arXiv subjects

Johannes Schiffer

Publications and source records attributed to Johannes Schiffer.

28 records · Page 2Linked to original sources

arXiv2020

Generalized Parameter Estimation-based Observers: Application to Power Systems and Chemical-Biological Reactors

In this paper we propose a new state observer design technique for nonlinear systems. It consists of an extension of the recently introduced parameter estimation-based observer, which is applicable for systems verifying a particular algebraic constraint. In contrast to the previous observer, the new one avoids the need of implementing an open loop integration that may stymie its practical application. We give two versions of this observer, one that ensures asymptotic convergence and the second one that achieves convergence in finite time. In both cases, the required excitation conditions are strictly weaker than the classical persistent of excitation assumption. It is shown that the proposed technique is applicable to the practically important examples of multimachine power systems and chemical-biological reactors.

math.DS↗

arXiv2020

PMU-Based Decentralized Mixed Algebraic and Dynamic State Observation in Multi-Machine Power Systems

We propose a novel decentralized mixed algebraic and dynamic state observation method for multi-machine power systems with unknown inputs and equipped with Phasor Measurement Units (PMUs). More specifically, we prove that for the third-order flux-decay model of a synchronous generator, the local PMU measurements give enough information to reconstruct algebraically the load angle and the quadrature-axis internal voltage. Due to the algebraic structure a high numerical efficiency is achieved, which makes the method applicable to large scale power systems. Also, we prove that the relative shaft speed can be globally estimated combining a classical Immersion and Invariance (I&I) observer with - the recently introduced - dynamic regressor and mixing (DREM) parameter estimator. This adaptive observer ensures global convergence under weak excitation assumptions that are verified in applications. The proposed method does not require the measurement of exogenous inputs signals such as the field voltage and the mechanical torque nor the knowledge of mechanical subsystem parameters.

eess.SY↗

arXiv2020

Data-Driven Internal Model Control of Second-Order Discrete Volterra Systems

The increase in system complexity paired with a growing availability of operational data has motivated a change in the traditional control design paradigm. Instead of modeling the system by first principles and then proceeding with a (model-based) control design, the data-driven control paradigm proposes to directly characterize the controller from data. By exploiting a fundamental result of Willems and collaborators, this approach has been successfully applied to linear systems, yielding data-based formulas for many classical linear controllers. In the present paper, the data-driven approach is extended to a class of nonlinear systems, namely second-order discrete Volterra systems. Two main contributions are made for this class of systems. At first, we show that - under a necessary and sufficient condition on the input data excitation - a data-based system representation can be derived from input-output data and used to replace an explicit system model. That is, the fundamental result of Willems et al. is extended to this class of systems. Subsequently a data-driven internal model control formula for output-tracking is derived. The approach is illustrated via two simulation examples.

math.OC↗

arXiv2020

A Globally Convergent State Observer for Multimachine Power Systems with Lossy Lines

We present the first solution to the problem of estimation of the state of multimachine power systems with lossy transmission lines. We consider the classical three-dimensional \fluxdecay" model of the power system and assume that the active and reactive power as well as the rotor angle and excitation voltage at each generator is available for measurement|a scenario that is feasible with current technology. The design of the observer relies on two recent developments proposed by the authors: a parameter estimation based approach to the problem of state estimation and the use of the dynamic regressor extension and mixing technique to estimate these parameters. Thanks to the combination of these techniques it is possible to overcome the problem of lack of persistent excitation that stymies the application of standard observer designs. Simulation results illustrate the performance of the proposed observer.

eess.SY↗

arXiv2020

State Observation of Power Systems Equipped with Phasor Measurement Units: The Case of Fourth Order Flux-Decay Model

The problem of effective use of Phasor Measurement Units (PMUs) to enhance power systems awareness and security is a topic of key interest. The central question to solve is how to use this new measurements to reconstruct the state of the system. In this paper we provide the first solution to the problem of (globally convergent) state estimation of multimachine power systems equipped with PMUs and described by the fourth order flux-decay model. This work is a significant extension of our previous result, where this problem was solved for the simpler third order model, for which it is possible to recover algebraically part of the unknown state. Unfortunately, this property is lost in the more accurate fourth order model, significantly complicating the state observation task. The design of the observer relies on two recent developments proposed by the authors, a parameter estimation based approach to the problem of state estimation and the use of the Dynamic Regressor Extension and Mixing (DREM) technique to estimate these parameters. The use of DREM allows us to overcome the problem of lack of persistent excitation that stymies the application of standard parameter estimation designs. Simulation results illustrate the latter fact and show the improved performance of the proposed observer with respect to a locally stable gradient-descent based observer.

