SearcharxivSearch

arXiv subjects

John S. Thompson

Publications and source records attributed to John S. Thompson.

17 recordsLinked to original sources

Target Sensing Performance in Disaster-Specific ISAC Networks

As sixth-generation (6G) wireless technology emerges, integrated sensing and communication (ISAC) networks offer significant potential for enhancing real-time monitoring in disaster areas. However, existing ISAC approaches often fail to address the unique challenges of dynamic and cluttered disaster areas, resulting in limited sensing coverage and interruptions in sensing service. To address these limitations, this work proposes a mobile ISAC network specifically designed for disaster scenarios. By leveraging stochastic geometry, we derive closed-form expressions for sensing coverage and introduce a novel performance metric to evaluate sensing service continuity. Simulation results validate the analytical derivations and offer key insights into network design.

eess.SY

Analysis of Joint Radar and Communication in Disaster Scenarios

With the increasing frequency and intensity of natural disasters, there is a necessity for advanced technologies that can provide reliable situational awareness and communication. Conventional systems are often inadequate due to unreliable infrastructure, power grid failures, high investment costs and scalability challenges. This paper explores the potential of ad-hoc mesh joint radar and communication (JRC) networks as a scalable, resilient, energy-efficient solution for disaster management that can operate independently of conventional infrastructure. The proposed JRC network enhances disaster response by integrating target detection (such as identifying vital signs, hazardous leaks, and fires) with communication capabilities to ensure efficient information dissemination under intense clutter conditions. Key performance metrics, including data rate, Signal-to-Clutter and Noise Ratio (SCNR), probability of detection, and false alarm rate, are used to assess performance. An optimization approach is proposed to provide an energy-efficient resource allocation scheme. The results show the performance of ad-hoc mesh JRC systems, underscoring their potential to enhance disaster management efforts by addressing unique operational challenges.

eess.SY

Adaptive Implicit-Based Deep Learning Channel Estimation for 6G Communications

With the widespread deployment of fifth-generation (5G) wireless networks, research on sixth-generation (6G) technology is gaining momentum. Artificial Intelligence (AI) is anticipated to play a significant role in 6G, particularly through integration with the physical layer for tasks such as channel estimation. Considering resource limitations in real systems, the AI algorithm should be designed to have the ability to balance the accuracy and resource consumption according to the scenarios dynamically. However, conventional explicit multilayer-stacked Deep Learning (DL) models struggle to adapt due to their heavy reliance on the structure of deep neural networks. This article proposes an adaptive Implicit-layer DL Channel Estimation Network (ICENet) with a lightweight framework for vehicle-to-everything communications. This novel approach balances computational complexity and channel estimation accuracy by dynamically adjusting computational resources based on input data conditions, such as channel quality. Unlike explicit multilayer-stacked DL-based channel estimation models, ICENet offers a flexible framework, where specific requirements can be achieved by adaptively changing the number of iterations of the iterative layer. Meanwhile, ICENet requires less memory while maintaining high performance. The article concludes by highlighting open research challenges and promising future research directions.

cs.IT

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.

eess.SP

Beam Entropy of 5G Cellular Millimetre-Wave Channels

In this paper, we obtain and study typical beam entropy values for millimetre wave (mm-wave) channel models using the NYUSIM simulator for frequencies up to 100 GHz for fifth generation (5G) and beyond 5G cellular communication systems. The beam entropy is used to quantify sparse MIMO channel randomness in beamspace. Lower relative beam entropy channels are suitable for memory-assisted statistically-ranked (MarS) and hybrid radio frequency (RF) beam training algorithms. High beam entropies can potentially be advantageous for low overhead secured radio communications by generating cryptographic keys based on channel randomness in beamspace, especially for sparse multiple input multiple output (MIMO) channels. Urban micro (UMi), urban macro (UMa) and rural macro (RMa) cellular scenarios have been investigated in this work for 28, 60, 73 and 100 GHz.

