arXiv subjects

Johannes Binder

Publications and source records attributed to Johannes Binder.

At least 19 recordsLinked to original sources

arXiv2026

Ultralow-Tensile Strain Enables Exciton Funneling and Energy Transfer to Boost MoSe2 Photoluminescence Quantum Yield

Strain engineering is a powerful route for controlling the exciton dynamics in van der Waals (vdW) heterostructures (HSs). The interlayer energy transfer (ET) process is another key factor in controlling the photocarrier relaxation pathways in vdW HSs. In this work, we combine these two processes to achieve an 8-fold enhancement to the relative photoluminescence (PL) quantum yield (QY) in a HS formed from monolayers of ReS2 and MoSe2, separated by a thin hBN interlayer, placed onto an hBN bubble. We achieve this enhancement by applying only 0.1% biaxial tensile strain, which results in efficient exciton funneling and an increased transition dipole moment. Our experimental data are supported by first-principles density-functional theory and coherent transfer-matrix method calculations, ruling out optical interference as the dominant origin of the enhancement. This work provides an innovative route for enhancing the PL QY of vdW materials via interplay between the tensile strain and the ET process.

cond-mat.mtrl-sci↗

arXiv2026

Phonon polariton confinement in isotopically pure MOVPE-grown BN triangles

Phonon polaritons, quasiparticles formed by the resonant hybridization of light and lattice vibrations, exhibit unique properties like the possibility of hyperbolic dispersions. In this context, exfoliated hexagonal boron nitride (hBN) has emerged as a promising material for phonon polariton-based research. However, to advance toward practical applications, it is essential to demonstrate efficient phonon-polariton propagation and confinement in large-area epitaxial BN. To address this topic, we use metalorganic vapor phase epitaxy (MOVPE)-grown BN and investigate the phonon polariton properties using scattering-type scanning near-field optical microscopy (s-SNOM) and nanoscale Fourier transform infrared spectroscopy (nano-FTIR). We report remarkably long phonon polariton propagation lengths, indicating the high crystalline quality of the BN layer. By using epitaxially grown isotopically pure triangular islands, we further demonstrate efficient phonon-polariton confinement with mode patterns tunable by the incident light wavelength. Our results pave the way for implementing all-epitaxial, microscale, high-quality polariton resonators for nanophotonics and quantum optics.

cond-mat.mes-hall↗

arXiv2025

Deterministic hBN bubbles as a versatile platform for studies on single-photon emitters

Single-photon emitters (SPEs) in two-dimensional materials are highly promising candidates for quantum technologies. SPEs in hexagonal boron nitride (hBN) have been widely investigated, but mostly in exfoliated or powder samples that require an activation process, making it difficult to compare studies and reproduce results. Here, we address this problem and propose a platform based on large-area metaloraganic vapour phase epitaxy (MOVPE)-grown hBN, which combines reproducibility and scalability with the ability to readily host SPEs without activation. Through the creation of bubbles via electron-beam irradiation, we achieve additional functionalities, including an interference-mediated enhancement of emission by approximately 100-200\%, dedicated structures that allow the relocation of individual emitters across different systems, and the opportunity to investigate strain-induced effects. Moreover, in contrast to other gas-filled bubbles that deflate at low temperatures, our bubbles remain stable under cryogenic conditions, allowing studies as a function of temperature. To improve the control over the shape and position of bubbles, we demonstrate a~mask-based method that enables deterministic control over bubble formation. The presented hBN bubbles constitute a versatile platform for reproducible studies of hBN-based emitters, providing a reliable insight into their nature and properties.

cond-mat.mtrl-sci↗

arXiv2025

Optically detected magnetic resonance of wafer-scale hexagonal boron nitride thin films

Hexagonal boron nitride (hBN) has recently been shown to host native defects exhibiting optically detected magnetic resonance (ODMR) with applications in nanoscale magnetic sensing and imaging. To advance these applications, deposition methods to create wafer-scale hBN films with controlled thicknesses are desirable, but a systematic study of the ODMR properties of the resultant films is lacking. Here we perform ODMR measurements of thin films (3-2000nm thick) grown via three different methods: metal-organic chemical vapour deposition (MOCVD), chemical vapour deposition (CVD), and molecular beam epitaxy (MBE). We find that they all exhibit an ODMR response, including the thinnest 3nm film, albeit with different characteristics. The best volume-normalised magnetic sensitivity obtained is 30uT/sqrt(Hz um^3). We study the effect of growth temperature on a series of MOCVD samples grown under otherwise fixed conditions and find 800-900C to be an optimum range for magnetic sensitivity, with a significant improvement (up to two orders of magnitude) from post-growth annealing. This work provides a useful baseline for the magnetic sensitivity of hBN thin films deposited via standard methods and informs the feasibility of future sensing applications.

