Searcharxiv⌕ Search

arXiv subjects

Johann Laconte

Publications and source records attributed to Johann Laconte.

At least 19 recordsLinked to original sources

Pressure Drop: Gravity Vector Estimation from a Distributed Barometric Pressure Sensor Array

While gravity is often used in mobile robotics as a global constraint for Simultaneous Localization and Mapping (SLAM) algorithms, most estimation methods rely on indirect observation of the gravity vector. In this paper, we propose the use of altimeter measurements to directly observe the direction of the gravity vector. We provide a theoretical evaluation of the estimation noise and validate it through extensive experimental data, along with an evaluation of the impact of intersensor distance on our gravity vector estimates. Experimental results demonstrate that a median error of $0.87^\circ$ on the tilt estimation can be achieved with our system in semi-static scenarios. Furthermore, we demonstrate the potential of this approach by comparing it with state-of-the-art methods based on Inertial Measurement Units (IMUs). We highlight that we achieve similar performance to that of IMU-based systems in highly dynamic scenarios and even outperform in specific cases of accelerometer measurement saturation. Finally, an additional experiment shows the potential use within a robotic system through the integration into an Iterative Closest Point (ICP) algorithm.

cs.RO↗

Steering Through Contact: A Finite-Support Motion Model for Single-Track Center-Articulated Robots

Trajectory planning and control in field robotics rely on predicting how propulsion and steering affect vehicle motion when contact points undergo slip. For articulated vehicles, the point-contact kinematic model (PCK) accounts for the linkage geometry but neglects the rotational resistance distributed along the contacts. We propose a finite-support quadratic model (FSQ) for single-track, center-articulated vehicles that incorporates this resistance through a quasi-static balance of lateral slip. Our approach generalizes the standard PCK formulation by relaxing the contact-point assumption. An exact reduction of the quadratic slip cost to contact moments gives a compact closed-form solution for real-time prediction of lateral velocity and yaw rate. We evaluate the proposed method in real-world experiments across asphalt, grass, ice, and mixed routes, using more than 7 km of data. For five-second predictions, FSQ reduces the weighted median translation and yaw errors by 53.5% and 68.9%, respectively, relative to PCK.

cs.RO↗

Tracking the Ground: Online Lidar Identification of Robot-Induced Soil Deformation in Agricultural Environments

Agriculture faces many challenges, and robotic systems can play an important role in addressing them by improving the efficiency and sustainability of field operations. Among these challenges, preserving soil health is a critical concern, as vehicle-soil interactions can degrade the soil structure and produce unwanted surface deformation. A key step toward soil-aware robotics is to explicitly account for how vehicle traffic deforms the ground, yet soil state is typically not treated as a variable. We address this gap by proposing a framework to quantify traffic-induced soil deformation and estimate its evolution online from lidar observations. The method relies on a reduced-order parametric model that represents the soil behavior via physically interpretable parameters, yielding a continuously updated and observable representation of soil state. Experiments conducted in different soil conditions demonstrate the ability of the approach to capture deformation induced by the robot. By making soil response measurable and interpretable during operation, the proposed framework establishes a basis for soil-aware robotic operation, in which the estimated state can be exploited to adapt robotic behaviors in order to reduce soil degradation.

cs.RO↗

When Obstacles Bend: Modeling Vegetation Deformation in the context of Field Robotics

Autonomous robots operating in natural environments must often interact with vegetation rather than simply avoid it. In this context, traversability is typically defined from the robot's perspective, by measuring how a specific platform responds when moving through the environment. While practical, this viewpoint entangles the assessment of the environment with the robot's own dynamics, making the resulting characterization difficult to transfer across different platforms. More importantly, it does not directly reflect the properties of the vegetation itself, which are the true source of interaction and potential damage in applications such as agriculture and environmental monitoring. To address this limitation, we propose to characterize vegetation through its intrinsic mechanical properties, independently of any specific robot. By combining deformation measurements with contact force data, we estimate the underlying mechanical parameters and reconstruct the vegetation's response to interaction. This enables vegetation-aware navigation based on intrinsic environmental properties rather than platform-dependent metrics.

cs.RO↗

CropCraft: A Procedural World Generator for Robotic Simulation of Agricultural Tasks

