SearcharxivSearch

arXiv subjects

Johan Cedervall

Publications and source records attributed to Johan Cedervall.

11 recordsLinked to original sources

Unraveling the symmetry of Al5C3N

The high-temperature ceramic compound Al5C3N with promising application usage belongs to the scarcely studied Al-C-N system. It was originally reported as an ordered compound in the non-centrosymmetric space group P63mc and described as a nanolaminate with an -Al2C-AlN-Al2C2- stacking sequence. The recently reported structural disorder in the related compound Al4SiC4 led us to question this proposed structure for Al5C3N and investigate the possibility of a disordered structure in the centrosymmetric space group P63/mmc. In the present work, we employed different synthesis routes to maximize the yield and quality of the desired phase, and applied a variety of techniques to probe the Al5C3N crystal structure. Our single-crystal X-ray diffraction analysis clearly indicates that the non-centrosymmetric space group P63mc must be rejected. From a joint refinement of single-crystal X-ray and powder neutron diffraction data, the occupancies of C and N were refined at two sites in P63/mmc resulting in the stacking sequence -Al2C-Al(C/N)-Al2(C/N)2-. Furthermore, DFT calculations show that a centrosymmetric disordered structure described in a supercell has the lowest energy, 0.2 eV per formula unit, relative to the previously reported P63mc structure. The calculated band structure shows both direct and indirect band gaps which lead to implications for the physical properties. Finally, STEM analysis provides additional evidence that the crystal structure of Al5C3N is better described in the centrosymmetric space group P63/mmc.

cond-mat.mtrl-sci

A comparison of the spin-phonon behaviour of Fe$_2$P-based magnetocaloric materials

Magnetic refrigeration can provide an environmentally friendly technology to reduce significantly the energy consumption of cooling devices. To retain the sustainability of the device, all parts must be made from abundant materials, excluding e.g. rare earth elements. As such, materials based on Fe$_2$P have shown great potential for magnetocaloric devices. In this study, Fe$_2$P and FeMnP$_{0.55}$Si$_{0.45}$, have been studied using magnetometry, neutron scattering and theoretical modelling with the aim to understand the ferromagnetic transition, related to the magnetocaloric effect. Analysis of the diffraction data of Fe$_2$P showed that it is the Fe$_{3g}$-site that drives the magnetic transition as the Fe$_{3f}$ does not have any magnetic contribution at the magnetic transition temperature. For FeMnP$_{0.55}$Si$_{0.45}$, the magnetic transition is more gradual, on both sites, with coexistence of the para- and ferromagnetic phases close to the magnetic transition. The temperature dependent magnetic structure behaviour are well in agreement with our first principles calculations. Both Fe$_2$P and FeMnP$_{0.55}$Si$_{0.45}$ showed two distinct regions, at different length scales, in their S(\textbf{Q},$\omega$) spectra. The two length scales can be modelled using a different set of magnetic spin states (S), using S$\rm _{Fe}$~=~2 and S$\rm _{Mn}$~=~2.5, consistent with the ground state of the magnetic atoms. QENS at low Q (Q~\textless{}~0.5~\AA{}) shows similar magnetic processes in both compounds with uncorrelated magnetism below the magnetic transition temperature. The uncorrelated state highlights that the magnetic anisotropy does not play a major role in the formation of the magnetic state. Furthermore, this emphasises the existence of a two part system in FeMn(P,Si)-based compounds, that drives the magnetic transition and in turn the magnetocaloric effect.