cond-mat.mtrl-sci↗

arXiv2025

Mitigation of Delamination of Epitaxial Large-Area Boron Nitride for Semiconductor Processing

Hexagonal boron nitride (hBN) is a promising material for next-generation semiconductor and optoelectronic devices due to its wide bandgap and remarkable optical properties. To apply this material in the semiconductor industry, it is necessary to grow large-area layers on the wafer-scale. For this purpose, chemical vapor deposition methods are highly preferable. However, in the case of epitaxial BN, its fragility and susceptibility to delamination and fold formation during wet processing, such as lithography, present significant challenges to its integration into device fabrication. In this work, we introduce a controlled delamination and redeposition method that effectively prevents the layer from degradation, allowing for multi-step lithographic processes. This approach is applicable to BN layers across a broad thickness range, from tens to hundreds of nanometers, and ensures compatibility with standard photolithographic techniques without compromising the material's intrinsic properties. By addressing key processing challenges, this method paves the way for integrating epitaxial BN into advanced semiconductor and optoelectronic technologies.

cond-mat.mtrl-sci↗

arXiv2025

Nanoscale resolved mapping of the dipole emission of hBN color centers with a scattering-type scanning near-field optical microscope

Color centers in hexagonal boron nitride (hBN) are promising candidates as quantum light sources for future technologies. In this work, we utilize a scattering-type near-field optical microscope (s-SNOM) to study the photoluminescence (PL) emission characteristics of such quantum emitters in metalorganic vapor phase epitaxy grown hBN. On the one hand, we demonstrate direct near-field optical excitation and emission through interaction with the nanofocus of the tip resulting in a sub-diffraction limited tip-enhanced PL hotspot. On the other hand, we show that indirect excitation and emission via scattering from the tip significantly increases the recorded PL intensity. This demonstrates that the tip-assisted PL (TAPL) process efficiently guides the generated light to the detector. We apply the TAPL method to map the in-plane dipole orientations of the hBN color centers on the nanoscale. This work promotes the widely available s-SNOM approach to applications in the quantum domain including characterization and optical control.

cond-mat.mes-hall↗

arXiv2024

Revealing Polytypism in 2D Boron Nitride with UV Photoluminescence

Boron nitride exhibits diverse crystal structures, predominantly a layered arrangement with strong intraplanar covalent bonds and weak interplanar van der Waals bonds. While commonly referred to as hexagonal BN (hBN), the sp$^2$-bonded BN atomic planes can also arrange in other configurations like Bernal (bBN) or rhombohedral (rBN) stacking orders. Variations in the orientation and translation of successive atomic layers lead to changes in crystal symmetry, potentially resulting in piezoelectric, pyroelectric or ferroelectric effects. However, distinguishing between different polytypes using conventional methods like X-ray diffraction or Raman spectroscopy presents a significant challenge. In this work, we demonstrate that the optical response of the 4.1 eV defect can serve as an indicator of the polytype. To this end, we study BN samples grown by metalorganic vapor phase epitaxy (MOVPE), which contain different polytypes. The identification of the polytypes was achieved by X-ray diffraction and transmission electron microscopy. Photoluminescence and cathodoluminescence measurements with a high spatial resolution allowed for the deconvolution of the signal into two components from which we can extract a zero-phonon line (ZPL) at 4.096 eV (302.6 nm) for hBN and 4.143 eV (299.2 nm) for rBN. We performed calculations that enable us to identify the defect as a carbon dimer CBCN (C2) and show that the ZPL shift reflects differences in the crystal environment for different polytypes. Furthermore, we demonstrate that different polytypic composition ratios of hBN and rBN can be achieved by MOVPE, which could pave the way for future applications in large-area van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2024

Manipulating carbon related spin defects in boron nitride by changing the MOCVD growth temperature

