arXiv subjects

Johannes Partzsch

Publications and source records attributed to Johannes Partzsch.

At least 19 recordsLinked to original sources

arXiv2026

A Low-Power Sparse Convolution Accelerator with Idle-First-Task-Assignment for Edge Vision

In recent years, edge-vision monitoring systems for applications such as smart animal husbandry have faced strict tripartite constraints: maintaining input resolution under extremely limited transmission bandwidth and strict power budgets. Conventional dense convolutional neural networks (CNNs) cannot satisfy the resource limits of such constrained IoT nodes. To address this challenge, this paper presents a low-power sparse convolution accelerator for edge devices, fabricated and validated in a 16 nm process. First, the accelerator adopts a bitmap-based format for compression in both data transmission and computation, effectively reducing memory and bandwidth overhead. Second, to mitigate load imbalance in sparse computation, an Idle-First-Task-Assignment (IFTA) dynamic scheduling strategy is proposed, significantly reducing processing-element (PE) idle time and improving multiplier utilization. In addition, a dedicated dataflow is designed to support and accelerate depthwise separable convolution (DWConv), which is widely used in lightweight networks. Experimental results show that the chip occupies only 0.5~mm$^2$ core area and consumes as little as 12--16~mW. On ImageNet, for sparse VGG16 and MobileNetV2, the proposed accelerator achieves 6.5$\times$ and 2.8$\times$ speedups, respectively, over traditional dense accelerators, and also delivers significant performance gains over the existing sparse accelerator.

cs.AR↗

arXiv2026

The SpiNNaker2 chip: a many-core platform for flexible and scalable brain-inspired computing

In deep learning, efficiency gets more and more important to compensate for the ongoing growth in model sizes and applications. Neuromorphic hardware has long been advocated as an upcoming alternative to deep networks, taking inspiration from the brain for achieving unprecedented energy efficiency. However, demonstrations of these gains only recently began to grow in complexity and real-world applicability. With SpiNNaker2, we present a chip that bridges the gap between deep networks and neuromorphic computing and allows for flexible exploration of computing approaches that combine both worlds. It features 152 processing elements equipped with an ARM M4F processor and dedicated accelerators, an extended SpiNNaker routing fabric for scalable event-based communication and a range of external interfaces for system integration, including Gbit Ethernet and an LPDDR4 memory interface. We demonstrate performance and efficiency of the SpiNNaker2 chip for neuromorphic and deep network workloads, as well as novel event-based computing approaches. For deep network workloads, the chip achieves up to 4.5 TOPS in high performance mode and up to 2.7 TOPS/W efficiency in high efficiency mode for INT8 workloads. The chip supports spiking neural networks with >150000 neurons and >1.8 billion synaptic events/s when simulated with a 1 ms time step. Its low baseline power of less than 250 mW allows for efficiency even under varying workload conditions, allowing to explore sparse and event-based modes of computation. All this demonstrates the chip's capabilities as a universal hardware platform for scalable brain-inspired computing and its combinations with mainstream deep network approaches.

cs.ET↗

arXiv2026

Characterization of Off-wafer Pulse Communication in BrainScaleS Neuromorphic System

Neuromorphic VLSI systems take inspiration from biology to enable efficient emulation of large-scale spiking neural networks and to explore new computational paradigms. To establish large neuromorphic systems, a sophisticated routing infrastructure is needed to communicate spikes between chips and to/from the host computer. For the BrainScaleS wafer-scale neuromorphic system considered in this work, especially the stimulation with input spikes and the recording of spikes is demanding, requiring high bandwidth and temporal resolution due to the accelerated emulation of neural dynamics 10.000 faster than biological real time. Here, we present a systematic characterization of the BrainScaleS off-wafer communication infrastructure implemented around Kintex7 FPGAs. The communication flow is characterized in terms of throughput, transmission delay, jitter and pulse loss. Further, we analyze the effect of the communication distortions (like pulse loss and jitter) on a neural benchmark model with highly varying spike activity. The presented methods and techniques for communication evaluation are general applicable and provide useful insights for the mapping of network models to the hardware such as the distribution of input spikes across communication channels.

