy polymers. Molecular dynamics simulations of a coarse-grained bead-spring model were employed to investigate the molecular level processes during craze nucleation, widening, and breakdown for a wide range of temperature, polymer chain length $N$, entanglement length $N_e$ and strength of adhesive interactions between polymer chains. Craze widening proceeds via a fibril-drawing process at constant drawing stress. The extension ratio is determined by the entanglement length, and the characteristic length of stretched chain segments in the polymer craze is $N_e/3$. In the craze, tension is mostly carried by the covalent backbone bonds, and the force distribution develops an exponential tail at large tensile forces. The failure mode of crazes changes from disentanglement to scission for $N/N_e\sim 10$, and breakdown through scission is governed by large stress fluctuations. The simulations also reveal inconsistencies with previous theoretical models of craze widening that were based on continuum level hydrodynamics.

cond-mat.mtrl-sci↗

arXiv2001

Yield conditions for deformation of amorphous polymer glasses

Shear yielding of glassy polymers is usually described in terms of the pressure-dependent Tresca or von Mises yield criteria. We test these criteria against molecular dynamics simulations of deformation in amorphous polymer glasses under triaxial loading conditions that are difficult to realize in experiments. Difficulties and ambiguities in extending several standard definitions of the yield point to triaxial loads are described. Two definitions, the maximum and offset octahedral stresses, are then used to evaluate the yield stress for a wide range of model parameters. In all cases, the onset of shear is consistent with the pressure-modified von Mises criterion, and the pressure coefficient is nearly independent of many parameters. Under triaxial tensile loading, the mode of failure changes to cavitation.

cond-mat.mtrl-sci↗