arXiv subjects

John Krist

Publications and source records attributed to John Krist.

At least 19 recordsLinked to original sources

arXiv2026

The JWST/NIRCam Scattered Light Disks GTO 2780 program: panchromatic coronagraphic imaging of the HD 10647, HD 32297, HD 61005, HD 107146, and HD 181327 debris disk systems

Debris disks, composed of rocks, boulders, planetesimals, and the dust produced in their collisions, present the most readily observable components of mature planetary systems. They also serve as valuable diagnostic tools, enabling studies of planetary dynamical interactions and mineral compositions. Observed from optical to radio wavelengths, each band reveals unique information about the dust populations. Optical and near-infrared observations are specifically sensitive to light scattered off the surfaces of the micron-sized particles. Here, we present results from the JWST/NIRCam GTO program 2780, designed to observe five disk systems previously identified to be exceptionally bright at optical wavelengths (HD 10647, HD 32297, HD 61005, HD 107146, and HD 181327) with six filters using the NIRCam coronagraphs. The NIRCam data complement previous shorter-wavelength images of these same systems. They reveal scattered light from the disks and from the extended halos of tiny grains under the influence of radiative forces, at high resolution and signal to noise. All the systems show evidence for water ice, although it can have differing radial distributions and tends to show stronger signatures in the halos. In the two cases we could analyze, the scattering phase function in the disks resembles the behavior of dust in the Solar System with evidence for enhanced forward scattering in the halos, consistent with the latter being composed of tiny grains. MIRI images for two systems are more centrally concentrated than the shorter wavelength ones, suggesting a role for dragged-in larger grains.

astro-ph.SR↗

arXiv2026

The Roman Coronagraph Community Participation Program: corgisim - a simulation suite for the Nancy Grace Roman Space Telescope Coronagraph Instrument

NASA's Roman Space Telescope will feature a pathfinder Coronagraph Instrument to demonstrate advanced high-contrast imaging from space, paving the way for future missions like the Habitable Worlds Observatory. The Coronagraph Instrument could obtain imaging, polarimetry and spectroscopy of Jupiter analogs in reflected visible light for the first time. We present the development of an open-source simulation package ``corgisim'' as part of the Roman Coronagraph Community Participate Program. Built on established optical propagation libraries including PROPER and CGISim, corgisim provides a user-friendly, publicly available Python framework for end-to-end simulations of the Coronagraph Instrument observations. The package produces high-fidelity, format-compliant data for pre-launch calibration, pipeline testing, and community applications such as target selection and observation planning. We will give an overview of corgisim's infrastructure, functionalities, and current implementation across planned imaging, polarimetry, and spectroscopy modes, including the ability to simulate host stars, injected companions, and extended disks. We will also highlight suitable applications of corgisim and provide guidance on how users can access and employ the software.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: early calibration plan and pilot observation of a companion

Roman is set to launch in weeks! The Coronagraph Instrument - technology pathfinder for future direct imaging missions - is ready to fly too. According to predictions, laboratory tests and high fidelity simulations, it will open a new contrast regime enabling the imaging of mature, giant planets in visible reflected light. The Community Participation Program is responsible for preparing a comprehensive observing program with associated data processing software and calibrations. We give a brief update about the on-going "baseline" calibration plan for the first months. Additionally, we describe a pilot program aiming for the stellar companion HD 29992 B at moderate ~1e-5 to ~1e-6 Band 1 (575 nm) contrast, to be carried out as soon as the instrument is operational. The idea is to generate a canonical data set with a self luminous companion that is easily recoverable. This functional checkout will be precious to best prepare our community, exercise our calibration plan and suite of tools.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: data reduction pipeline astrometric calibration