cs.ET↗

arXiv2025

Efficient Deployment of Spiking Neural Networks on SpiNNaker2 for DVS Gesture Recognition Using Neuromorphic Intermediate Representation

Spiking Neural Networks (SNNs) are highly energy-efficient during inference, making them particularly suitable for deployment on neuromorphic hardware. Their ability to process event-driven inputs, such as data from dynamic vision sensors (DVS), further enhances their applicability to edge computing tasks. However, the resource constraints of edge hardware necessitate techniques like weight quantization, which reduce the memory footprint of SNNs while preserving accuracy. Despite its importance, existing quantization methods typically focus on synaptic weights quantization without taking account of other critical parameters, such as scaling neuron firing thresholds. To address this limitation, we present the first benchmark for the DVS gesture recognition task using SNNs optimized for the many-core neuromorphic chip SpiNNaker2. Our study evaluates two quantization pipelines for fixed-point computations. The first approach employs post training quantization (PTQ) with percentile-based threshold scaling, while the second uses quantization aware training (QAT) with adaptive threshold scaling. Both methods achieve accurate 8-bit on-chip inference, closely approximating 32-bit floating-point performance. Additionally, our baseline SNNs perform competitively against previously reported results without specialized techniques. These models are deployed on SpiNNaker2 using the neuromorphic intermediate representation (NIR). Ultimately, we achieve 94.13% classification accuracy on-chip, demonstrating the SpiNNaker2's potential for efficient, low-energy neuromorphic computing.

cs.LG↗

arXiv2024

68-Channel Highly-Integrated Neural Signal Processing PSoC with On-Chip Feature Extraction, Compression, and Hardware Accelerators for Neuroprosthetics in 22nm FDSOI

Multi-channel electrophysiology systems for recording of neuronal activity face significant data throughput limitations, hampering real-time, data-informed experiments. These limitations impact both experimental neurobiology research and next-generation neuroprosthetics. We present a novel solution that leverages the high integration density of 22nm FDSOI CMOS technology to address these challenges. The proposed highly integrated programmable System-on-Chip comprises 68-channel 0.41 \textmu W/Ch recording frontends, spike detectors, 16-channel 0.87-4.39 \textmu W/Ch action potential and 8-channel 0.32 \textmu W/Ch local field potential codecs, as well as a MAC-assisted power-efficient processor operating at 25 MHz (5.19 \textmu W/MHz). The system supports on-chip training processes for compression, training and inference for neural spike sorting. The spike sorting achieves an average accuracy of 91.48% or 94.12% depending on the utilized features. The proposed PSoC is optimized for reduced area (9 mm2) and power. On-chip processing and compression capabilities free up the data bottlenecks in data transmission (up to 91% space saving ratio), and moreover enable a fully autonomous yet flexible processor-driven operation. Combined, these design considerations overcome data-bottlenecks by allowing on-chip feature extraction and subsequent compression.

eess.SP↗

arXiv2023

Deploying Machine Learning Models to Ahead-of-Time Runtime on Edge Using MicroTVM

In the past few years, more and more AI applications have been applied to edge devices. However, models trained by data scientists with machine learning frameworks, such as PyTorch or TensorFlow, can not be seamlessly executed on edge. In this paper, we develop an end-to-end code generator parsing a pre-trained model to C source libraries for the backend using MicroTVM, a machine learning compiler framework extension addressing inference on bare metal devices. An analysis shows that specific compute-intensive operators can be easily offloaded to the dedicated accelerator with a Universal Modular Accelerator (UMA) interface, while others are processed in the CPU cores. By using the automatically generated ahead-of-time C runtime, we conduct a hand gesture recognition experiment on an ARM Cortex M4F core.