eess.SP

Memory-assisted Statistically-ranked RF Beam Training Algorithm for Sparse MIMO

This paper presents a novel radio frequency (RF) beam training algorithm for sparse multiple input multiple output (MIMO) channels using unitary RF beamforming codebooks at transmitter (Tx) and receiver (Rx). The algorithm leverages statistical knowledge from past beam data for expedited beam search with statistically-minimal training overheads. Beams are tested in the order of their ranks based on their probabilities for providing a communication link. For low beam entropy scenarios, statistically-ranked beam search performs excellent in reducing the average number of beam tests per Tx-Rx beam pair identification for a communication link. For high beam entropy cases, a hybrid algorithm involving both memory-assisted statistically-ranked (MarS) beam search and multi-level (ML) beam search is also proposed. Savings in training overheads increase with decrease in beam entropy and increase in MIMO channel dimensions.

cs.IT

DELMU: A Deep Learning Approach to Maximising the Utility of Virtualised Millimetre-Wave Backhauls

Advances in network programmability enable operators to 'slice' the physical infrastructure into independent logical networks. By this approach, each network slice aims to accommodate the demands of increasingly diverse services. However, precise allocation of resources to slices across future 5G millimetre-wave backhaul networks, to optimise the total network utility, is challenging. This is because the performance of different services often depends on conflicting requirements, including bandwidth, sensitivity to delay, or the monetary value of the traffic incurred. In this paper, we put forward a general rate utility framework for slicing mm-wave backhaul links, encompassing all known types of service utilities, i.e. logarithmic, sigmoid, polynomial, and linear. We then introduce DELMU, a deep learning solution that tackles the complexity of optimising non-convex objective functions built upon arbitrary combinations of such utilities. Specifically, by employing a stack of convolutional blocks, DELMU can learn correlations between traffic demands and achievable optimal rate assignments. We further regulate the inferences made by the neural network through a simple 'sanity check' routine, which guarantees both flow rate admissibility within the network's capacity region and minimum service levels. The proposed method can be trained within minutes, following which it computes rate allocations that match those obtained with state-of-the-art global optimisation algorithms, yet orders of magnitude faster. This confirms the applicability of DELMU to highly dynamic traffic regimes and we demonstrate up to 62% network utility gains over a baseline greedy approach.

cs.NI

Full-Duplex Non-Orthogonal Multiple Access for Modern Wireless Networks

Non-orthogonal multiple access (NOMA) is an interesting concept to provide higher capacity for future wireless communications. In this article, we consider the feasibility and benefits of combining full-duplex operation with NOMA for modern communication systems. Specifically, we provide a comprehensive overview on application of full-duplex NOMA in cellular networks, cooperative and cognitive radio networks, and characterize gains possible due to full-duplex operation. Accordingly, we discuss challenges, particularly the self-interference and inter-user interference and provide potential solutions to interference mitigation and quality-of-service provision based on beamforming, power control, and link scheduling. We further discuss future research challenges and interesting directions to pursue to bring full-duplex NOMA into maturity and use in practice.

eess.SP

Semi-dynamic Green Resource Management in Downlink Heterogeneous Networks by Group Sparse Power Control

This paper addresses the energy-saving problem for the downlink of heterogeneous networks, which aims at minimizing the total base stations (BSs) power consumption while each user's rate requirement is supported. The basic idea of this work is to make use of the flexibility and scalability of the system such that more benefits can be gained by efficient resource management. This motivates us to propose a flexible BS power consumption model, which can control system resources, such as antennas, frequency carriers and transmit power allocation in an energy efficient manner rather than the "on/off" binary sleep mode for BSs. To denote these power-saving modes, we employ the group sparsity of the transmit power vector instead of the {0, 1} variables. Based on this power model, a semi-dynamic green resource management mechanism is proposed, which can jointly solve a series of resource management problems, including BS association, frequency carriers (FCs) assignment, and the transmit power allocation, by group sparse power control based on the large scale fading values. In particular, the successive convex approximation (SCA)-based algorithm is applied to solve a stationary solution to the original non-convex problem. Simulation results also verify the proposed BS power model and the green resource management mechanism.