The Nancy Grace Roman Space Telescope will be equipped with a Technology Demonstration Coronagraph Instrument that will push the current limits of high contrast imaging for exoplanets ($10^{-9}$ contrast). The Roman Coronagraph Community Participation Program has developed corgidrp, a python-based data reduction pipeline for the Roman Coronagraph Instrument that will perform essential data processing and calibration steps for coronagraphic observations. The astrometric calibration function within corgidrp allows us to understand the on-sky angular size and distance scale of science observations by characterizing essential detector parameters: boresight, plate scale, north angle, and optical distortion. Measuring these astrometric calibration products not only helps us understand the science output of our data, but it is what allows us to point the Roman coronagraph accurately at our science target in the first place. Here, we describe the techniques used within the astrometric calibration and demonstrate that our algorithm meets Technology Demonstration Threshold Requirements: (1) compute the on-sky location of the center of CGI EXCAM detector to better than 30 [mas] and (2) compute the on-sky position angles of the camera axes to within 0.3 [deg].

astro-ph.IM↗

arXiv2026

Connecting Polarization to Exoplanet Yield Calculations for HWO

The Habitable Worlds Observatory (HWO) aims to enable the detection and characterization of Earth-like planets around Sun-like stars to search for possible signs of life elsewhere in our universe. This requires an incredibly sensitive coronagraph instrument that suppresses the light from the star by a factor of 10 billion, which must contend with error terms that have not previously limited high-contrast instrumentation at lower levels of starlight suppression. Polarization aberrations are one such source of error that is particularly problematic for coronagraphy on a large space telescope. Optical rays in large, compact astronomical observatories can have large changes in angle of incidence over the beam, which induce polarization aberrations that decrease sensitivities to faint signals at small angular separations. Limiting variation in angles of incidence along the optical path could lead to longer, less stable observatories. This could negatively impact the total number of exo-Earths HWO would be able to detect. This study links open-source physical optics modeling tools to an exoplanet yield optimizer to understand how polarization aberrations influence science return for HWO. We also explore how polarization aberrations scale with change in angle of incidence, which could drive the primary-secondary mirror distance and overall observatory stability. In the visible, we find that decreasing the EAC-1 barrel from 16m to 12m results in $\approx 10^{-10}$ contrast at the IWA where we expect exo-Earths to be. In the UV we appear to be less sensitive to polarization because exo-Earths are farther from the IWA. We also find a limited range over which the design reference mission of EAC-1 can be optimized to compensate for polarization aberrations using altruistic yield optimization. We then report on mitigation strategies to minimize the presence of polarization aberrations in HWO.

astro-ph.IM↗

arXiv2025

Roman coronagraph simulations of exozodi observations in the presence of wavefront errors

The Coronagraph Instrument on board of the Nancy Grace Roman Space Telescope will demonstrate key technologies that will prepare the ground for the Habitable Worlds Observatory. The current predictions for the Roman Coronagraph's detection limit range from 1e-8 to a few 1e-9, which would allow for groundbreaking science, such as potentially imaging Jupiter-like planets. However, the performance of the instrument depends on many factors. Simulating images with varying optical error sources can help us connect instrument and observatory performance to science yield. Here we present corosims, a tool to simulate observations of astrophysical scenes with the Coronagraph with evolving errors. This tool wraps around the Coronagraph PROPER diffraction model and detector simulator. We use it to investigate the potential degeneracy between jitter-induced speckles and both hot and warm exozodi disk structures. First, we simulate observations of exozodi around Tau Ceti, with varying jitter. We predict that with nominal post-correction pointing jitter performance (~0.3 mas RMS), the Roman Coronagraph should be sensitive to 12x zodis worth of dust, assuming a face-on (worst case scenario) inclination. We further predict that its sensitivity degrades to 35x zodis if jitter on-target is 3x worse than the nominal value. This estimate assumes the best-modeled wavefront control and stability values from the project, including additional model uncertainty factors. We find that, while jitter hinders warm exozodi detection, jitter residuals are unlikely to result in a false positive. However, if a faint hot exozodi falls at small separation, it may not be distinguishable from jitter-induced speckle residuals of comparable brightness. Finally, we discuss the degeneracies induced between flux and separation retrieved near the inner working angle due the sharp edge of the Roman Coronagraph's focal plane mask.

astro-ph.EP↗

arXiv2025

High-order wavefront sensing and control for the Roman Coronagraph Instrument (CGI): architecture and measured performance