The adoption of agroecological practices in modern agriculture requires robotic systems capable of operating in highly diverse and complex field environments. Developing and evaluating such systems relies heavily on simulation, yet generating realistic and configurable 3D environments representative of agroecological diversity remains a major challenge. This paper presents CropCraft, an open-source procedural world generator built on Blender and Python, designed to produce 3D simulation environments tailored to agricultural robotics. CropCraft generates crop fields from a simple YAML configuration file, supporting a wide range of scenarios including intercropping, vineyards, and weed-infested fields. The tool includes a library of 3D plant models (crops, grasses, and weeds) at multiple growth stages, and uses stochastic placement algorithms to realistically reproduce the spatial variability observed in real fields. Generated worlds are directly importable into the Gazebo simulator and include ground-truth annotations for all placed elements, supporting both perception and navigation algorithm development. To demonstrate the practical utility of CropCraft, we apply it to the task of crop-weed semantic segmentation using deep learning. A dataset of 10,000 synthetic images of maize fields with varying weed densities, growth stages, and lighting conditions was generated and used to train several segmentation architectures. Models trained exclusively on synthetic data achieve a sim-to-real gap of approximately 10% mean Intersection over Union (mIoU) on real field images, outperforming previous state-of-the-art synthetic generation approaches. We further show that combining even a few real images with synthetic data improves generalization across domains, providing new insights into the effective use of synthetic data for agricultural perception tasks.

cs.CV↗

A Predictive Control Strategy to Offset-Point Tracking for Agricultural Mobile Robots

Robots are increasingly being deployed in agriculture to support sustainable practices and improve productivity. They offer strong potential to enable precise, efficient, and environmentally friendly operations. However, most existing path-following controllers focus solely on the robot's center of motion and neglect the spatial footprint and dynamics of attached implements. In practice, implements such as mechanical weeders or spring-tine cultivators are often large, rigidly mounted, and directly interacting with crops and soil; ignoring their position can degrade tracking performance and increase the risk of crop damage. To address this limitation, we propose a closed-form predictive control strategy extending the approach introduced in [1]. The method is developed specifically for Ackermann-type agricultural vehicles and explicitly models the implement as a rigid offset point, while accounting for lateral slip and lever-arm effects. The approach is benchmarked against state-of-the-art baseline controllers, including a reactive geometric method, a reactive backstepping method, and a model-based predictive scheme. Real-world agricultural experiments with two different implements show that the proposed method reduces the median tracking error by 24% to 56%, and decreases peak errors during curvature transitions by up to 70%. These improvements translate into enhanced operational safety, particularly in scenarios where the implement operates in close proximity to crop rows.

cs.RO↗

Saturation-Aware Angular Velocity Estimation: Extending the Robustness of SLAM to Aggressive Motions

We propose a novel angular velocity estimation method to increase the robustness of Simultaneous Localization And Mapping (SLAM) algorithms against gyroscope saturations induced by aggressive motions. Field robotics expose robots to various hazards, including steep terrains, landslides, and staircases, where substantial accelerations and angular velocities can occur if the robot loses stability and tumbles. These extreme motions can saturate sensor measurements, especially gyroscopes, which are the first sensors to become inoperative. While the structural integrity of the robot is at risk, the robustness of the SLAM framework is oftentimes given little consideration. Consequently, even if the robot is physically capable of continuing the mission, its operation will be compromised due to a corrupted representation of the world. Regarding this problem, we propose a method to estimate the angular velocity using accelerometers during extreme rotations caused by tumbling. We show that our method reduces the median localization error by 71.5 % in translation and 65.5 % in rotation and is robust to mapping failures, which occurred in 37.5 % of the experiments without our method. We also propose the Tumbling-Induced Gyroscope Saturation (TIGS) dataset, which consists of outdoor experiments recording the motion of a mechanical lidar subject to angular velocities four times higher than other similar datasets available. The dataset is available online at https://github.com/norlab-ulaval/Norlab_wiki/wiki/TIGS-Dataset.

cs.RO↗

Energy Prediction on Sloping Ground for Quadruped Robots

Energy management is a fundamental challenge for legged robots in outdoor environments. Endurance directly constrains mission success, while efficient resource use reduces ecological impact. This paper investigates how terrain slope and heading orientation influence the energetic cost of quadruped locomotion. We introduce a simple energy model that relies solely on standard onboard sensors, avoids specialized instrumentation, and remains applicable in previously unexplored environments. The model is identified from field runs on a commercial quadruped and expressed as a compact function of slope angle and heading. Field validation on natural terrain shows near-linear trends of force-equivalent cost with slope angle, consistently higher lateral costs, and additive behavior across trajectory segments, supporting path-level energy prediction for planning-oriented evaluation.

cs.RO↗

Prepared for the Worst: A Learning-Based Adversarial Attack for Resilience Analysis of the ICP Algorithm

