arXiv subjects

John M. Martinis

Publications and source records attributed to John M. Martinis.

At least 73 records · Page 4Linked to original sources

arXiv2014

Qubit architecture with high coherence and fast tunable coupling

We introduce a superconducting qubit architecture that combines high-coherence qubits and tunable qubit-qubit coupling. With the ability to set the coupling to zero, we demonstrate that this architecture is protected from the frequency crowding problems that arise from fixed coupling. More importantly, the coupling can be tuned dynamically with nanosecond resolution, making this architecture a versatile platform with applications ranging from quantum logic gates to quantum simulation. We illustrate the advantages of dynamic coupling by implementing a novel adiabatic controlled-Z gate, at a speed approaching that of single-qubit gates. Integrating coherence and scalable control, our "gmon" architecture is a promising path towards large-scale quantum computation and simulation.

cond-mat.supr-con↗

arXiv2014

Logic gates at the surface code threshold: Superconducting qubits poised for fault-tolerant quantum computing

A quantum computer can solve hard problems - such as prime factoring, database searching, and quantum simulation - at the cost of needing to protect fragile quantum states from error. Quantum error correction provides this protection, by distributing a logical state among many physical qubits via quantum entanglement. Superconductivity is an appealing platform, as it allows for constructing large quantum circuits, and is compatible with microfabrication. For superconducting qubits the surface code is a natural choice for error correction, as it uses only nearest-neighbour coupling and rapidly-cycled entangling gates. The gate fidelity requirements are modest: The per-step fidelity threshold is only about 99%. Here, we demonstrate a universal set of logic gates in a superconducting multi-qubit processor, achieving an average single-qubit gate fidelity of 99.92% and a two-qubit gate fidelity up to 99.4%. This places Josephson quantum computing at the fault-tolerant threshold for surface code error correction. Our quantum processor is a first step towards the surface code, using five qubits arranged in a linear array with nearest-neighbour coupling. As a further demonstration, we construct a five-qubit Greenberger-Horne-Zeilinger (GHZ) state using the complete circuit and full set of gates. The results demonstrate that Josephson quantum computing is a high-fidelity technology, with a clear path to scaling up to large-scale, fault-tolerant quantum circuits.

quant-ph↗

arXiv2014

Defining and detecting quantum speedup

The development of small-scale digital and analog quantum devices raises the question of how to fairly assess and compare the computational power of classical and quantum devices, and of how to detect quantum speedup. Here we show how to define and measure quantum speedup in various scenarios, and how to avoid pitfalls that might mask or fake quantum speedup. We illustrate our discussion with data from a randomized benchmark test on a D-Wave Two device with up to 503 qubits. Comparing the performance of the device on random spin glass instances with limited precision to simulated classical and quantum annealers, we find no evidence of quantum speedup when the entire data set is considered, and obtain inconclusive results when comparing subsets of instances on an instance-by-instance basis. Our results for one particular benchmark do not rule out the possibility of speedup for other classes of problems and illustrate that quantum speedup is elusive and can depend on the question posed.

quant-ph↗

arXiv2013

High Fidelity Qubit Readout with the Superconducting Low-Inductance Undulatory Galvanometer Microwave Amplifier

We describe the high fidelity dispersive measurement of a superconducting qubit using a microwave amplifier based on the Superconducting Low-inductance Undulatory Galvanometer (SLUG). The SLUG preamplifier achieves gain of 19 dB and yields a signal-to-noise ratio improvement of 9 dB over a state-of-the-art HEMT amplifier. We demonstrate a separation fidelity of 99% at 700 ns compared to 59% with the HEMT alone. The SLUG displays a large dynamic range, with an input saturation power corresponding to 700 photons in the readout cavity.

cond-mat.supr-con↗

arXiv2013

Understanding the effects of leakage in superconducting quantum error detection circuits

The majority of quantum error detection and correction protocols assume that the population in a qubit does not leak outside of its computational subspace. For many existing approaches, however, the physical qubits do possess more than two energy levels and consequently are prone to such leakage events. Analyzing the effects of leakage is therefore essential to devise optimal protocols for quantum gates, measurement, and error correction. In this work, we present a detailed study of leakage in a two-qubit superconducting stabilizer measurement circuit. We simulate the repeated ancilla-assisted measurement of a single $σ^z$ operator for a data qubit, record the outcome at the end of each measurement cycle, and explore the signature of leakage events in the obtained readout statistics. An analytic model is also developed that closely approximates the results of our numerical simulations. We find that leakage leads to destructive features in the quantum error detection scheme, making additional hardware and software protocols necessary.

