arXiv subjects

John W. Hartley

Publications and source records attributed to John W. Hartley.

12 recordsLinked to original sources

arXiv2026

Multi-sensor fusion for fine-guidance and milliarcsecond-level attitude estimation of balloon-borne telescope

Balloon-borne telescopes rely on fine-guidance systems to achieve milliarcsecond image stability despite residual disturbances from the balloon environment. In these systems, the Fast Steering Mirror (FSM) stabilizes the image in two focal-plane axes, but leaves systematic, field-dependent residual motion induced by boresight roll. This effect, referred to as roll leakage, becomes more important for wider fields of view. In this work, roll leakage is characterized using data from the 2023 Superpressure Balloon-borne Imaging Telescope (SuperBIT) science flight. SuperBIT is a 0.5-m near-ultraviolet to near-infrared telescope that demonstrated milliarcsecond-level image stability during its 45-night science flight. We find that passive focal-plane star-camera measurements correlate strongly with independent roll measurements across a large set of science exposures, showing that boresight roll frequently drives residual focal-plane motion. We then develop a simulation framework combining optical ray tracing, asynchronous guide-star measurements, estimation, and FSM control to study this behavior. The framework is used to compare single-star and multi-star guidance architectures under realistic flight disturbances. For the SuperBIT geometry, we find that multi-star estimation reduces average roll-induced science-field image motion by 31.8%, increasing to 77.4% for a representative geometry of GigaBIT, SuperBIT's planned larger-aperture successor. These results motivate further investigation of multi-star fine-guidance architectures for GigaBIT.

astro-ph.IM↗

arXiv2026

Lensing in the Blue III: Weak Lensing Shape Catalogs of 30 Merging Galaxy Clusters

We present the weak gravitational lensing dataset from the Super-pressure Balloon-Borne Imaging Telescope (SuperBIT), which imaged 30 galaxy clusters during its 45 night flight in April to May 2023. SuperBIT is a first-of-its-kind balloon-borne imaging telescope that achieved near diffraction-limited observations in near-space conditions above 98% of the Earth's atmosphere. We use the metacalibration algorithm to obtain calibrated galaxy shapes for our target clusters and several calibration fields, enabling unbiased reconstruction of the weak-lensing signal. We employ several diagnostics throughout the pipeline, including assessments of point-spread function (PSF) modeling residuals and their impact on weak-lensing measurements, as well as tests for correlations between galaxy shapes and measured galaxy and PSF properties. To assess the multiplicative shear bias of the pipeline, we analyze a parallel set of simulated images that incorporate the real observing conditions from the flight, including measured SuperBIT PSFs, observed sky backgrounds, and detector noise, yielding a bias of $(1.1 \pm 7.8)$~per~cent.

astro-ph.CO↗

arXiv2024

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat

We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.

physics.ins-det↗

arXiv2024

SuperBIT Superpressure Flight Instrument Overview and Performance: Near diffraction-limited Astronomical Imaging from the Stratosphere

SuperBIT was a 0.5-meter near-ultraviolet to near-infrared wide-field telescope that launched on a NASA superpressure balloon into the stratosphere from New Zealand for a 45-night flight. SuperBIT acquired multi-band images of galaxy clusters to study the properties of dark matter using weak gravitational lensing. We provide an overview of the instrument and its various subsystems. We then present the instrument performance from the flight, including the telescope and image stabilization system, the optical system, the power system, and the thermal system. SuperBIT successfully met the instrument's technical requirements, achieving a telescope pointing stability of 0.34 +/- 0.10 arcseconds, a focal plane image stability of 0.055 +/- 0.027 arcseconds, and a PSF FWHM of ~ 0.35 arcseconds over 5-minute exposures throughout the 45-night flight. The telescope achieved a near-diffraction limited point-spread function in all three science bands (u, b, and g). SuperBIT served as a pathfinder to the GigaBIT observatory, which will be a 1.34-meter near-ultraviolet to near-infrared balloon-borne telescope.

astro-ph.IM↗

arXiv2024

From SuperBIT to GigaBIT: Informing next-generation balloon-borne telescope design with Fine Guidance System flight data

