arXiv subjects

John Moon

Publications and source records attributed to John Moon.

6 recordsLinked to original sources

arXiv2026

Memristive tabular variational autoencoder for compression of analog data in high energy physics

We present an implementation of edge AI to compress data on an in-memory analog content-addressable memory (ACAM) device. A variational autoencoder is trained on a simulated sample of energy measurements from incident high-energy electrons on a generic three-layer scintillator-based calorimeter. The encoding part is distilled into tabular format by regressing the latent space variables using decision trees, which is then programmed on a memristor-based ACAM. In real-time, the ACAM compresses 48 continuously valued incoming energies measured by the calorimeter sensors into the latent space, achieving a compression factor of 12x, which is transmitted off-detector for decompression. The performance result of the ACAM, obtained using the Structural Simulation Toolkit, the SST open source framework, gives a latency value of 24 ns and a throughput of 330M compressions per second, i.e., 3 ns between successive inputs, and an average energy consumption of 4.1 nJ per compression.

physics.ins-det↗

arXiv2025

NL-DPE: An Analog In-memory Non-Linear Dot Product Engine for Efficient CNN and LLM Inference

Resistive Random Access Memory (RRAM) based in-memory computing (IMC) accelerators offer significant performance and energy advantages for deep neural networks (DNNs), but face three major limitations: (1) they support only \textit{static} dot-product operations and cannot accelerate arbitrary non-linear functions or data-dependent multiplications essential to modern LLMs; (2) they demand large, power-hungry analog-to-digital converter (ADC) circuits; and (3) mapping model weights to device conductance introduces errors from cell nonidealities. These challenges hinder scalable and accurate IMC acceleration as models grow. We propose NL-DPE, a Non-Linear Dot Product Engine that overcomes these barriers. NL-DPE augments crosspoint arrays with RRAM-based Analog Content Addressable Memory (ACAM) to execute arbitrary non-linear functions and data-dependent matrix multiplications in the analog domain by transforming them into decision trees, fully eliminating ADCs. To address device noise, NL-DPE uses software-based Noise Aware Fine-tuning (NAF), requiring no in-device calibration. Experiments show that NL-DPE delivers 28X energy efficiency and 249X speedup over a GPU baseline, and 22X energy efficiency and 245X speedup over existing IMC accelerators, while maintaining high accuracy.

cs.AR↗

arXiv2025

Solving Boolean satisfiability problems with resistive content addressable memories

Solving optimization problems is a highly demanding workload requiring high-performance computing systems. Optimization solvers are usually difficult to parallelize in conventional digital architectures, particularly when stochastic decisions are involved. Recently, analog computing architectures for accelerating stochastic optimization solvers have been presented, but they were limited to academic problems in quadratic polynomial format. Here we present KLIMA, a k-Local In-Memory Accelerator with resistive Content Addressable Memories (CAMs) and Dot-Product Engines (DPEs) to accelerate the solution of high-order industry-relevant optimization problems, in particular Boolean Satisfiability. By co-designing the optimization heuristics and circuit architecture we improve the speed and energy to solution up to 182x compared to the digital state of the art.

cs.ET↗

arXiv2023

RACE-IT: A Reconfigurable Analog Computing Engine for In-Memory Transformer Acceleration

Transformer models represent the cutting edge of Deep Neural Networks (DNNs) and excel in a wide range of machine learning tasks. However, processing these models demands significant computational resources and results in a substantial memory footprint. While In-memory Computing (IMC)offers promise for accelerating Vector-Matrix Multiplications(VMMs) with high computational parallelism and minimal data movement, employing it for other crucial DNN operators remains a formidable task. This challenge is exacerbated by the extensive use of complex activation functions, Softmax, and data-dependent matrix multiplications (DMMuls) within Transformer models. To address this challenge, we introduce a Reconfigurable Analog Computing Engine (RACE) by enhancing Analog Content Addressable Memories (ACAMs) to support broader operations. Based on the RACE, we propose the RACE-IT accelerator (meaning RACE for In-memory Transformers) to enable efficient analog-domain execution of all core operations of Transformer models. Given the flexibility of our proposed RACE in supporting arbitrary computations, RACE-IT is well-suited for adapting to emerging and non-traditional DNN architectures without requiring hardware modifications. We compare RACE-IT with various accelerators. Results show that RACE-IT increases performance by 453x and 15x, and reduces energy by 354x and 122x over the state-of-the-art GPUs and existing Transformer-specific IMC accelerators, respectively.

cs.AR↗

arXiv2023

X-TIME: An in-memory engine for accelerating machine learning on tabular data with CAMs

Structured, or tabular, data is the most common format in data science. While deep learning models have proven formidable in learning from unstructured data such as images or speech, they are less accurate than simpler approaches when learning from tabular data. In contrast, modern tree-based Machine Learning (ML) models shine in extracting relevant information from structured data. An essential requirement in data science is to reduce model inference latency in cases where, for example, models are used in a closed loop with simulation to accelerate scientific discovery. However, the hardware acceleration community has mostly focused on deep neural networks and largely ignored other forms of machine learning. Previous work has described the use of an analog content addressable memory (CAM) component for efficiently mapping random forests. In this work, we develop an analog-digital architecture that implements a novel increased precision analog CAM and a programmable chip for inference of state-of-the-art tree-based ML models, such as XGBoost, CatBoost, and others. Thanks to hardware-aware training, X-TIME reaches state-of-the-art accuracy and 119x higher throughput at 9740x lower latency with >150x improved energy efficiency compared with a state-of-the-art GPU for models with up to 4096 trees and depth of 8, with a 19W peak power consumption.

cs.LG↗

arXiv2021

Hierarchical Architectures in Reservoir Computing Systems

Reservoir computing (RC) offers efficient temporal data processing with a low training cost by separating recurrent neural networks into a fixed network with recurrent connections and a trainable linear network. The quality of the fixed network, called reservoir, is the most important factor that determines the performance of the RC system. In this paper, we investigate the influence of the hierarchical reservoir structure on the properties of the reservoir and the performance of the RC system. Analogous to deep neural networks, stacking sub-reservoirs in series is an efficient way to enhance the nonlinearity of data transformation to high-dimensional space and expand the diversity of temporal information captured by the reservoir. These deep reservoir systems offer better performance when compared to simply increasing the size of the reservoir or the number of sub-reservoirs. Low frequency components are mainly captured by the sub-reservoirs in later stage of the deep reservoir structure, similar to observations that more abstract information can be extracted by layers in the late stage of deep neural networks. When the total size of the reservoir is fixed, tradeoff between the number of sub-reservoirs and the size of each sub-reservoir needs to be carefully considered, due to the degraded ability of individual sub-reservoirs at small sizes. Improved performance of the deep reservoir structure alleviates the difficulty of implementing the RC system on hardware systems.

cs.ET↗