cond-mat.mtrl-sci

Magnetic properties of the Fe$_5$SiB$_2$-Fe$_5$PB$_2$ system

The magnetic properties of the compound Fe$_5$Si$_{1-x}$P$_{x}$B$_2$ have been studied, with a focus on the Curie temperature $T_\textrm{C}$, saturation magnetization $M_\textrm{S}$, and magnetocrystalline anisotropy. Field and temperature dependent magnetization measurements were used to determine $T_\textrm{C}\left(x\right)$ and $M_\textrm{S}\left(x\right)$. The saturation magnetization at 10 K (300 K) is found to monotonically decrease from $1.11~\mathrm{MA/m}$ ($1.03~\mathrm{MA/m}$) to $0.97~\mathrm{MA/m}$ ($0.87~\mathrm{MA/m}$), as $x$ increases from zero to one. The Curie temperature is determined to be 810 K and 615 K in Fe$_5$SiB$_2$ and Fe$_5$PB$_2$, respectively. The highest $T_\textrm{C}$ is observed for $x=0.1$, while it decreases monotonically for larger $x$. The Curie temperatures have also been theoretically determined to be 700 K and 660 K for Fe$_5$SiB$_2$ and Fe$_5$PB$_2$, respectively, using a combination of density functional theory and Monte Carlo simulations. The magnitude of the effective magnetocrystalline anisotropy was extracted using the law of approach to saturation, revealing an increase with increasing phosphorus concentration. Low--field magnetization vs. temperature results for $x = 0, 0.1, 0.2$ indicate that there is a transition from easy--axis to easy--plane anisotropy with decreasing temperature.

cond-mat.mtrl-sci

Design of thermal hysteresis in nonstoichiometric alloys with giant magnetocaloric effect

The non-stoichiometric Fe$_2$P-type (FeMnP$_{0.5}$Si$_{0.5}$)$_{1-x}$(FeV)$_{x}$ alloys ( $x=0, 0.01$, $0.02$, and $0.03$) have been investigated as potential candidates for magnetic refrigeration near room temperature. The magnetic ordering temperature decreases with increasing FeV concentration, $x$, which can be ascribed to decreased ferromagnetic coupling strength between the magnetic atoms. The strong magnetoelastic coupling in these alloys results in large values of the isothermal entropy change ($\Delta S_M$); $15.7$ J/kgK, at $2$ T magnetic field for the $x = 0$ alloy. $\Delta S_M$ decreases with increasing $x$. Results from M{\"o}ssbauer spectroscopy reveal that the average hyperfine field (in the ferromagnetic state) and average center shift (in the paramagnetic state) have the same decreasing trend as $\Delta S_M$. The thermal hysteresis ($\Delta T_{hyst}$) of the magnetic phase transition decreases with increasing $x$, while the mechanical stability of the alloys improves due to the reduced lattice volume change across the magnetoelastic phase transition. The adiabatic temperature change $\Delta T_{ad}$, which highly depends on $\Delta T_{hyst}$, is $1.7$ K at $1.9$ T applied field for the $x = 0.02$ alloy.

cond-mat.mtrl-sci

Site-specific atomic substitution in a giant magnetocaloric Fe$_2$P-type system

Giant magnetocaloric (GMC) materials constitute a requirement for near room temperature magnetic refrigeration. (Fe,Mn)$_2$(P,Si) is a GMC compound with strong magnetoelastic coupling. The main hindrance towards application of this material is a comparably large temperature hysteresis, which can be reduced by metal site substitution with a nonmagnetic element. However, the (Fe,Mn)$_2$(P,Si) compound has two equally populated metal sites, the tetrahedrally coordinated $3f$ and the pyramidally coordinated $3g$ sites. The magnetic and magnetocaloric properties of such compounds are highly sensitive to the site specific occupancy of the magnetic atoms. Here we have attempted to study separately the effect of $3f$ and $3g$ site substitution with equal amounts of vanadium. Using formation energy calculations, the site preference of vanadium and its influence on the magnetic phase formation are described. A large difference in the isothermal entropy change (as high as 44\%) with substitution in the $3f$ and $3g$ sites is observed. The role of the lattice parameter change with temperature and the strength of the magnetoelastic coupling on the magnetic properties are highlighted.