The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a near-diffraction-limited 0.5m telescope that launched via NASA's super-pressure balloon technology on April 16, 2023. SuperBIT achieved precise pointing control through the use of three nested frames in conjunction with an optical Fine Guidance System (FGS), resulting in an average image stability of 0.055" over 300-second exposures. The SuperBIT FGS includes a tip-tilt fast-steering mirror that corrects for jitter on a pair of focal plane star cameras. In this paper, we leverage the empirical data from SuperBIT's successful 45-night stratospheric mission to inform the FGS design for the next-generation balloon-borne telescope. The Gigapixel Balloon-borne Imaging Telescope (GigaBIT) is designed to be a 1.35m wide-field, high resolution imaging telescope, with specifications to extend the scale and capabilities beyond those of its predecessor SuperBIT. A description and analysis of the SuperBIT FGS will be presented along with methodologies for extrapolating this data to enhance GigaBIT's FGS design and fine pointing control algorithm. We employ a systems engineering approach to outline and formalize the design constraints and specifications for GigaBIT's FGS. GigaBIT, building on the SuperBIT legacy, is set to enhance high-resolution astronomical imaging, marking a significant advancement in the field of balloon-borne telescopes.

astro-ph.IM↗

arXiv2024

Instrument Overview of Taurus: A Balloon-borne CMB and Dust Polarization Experiment

Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($τ$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the $ΛCDM$ model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA's super-pressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100 mK transition edge sensor bolometers distributed across two low-frequency (150, 220 GHz) and one high-frequency (280, 350 GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.

astro-ph.IM↗

arXiv2023

Data downloaded via parachute from a NASA super-pressure balloon

In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing.

astro-ph.IM↗

arXiv2020

Optical night sky brightness measurements from the stratosphere

This paper presents optical night sky brightness measurements from the stratosphere using CCD images taken with the Super-pressure Balloon-borne Imaging Telescope (SuperBIT). The data used for estimating the backgrounds were obtained during three commissioning flights in 2016, 2018, and 2019 at altitudes ranging from 28 km to 34 km above sea level. For a valid comparison of the brightness measurements from the stratosphere with measurements from mountain-top ground-based observatories (taken at zenith on the darkest moonless night at high Galactic and high ecliptic latitudes), the stratospheric brightness levels were zodiacal light and diffuse Galactic light subtracted, and the airglow brightness was projected to zenith. The stratospheric brightness was measured around 5.5 hours, 3 hours, and 2 hours before the local sunrise time in 2016, 2018, and 2019 respectively. The $B$, $V$, $R$, and $I$ brightness levels in 2016 were 2.7, 1.0, 1.1, and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $B$, $V$, and $R$ brightness levels in 2018 were 1.3, 1.0, and 1.3 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The $U$ and $I$ brightness levels in 2019 were 0.1 mag arcsec$^{-2}$ brighter than the darkest ground-based measurements, whereas the $B$ and $V$ brightness levels were 0.8 and 0.6 mag arcsec$^{-2}$ darker than the darkest ground-based measurements. The lower sky brightness levels, stable photometry, and lower atmospheric absorption make stratospheric observations from a balloon-borne platform a unique tool for astronomy. We plan to continue this work in a future mid-latitude long duration balloon flight with SuperBIT.

astro-ph.IM↗

arXiv2019

Robust diffraction-limited NIR-to-NUV wide-field imaging from stratospheric balloon-borne platforms -- SuperBIT science telescope commissioning flight & performance

At a fraction the total cost of an equivalent orbital mission, scientific balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer attractive, competitive, and effective observational capabilities -- namely space-like resolution, transmission, and backgrounds -- that are well suited for modern astronomy and cosmology. SuperBIT is a diffraction-limited, wide-field, 0.5 m telescope capable of exploiting these observing conditions in order to provide exquisite imaging throughout the near-IR to near-UV. It utilizes a robust active stabilization system that has consistently demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over multiple 1 hour observations at float. This is achieved by actively tracking compound pendulations via a three-axis gimballed platform, which provides sky-fixed telescope stability at < 500 milliarcseconds and corrects for field rotation, while employing high-bandwidth tip/tilt optics to remove residual disturbances across the science imaging focal plane. SuperBIT's performance during the 2019 commissioning flight benefited from a customized high-fidelity science-capable telescope designed with exceptional thermo- and opto-mechanical stability as well as tightly constrained static and dynamic coupling between high-rate sensors and telescope optics. At the currently demonstrated level of flight performance, SuperBIT capabilities now surpass the science requirements for a wide variety of experiments in cosmology, astrophysics and stellar dynamics.