The Nancy Grace Roman Space Telescope (``Roman'') is a 2.4m space telescope scheduled for a 2026 launch. The Coronagraph Instrument (CGI) on Roman is a technology-demonstration instrument with a coronagraph and, for the first time in space, deformable mirrors and active wavefront control. This paper walks through the algorithmic and system-level architecture of the HOWFSC implementation for CGI, including the use of ground-in-the-loop (GITL) operations to support computationally-expensive operations, and reports on instrument performance measured during thermal vacuum testing in instrument integration and test. CGI achieved better than $5\times10^{-8}$ total raw contrast with two independent coronagraph architectures covering 3-9 and 6-20 $\lambda/D$ between them and a $360^{\circ}$ dark hole on each. The contrast limits appear to be driven by time available for testing, and do not appear to represent a floor in the achievable performance of CGI in flight.

astro-ph.IM↗

arXiv2025

Cross-Model Validation of Coronagraphic Exposure Time Calculators for the Habitable Worlds Observatory: A Report from the Exoplanet Science Yield sub-Working Group

Estimating the exoplanet scientific productivity of the Habitable Worlds Observatory requires estimating science exposure times. From exoplanet yields to spectral retrievals, exposure times are at the heart of our understanding of the capabilities of this future mission. As such, ensuring accuracy and consistency between different exposure time calculators (ETCs) is critical. We summarize the efforts of the Exoplanet Science Yield sub-Working Group's ETC Calibration Task Group, which conducted a calibration study from March 4 to June 30 of 2024. We compare three commonly-used coronagraphic exposure time calculators. We find that the ETCs use a broad variety of differing methods, assumptions, and inputs that produce variation in the final exposure times at the ~60% level. The causes for the disagreement have largely been identified, flagged for further development efforts, and in some cases retired since the conclusion of this effort. We expect that addressing the flagged efforts will bring the ETCs to within better than ~30% agreement.

astro-ph.IM↗

arXiv2024

Searching for Planets Orbiting Vega with the James Webb Space Telescope

The most prominent of the IRAS debris disk systems, $\alpha$ Lyrae (Vega), at a distance of 7.7 pc, has been observed by both the NIRCam and MIRI instruments on the James Webb Space Telescope (JWST). This paper describes NIRCam coronagraphic observations which have achieved F444W contrast levels of 3$\times10^{-7}$ at 1\arcsec\ (7.7 au), 1$\times10^{-7}$ at 2\arcsec\ (15 au) and few $\times 10^{-8}$ beyond 5\arcsec\ (38 au), corresponding to masses of $<$ 3, 2 and 0.5 MJup for a system age of 700 Myr. Two F444W objects are identified in the outer MIRI debris disk, around 48 au. One of these is detected by MIRI, appears to be extended and has a spectral energy distribution similar to those of distant extragalactic sources. The second one also appears extended in the NIRCam data suggestive of an extragalactic nature.The NIRCam limits within the inner disk (1\arcsec\ --10\arcsec) correspond to a model-dependent masses of 2$\sim$3 \mj. \citet{Su2024} argue that planets larger even 0.3 MJup would disrupt the smooth disk structure seen at MIRI wavelengths. Eight additional objects are found within 60\arcsec\ of Vega, but none has astrometric properties or colors consistent with planet candidates. These observations reach a level consistent with expected Jeans Mass limits. Deeper observations achieving contrast levels $<10^{-8}$ outside of $\sim$4\arcsec\ and reaching masses below that of Saturn are possible, but may not reveal a large population of new objects.

astro-ph.EP↗

arXiv2024

Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities

We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations.