A common solution for precise magnetic field sensing is to employ spin-active defects in semiconductors, with the NV center in diamond as prominent example. However, the three-dimensional nature of diamond limits the obtainable proximity of the defect to the sample. Two-dimensional boron nitride, which can host spin-active defects, can be used to overcome those limitations. In this work, we study spin properties of sp2-bonded boron nitride layers grown using Metal Organic Chemical Vapor Deposition at temperatures ranging from 700 $^\circ$C to 1200 $^\circ$C. With Electron Spin Resonance (ESR) we show that our layers exhibit spin properties, which we ascribe to carbon related defects. Supported by photoluminescence and Fourier-transform infrared spectroscopy, we distinguish three different regimes: (i) growth at low temperatures with no ESR signal, (ii) growth at intermediate temperatures with a strong ESR signal and a large number of spin defects, (iii) growth at high temperatures with a weaker ESR signal and a lower number of spin defects. The observed effects can be further enhanced by an additional annealing step. Our studies demonstrate wafer-scale boron nitride that intrinsically hosts spin defects without any ion or neutron irradiation, which may be employed in spin memories or magnetic field detectors.

cond-mat.mtrl-sci↗

arXiv2023

Electrostatically-induced strain of graphene on GaN nanorods

Few-layer graphene deposited on semiconductor nanorods separated by undoped spacers has been studied in perspective for the fabrication of stable nanoresonators. We show that an applied bias between the graphene layer and the nanorod substrate affects the graphene electrode in two ways: 1) by a change of the carrier concentration in graphene and 2) by inducing strain, as demonstrated by the Raman spectroscopy. The capacitance of the investigated structures scales with the area of graphene in contact with the nanorods. Due to the reduced contact surface, the efficiency of graphene gating is one order of magnitude lower than for a comparable structure without nanorods. The shift of graphene Raman modes observed under bias clearly shows the presence of electrostatically-induced strain and only a weak modification of carrier concentration, both independent of number of graphene layers. A higher impact of bias on strain was observed for samples with a larger contact area between the graphene and the nanorods which shows perspective for the construction of sensors and nanoresonator devices.

cond-mat.mes-hall↗

arXiv2023

Bandgap manipulation of hBN by alloying with aluminum: absorption properties of hexagonal BAlN

The versatile range of applications for two-dimensional (2D) materials has encouraged scientists to further engineer the properties of these materials. This is often accomplished by stacking layered materials into more complex van der Waals heterostructures. A much less popular but technologically promising approach is the alloying of 2D materials with different element compositions. In this work, we demonstrate a first step in manipulating the hBN bandgap in terms of its width and indirect/direct character of the optical transitions. We present a set of aluminum alloyed hexagonal boron nitride (hBAlN) samples that were grown by metal organic vapor phase epitaxy (MOVPE) on 2-inch sapphire substrates with different aluminum concentration. Importantly, the obtained samples revealed a sp$^2$-bonded crystal structure. Optical absorption experiments disclosed two strong peaks in the excitonic spectral range with absorption coefficient $α\sim 10^6$ cm$^{-1}$. Their energies correspond very well with the energies of indirect and direct bandgap transitions in hBN. However, they are slightly redshifted. This observation is in agreement with predictions that alloying with Al leads to a decrease of the bandgap energy. The observation of two absorption peaks can be explained in terms of mixing electronic states in the K and M conduction band valleys, which leads to a significant enhancement of the absorption coefficient for indirect transitions.

cond-mat.mtrl-sci↗

arXiv2022

Epitaxial hexagonal boron nitride for hydrogen generation by radiolysis of interfacial water

Hydrogen is an important building block in global strategies towards a future green energy system. To make this transition possible, intense scientific efforts are needed, also in the field of materials science. Two-dimensional crystals, such as hexagonal boron nitride (hBN), are very promising in this regard, as it was demonstrated that micrometer-sized exfoliated flakes are excellent barriers to molecular hydrogen. However, it remains an open question whether large-area layers fabricated by industrially relevant methods preserve such promising properties. In this work we show that electron beam-induced splitting of water creates hBN bubbles that effectively store molecular hydrogen for weeks and under extreme mechanical deformation. We demonstrate that epitaxial hBN allows direct visualization and monitoring of the process of hydrogen generation by radiolysis of interfacial water. Our findings show that hBN is not only a potential candidate for hydrogen storage, but also holds promise for the development of unconventional hydrogen production schemes.