astro-ph.IM↗

arXiv2018

Overview, design, and flight results from SuperBIT: a high-resolution, wide-field, visible-to-near-UV balloon-borne astronomical telescope

Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over a 0.5 degree field-of-view for deep exposures within the visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a wide range of balloon-borne observations, including solar and extrasolar planetary spectroscopy as well as resolved stellar populations and distant galaxies. We report on the overall payload design and instrumentation methodologies for SuperBIT as well as telescope and image stability results from two test flights. Prospects for the SuperBIT project are outlined with an emphasis on the development of a fully operational, three-month science flight from New Zealand in 2020.

astro-ph.IM↗

arXiv2016

The design and development of a high-resolution visible-to-near-UV telescope for balloon-borne astronomy: SuperBIT

Balloon-borne astronomy is unique in that it allows for a level of image stability, resolution, and optical backgrounds that are comparable to space-borne systems due to greatly reduced atmospheric interference, but at a fraction of the cost and over a significantly reduced development time-scale. Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can achieve a theoretical diffraction limited resolution of $0.01"$ from the stratosphere ($35$ - $40$ km altitude) without the need for extensive adaptive optical systems required by ground-based systems. The {\it Superpressure Balloon-borne Imaging Telescope} ("SuperBIT") is a wide-field imager designed to achieve 0.02$"$ stability over a 0.5$^\circ$ field-of-view, for deep single exposures of up to 5 minutes. SuperBIT is thus well-suited for many astronomical observations, from solar or extrasolar planetary observations, to resolved stellar populations and distant galaxies (whether to study their morphology, evolution, or gravitational lensing by foreground mass). We report SuperBIT's design and implementation, emphasizing its two-stage real-time stabilization: telescope stability to $1$ - $2"$ at the telescope level (a goal surpassed during a test flight in September 2015) and image stability down to $0.02"$ via an actuated tip-tilt mirror in the optical path (to be tested during a flight in 2016). The project is progressing toward a fully operational, three month flight from New Zealand by 2018

astro-ph.IM↗

arXiv2016

Design of 280 GHz feedhorn-coupled TES arrays for the balloon-borne polarimeter SPIDER

We describe 280 GHz bolometric detector arrays that instrument the balloon-borne polarimeter SPIDER. A primary science goal of SPIDER is to measure the large-scale B-mode polarization of the cosmic microwave background in search of the cosmic-inflation, gravitational-wave signature. 280 GHz channels aid this science goal by constraining the level of B-mode contamination from galactic dust emission. We present the focal plane unit design, which consists of a 16$\times$16 array of conical, corrugated feedhorns coupled to a monolithic detector array fabricated on a 150 mm diameter silicon wafer. Detector arrays are capable of polarimetric sensing via waveguide probe-coupling to a multiplexed array of transition-edge-sensor (TES) bolometers. The SPIDER receiver has three focal plane units at 280 GHz, which in total contains 765 spatial pixels and 1,530 polarization sensitive bolometers. By fabrication and measurement of single feedhorns, we demonstrate 14.7$^{\circ}$ FHWM Gaussian-shaped beams with $<$1% ellipticity in a 30% fractional bandwidth centered at 280 GHz. We present electromagnetic simulations of the detection circuit, which show 94% band-averaged, single-polarization coupling efficiency, 3% reflection and 3% radiative loss. Lastly, we demonstrate a low thermal conductance bolometer, which is well-described by a simple TES model and exhibits an electrical noise equivalent power (NEP) = 2.6 $\times$ 10$^{-17}$ W/$\sqrt{\mathrm{Hz}}$, consistent with the phonon noise prediction.

astro-ph.IM↗