quant-ph↗

arXiv2013

Catching Shaped Microwave Photons with 99.4% Absorption Efficiency

We demonstrate a high efficiency deterministic quantum receiver to convert flying qubits to logic qubits. We employ a superconducting resonator, which is driven with a shaped pulse through an adjustable coupler. For the ideal "time reversed" shape, we measure absorption and receiver fidelities at the single microwave photon level of, respectively, 99.41% and 97.4%. These fidelities are comparable with gates and measurement and exceed the deterministic quantum communication and computation fault tolerant thresholds.

quant-ph↗

arXiv2013

Reducing intrinsic decoherence in a superconducting circuit by quantum error detection

A fundamental challenge for quantum information processing is reducing the impact of environmentally-induced errors. Quantum error detection (QED) provides one approach to handling such errors, in which errors are rejected when they are detected. Here we demonstrate a QED protocol based on the idea of quantum un-collapsing, using this protocol to suppress energy relaxation due to the environment in a three-qubit superconducting circuit. We encode quantum information in a target qubit, and use the other two qubits to detect and reject errors caused by energy relaxation. This protocol improves the storage time of a quantum state by a factor of roughly three, at the cost of a reduced probability of success. This constitutes the first experimental demonstration of an algorithm-based improvement in the lifetime of a quantum state stored in a qubit.

quant-ph↗

arXiv2013

Quantum annealing with more than one hundred qubits

Quantum technology is maturing to the point where quantum devices, such as quantum communication systems, quantum random number generators and quantum simulators, may be built with capabilities exceeding classical computers. A quantum annealer, in particular, solves hard optimisation problems by evolving a known initial configuration at non-zero temperature towards the ground state of a Hamiltonian encoding a given problem. Here, we present results from experiments on a 108 qubit D-Wave One device based on superconducting flux qubits. The strong correlations between the device and a simulated quantum annealer, in contrast with weak correlations between the device and classical annealing or classical spin dynamics, demonstrate that the device performs quantum annealing. We find additional evidence for quantum annealing in the form of small-gap avoided level crossings characterizing the hard problems. To assess the computational power of the device we compare it to optimised classical algorithms.

quant-ph↗

arXiv2013

Fluctuations From Edge Defects in Superconducting Resonators

Superconducting resonators, used in astronomy and quantum computation, couple strongly to microscopic two-level defects. We monitor the microwave response of superconducting resonators and observe fluctuations in dissipation and resonance frequency. We present a unified model where the observed dissipative and dispersive effects can be explained as originating from a bath of fluctuating two-level systems. From these measurements, we quantify the number and distribution of the defects.

cond-mat.mes-hall↗

arXiv2013

Catch-Disperse-Release Readout for Superconducting Qubits

We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.

quant-ph↗

arXiv2013

Sputtered TiN films for superconducting coplanar waveguide resonators

We present a systematic study of the properties of TiN films by varying the deposition conditions in an ultra-high-vacuum reactive magnetron sputtering chamber. By increasing the deposition pressure from 2 to 9 mTorr while keeping a nearly stoichiometric composition of Ti(1-x)N(x) (x=0.5), the film resistivity increases, the dominant crystal orientation changes from (100) to (111), grain boundaries become clearer, and the strong compressive strain changes to weak tensile strain. The TiN films absorb a high concentration of contaminants including hydrogen, carbon, and oxygen when they are exposed to air after deposition. With the target-substrate distance set to 88 mm the contaminant levels increase from ~0.1% to ~10% as the pressure is increased from 2 to 9 mTorr. The contaminant concentrations also correlate with in-plane distance from the center of the substrate and increase by roughly two orders of magnitude as the target-substrate distance is increased from 88 mm to 266 mm. These contaminants are found to strongly influence the properties of TiN films. For instance, the resistivity of stoichiometric films increases by around a factor of 5 as the oxygen content increases from 0.1% to 11%. These results suggest that the sputtered TiN particle energy is critical in determining the TiN film properties, and that it is important to control this energy to obtain high-quality TiN films. Superconducting coplanar waveguide resonators made from a series of nearly stoichiometric films grown at pressures from 2 mTorr to 7 mTorr show an increase in intrinsic quality factor from ~10^4 to ~10^6 as the magnitude of the compressive strain decreases from nearly 3800 MPa to approximately 150 MPa and the oxygen content increases from 0.1% to 8%. The films with a higher oxygen content exhibit lower loss, but the nonuniformity of the oxygen incorporation hinders the use of sputtered TiN in larger circuits.

cond-mat.supr-con↗

arXiv2013

Comment on: "Classical signature of quantum annealing"