astro-ph.IM↗

arXiv2023

Searching for Planets Orbiting Fomalhaut with JWST/NIRCam

We report observations with the JWST/NIRCam coronagraph of the Fomalhaut system. This nearby A star hosts a complex debris disk system discovered by the IRAS satellite. Observations in F444W and F356W filters using the round 430R mask achieve a contrast ratio of ~ 4 x 10-7 at 1'' and ~ 4 x 10-8 outside of 3''. These observations reach a sensitivity limit <1 MJup across most of the disk region. Consistent with the hypothesis that Fomalhaut b is not a massive planet but is a dust cloud from a planetesimal collision, we do not detect it in either F356W or F444W (the latter band where a Jovian-sized planet should be bright). We have reliably detected 10 sources in and around Fomalhaut and its debris disk, all but one of which are coincident with Keck or HST sources seen in earlier coronagraphic imaging; we show them to be background objects, including the "Great Dust Cloud" identified in MIRI data. However, one of the objects, located at the edge of the inner dust disk seen in the MIRI images, has no obvious counterpart in imaging at earlier epochs and has a relatively red [F356W]-[F444W]>0.7 mag (Vega) color. Whether this object is a background galaxy, brown dwarf, or a Jovian mass planet in the Fomalhaut system will be determined by an approved Cycle 2 follow-up program. Finally, we set upper limits to any scattered light from the outer ring, placing a weak limit on the dust albedo at F356W and F444W.

astro-ph.EP↗

arXiv2023

Nancy Grace Roman Space Telescope Coronagraph Instrument Overview and Status

The Nancy Grace Roman Space Telescope Coronagraph Instrument is a critical technology demonstrator for NASA's Habitable Worlds Observatory. With a predicted visible-light flux ratio detection limit of 1E-8 or better, it will be capable of reaching new areas of parameter space for both gas giant exoplanets and circumstellar disks. It is in the final stages of integration and test at the Jet Propulsion Laboratory, with an anticipated delivery to payload integration in the coming year. This paper will review the instrument systems, observing modes, potential observing applications, and overall progress toward instrument integration and test.

astro-ph.IM↗

arXiv2023

The Analytical Performance Model and Error Budget for the Roman Coronagraph Instrument

The Nancy Grace Roman Space Telescope (Roman), under development by NASA, will investigate possible causes for the phenomenon of dark energy and detect and characterize extra-solar planets. The 2.4 m space telescope has two main instruments: a wide-field, infra-red imager and a coronagraph. The coronagraph instrument (CGI) is a technology demonstrator designed to help bridge the gap between the current state-of-the-art space and ground instruments and future high-contrast space coronagraphs that will be capable of detecting and characterizing Earth-like planets in the habitable zones of other stars. Using adaptive optics, including two high-density deformable mirrors and low- and high-order wavefront sensing and control, CGI is designed to suppress the star light by up to 9 orders of magnitude, potentially enabling the direct detection and characterization of Jupiter-class exoplanets. Contrast is the measure of starlight suppression, and high contrast is the chief virtue of a coronagraph. But it is not the only important characteristic: contrast must be balanced against acceptance of planet light. The remaining unsuppressed starlight must also have a stable morphology to allow further estimation and subtraction. To achieve all these goals in the presence of the disturbance and radiation environment of space, the coronagraph must be designed and fabricated as a highly optimized system. The CGI error budget is the top level tool used to guide the optimization, enabling trades of various competing errors. The error budget is based on an analytical model which enables rapid calculation and tracking of performance for the numerous and diverse questions that arise in the system engineering process. In this paper we outline the coronagraph system engineering approach and the error budget.

astro-ph.IM↗

arXiv2023

JWST/NIRCam Coronagraphy of the Young Planet-hosting Debris Disk AU Microscopii

High-contrast imaging of debris disk systems permits us to assess the composition and size distribution of circumstellar dust, to probe recent dynamical histories, and to directly detect and characterize embedded exoplanets. Observations of these systems in the infrared beyond 2--3 $\mu$m promise access to both extremely favorable planet contrasts and numerous scattered-light spectral features -- but have typically been inhibited by the brightness of the sky at these wavelengths. We present coronagraphy of the AU Microscopii (AU Mic) system using JWST's Near Infrared Camera (NIRCam) in two filters spanning 3--5 $\mu$m. These data provide the first images of the system's famous debris disk at these wavelengths and permit additional constraints on its properties and morphology. Conducting a deep search for companions in these data, we do not identify any compelling candidates. However, with sensitivity sufficient to recover planets as small as $\sim 0.1$ Jupiter masses beyond $\sim 2^{\prime\prime}$ ($\sim 20$ au) with $5\sigma$ confidence, these data place significant constraints on any massive companions that might still remain at large separations and provide additional context for the compact, multi-planet system orbiting very close-in. The observations presented here highlight NIRCam's unique capabilities for probing similar disks in this largely unexplored wavelength range, and provide the deepest direct imaging constraints on wide-orbit giant planets in this very well studied benchmark system.

