arXiv subjects

Johann Riemensberger

Publications and source records attributed to Johann Riemensberger.

36 records · Page 2Linked to original sources

arXiv2022

Ultrafast tunable lasers using lithium niobate integrated photonics

Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing.

physics.optics↗

arXiv2022

Tightly confining lithium niobate photonic integrated circuits and lasers

Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to process via dry etching . For this reason, etching tightly confining waveguides - routinely achieved in silicon or silicon nitride - has not been possible. Diamond-like carbon (DLC) was discovered in the 1950s and is a material that exhibits an amorphous phase, excellent hardness, and the ability to be deposited in nano-metric thin films. It has excellent thermal, mechanical, and electrical properties, making it an ideal protective coating. Here we demonstrate that DLC is also a superior material for the manufacturing of next-generation photonic integrated circuits based on ferroelectrics, specifically Lithium Niobate on insulator (LNOI). Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss photonic integrated circuits with losses as low as 5.6 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than 1 order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a frequency agile hybrid integrated III-V Lithium Niobate based laser with kHz linewidth and tuning rate of 0.7 Peta-Hertz per second with excellent linearity and CMOS-compatible driving voltage. Our approach can herald a new generation of tightly confining ferroelectric photonic integrated circuits.

physics.optics↗

arXiv2022

Dissipative solitons and switching waves in dispersion folded Kerr cavities

We theoretically and experimentally investigate the formation of dissipative coherent structures in Kerr nonlinear optical microresonators, whose integrated dispersion exceeds the free-spectral range. We demonstrate that the presence of any periodic modulation along the resonator's circumference, such as periodically varying dispersion, can excite higher-order comb structures. We explore the outcomes of coherent microcomb generation in both cases of anomalous and normal dispersion. We are able to access this regime in microresonators via the high peak power of synchronous pulse-driving. For solitons in anomalous dispersion, we observe the formation of higher-order phase-matched dispersive waves (`Kelly-like' sidebands), where the folded dispersion crosses the frequency comb grid. In normal dispersion, we see the coexistence of switching wave fronts with Faraday instability-induced period-doubling patterns, manifesting as powerful satellite microcombs highly separated either side of the core microcomb while sharing the same repetition rate. This regime of dispersion-modulated phase matching opens a dimension of Kerr cavity physics and microcomb generation, particularly for the spectral extension and tuneability of microcombs in normal dispersion.

physics.optics↗

arXiv2022

A photonic integrated circuit based erbium-doped amplifier

Erbium-doped fiber amplifiers have revolutionized long-haul optical communications and laser technology. Erbium ions could equally provide a basis for efficient optical amplification in photonic integrated circuits. However, this approach has thus far remained impractical due to insufficient output power. Here, we demonstrate a photonic integrated circuit based erbium amplifier reaching 145 mW output power and more than 30 dB small-signal gain -- on par with commercial fiber amplifiers and beyond state-of-the-art III-V heterogeneously integrated semiconductor amplifiers. We achieve this by applying ion implantation to recently emerged ultralow-loss Si3N4 photonic integrated circuits with meter-scale-length waveguides. We utilize the device to increase by 100-fold the output power of soliton microcombs, required for low-noise photonic microwave generation or as a source for wavelength-division multiplexed optical communications. Endowing Si3N4 photonic integrated circuits with gain enables the miniaturization of a wide range of fiber-based devices such as high-pulse-energy femtosecond mode-locked lasers.

physics.optics↗

arXiv2022

Near ultraviolet photonic integrated lasers based on silicon nitride

Low phase noise lasers based on the combination of III-V semiconductors and silicon photonics are well established in the near-infrared spectral regime. Recent advances in the development of low-loss silicon nitride-based photonic integrated resonators have allowed to outperform bulk external diode and fiber lasers in both phase noise and frequency agility in the 1550 nm-telecommunication window. Here, we demonstrate for the first time a hybrid integrated laser composed of a gallium nitride (GaN) based laser diode and a silicon nitride photonic chip-based microresonator operating at record low wavelengths as low as 410 nm in the near-ultraviolet wavelength region suitable for addressing atomic transitions of atoms and ions used in atomic clocks, quantum computing, or for underwater LiDAR. Using self-injection locking to a high Q (0.4 $\times$ 10$^6$) photonic integrated microresonator we observe a phase noise reduction of the Fabry-Pérot laser at 461 nm by a factor greater than 100$\times$, limited by the device quality factor and back-reflection.