In a recent preprint (arXiv:1305.4904) entitled "Classical signature of quantum annealing" Smolin and Smith point out that a bimodal distribution presented in (arXiv:1304.4595) for the success probability in the D-Wave device does not in itself provide sufficient evidence for quantum annealing, by presenting a classical model that also exhibits bimodality. Here we analyze their model and in addition present a similar model derived from the semi-classical limit of quantum spin dynamics, which also exhibits a bimodal distribution. We find that in both cases the correlations between the success probabilities of these classical models and the D-Wave device are weak compared to the correlations between a simulated quantum annealer and the D-Wave device. Indeed, the evidence for quantum annealing presented in arXiv:1304.4595 is not limited to the bimodality, but relies in addition on the success probability correlations between the D-Wave device and the simulated quantum annealer. The Smolin-Smith model and our semi-classical spin model both fail this correlation test.

quant-ph↗

arXiv2013

Excitation of superconducting qubits from hot non-equilibrium quasiparticles

Superconducting qubits probe environmental defects such as non-equilibrium quasiparticles, an important source of decoherence. We show that "hot" non-equilibrium quasiparticles, with energies above the superconducting gap, affect qubits differently from quasiparticles at the gap, implying qubits can probe the dynamic quasiparticle energy distribution. For hot quasiparticles, we predict a non-neligable increase in the qubit excited state probability P_e. By injecting hot quasiparticles into a qubit, we experimentally measure an increase of P_e in semi-quantitative agreement with the model and rule out the typically assumed thermal distribution.

cond-mat.supr-con↗

arXiv2013

Coherent Josephson qubit suitable for scalable quantum integrated circuits

We demonstrate a planar, tunable superconducting qubit with energy relaxation times up to 44 microseconds. This is achieved by using a geometry designed to both minimize radiative loss and reduce coupling to materials-related defects. At these levels of coherence, we find a fine structure in the qubit energy lifetime as a function of frequency, indicating the presence of a sparse population of incoherent, weakly coupled two-level defects. This is supported by a model analysis as well as experimental variations in the geometry. Our `Xmon' qubit combines facile fabrication, straightforward connectivity, fast control, and long coherence, opening a viable route to constructing a chip-based quantum computer.

quant-ph↗

arXiv2013

High-fidelity CZ gate for resonator-based superconducting quantum computers

A possible building block for a scalable quantum computer has recently been demonstrated [M. Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a CZ operation between a qubit and the bus. The CZ gate is implemented with the aid of the non-computational qubit |2> state [F. W. Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus CZ gate with 99.9% (99.99%) fidelity in about 17ns (23ns) with a realistic two-parameter pulse profile, plus two auxiliary z rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multi-qubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus CZ gate as a function of qubit anharmonicity, indentify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit CZ gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a 99.9% CZ gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.

quant-ph↗

arXiv2012

Surface codes: Towards practical large-scale quantum computation

This article provides an introduction to surface code quantum computing. We first estimate the size and speed of a surface code quantum computer. We then introduce the concept of the stabilizer, using two qubits, and extend this concept to stabilizers acting on a two-dimensional array of physical qubits, on which we implement the surface code. We next describe how logical qubits are formed in the surface code array and give numerical estimates of their fault-tolerance. We outline how logical qubits are physically moved on the array, how qubit braid transformations are constructed, and how a braid between two logical qubits is equivalent to a controlled-NOT. We then describe the single-qubit Hadamard, S and T operators, completing the set of required gates for a universal quantum computer. We conclude by briefly discussing physical implementations of the surface code. We include a number of appendices in which we provide supplementary information to the main text.

quant-ph↗

arXiv2012

Multiplexed dispersive readout of superconducting phase qubits

We introduce a frequency-multiplexed readout scheme for superconducting phase qubits. Using a quantum circuit with four phase qubits, we couple each qubit to a separate lumped-element superconducting readout resonator, with the readout resonators connected in parallel to a single measurement line. The readout resonators and control electronics are designed so that all four qubits can be read out simultaneously using frequency multiplexing on the one measurement line. This technology provides a highly efficient and compact means for reading out multiple qubits, a significant advantage for scaling up to larger numbers of qubits.

cond-mat.supr-con↗

arXiv2012

Direct Wigner tomography of a superconducting anharmonic oscillator

The analysis of wave-packet dynamics may be greatly simplified when viewed in phase-space. While harmonic oscillators are often used as a convenient platform to study wave-packets, arbitrary state preparation in these systems is more challenging. Here, we demonstrate a direct measurement of the Wigner distribution of complex photon states in an anharmonic oscillator - a superconducting phase circuit, biased in the small anharmonicity regime. We test our method on both non-classical states composed of two energy eigenstates and on the dynamics of a phase-locked wavepacket. This method requires a simple calibration, and is easily applicable in our system out to the fifth level.

quant-ph↗