eess.SY↗

arXiv2019

Online Estimation of Power System Inertia Using Dynamic Regressor Extension and Mixing

The increasing penetration of power-electronic-interfaced devices is expected to have a significant effect on the overall system inertia and a crucial impact on the system dynamics. In the future, the reduction of inertia will have drastic consequences on protection and real-time control and will play a crucial role in the system operation. Therefore, in a highly deregulated and uncertain environment, it is necessary for Transmission System Operators to be able to monitor the system inertia in real time. We address this problem by developing and validating an online inertia estimation algorithm. The estimator is derived using the recently proposed dynamic regressor extension and mixing procedure. The performance of the estimator is demonstrated via several test cases using the 1013-machine ENTSO-E dynamic model.

eess.SY↗

arXiv2018

On the Existence and Long-Term Stability of Voltage Equilibria in Power Systems with Constant Power Loads

Voltage instability is a major threat in power system operation. The growing presence of constant power loads significantly aggravates this issue, hence motivating the development of new analysis methods for both existence and stability of voltage equilibria. Formally, this problem can be cast as the analysis of solutions of a set of nonlinear algebraic equations of the form $f(x)=0$, where $f:\mathbb{R}^n \mapsto \mathbb{R}^{n}$, and the associated differential equation $\dot x=f(x)$. By invoking advanced concepts of dynamical systems theory and effectively exploiting its monotonicity, we exhibit all possible scenarios for existence, uniqueness and stability, of its equilibria. We prove that, if there are equilibria, there is a distinguished one that is locally stable and attractive, and we give some physically-interpretable conditions such that it is unique. Moreover, a simple on-line procedure to decide whether equilibria exist of not, and to compute the distinguished one is proposed. In addition, we show how the proposed framework can be applied to long-term voltage stability analysis in AC power systems, multi-terminal high-voltage DC systems and DC microgrids.

eess.SY↗

arXiv2017

A tool for stability and power sharing analysis of a generalized class of droop controllers for high-voltage direct-current transmission systems

The problem of primary control of high-voltage direct current transmission systems is addressed in this paper, which contains four main contributions. First, to propose a new nonlinear, more realistic, model for the system suitable for primary control design, which takes into account nonlinearities introduced by conventional inner controllers. Second, to determine necessary conditions - dependent on some free controller tuning parameters - for the existence of equilibria. Third, to formulate additional (necessary) conditions for these equilibria to satisfy the power sharing constraints. Fourth, to establish conditions for stability of a given equilibrium point. The usefulness of the theoretical results is illustrated via numerical calculations on a four-terminal example.

eess.SY↗

arXiv2017

Robustness of Distributed Averaging Control in Power Systems: Time Delays & Dynamic Communication Topology

Distributed averaging-based integral (DAI) controllers are becoming increasingly popular in power system applications. The literature has thus far primarily focused on disturbance rejection, steady-state optimality and adaption to complex physical system models without considering uncertainties on the cyber and communication layer nor their effect on robustness and performance. In this paper, we derive sufficient delay-dependent conditions for robust stability of a secondary-frequency-DAI-controlled power system with respect to heterogeneous communication delays, link failures and packet losses. Our analysis takes into account both constant as well as fast-varying delays, and it is based on a common strictly decreasing Lyapunov-Krasovskii functional. The conditions illustrate an inherent trade-off between robustness and performance of DAI controllers. The effectiveness and tightness of our stability certificates are illustrated via a numerical example based on Kundur's four-machine-two-area test system.

math.OC↗

arXiv2016

A survey on modeling of microgrids - from fundamental physics to phasors and voltage sources

Microgrids have been identified as key components of modern electrical systems to facilitate the integration of renewable distributed generation units. Their analysis and controller design requires the development of advanced (typically model-based) techniques naturally posing an interesting challenge to the control community. Although there are widely accepted reduced order models to describe the dynamic behavior of microgrids, they are typically presented without details about the reduction procedure---hampering the understanding of the physical phenomena behind them. Preceded by an introduction to basic notions and definitions in power systems, the present survey reviews key characteristics and main components of a microgrid. We introduce the reader to the basic functionality of DC/AC inverters, as well as to standard operating modes and control schemes of inverter-interfaced power sources in microgrid applications. Based on this exposition and starting from fundamental physics, we present detailed dynamical models of the main microgrid components. Furthermore, we clearly state the underlying assumptions which lead to the standard reduced model with inverters represented by controllable voltage sources, as well as static network and load representations, hence, providing a complete modular model derivation of a three-phase inverter-based microgrid.

eess.SY↗