This paper presents a novel method for assessing the resilience of the ICP algorithm via learning-based, worst-case attacks on lidar point clouds. For safety-critical applications such as autonomous navigation, ensuring the resilience of algorithms before deployments is crucial. The ICP algorithm is the standard for lidar-based localization, but its accuracy can be greatly affected by corrupted measurements from various sources, including occlusions, adverse weather, or mechanical sensor issues. Unfortunately, the complex and iterative nature of ICP makes assessing its resilience to corruption challenging. While there have been efforts to create challenging datasets and develop simulations to evaluate the resilience of ICP, our method focuses on finding the maximum possible ICP error that can arise from corrupted measurements at a location. We demonstrate that our perturbation-based adversarial attacks can be used pre-deployment to identify locations on a map where ICP is particularly vulnerable to corruptions in the measurements. With such information, autonomous robots can take safer paths when deployed, to mitigate against their measurements being corrupted. The proposed attack outperforms baselines more than 88% of the time across a wide range of scenarios.

cs.RO↗

Feeling the Force: A Nuanced Physics-based Traversability Sensor for Navigation in Unstructured Vegetation

In many applications, robots are increasingly deployed in unstructured and natural environments where they encounter various types of vegetation. Vegetation presents unique challenges as a traversable obstacle, where the mechanical properties of the plants can influence whether a robot can safely collide with and overcome the obstacle. A more nuanced approach is required to assess the safety and traversability of these obstacles, as collisions can sometimes be safe and necessary for navigating through dense or unavoidable vegetation. This paper introduces a novel sensor designed to directly measure the applied forces exerted by vegetation on a robot: by directly capturing the push-back forces, our sensor provides a detailed understanding of the interactions between the robot and its surroundings. We demonstrate the sensor's effectiveness through experimental validations, showcasing its ability to measure subtle force variations. This force-based approach provides a quantifiable metric that can inform navigation decisions and serve as a foundation for developing future learning algorithms.

cs.RO↗

When and Where Localization Fails: An Analysis of the Iterative Closest Point in Evolving Environment

Robust relocalization in dynamic outdoor environments remains a key challenge for autonomous systems relying on 3D lidar. While long-term localization has been widely studied, short-term environmental changes, occurring over days or weeks, remain underexplored despite their practical significance. To address this gap, we present a highresolution, short-term multi-temporal dataset collected weekly from February to April 2025 across natural and semi-urban settings. Each session includes high-density point cloud maps, 360 deg panoramic images, and trajectory data. Projected lidar scans, derived from the point cloud maps and modeled with sensor-accurate occlusions, are used to evaluate alignment accuracy against the ground truth using two Iterative Closest Point (ICP) variants: Point-to-Point and Point-to-Plane. Results show that Point-to-Plane offers significantly more stable and accurate registration, particularly in areas with sparse features or dense vegetation. This study provides a structured dataset for evaluating short-term localization robustness, a reproducible framework for analyzing scan-to-map alignment under noise, and a comparative evaluation of ICP performance in evolving outdoor environments. Our analysis underscores how local geometry and environmental variability affect localization success, offering insights for designing more resilient robotic systems.

cs.RO↗

From Theory to Practice: Identifying the Optimal Approach for Offset Point Tracking in the Context of Agricultural Robotics

Modern agriculture faces escalating challenges: increasing demand for food, labor shortages, and the urgent need to reduce environmental impact. Agricultural robotics has emerged as a promising response to these pressures, enabling the automation of precise and suitable field operations. In particular, robots equipped with implements for tasks such as weeding or sowing must interact delicately and accurately with the crops and soil. Unlike robots in other domains, these agricultural platforms typically use rigidly mounted implements, where the implement's position is more critical than the robot's center in determining task success. Yet, most control strategies in the literature focus on the vehicle body, often neglecting the acctual working point of the system. This is particularly important when considering new agriculture practices where crops row are not necessary straights. This paper presents a predictive control strategy targeting the implement's reference point. The method improves tracking performance by anticipating the motion of the implement, which, due to its offset from the vehicle's center of rotation, is prone to overshooting during turns if not properly accounted for.

cs.RO↗

Pointing the Way: Refining Radar-Lidar Localization Using Learned ICP Weights

This paper presents a novel deep-learning-based approach to improve localizing radar measurements against lidar maps. This radar-lidar localization leverages the benefits of both sensors; radar is resilient against adverse weather, while lidar produces high-quality maps in clear conditions. However, owing in part to the unique artefacts present in radar measurements, radar-lidar localization has struggled to achieve comparable performance to lidar-lidar systems, preventing it from being viable for autonomous driving. This work builds on ICP-based radar-lidar localization by including a learned preprocessing step that weights radar points based on high-level scan information. To train the weight-generating network, we present a novel, stand-alone, open-source differentiable ICP library. The learned weights facilitate ICP by filtering out harmful radar points related to artefacts, noise, and even vehicles on the road. Combining an analytical approach with a learned weight reduces overall localization errors and improves convergence in radar-lidar ICP results run on real-world autonomous driving data. Our code base is publicly available to facilitate reproducibility and extensions.

