arXiv subjects

John D. Murphy

Publications and source records attributed to John D. Murphy.

5 recordsLinked to original sources

arXiv2026

Real-time THz ptychography using an optically modulated aperture

Ptychography allows ordinary cameras to perform both quantitative phase and intensity imaging. However, the requirement for relative object to probe motion and high measurement count significantly limits imaging speed and application scope. In this work, we introduce optically modulated aperture ptychography, using a silicon photomodulator as a rapidly reconfigurable aperture, deployable across the microwave, millimeter wave and terahertz bands. We demonstrate experimentally at ~ 0.1 THz real-time ptychographic image capture, without moving parts. Furthermore, a reconfigurable aperture facilitates diverse and spatially multiplexed probes. We use a multiplexed known-probe reconstruction strategy that improves signal-to-noise ratio and increases the information content per measurement, enabling the capture of fluid dynamics at 16 fps. Our optical modulation approach enables high-throughput ptychographic imaging of dynamic samples, for applications such as non-destructive evaluation and in-vivo biomedical imaging.

physics.optics↗

arXiv2026

A microwave super-resolution imaging approach towards breast cancer margin mapping

Accurate characterisation of margins in excised breast cancer tumours is critical to the success of surgical interventions. Yet margin status is typically confirmed post-operatively using histopathology. Here we present a microwave single pixel imaging technique designed for use in intraoperative margin assessment. By leveraging the photo-induced change in microwave transparency of a silicon modulator placed under the sample, we map the microwave reflectivity of tissue-mimicking phantoms with deeply sub-wavelength resolution, allowing hydration mapping across large areas (10 x 10 cm) at ~1 mm resolution. We evaluate the discriminatory capability of our method using gelatine-based tumour phantoms with water-content variations designed to mimic the contrast between malignant tissue and tumour margins in resected breast specimens. We demonstrate the capability to identify, locate and quantify inadequate margins up to the typically targeted minimum thickness of 2 mm. Furthermore, using numerical modelling, we show that our approach is expected to be resilient to patient-specific tissue differences. These results establish microwave single-pixel imaging as a promising route towards real-time intraoperative assessment of margins in excised breast tumours.

physics.optics↗

arXiv2025

Two-fluid mobility model from coupled hydrodynamic equations for simulating laser-driven semiconductor switches

We introduce a two-fluid mobility model incorporating fundamental aspects of electron-hole (e-h) scattering such as momentum conservation for simulating laser-driven semiconductor switches (LDSSs). Compared to previous works that use Matthiessen's rule, the two-fluid mobility model predicts distinct AC responses of e-h plasmas in semiconductors. Based on the two-fluid mobility model, we develop a theory with very few adjustable parameters for simulating the switching performance of LDSSs based on high-purity indirect-gap semiconductors such as silicon (Si). As a prototypical application, we successfully reproduce experimentally measured reflectance at around 320 GHz in a laser-driven Si switch. By injecting e-h plasmas with densities up to $10^{20}\,\rm cm^{-3}$, we reveal the importance of carrier-screening effects in e-h scattering and Auger recombination for carrier densities above the critical carrier density for exciton-plasma Mott transition. Our results also suggest a way to characterize the intrinsic momentum-relaxation mechanism, e-h scattering, and the intrinsic e-h recombination mechanism in indirect-gap semiconductors, Auger recombination. We reassess the ambipolar Auger coefficient of high-purity Si with high injection levels of e-h plasmas up to $10^{20}\,\rm cm^{-3}$ and find a minimal value of $1.8\times10^{-41}\,{\rm cm^6/ns}$. The value is more than one order of magnitude smaller than the ambipolar Auger coefficient widely used for simulating LDSSs, $3.8\times10^{-40}\,{\rm cm^6/ns}$, which was deduced from minority-carrier lifetime in highly doped silicon more than four decades ago.

cond-mat.mtrl-sci↗

arXiv2023

Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion

Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO 2 eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.

physics.app-ph↗

arXiv2023

Terahertz imaging through emissivity control

Adoption of terahertz technologies is hindered by the lack of cost-effective THz sources. Here we demonstrate a fundamentally new way to generate and control THz radiation, via spatio-temporal emissivity modulation. By patterning the optical photoexcitation of a surface-passivated silicon wafer, we locally control the free-electron density, and thereby pattern the wafer's emissivity in the THz part of the electromagnetic spectrum. We show how this unconventional source of controllable THz radiation enables a new form of incoherent computational THz imaging. We use it to image various concealed objects, demonstrating this scheme has the penetrating capability of state-of-the-art THz imaging approaches, without the requirement of femto-second pulsed laser sources. Furthermore, the incoherent nature of thermal radiation also ensures the obtained images are free of interference artifacts. Our spatio-temporal emissivity control paves the way towards a new family of long-wavelength structured illumination, imaging and spectroscopy systems.

physics.optics↗