cond-mat.mtrl-sci

Tuning skyrmions in B20 compounds by 4d and 5d doping

Skyrmion stabilization in novel magnetic systems with the B20 crystal structure is reported here, primarily based on theoretical results. The focus is on the effect of alloying on the 3d sublattice of the B20 structure by substitution of heavier 4d and 5d elements, with the ambition to tune the spin-orbit coupling and its influence on magnetic interactions. State-of-the-art methods based on density functional theory are used to calculate both isotropic and anisotropic exchange interactions. Significant enhancement of the Dzyaloshinskii-Moriya interaction is reported for 5d-doped FeSi and CoSi, accompanied by a large modification of the spin stiffness and spiralization. Micromagnetic simulations coupled to atomistic spin-dynamics and ab initio magnetic interactions reveal a helical ground state and field-induced skyrmions for all these systems. Especially small skyrmions $\sim$50 nm are predicted for Co$_{0.75}$Os$_{0.25}$Si, compared to $\sim$148 nm for Fe$_{0.75}$Co$_{0.25}$Si. Convex-hull analysis suggests that all B20 compounds considered here are structurally stable at elevated temperatures and should be possible to synthesize. This prediction is confirmed experimentally by synthesis and structural analysis of the Ru-doped CoSi systems discussed here, both in powder and in single-crystal forms.

cond-mat.mtrl-sci

Magnetic and mechanical effects of Mn substitutions in AlFe2B2

The mechanical and magnetic properties of the newly discovered MAB-phase class of materials based upon AlFe2B2 were investigated. The samples were synthesised from stoichiometric amounts of all constituent elements. X-ray diffraction shows that the main phase is orthorhombic with an elongated b-axis, similar to AlFe2B2. The low hardness and visual inspection of the samples after deformation indicate that these compounds are deformed via a delamination process. When substituting iron in AlFe2B2 with manganese, the magnetism in the system goes from being ferro- to antiferromagnetic via a disordered ferrimagnetic phase exhibited by AlFeMnB2. Density functional theory calculations indicate a weakening of the magnetic interactions among the transitions metal ions as iron is substituted by manganese in AlFe2B2. The Mn-Mn exchange interactions in AlMn2 B2 are found to be very small.

cond-mat.mtrl-sci

Magnetocrystalline anisotropy of Fe5PB2 and its alloys with Co and 5d elements: a combined first-principles and experimental study

The Fe$_5$PB$_2$ compound offers tunable magnetic properties via the possibility of various combinations of substitutions on the Fe and P-sites. Here, we present a combined computational and experimental study of the magnetic properties of (Fe$_{1-x}$Co$_{x}$)$_5$PB$_2$. Computationally, we are able to explore the full concentration range, while the real samples were only obtained for 0 <= x <= 0.7. The calculated magnetic moments, Curie temperatures, and magnetocrystalline anisotropy energies (MAEs) are found to decrease with increasing Co concentration. Co substitution allows for tuning the Curie temperature in a wide range of values, from about six hundred to zero kelvins. As the MAE depends on the electronic structure in the vicinity of Fermi energy, the geometry of the Fermi surface of Fe$_5$PB$_2$ and the k-resolved contributions to the MAE are discussed. Low temperature measurements of an effective anisotropy constant for a series of (Fe$_{1-x}$Co$_{x}$)$_5$PB$_2$ samples determined the highest value of 0.94 MJ m$^{-3}$ for the terminal Fe$_5$PB$_2$ composition, which then decreases with increasing Co concentration, thus confirming the computational result that Co alloying of Fe$_5$PB$_2$ is not a good strategy to increase the MAE of the system. However, the relativistic version of the fixed spin moment method reveals that a reduction in the magnetic moment of Fe$_5$PB$_2$, by about 25%, produces a fourfold increase of the MAE. Furthermore, calculations for (Fe$_{0.95}$X$_{0.05}$)$_5$PB$_2$ (X = 5$d$ element) indicate that 5% doping of Fe$_5$PB$_2$ with W or Re should double the MAE. These are results of high interest for, e.g., permanent magnet applications, where a large MAE is crucial.