physics.chem-ph↗

arXiv2022

All-BN Distributed Bragg Reflectors Fabricated in a Single MOCVD Process

Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration with other components in the final photonic structure. Here, we demonstrate the fabrication of DBR structures consisting only of undoped boron nitride (BN) layers with high refractive index contrast by using Metal-Organic Chemical Vapor Deposition (MOCVD). This has been achieved in a single process, without the need for any post-process etching. The difference in the refractive index of the component BN layers stems from different degrees of porosity of the individual BN layers, which is a direct result of a different growth temperature. The fabricated DBR structures consist of 15.5 pairs of BN layers and exhibit a reflectance of 87+/-1% at the maximum. The wavelength of maximum reflectance can be tuned from 500 nm up to the Infrared Region (IR), by simply adjusting the growth periods of subsequent BN layers. We also demonstrate that the fabricated structures can be used to create an optical microcavity. The fabricated DBRs are very promising candidates for future applications, for example in combination with single-photon emitters in h-BN, which could allow the building of a cavity-based all-BN single-photon source.

cond-mat.mtrl-sci↗

arXiv2022

Temperature induced giant shift of phonon energy in epitaxial boron nitride layers

The recent progress in the growth of large-area boron nitride epilayers opens up new possibilities for future applications. However, it remains largely unclear how weakly attached two-dimensional BN layers interact with their substrate and how their properties are influenced by defects. In this work, we investigate hBN layers grown by Metal Organic Vapor Phase Epitaxy (MOVPE) using Fourier-transform Infrared (FTIR) spectroscopy in the temperature range of 160-540 K. Our measurements reveal strong differences in the character of layer-substrate interaction for as-grown and delaminated epitaxial layers. A much weaker interaction of as-grown layers is explained by wrinkles formation that reduces strain at the layer-substrate interface, which for layers transferred to other substrates occurs only in a limited temperature range. The most striking result is the observation of a giant increase in the $E_{1u}$ phonon energy of up to $\sim6$ cm$^{-1}$ in a narrow temperature range. We show that the amplitude and temperature range of the anomaly is strongly modified by UV light illumination. The observed giant effect is explained in terms of strain generation resulting from charge redistribution between shallow traps and different defects, which can be interpreted as a result of strong electron-phonon coupling in hBN. The observed narrow temperature range of the anomaly indicates that the effect may be further enhanced for example by electrostrictive effects, expected for sp$^2$ boron nitride.

cond-mat.mes-hall↗

arXiv2021

Heteroepitaxial growth of high optical quality, wafer-scale van der Waals heterostrucutres

Transition metal dichalcogenides (TMDs) are materials that can exhibit intriguing optical properties like a change of the bandgap from indirect to direct when being thinned down to a monolayer. Well-resolved narrow excitonic resonances can be observed for such monolayers, however only for materials of sufficient crystalline quality, so far mostly available in the form of micrometer-sized flakes. A further significant improvement of optical and electrical properties can be achieved by transferring the TMD on hexagonal boron nitride (hBN). To exploit the full potential of TMDs in future applications, epitaxial techniques have to be developed that not only allow to growlarge-scale, high-quality TMD monolayers, but allow to perform the growth directly on large-scale epitaxial hBN. In this work we address this problem and demonstrate that MoSe2 of high optical quality can be directly grown on epitaxial hBN on an entire two-inch wafer. We developed a combined growth theme for which hBN is first synthesized at high temperature by Metal Organic Vapor Phase Epitaxy (MOVPE) and as a second step MoSe2 is deposited on top by Molecular Beam Epitaxy (MBE) at much lower temperatures. We show that this structure exhibits excellent optical properties, manifested by narrow excitonic lines in the photoluminescence spectra. Moreover, the material is homogeneous on the area of the whole two-inch wafer, with only +/-0.14 meV deviation of excitonic energy. Our mixed growth technique may guide the way for future large-scale production of high quality TMD/hBN heterostructures.

cond-mat.mtrl-sci↗

arXiv2021

Pseudomagnetic fields and strain engineering: graphene on GaN nanowires

Gallium nitride nanowire and nanorod substrates with different morphology are prospective platforms allowing to control the local strain distribution in graphene films top of them, resulting in an induction of pseudomagnetic fields. Atomic force microscopy measurements performed in a HybriD mode complemented by scanning electron microscopy allow for a detailed visualization of the strain distribution on graphene surface. Graphene in direct contact with supporting regions is tensile strained, while graphene located in-between is characterized by lower strain. Characteristic tensile strained wrinkles also appear in the areas between the supporting regions. A detailed analysis of the strain distribution shows positive correlation between strain gradient and distances between borders of supporting regions. These results are confirmed by Raman spectroscopy by analysis the D' band intensity, which is affected by an enhancement of intravalley scattering. Furthermore, scanning tunneling spectroscopy shows a local modification of the density of states near the graphene wrinkle and weak localization measurements indicate the enhancement of pseudomagnetic field-induced scattering. Therefore, we show that nanowire and nanorod substrates provide strain engineering and induction of pseudomagnetic fields in graphene. The control of graphene morphology by a modification of distances between supporting regions is promising for both further fundamental research and the exploration of innovative ways to fabricate pseudomagnetic field-based devices like sensors or filters.