physics.optics↗

arXiv2021

Chaotic micro-comb based parallel ranging

The transition to chaos is ubiquitous in nonlinear systems ranging from fluid dynamics and superconducting circuits to biological organisms. Optical systems driven out of equilibrium such as lasers and supercontinuum generation exhibit chaotic states of light with fluctuations of both amplitude and phase and can give rise to Levy statistics, turbulence, and rogue waves. Spatio-temporal chaos also occurs in continuous-wave driven photonic chip based Kerr micro-resonators, where it is referred to as chaotic modulation instability. Such modulation instability states have generally been considered impractical for applications, in contrast to their coherent light state counterparts, which include soliton or dark-pulse states. Here we demonstrate that incoherent and chaotic states of light in an optical microresonator can be harnessed to implement unambiguous and interference-immune massively parallel coherent laser ranging by using the intrinsic random amplitude and phase modulation of the chaotic comb lines. We utilize 40 distinct lines of a microresonator frequency comb operated in the modulation instability regime. Each line carries more than 1 GHz noise bandwidth, which greatly surpasses the cavity linewidth, and enables to retrieve the distance of objects with cm-scale resolution. Our approach utilizes one of the most widely accessible microcomb states, and offers -- in contrast to dissipative Kerr soliton states -- high conversion efficiency, as well as flat optical spectra, and alleviates the need for complex laser initiation routines. Moreover the approach generates wideband signal modulation without requiring any electro-optical modulator or microwave synthesizer. Viewed more broadly, similar optical systems capable of chaotic dynamics could be applied to random modulation optical ranging as well as spread spectrum communication and optical cryptography systems.

physics.optics↗

arXiv2021

Dual chirped micro-comb based parallel ranging at megapixel-line rates

Laser based ranging (LiDAR) - already ubiquitously used in industrial monitoring, atmospheric dynamics, or geodesy - is key sensor technology. Coherent laser ranging, in contrast to time-of-flight approaches, is immune to ambient light, operates continuous wave allowing higher average powers, and yields simultaneous velocity and distance information. State-of-the-art coherent single laser-detector architectures reach hundreds of kilopixel per second rates. While emerging applications such as autonomous driving, robotics, and augmented reality mandate megapixel per second point sampling to support real-time video-rate imaging. Yet, such rates of coherent LiDAR have not been demonstrated. Here we report a swept dual-soliton microcomb technique enabling coherent ranging and velocimetry at megapixel per second line scan measurement rates with up to 64 spectrally dispersed optical channels. It is based on recent advances in photonic chip-based microcombs that offer a solution to reduce complexity both on the transmitter and receiver sides. Multi-heterodyning two synchronously frequency-modulated microcombs yields distance and velocity information of all individual ranging channels on a single receiver alleviating the need for individual separation, detection, and digitization. The reported LiDAR implementation is hardware-efficient, compatible with photonic integration, and demonstrates the significant advantages of acquisition speed afforded by the convergence of optical telecommunication and metrology technologies. We anticipate our research will motivate further investigation of frequency swept microresonator dual-comb approach in the neighboring fields of linear and nonlinear spectroscopy, optical coherence tomography.

physics.optics↗

arXiv2021

Compact, spatial-mode-interaction-free, ultralow-loss, nonlinear photonic integrated circuits