cs.IT

Base Station Sleeping and Resource Allocation in Renewable Energy Powered Cellular Networks

We consider energy-efficient wireless resource management in cellular networks where BSs are equipped with energy harvesting devices, using statistical information for traffic intensity and harvested energy. The problem is formulated as adapting BSs' on-off states, active resource blocks (e.g. subcarriers) as well as power allocation to minimize the average grid power consumption in a given time period while satisfying the users' quality of service (blocking probability) requirements. It is transformed into an unconstrained optimization problem to minimize a weighted sum of grid power consumption and blocking probability. A two-stage dynamic programming (DP) algorithm is then proposed to solve this optimization problem, by which the BSs' on-off states are optimized in the first stage, and the active BS's resource blocks are allocated iteratively in the second stage. Compared with the optimal joint BSs' on-off states and active resource blocks allocation algorithm, the proposed algorithm greatly reduces the computational complexity, while at the same time achieves close to the optimal energy saving performance.

cs.IT

Practical Analysis of Codebook Design and Frequency Offset Estimation for Virtual-MIMO Systems

A virtual multiple-input multiple-output (MIMO) wireless system using the receiver-side cooperation with the compress-and-forward (CF) protocol, is an alternative to a point-to-point MIMO system, when a single receiver is not equipped with multiple antennas. It is evident that the practicality of CF cooperation will be greatly enhanced if an efficient source coding technique can be used at the relay. It is even more desirable that CF cooperation should not be unduly sensitive to carrier frequency offsets (CFOs). This paper presents a practical study of these two issues. Firstly, codebook designs of the Voronoi vector quantization (VQ) and the tree-structure vector quantization (TSVQ) to enable CF cooperation at the relay are described. A comparison in terms of the codebook design and encoding complexity is analyzed. It is shown that the TSVQ is much simpler to design and operate, and can achieve a favorable performance-complexity tradeoff. Furthermore, this paper demonstrates that CFO can lead to significant performance degradation for the virtual MIMO system. To overcome this, it is proposed to maintain clock synchronization and jointly estimate the CFO between the relay and the destination. This approach is shown to provide a significant performance improvement.

cs.IT

Relaying Technologies for Smart Grid Communications

Wireless technologies can support a broad range of smart grid applications including advanced metering infrastructure (AMI) and demand response (DR). However, there are many formidable challenges when wireless technologies are applied to the smart gird, e.g., the tradeoffs between wireless coverage and capacity, the high reliability requirement for communication, and limited spectral resources. Relaying has emerged as one of the most promising candidate solutions for addressing these issues. In this article, an introduction to various relaying strategies is presented, together with a discussion of how to improve spectral efficiency and coverage in relay-based information and communications technology (ICT) infrastructure for smart grid applications. Special attention is paid to the use of unidirectional relaying, collaborative beamforming, and bidirectional relaying strategies.

cs.IT

Compressive and Noncompressive Power Spectral Density Estimation from Periodic Nonuniform Samples

This paper presents a novel power spectral density estimation technique for band-limited, wide-sense stationary signals from sub-Nyquist sampled data. The technique employs multi-coset sampling and incorporates the advantages of compressed sensing (CS) when the power spectrum is sparse, but applies to sparse and nonsparse power spectra alike. The estimates are consistent piecewise constant approximations whose resolutions (width of the piecewise constant segments) are controlled by the periodicity of the multi-coset sampling. We show that compressive estimates exhibit better tradeoffs among the estimator's resolution, system complexity, and average sampling rate compared to their noncompressive counterparts. For suitable sampling patterns, noncompressive estimates are obtained as least squares solutions. Because of the non-negativity of power spectra, compressive estimates can be computed by seeking non-negative least squares solutions (provided appropriate sampling patterns exist) instead of using standard CS recovery algorithms. This flexibility suggests a reduction in computational overhead for systems estimating both sparse and nonsparse power spectra because one algorithm can be used to compute both compressive and noncompressive estimates.

cs.IT

Reconciling Compressive Sampling Systems for Spectrally-sparse Continuous-time Signals