cond-mat.mes-hall↗

arXiv2021

Highly effective gating of graphene on GaN

By using four layered graphene/gallium nitride (GaN) Schottky diodes with an undoped GaN spacer, we demonstrate highly effective gating of graphene at low bias rendering this type of structure very promising for potential applications. An observed Raman G band position shift larger than 8.5 cm-1 corresponds to an increase in carrier concentration of about 1.2x10^13 cm-2. The presence of a distinct G band splitting together with a narrow symmetric 2D band indicates turbostratic layer stacking and suggests the presence of a high potential gradient near the Schottky junction even at zero bias. The subbands characterized by the highest Raman energies correspond to the largest concentration of electrons. An analysis based on electroreflectance measurements and a modified Richardson equation confirmed that graphene on n-GaN separated by an undoped GaN spacer behaves like a capacitor at reverse bias. At least 60% of G subband position shifts occur at forward bias, which is related to a rapid reduction of electric field near the Schottky junction. Raman micromapping shows a high uniformity of gating efficiency on the surface. Therefore, our studies demonstrate the usefulness of few layer turbostratic graphene deposited on GaN for tracing electron-phonon coupling in graphene. Multilayer graphene also provides uniform and stable electric contacts. Moreover, the observed bias sensitive G band splitting can be used as an indicator of charge transfer in sensor applications in the low bias regime.

cond-mat.mtrl-sci↗

arXiv2019

Fundamental mechanisms of hBN growth by MOVPE

Hexagonal boron nitride is a promising material for many applications ranging from deep UV emission to an ideal substrate for other two dimensional crystals. Although efforts towards the growth of wafer-scale, high quality material strongly increased in recent years, the understanding of the actual growth mechanism still remains fragmentary and premature. Here, we unveil fundamental growth mechanisms by investigating the growth of hBN by metalorganic vapor phase epitaxy (MOVPE) in a wide range of growth conditions. The obtained results contradict the widespread opinion about the importance of parasitic gas-phase reactions decreasing the growth efficiency. Two different growth mechanisms that depend on ammonia flow and reactor pressure can be distinguished. Both mechanisms are effective in the case of polycrystalline growth, but the growth of highly ordered, flat layers, is strongly hindered. The problem is caused by a low efficiency of boron chemisorption on N-terminated edges of sp2-BN sheets forming the atomic steps on the surface of the layer. Two-dimensional growth can be activated and sustained by the flow modulation epitaxy (FME) method, an alternate switching of ammonia and TEB flows. The success of the FME method is explained in terms of periodic changes between N- and B-terminated reconstructions at the edges of sp2- BN sheets, which restore boron chemisorption. The presented results identify the fundamental growth mechanisms, which is the prerequisite for any further deterministic development of efficient, high-quality, large-scale hBN growth with MOVPE.

cond-mat.mtrl-sci↗

arXiv2017

Optical response of monolayer, few-layer and bulk tungsten disulfide

We present a comprehensive optical study of thin films of tungsten disulfide (WS$_2$) with layer thicknesses ranging from mono- to octalayer and in the bulk limit. It is shown that the optical band-gap absorption of monolayer WS$_2$ is governed by competing resonances arising from one neutral and two distinct negatively charged excitons whose contributions to the overall absorption of light vary as a function of temperature and carrier concentration. The photoluminescence response of monolayer WS$_2$ is found to be largely dominated by disorder/impurity- and/or phonon-assisted recombination processes. The indirect band-gap luminescence in multilayer WS$_2$ turns out to be a phonon-mediated process whose energy evolution with the number of layers surprisingly follows a simple model of a two-dimensional confinement. The energy position of the direct band-gap response (A and B resonances) is only weakly dependent on the layer thickness, which underlines an approximate compensation of the effect of the reduction of the exciton binding energy by the shrinkage of the apparent band gap. The A-exciton absorption-type spectra in multilayer WS$_2$ display a non-trivial fine structure which results from the specific hybridization of the electronic states in the vicinity of the K-point of the Brillouin zone. The effects of temperature on the absorption-like and photoluminescence spectra of various WS$_2$ layers are also quantified.

cond-mat.mes-hall↗