Nonlinear photonics based on integrated circuits has enabled applications such as parametric amplifiers, soliton frequency combs, supercontinua, and non-reciprocal devices. Ultralow optical loss and the capability for dispersion engineering are essential, which necessitate the use of multi-mode waveguides. Despite that rich interaction among different spatial waveguide eigenmodes can give rise to novel nonlinear phenomena, spatial mode interaction is typically undesired as it increases optical loss, perturbs local dispersion profile, and impedes soliton formation. Adiabatic bends, such as Euler bends whose curvature varies linearly with their path length, have been favoured to suppress spatial mode interaction. Adiabatic bends can essentially connect any two waveguide segments with adiabatic mode conversion, thus efficiently avoid mode mixing due to mode mismatch. However, previous works lack quantitative measurement data and analysis to fairly evaluate the adiabaticity, and are not based on photonic integrated circuits with tight optical confinement and optical losses of few dB/m. Here, we adapt, optimize, and implement Euler bends to build compact racetrack microresonators based on ultralow-loss, multi-mode, silicon nitride photonic integrated circuits. The racetrack microresonators feature a small footprint of only 0.21 mm^2 for 19.8 GHz FSR. We quantitatively investigate the suppression of spatial mode interaction in the racetrack microresonators with Euler bends. We show that the optical loss rate (15.5 MHz) is preserved, on par with the mode interaction strength (25 MHz). This results in an unperturbed microresonator dispersion profile. We further demonstrate single soliton of 19.8 GHz repetition rate. The optimized Euler bends and racetrack microresonators can be key building blocks for integrated nonlinear photonic systems, programmable processors and photonic quantum computing.

physics.optics↗

arXiv2021

Photonic chip-based continuous-travelling-wave parametric amplifier

The ability to amplify optical signals is of pivotal importance across science and technology. The development of optical amplifiers has revolutionized optical communications, which are today pervasively used in virtually all sensing and communication applications of coherent laser sources. In the telecommunication bands, optical amplifiers typically utilize gain media based on III-V semiconductors or rare-earth-doped fibers. Another way to amplify optical signals is to utilize the Kerr nonlinearity of optical fibers or waveguides via parametric processes. Such parametric amplifiers of travelling continuous wave have been originally developed in the microwave domain, and enable quantum-limited signal amplification with high peak gain, broadband gain spectrum tailored via dispersion control, and ability to enable phase sensitive amplification. Despite these advantages, optical amplifiers based on parametric gain have proven impractical in silica fibers due to the low Kerr nonlinearity. Recent advances in photonic integrated circuits have revived interest in parametric amplifiers due to the significantly increased nonlinearity in various integrated platforms. Yet, despite major progress, continuous-wave-pumped parametric amplifiers built on photonic chips have to date remained out of reach. Here we demonstrate a chip-based travelling-wave optical parametric amplifier with net signal gain in the continuous-wave regime. Using ultralow-loss, dispersion-engineered, meter-long, silicon nitride photonic integrated circuits that are tightly coiled on a photonic chip, we achieve a continuous parametric gain of 12 dB that exceeds both the on-chip optical propagation loss and fiber-chip-fiber coupling losses in the optical C-band.

physics.optics↗

arXiv2021

Ultralow-noise frequency-agile photonic integrated lasers

Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm.

physics.optics↗

arXiv2021

Roadmap on multimode light shaping

Our ability to generate new distributions of light has been remarkably enhanced in recent years. At the most fundamental level, these light patterns are obtained by ingeniously combining different electromagnetic modes. Interestingly, the modal superposition occurs in the spatial, temporal as well as spatio-temporal domain. This generalized concept of structured light is being applied across the entire spectrum of optics: generating classical and quantum states of light, harnessing linear and nonlinear light-matter interactions, and advancing applications in microscopy, spectroscopy, holography, communication, and synchronization. This Roadmap highlights the common roots of these different techniques and thus establishes links between research areas that complement each other seamlessly. We provide an overview of all these areas, their backgrounds, current research, and future developments. We highlight the power of multimodal light manipulation and want to inspire new eclectic approaches in this vibrant research community.

physics.optics↗

arXiv2021

Laser soliton microcombs on silicon

Silicon photonics enables wafer-scale integration of optical functionalities on chip. A silicon-based laser frequency combs could significantly expand the applications of silicon photonics, by providing integrated sources of mutually coherent laser lines for terabit-per-second transceivers, parallel coherent LiDAR, or photonics-assisted signal processing. Here, we report on heterogeneously integrated laser soliton microcombs combining both InP/Si semiconductor lasers and ultralow-loss silicon nitride microresonators on monolithic silicon substrate. Thousands of devices are produced from a single wafer using standard CMOS techniques. Using on-chip electrical control of the microcomb-laser relative optical phase, these devices can output single-soliton microcombs with 100 GHz repetition rate. Our approach paves the way for large-volume, low-cost manufacturing of chip-based frequency combs for next-generation high-capacity transceivers, datacenters, space and mobile platforms.

