Searcharxiv⌕ Search

arXiv subjects

Johannes Hechtl

Publications and source records attributed to Johannes Hechtl.

6 recordsLinked to original sources

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

cs.RO↗

Learning Where it Matters: Autonomous Data Collection and Offline Reinforcement Learning for Local Contact-Rich Manipulation

Learned policies trained end-to-end on large datasets often remain brittle in high-precision contact-rich tasks. Further, they typically require large amounts of manually collected data and still struggle to generalize to scenes outside of the training scenarios. Classical motion planning, in turn, generalizes well but lacks the precision and contact awareness for tight-tolerance tasks. To reliably solve challenging contact-rich tasks, we propose to leverage robot data and learning where it matters in a modular approach. First, we introduce an autonomous data collection scheme for the real world that collects dense data locally in the contact-rich segment of the task, eliminating reliance on a teleoperator's skill. Second, we show that using offline RL, the collected data can be translated into policies with high success rates. We then integrate our local policies with traditional motion planning to solve long-horizon assembly tasks. Across four real-world tasks, using only 2-2.5 h of autonomous data collection, we achieve an average success rate of 96% for long-horizon tasks, compared to 55% for a planning-only baseline and 37% for the strongest end-to-end baseline. Our local policies also reduce applied forces by 49%. Notably, performance remains at 90% for scene-level out-of-distribution scenarios, while end-to-end approaches struggle. In total, we run over 1500 real-world evaluation rollouts. Our results pave the way for targeted data collection in contact-rich tasks and for high success rates in precision applications. Videos and qualitative results are available at https://learnsyslab.github.io/data_and_learning_where_it_matters/

cs.RO↗

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

cs.RO↗

A Factory-Floor Deployment Case Study of VLA Pipelines for Industrial Packaging Task: Workflow, Failures, and Lessons

Vision-Language-Action (VLA) policies have shown promising manipulation capabilities, yet their practical impact is often limited by the reliability demands of real-world deployment. We present a deployment study of an industrial packaging task at Siemens Factory (GWE, Erlangen, Germany), where a robot must pick a transparent accessory bag from a cluttered pile, insert it into the remaining cavity of a cardboard package, and ensure that the bag and its contents remain below the closing plane. Our goal is to understand the practical effort required to adapt a pretrained Pi0.5 policy to a single factory-floor task through iterative fine-tuning and deployment-driven refinement. The pipeline consists of repeated loops of data collection, curation, fine-tuning, evaluation, and targeted recovery data collection. We have accumulated 2535 episodes (10 hours) from the on-site factory settings. In this paper, we contribute an empirical account of a factory-floor VLA deployment, highlighting recurring failure modes and lessons that inform how to improve the deployment workflow.

cs.RO↗

Enabling Dynamic Tracking in Vision-Language-Action Models via Time-Discrete and Time-Continuous Velocity Feedforward

While vision-language-action (VLA) models have shown great promise for robot manipulation, their deployment on rigid industrial robots remains challenging due to the inherent trade-off between compliance and responsiveness. Standard Behavior Cloning (BC) approaches predict discrete poses at low frequencies, omitting the velocity and acceleration feedforward terms typically used by low-level compliant controllers. This requires to rely on high stiffness for accurate tracking, thereby sacrificing safe contact dynamics. In this paper, we demonstrate the importance of integrating velocity feedforward terms into VLA policies to resolve this trade-off. We propose two methods for extracting velocity targets from VLAs: a time-discrete finite-difference approximation that serves as a highly effective bridge for existing models, and a continuous Cubic B-Spline action space that natively yields $C^2$ continuous trajectories for high-frequency control. Crucially, both approaches are strictly model-agnostic and compatible with any standard action-chunking architecture, requiring modifications only to teleoperation, data processing, and the low-level controller. We fine-tune the $π_{0.5}$ model and evaluate both of our approaches on a demanding, contact-rich cube-in-hole task. Our results indicate that incorporating the velocity feedforward term via finite differences significantly improves task execution speed, while the continuous B-Spline approach maintains high overall success rates and provides a foundation for smoother higher-order derivatives without compromising compliance.

cs.RO↗

Robot Control Stack: A Lean Ecosystem for Robot Learning at Scale

Vision-Language-Action models (VLAs) mark a major shift in robot learning. They replace specialized architectures and task-tailored components of expert policies with large-scale data collection and setup-specific fine-tuning. In this machine learning-focused workflow that is centered around models and scalable training, traditional robotics software frameworks become a bottleneck, while robot simulations offer only limited support for transitioning from and to real-world experiments. In this work, we close this gap by introducing Robot Control Stack (RCS), a lean ecosystem designed from the ground up to support research in robot learning with large-scale generalist policies. At its core, RCS features a modular and easily extensible layered architecture with a unified interface for simulated and physical robots, facilitating sim-to-real transfer. Despite its minimal footprint and dependencies, it offers a complete feature set, enabling both real-world experiments and large-scale training in simulation. Our contribution is twofold: First, we introduce the architecture of RCS and explain its design principles. Second, we evaluate its usability and performance along the development cycle of VLA and RL policies. Our experiments also provide an extensive evaluation of Octo, OpenVLA, and Pi Zero on multiple robots and shed light on how simulation data can improve real-world policy performance. Our code, datasets, weights, and videos are available at: https://robotcontrolstack.github.io/

cs.RO↗