astro-ph.EP↗

arXiv2022

JWST/NIRCam Coronagraphy: Commissioning and First On-Sky Results

In a cold and stable space environment, the James Webb Space Telescope (JWST or "Webb") reaches unprecedented sensitivities at wavelengths beyond 2 microns, serving most fields of astrophysics. It also extends the parameter space of high-contrast imaging in the near and mid-infrared. Launched in late 2021, JWST underwent a six month commissioning period. In this contribution we focus on the NIRCam Coronagraphy mode which was declared "science ready" on July 10 2022, the last of the 17 JWST observing modes. Essentially, this mode will allow to detect fainter/redder/colder (less massive for a given age) self-luminous exoplanets as well as other faint astrophysical signal in the vicinity of any bright object (stars or galaxies). Here we describe some of the steps and hurdles the commissioning team went through to achieve excellent performances. Specifically, we focus on the Coronagraphic Suppression Verification activity. We were able to produce firm detections at 3.35$\mu$m of the white dwarf companion HD 114174 B which is at a separation of $\simeq$ 0.5" and a contrast of $\simeq$ 10 magnitudes ($10^{4}$ fainter than the K$\sim$5.3 mag host star). We compare these first on-sky images with our latest, most informed and realistic end-to-end simulations through the same pipeline. Additionally we provide information on how we succeeded with the target acquisition with all five NIRCam focal plane masks and their four corresponding wedged Lyot stops.

astro-ph.IM↗

arXiv2021

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) Technology Demonstration

The Coronagraph Instrument (CGI) on the Nancy Grace Roman Space Telescope will demonstrate the high-contrast technology necessary for visible-light exoplanet imaging and spectroscopy from space via direct imaging of Jupiter-size planets and debris disks. This in-space experience is a critical step toward future, larger missions targeted at direct imaging of Earth-like planets in the habitable zones of nearby stars. This paper presents an overview of the current instrument design and requirements, highlighting the critical hardware, algorithms, and operations being demonstrated. We also describe several exoplanet and circumstellar disk science cases enabled by these capabilities. A competitively selected Community Participation Program team will be an integral part of the technology demonstration and could perform additional CGI observations beyond the initial tech demo if the instrument performance warrants it.

astro-ph.IM↗

arXiv2020

A review of simulation and performance modeling for the Roman coronagraph instrument

The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models have been created by a variety of teams. We summarize these efforts, with a particular focus on publicly available datasets and software tools. These include speckle and point-spread-function models, signal-to-noise calculators, and science product simulations (e.g. predicted observations of debris disks and exoplanet spectra). This review is intended to serve as a reference to facilitate engagement with the technical and science capabilities of the CGI instrument.

astro-ph.EP↗

arXiv2020

The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Final Report

The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx is a space telescope with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR. These capabilities allow for a broad suite of compelling science that cuts across the entire NASA astrophysics portfolio. HabEx has three primary science goals: (1) Seek out nearby worlds and explore their habitability; (2) Map out nearby planetary systems and understand the diversity of the worlds they contain; (3) Enable new explorations of astrophysical systems from our own solar system to external galaxies by extending our reach in the UV through near-IR. This Great Observatory science will be selected through a competed GO program, and will account for about 50% of the HabEx primary mission. The preferred HabEx architecture is a 4m, monolithic, off-axis telescope that is diffraction-limited at 0.4 microns and is in an L2 orbit. HabEx employs two starlight suppression systems: a coronagraph and a starshade, each with their own dedicated instrument.

astro-ph.IM↗