physics.optics↗

arXiv2021

Dissipative Kerr solitons in a photonic dimer on both sides of exceptional point

Exceptional points are a ubiquitous concept widely present in driven-dissipative coupled systems described by a non-Hermitian Hamiltonian. It is characterized by the degeneracy of the Hamiltonian's eigenvalues and coalescence of corresponding eigenvectors. Recent developments demonstrated that exceptional points can play an important role in photonics. However, to date, exceptional points have been extensively examined in the systems supporting only a few optical modes, thereby leaving the observation of collective (multimode) effects outside of the scope of study. In the present paper, we analyze the role of exceptional points in nonlinear multimode photonics. Specifically, we provide insights into complex nonlinear dynamics arising in a continuous wave-driven pair of strongly coupled nonlinear micro-resonators (i.e. a nonlinear photonic dimer) operating in the multimode regime. Investigating this system, which is known to possess exceptional points, we find two fundamentally different nonlinear regimes of operation corresponding to effective parity-time symmetric and broken parity-time symmetry states. We demonstrate that the photonic dimer can be critically coupled to a bus waveguide, thereby, providing an efficient generation of the dissipative Kerr solitons on both sides of the exceptional point. The parity-time symmetric case, which corresponds to a pair of symmetrically split resonances, has been recently shown to exhibit a variety of emergent phenomena including gear soliton generation, symmetry breaking, and soliton hopping. Dissipative solitons generation in the parity-time symmetry broken case - leading to the dissipation splitting - up to now remains unexplored.

physics.optics↗

arXiv2020

Emergent Nonlinear Phenomena in a Driven Dissipative Photonic Dimer

Emergent phenomena are ubiquitous in nature and refer to spatial, temporal, or spatiotemporal pattern formation in complex nonlinear systems driven out of equilibrium that is not contained in the microscopic descriptions at the single-particle level. Examples range from novel phases of matter in both quantum and classical many-body systems, to galaxy formation or neural dynamics. Two characteristic phenomena are length scales that exceed the characteristic interaction length and spontaneous symmetry breaking. Recent advances in integrated photonics indicate that the study of emergent phenomena is possible in complex coupled nonlinear optical systems. Here we demonstrate that out-of-equilibrium driving of a strongly coupled ("dimer") pair of photonic integrated Kerr microresonators, which at the "single-particle" (i.e. individual resonator) level generate well understood dissipative Kerr solitons, exhibit emergent nonlinear phenomena. By exploring the dimer phase diagram, we find unexpected and therefore unpredicted regimes of soliton hopping, spontaneous symmetry breaking, and periodically emerging (in)commensurate dispersive waves. These phenomena are not included in the single-particle description and related to the parametric frequency conversion between hybridized supermodes. Moreover, by controlling supermode hybridization electrically, we achieve wide tunability of spectral interference patterns between dimer solitons and dispersive waves. Our findings provide the first critical step towards the study of emergent nonlinear phenomena in soliton networks and multimode lattices.