cond-mat.mtrl-sci

AlM2B2 (M=Cr, Mn, Fe, Co, Ni): a group of nanolaminated materials

Combining theory with experiments, we study the phase stability, elastic properties, electronic structure and hardness of layered ternary borides AlCr2B2, AlMn2B2, AlFe2B2, AlCo2B2, and AlNi2B2. We find that the first three borides of this series are stable phases, while AlCo2B2 and AlNi2B2 are metastable. We show that the elasticity increases in the boride series, and predict that AlCr2B2, AlMn2B2, and AlFe2B2 are more brittle, while AlCo2B2 and AlNi2B2 are more ductile. We propose that the elasticity of AlFe2B2 can be improved by alloying it with cobalt or nickel, or a combination of them. We present evidence that these ternary borides represent nanolaminated systems. Based on SEM measurements, we demonstrate that they exhibit the delamination phenomena, which leads to a reduced hardness compared to transition metal mono- and diborides. We discuss the background of delamination by analyzing chemical bonding and theoretical work of separation in these borides.

cond-mat.mtrl-sci

Magnetic properties of Fe$_5$SiB$_2$ and its alloys with P, S, and Co

Fe$_5$SiB$_2$ has been synthesized and magnetic measurements have been carried out, revealing that M$_{\text{sat}}$ = 0.92 MA/m at T = 300 K. The M vs T curve shows a broad peak around T = 160 K. The anisotropy constant, K$_1$, estimated at T = 300 K, is 0.25 MJ/m$^3$. Theoretical analysis of Fe$_5$SiB$_2$ system has been carried out and extended to the full range of Fe$_5$Si$_{1-x}$P$_x$B$_2$, Fe$_5$P$_{1-x}$S$_x$B$_2$, and (Fe$_{1-x}$Co$_x$)$_5$SiB$_2$ compositions. The electronic band structures have been calculated using the Full-Potential Local-Orbital Minimum-Basis Scheme (FPLO-14). The calculated total magnetic moments are 9.20, 9.15, 9.59 and 2.42$μ_B$ per formula units of Fe$_5$SiB$_2$, Fe$_5$PB$_2$, Fe$_5$SB$_2$, and Co$_5$SiB$_2$, respectively. In agreement with experiment, magnetocrystalline anisotropy energies (MAE's) calculated for T = 0 K changes from a negative (easy-plane) anisotropy -0.28 MJ/m$^3$ for Fe$_5$SiB$_2$ to the positive (easy-axis) anisotropy 0.35 MJ/m$^3$ for Fe$_5$PB$_2$. Further increase of the number of p-electrons in Fe$_5$P$_{1-x}$S$_x$B$_2$ leads to an increase of MAE up to 0.77 MJ/m$^3$ for the hypothetical Fe$_5$P$_{0.4}$S$_{0.6}$B$_2$ composition. Volume variation and fixed spin moment calculations (FSM) performed for Fe$_5$SiB$_2$ show an inverse relation between MAE and magnetic moment in the region down to about 15\% reduction of the spin moment. The alloying of Fe$_5$SiB$_2$ with Co is proposed as a practical realization of magnetic moment reduction, which ought to increase MAE. MAE calculated in virtual crystal approximation (VCA) for a full range of (Fe$_{1-x}$Co$_x$)$_5$SiB$_2$ compositions reaches the maximum value of 1.16 MJ/m$^3$ at Co concentration x = 0.3, with the magnetic moment 7.75$μ_B$ per formula unit. Thus, (Fe$_{0.7}$Co$_{0.3}$)$_5$SiB$_2$ is suggested as a candidate for a rare-earth free permanent magnet.

cond-mat.mtrl-sci

Magnetic structure of the magnetocaloric compound AlFe2B2

The crystal and magnetic structures of AlFe2B2 have been studied with a combination of X-ray and neutron diffraction and electronic structure calculations. The magnetic and magnetocaloric properties have been investigated by magnetisation measurements. The samples have been produced using high temperature synthesis and subsequent heat treatments. The compound crystallises in the orthorhombic crystal system Cmmm and it orders ferromagnetically at 285 K through a second order phase transition. At temperatures below the magnetic transition the magnetic moments align along the crystallographic $a$-axis. The magnetic entropy change from 0 to 800 kA/m was found to be -1.3 J/K kg at the magnetic transition temperature.

cond-mat.mtrl-sci