The Random Demodulator (RD) and the Modulated Wideband Converter (MWC) are two recently proposed compressed sensing (CS) techniques for the acquisition of continuous-time spectrally-sparse signals. They extend the standard CS paradigm from sampling discrete, finite dimensional signals to sampling continuous and possibly infinite dimensional ones, and thus establish the ability to capture these signals at sub-Nyquist sampling rates. The RD and the MWC have remarkably similar structures (similar block diagrams), but their reconstruction algorithms and signal models strongly differ. To date, few results exist that compare these systems, and owing to the potential impacts they could have on spectral estimation in applications like electromagnetic scanning and cognitive radio, we more fully investigate their relationship in this paper. We show that the RD and the MWC are both based on the general concept of random filtering, but employ significantly different sampling functions. We also investigate system sensitivities (or robustness) to sparse signal model assumptions. Lastly, we show that "block convolution" is a fundamental aspect of the MWC, allowing it to successfully sample and reconstruct block-sparse (multiband) signals. Based on this concept, we propose a new acquisition system for continuous-time signals whose amplitudes are block sparse. The paper includes detailed time and frequency domain analyses of the RD and the MWC that differ, sometimes substantially, from published results.

cs.IT

Cooperative Multiplexing: Toward Higher Spectral Efficiency in Multi-antenna Relay Networks

Previous work on cooperative communications has concentrated primarily on the diversity benefits of such techniques. This paper, instead, considers the multiplexing benefits of cooperative communications. First, a new interpretation on the fundamental tradeoff between the transmission rate and outage probability in multi-antenna relay networks is given. It follows that multiplexing gains can be obtained at any finite SNR, in full-duplex multi-antenna relay networks. Thus relaying can offer not only stronger link reliability, but also higher spectral efficiency. Specifically, the decode-and-forward protocol is applied and networks that have one source, one destination, and multiple relays are considered. A receive power gain at the relays, which captures the network large scale fading characteristics, is also considered. It is shown that this power gain can significantly affect the system diversity-multiplexing tradeoff for any finite SNR value. Several relaying protocols are proposed and are shown to offer nearly the same outage probability as if the transmit antennas at the source and the relay(s) were co-located, given certain SNR and receive power gains at the relays. Thus a higher multiplexing gain than that of the direct link can be obtained if the destination has more antennas than the source. Much of the analysis in the paper is valid for arbitrary channel fading statistics. These results point to a view of relay networks as a means for providing higher spectral efficiency, rather than only link reliability.

cs.IT

Superposition-Coded Concurrent Decode-and-Forward Relaying

In this paper, a superposition-coded concurrent decode-and-forward (DF) relaying protocol is presented. A specific scenario, where the inter-relay channel is sufficiently strong, is considered. Assuming perfect source-relay transmissions, the proposed scheme further improves the diversity performance of previously proposed repetition-coded concurrent DF relaying, in which the advantage of the inter-relay interference is not fully extracted.

cs.IT

Cooperative Multiplexing in a Half Duplex Relay Network: Performance and Constraints

Previous work on relay networks has concentrated primarily on the diversity benefits of such techniques. This paper explores the possibility of also obtaining multiplexing gain in a relay network, while retaining diversity gain. Specifically, consider a network in which a single source node is equipped with one antenna and a destination is equipped with two antennas. It is shown that, in certain scenarios, by adding a relay with two antennas and using a successive relaying protocol, the diversity multiplexing tradeoff performance of the network can be lower bounded by that of a 2 by 2 MIMO channel, when the decode-and-forward protocol is applied at the relay. A distributed D-BLAST architecture is developed, in which parallel channel coding is applied to achieve this tradeoff. A space-time coding strategy, which can bring a maximal multiplexing gain of more than one, is also derived for this scenario. As will be shown, while this space-time coding strategy exploits maximal diversity for a small multiplexing gain, the proposed successive relaying scheme offers a significant performance advantage for higher data rate transmission. In addition to the specific results shown here, these ideas open a new direction for exploiting the benefits of wireless relay networks.

cs.IT