cs.LG↗

arXiv2022

The SpiNNaker 2 Processing Element Architecture for Hybrid Digital Neuromorphic Computing

This paper introduces the processing element architecture of the second generation SpiNNaker chip, implemented in 22nm FDSOI. On circuit level, the chip features adaptive body biasing for near-threshold operation, and dynamic voltage-and-frequency scaling driven by spiking activity. On system level, processing is centered around an ARM M4 core, similar to the processor-centric architecture of the first generation SpiNNaker. To speed operation of subtasks, we have added accelerators for numerical operations of both spiking (SNN) and rate based (deep) neural networks (DNN). PEs communicate via a dedicated, custom-designed network-on-chip. We present three benchmarks showing operation of the whole processor element on SNN, DNN and hybrid SNN/DNN networks.

cs.AR↗

arXiv2022

The Operating System of the Neuromorphic BrainScaleS-1 System

BrainScaleS-1 is a wafer-scale mixed-signal accelerated neuromorphic system targeted for research in the fields of computational neuroscience and beyond-von-Neumann computing. The BrainScaleS Operating System (BrainScaleS OS) is a software stack giving users the possibility to emulate networks described in the high-level network description language PyNN with minimal knowledge of the system. At the same time, expert usage is facilitated by allowing to hook into the system at any depth of the stack. We present operation and development methodologies implemented for the BrainScaleS-1 neuromorphic architecture and walk through the individual components of BrainScaleS OS constituting the software stack for BrainScaleS-1 platform operation.

cs.NE↗

arXiv2020

Low-Power Low-Latency Keyword Spotting and Adaptive Control with a SpiNNaker 2 Prototype and Comparison with Loihi

We implemented two neural network based benchmark tasks on a prototype chip of the second-generation SpiNNaker (SpiNNaker 2) neuromorphic system: keyword spotting and adaptive robotic control. Keyword spotting is commonly used in smart speakers to listen for wake words, and adaptive control is used in robotic applications to adapt to unknown dynamics in an online fashion. We highlight the benefit of a multiply accumulate (MAC) array in the SpiNNaker 2 prototype which is ordinarily used in rate-based machine learning networks when employed in a neuromorphic, spiking context. In addition, the same benchmark tasks have been implemented on the Loihi neuromorphic chip, giving a side-by-side comparison regarding power consumption and computation time. While Loihi shows better efficiency when less complicated vector-matrix multiplication is involved, with the MAC array, the SpiNNaker 2 prototype shows better efficiency when high dimensional vector-matrix multiplication is involved.

cs.NE↗

arXiv2019

Mean Field Approach for Configuring Population Dynamics on a Biohybrid Neuromorphic System

Real-time coupling of cell cultures to neuromorphic circuits necessitates a neuromorphic network that replicates biological behaviour both on a per-neuron and on a population basis, with a network size comparable to the culture. We present a large neuromorphic system composed of 9 chips, with overall 2880 neurons and 144M conductance-based synapses. As they are realized in a robust switched-capacitor fashion, individual neurons and synapses can be configured to replicate with high fidelity a wide range of biologically realistic behaviour. In contrast to other exploration/heuristics-based approaches, we employ a theory-guided mesoscopic approach to configure the overall network to a range of bursting behaviours, thus replicating the statistics of our targeted in-vitro network. The mesoscopic approach has implications beyond our proposed biohybrid, as it allows a targeted exploration of the behavioural space, which is a non-trivial task especially in large, recurrent networks.