nlin.PS↗

arXiv2020

Soliton microcomb based spectral domain optical coherence tomography

Spectral domain optical coherence tomography (SD-OCT) is a widely used and minimally invaive technique for bio-medical imaging [1]. SD-OCT typically relies on the use of superluminescent diodes (SLD), which provide a low-noise and broadband optical spectrum. Recent advances in photonic chipscale frequency combs [2, 3] based on soliton formation in photonic integrated microresonators provide an chipscale alternative illumination scheme for SD-OCT. Yet to date, the use of such soliton microcombs in OCT has not yet been analyzed. Here we explore the use of soliton microcombs in spectral domain OCT and show that, by using photonic chipscale Si3N4 resonators in conjunction with 1300 nm pump lasers, spectral bandwidths exceeding those of commercial SLDs are possible. We demonstrate that the soliton states in microresonators exhibit a noise floor that is ca. 3 dB lower than for the SLD at identical power, but can exhibit significantly lower noise performance for powers at the milliWatt level. We perform SD-OCT imaging on an ex vivo fixed mouse brain tissue using the soliton microcomb, alongside an SLD for comparison, and demonstrate the principle viability of soliton based SD-OCT. Importantly, we demonstrate that classical amplitude noise of all soliton comb teeth are correlated, i.e. common mode, in contrast to SLD or incoherent microcomb states [4], which should, in theory, improve the image quality. Moreover, we demonstrate the potential for circular ranging, i.e. optical sub-sampling [5, 6], due to the high coherence and temporal periodicity of the soliton state. Taken together, our work indicates the promising properties of soliton microcombs for SD-OCT.

physics.optics↗

arXiv2019

Massively parallel coherent laser ranging using soliton microcombs

Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser based ranging (LIDAR) is currently developed for long range 3D distance and velocimetry in autonomous driving. Its principle is based on mapping distance to frequency, and to simultaneously measure the Doppler shift of reflected light using frequency chirped signals, similar to Sonar or Radar. Yet, despite these advantages, coherent ranging exhibits lower acquisition speed and requires precisely chirped and highly-coherent laser sources, hindering their widespread use and impeding Parallelization, compared to modern time-of-flight (TOF) ranging that use arrays of individual lasers. Here we demonstrate a novel massively parallel coherent LIDAR scheme using a photonic chip-based microcomb. By fast chirping the pump laser in the soliton existence range of a microcomb with amplitudes up to several GHz and sweep rate up to 10 MHz, the soliton pulse stream acquires a rapid change in the underlying carrier waveform, while retaining its pulse-to-pulse repetition rate. As a result, the chirp from a single narrow-linewidth pump laser is simultaneously transferred to all spectral comb teeth of the soliton at once, and allows for true parallelism in FMCW LIDAR. We demonstrate this approach by generating 30 distinct channels, demonstrating both parallel distance and velocity measurements at an equivalent rate of 3 Mpixel/s, with potential to improve sampling rates beyond 150 Mpixel/s and increase the image refresh rate of FMCW LIDAR up to two orders of magnitude without deterioration of eye safety. The present approach, when combined with photonic phase arrays based on nanophotonic gratings, provides a technological basis for compact, massively parallel and ultra-high frame rate coherent LIDAR systems.

physics.app-ph↗

arXiv2019

Nanophotonic soliton-based microwave synthesizers

Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise detection, optical communications and low-noise microwave generation, frequency combs are key building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS compatible photonic integrated circuits, operated with low power and noise, and have already been employed in system-level demonstrations. Yet, currently developed photonic integrated microcombs all operate with repetition rates significantly beyond those that conventional electronics can detect and process, compounding their use in microwave photonics. Here we demonstrate integrated soliton microcombs operating in two widely employed microwave bands, X- and K-band. These devices can produce more than 300 comb lines within the 3-dB-bandwidth, and generate microwave signals featuring phase noise levels below 105 dBc/Hz (140 dBc/Hz) at 10 kHz (1 MHz) offset frequency, comparable to modern electronic microwave synthesizers. In addition, the soliton pulse stream can be injection-locked to a microwave signal, enabling actuator-free repetition rate stabilization, tuning and microwave spectral purification, at power levels compatible with silicon-based lasers (<150 mW). Our results establish photonic integrated soliton microcombs as viable integrated low-noise microwave synthesizers. Further, the low repetition rates are critical for future dense WDM channel generation schemes, and can significantly reduce the system complexity of photonic integrated frequency synthesizers and atomic clocks.

physics.optics↗

arXiv2012

Dispersion engineered high-Q silicon Nitride Ring-Resonators via Atomic Layer Deposition

We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of anomalous dispersion can be significantly increased. All results are confirmed by high resolution frequency-comb-assisted-diode-laser spectroscopy and are in very good agreement with the simulated modification of the mode spectrum.

physics.optics↗