cs.RO↗

Collision-Aware Traversability Analysis for Autonomous Vehicles in the Context of Agricultural Robotics

In this paper, we introduce a novel method for safe navigation in agricultural robotics. As global environmental challenges intensify, robotics offers a powerful solution to reduce chemical usage while meeting the increasing demands for food production. However, significant challenges remain in ensuring the autonomy and resilience of robots operating in unstructured agricultural environments. Obstacles such as crops and tall grass, which are deformable, must be identified as safely traversable, compared to rigid obstacles. To address this, we propose a new traversability analysis method based on a 3D spectral map reconstructed using a LIDAR and a multispectral camera. This approach enables the robot to distinguish between safe and unsafe collisions with deformable obstacles. We perform a comprehensive evaluation of multispectral metrics for vegetation detection and incorporate these metrics into an augmented environmental map. Utilizing this map, we compute a physics-based traversability metric that accounts for the robot's weight and size, ensuring safe navigation over deformable obstacles.

cs.RO↗

Under Pressure: Altimeter-Aided ICP for 3D Maps Consistency

We propose a novel method to enhance the accuracy of the Iterative Closest Point (ICP) algorithm by integrating altitude constraints from a barometric pressure sensor. While ICP is widely used in mobile robotics for Simultaneous Localization and Mapping ( SLAM ), it is susceptible to drift, especially in underconstrained environments such as vertical shafts. To address this issue, we propose to augment ICP with altimeter measurements, reliably constraining drifts along the gravity vector. To demonstrate the potential of altimetry in SLAM , we offer an analysis of calibration procedures and noise sensitivity of various pressure sensors, improving measurements to centimeter-level accuracy. Leveraging this accuracy, we propose a novel ICP formulation that integrates altitude measurements along the gravity vector, thus simplifying the optimization problem to 3-Degree Of Freedom (DOF). Experimental results from real-world deployments demonstrate that our method reduces vertical drift by 84% and improves overall localization accuracy compared to state-of-the-art methods in non-planar environments.

cs.RO↗

A Novel Control Strategy for Offset Points Tracking in the Context of Agricultural Robotics

In this paper, we present a novel method to control a rigidly connected location on the vehicle, such as a point on the implement in case of agricultural tasks. Agricultural robots are transforming modern farming by enabling precise and efficient operations, replacing humans in arduous tasks while reducing the use of chemicals. Traditionnaly, path_following algorithms are designed to guide the vehicle's center along a predefined trajetory. However, since the actual agronomic task is performed by the implement, it is essential to control a specific point on the implement itself rather than vehicle's center. As such, we present in this paper two approaches for achieving the control of an offset point on the robot. The first approach adapts existing control laws, initially inteded for rear axle's midpoint, to manage the desired lateral deviation. The second approach employs backstepping control techniques to create a control law that directly targets the implement. We conduct real-world experiments, highlighting the limitations of traditional approaches for offset points control, and demonstrating the strengths and weaknesses of the proposed methods.

eess.SY↗

Toward a Better Understanding of Robot Energy Consumption in Agroecological Applications

In this paper, we present a comprehensive analysis and discussion of energy consumption in agricultural robots. Robots are emerging as a promising solution to address food production and agroecological challenges, offering potential reductions in chemical use and the ability to perform strenuous tasks beyond human capabilities. The automation of agricultural tasks introduces a previously unattainable level of complexity, enabling robots to optimize trajectories, control laws, and overall task planning. Consequently, automation can lead to higher levels of energy optimization in agricultural tasks. However, the energy consumption of robotic platforms is not fully understood, and a deeper analysis of contributing factors is essential to optimize energy use. We analyze the energy data of an automated agricultural tractor performing tasks throughout the year, revealing nontrivial correlations between the robot's velocity, the type of task performed, and energy consumption. This suggests a tradeoff between task efficiency, time to completion, and energy expenditure that can be harnessed to improve the energy efficiency of robotic agricultural operations.

cs.RO↗

3D Mapping of Glacier Moulins: Challenges and lessons learned

In this paper, we present a field report of the mapping of the Athabasca Glacier, using a custom-made lidar-inertial mapping platform. With the increasing autonomy of robotics, a wider spectrum of applications emerges. Among these, the surveying of environmental areas presents arduous and hazardous challenges for human operators. Leveraging automated platforms for data collection holds the promise of unlocking new applications and a deeper comprehension of the environment. Over the course of a week-long deployment, we collected glacier data using a tailor-made measurement platform and reflected on the inherent challenges associated with such experiments. We focus on the insights gained and the forthcoming challenges that robotics must surmount to effectively map these terrains.

cs.RO↗