cs.ET↗

arXiv2019

Dynamic Power Management for Neuromorphic Many-Core Systems

This work presents a dynamic power management architecture for neuromorphic many core systems such as SpiNNaker. A fast dynamic voltage and frequency scaling (DVFS) technique is presented which allows the processing elements (PE) to change their supply voltage and clock frequency individually and autonomously within less than 100 ns. This is employed by the neuromorphic simulation software flow, which defines the performance level (PL) of the PE based on the actual workload within each simulation cycle. A test chip in 28 nm SLP CMOS technology has been implemented. It includes 4 PEs which can be scaled from 0.7 V to 1.0 V with frequencies from 125 MHz to 500 MHz at three distinct PLs. By measurement of three neuromorphic benchmarks it is shown that the total PE power consumption can be reduced by 75%, with 80% baseline power reduction and a 50% reduction of energy per neuron and synapse computation, all while maintaining temporary peak system performance to achieve biological real-time operation of the system. A numerical model of this power management model is derived which allows DVFS architecture exploration for neuromorphics. The proposed technique is to be used for the second generation SpiNNaker neuromorphic many core system.

cs.NE↗

arXiv2019

Efficient Reward-Based Structural Plasticity on a SpiNNaker 2 Prototype

Advances in neuroscience uncover the mechanisms employed by the brain to efficiently solve complex learning tasks with very limited resources. However, the efficiency is often lost when one tries to port these findings to a silicon substrate, since brain-inspired algorithms often make extensive use of complex functions such as random number generators, that are expensive to compute on standard general purpose hardware. The prototype chip of the 2nd generation SpiNNaker system is designed to overcome this problem. Low-power ARM processors equipped with a random number generator and an exponential function accelerator enable the efficient execution of brain-inspired algorithms. We implement the recently introduced reward-based synaptic sampling model that employs structural plasticity to learn a function or task. The numerical simulation of the model requires to update the synapse variables in each time step including an explorative random term. To the best of our knowledge, this is the most complex synapse model implemented so far on the SpiNNaker system. By making efficient use of the hardware accelerators and numerical optimizations the computation time of one plasticity update is reduced by a factor of 2. This, combined with fitting the model into to the local SRAM, leads to 62% energy reduction compared to the case without accelerators and the use of external DRAM. The model implementation is integrated into the SpiNNaker software framework allowing for scalability onto larger systems. The hardware-software system presented in this work paves the way for power-efficient mobile and biomedical applications with biologically plausible brain-inspired algorithms.

cs.NE↗

arXiv2018

Closed-loop control of a modular neuromorphic biohybrid

Neural networks modularity is a major challenge for the development of control circuits of neural activity. Under physiological limitations, the accessible regions for external stimulation are possibly different from the functionally relevant ones, requiring complex indirect control designs. Moreover, control over one region might affect activity of other downstream networks, once sparse connections exist. We address these questions by developing a hybrid device of a cortical culture functionally integrated with a biomimetic hardware neural network. This design enables the study of modular networks controllability, while connectivity is well-defined and key features of cortical networks are accessible. Using a closed-loop control to monitor the activity of the coupled hybrid, we show that both modules are congruently modified, in the macroscopic as well as the microscopic activity levels. Control impacts efficiently the activity on both sides whether the control circuit is an indirect series one, or implemented independently only on one of the modules. Hence, these results present global functional impacts of a local control intervention. Overall, this strategy provides an experimental access to the controllability of neural activity irregularities, when embedded in a modular organization.

q-bio.NC↗

arXiv2017

Pattern representation and recognition with accelerated analog neuromorphic systems

Despite being originally inspired by the central nervous system, artificial neural networks have diverged from their biological archetypes as they have been remodeled to fit particular tasks. In this paper, we review several possibilites to reverse map these architectures to biologically more realistic spiking networks with the aim of emulating them on fast, low-power neuromorphic hardware. Since many of these devices employ analog components, which cannot be perfectly controlled, finding ways to compensate for the resulting effects represents a key challenge. Here, we discuss three different strategies to address this problem: the addition of auxiliary network components for stabilizing activity, the utilization of inherently robust architectures and a training method for hardware-emulated networks that functions without perfect knowledge of the system's dynamics and parameters. For all three scenarios, we corroborate our theoretical considerations with experimental results on accelerated analog neuromorphic platforms.

q-bio.NC↗

arXiv2017

Neuromorphic Hardware In The Loop: Training a Deep Spiking Network on the BrainScaleS Wafer-Scale System

Emulating spiking neural networks on analog neuromorphic hardware offers several advantages over simulating them on conventional computers, particularly in terms of speed and energy consumption. However, this usually comes at the cost of reduced control over the dynamics of the emulated networks. In this paper, we demonstrate how iterative training of a hardware-emulated network can compensate for anomalies induced by the analog substrate. We first convert a deep neural network trained in software to a spiking network on the BrainScaleS wafer-scale neuromorphic system, thereby enabling an acceleration factor of 10 000 compared to the biological time domain. This mapping is followed by the in-the-loop training, where in each training step, the network activity is first recorded in hardware and then used to compute the parameter updates in software via backpropagation. An essential finding is that the parameter updates do not have to be precise, but only need to approximately follow the correct gradient, which simplifies the computation of updates. Using this approach, after only several tens of iterations, the spiking network shows an accuracy close to the ideal software-emulated prototype. The presented techniques show that deep spiking networks emulated on analog neuromorphic devices can attain good computational performance despite the inherent variations of the analog substrate.

cs.NE↗

arXiv2014

A Biological-Realtime Neuromorphic System in 28 nm CMOS using Low-Leakage Switched Capacitor Circuits

A switched-capacitor (SC) neuromorphic system for closed-loop neural coupling in 28 nm CMOS is presented, occupying 600 um by 600 um. It offers 128 input channels (i.e. presynaptic terminals), 8192 synapses and 64 output channels (i.e. neurons). Biologically realistic neuron and synapse dynam- ics are achieved via a faithful translation of the behavioural equations to SC circuits. As leakage currents significantly affect circuit behaviour at this technology node, dedicated compensation techniques are employed to achieve biological-realtime operation, with faithful reproduction of time constants of several 100 ms at room temperature. Power draw of the overall system is 1.9 mW.

cs.ET↗

arXiv2014

Switched-Capacitor Realization of Presynaptic Short-Term-Plasticity and Stop-Learning Synapses in 28 nm CMOS

Synaptic dynamics, such as long- and short-term plasticity, play an important role in the complexity and biological realism achievable when running neural networks on a neuromorphic IC. For example, they endow the IC with an ability to adapt and learn from its environment. In order to achieve the mil- lisecond to second time constants required for these synaptic dynamics, analog subthreshold circuits are usually employed. However, due to process variation and leakage problems, it is almost impossible to port these types of circuits to modern sub-100nm technologies. In contrast, we present a neuromor- phic system in a 28 nm CMOS process that employs switched capacitor (SC) circuits to implement 128 short term plasticity presynapses as well as 8192 stop-learning synapses. The neuromorphic system consumes an area of 0.36 mm2 and runs at a power consumption of 1.9 mW. The circuit makes use of a technique for minimizing leakage effects allowing for real-time operation with time constants up to sev- eral seconds. Since we rely on SC techniques for all calculations, the system is composed of only generic mixed-signal building blocks. These generic building blocks make the system easy to port between technologies and the large digital circuit part inherent in an SC system benefits fully from technology scaling.

cs.ET↗

arXiv2014

OTA based 200 GΩ resistance on 700 μm2 in 180 nm CMOS for neuromorphic applications

Generating an exponential decay function with a time constant on the order of hundreds of milliseconds is a mainstay for neuromorphic circuits. Usually, either subthreshold circuits or RC-decays based on transconductance amplifiers are used. In the latter case, transconductances in the 10 pS range are needed. However, state-of-the-art low-transconductance amplifiers still require too much circuit area to be applicable in neuromorphic circuits where >100 of these time constant circuits may be required on a single chip. We present a silicon verified operational transconductance amplifier that achieves a gm of 5 pS in only 700 μm2, a factor of 10-100 less area than current examples. This allows a high-density integration of time constant circuits in target appliations such as synaptic learning or as driving circuit for neuromorphic memristor arrays.

q-bio.NC↗