Searcharxiv⌕ Search

arXiv subjects

Jon M. Jenkins

Publications and source records attributed to Jon M. Jenkins.

At least 343 records · Page 19Linked to original sources

Kepler-14b: A massive hot Jupiter transiting an F star in a close visual binary

We present the discovery of a hot Jupiter transiting an F star in a close visual (0.3" sky projected angular separation) binary system. The dilution of the host star's light by the nearly equal magnitude stellar companion (~ 0.5 magnitudes fainter) significantly affects the derived planetary parameters, and if left uncorrected, leads to an underestimate of the radius and mass of the planet by 10% and 60%, respectively. Other published exoplanets, which have not been observed with high-resolution imaging, could similarly have unresolved stellar companions and thus have incorrectly derived planetary parameters. Kepler-14b (KOI-98) has a period of P = 6.790 days and correcting for the dilution, has a mass of Mp = 8.40 +0.19-0.18 MJ and a radius of Rp = 1.136 +0.073-0.054 RJ, yielding a mean density of rho = 7.1 +- 1.1 g cm-3.

astro-ph.EP↗

Kepler-10c, a 2.2-Earth radius transiting planet in a multiple system

The Kepler Mission has recently announced the discovery of Kepler-10 b, the smallest exoplanet discovered to date and the first rocky planet found by the spacecraft. A second, 45-day period transit-like signal present in the photometry from the first eight months of data could not be confirmed as being caused by a planet at the time of that announcement. Here we apply the light-curve modeling technique known as BLENDER to explore the possibility that the signal might be due to an astrophysical false positive (blend). To aid in this analysis we report the observation of two transits with the Spitzer Space Telescope at 4.5 μm. When combined they yield a transit depth of 344 \pm 85 ppm that is consistent with the depth in the Kepler passband (376 \pm 9 ppm, ignoring limb darkening), which rules out blends with an eclipsing binary of a significantly different color than the target. Using these observations along with other constraints from high resolution imaging and spectroscopy we are able to exclude the vast majority of possible false positives. We assess the likelihood of the remaining blends, and arrive conservatively at a false alarm rate of 1.6 \times 10-5 that is small enough to validate the candidate as a planet (designated Kepler-10 c) with a very high level of confidence. The radius of this object is measured to be Rp = 2.227+0.052 -0.057 Earth radii. Kepler-10 c represents another example (with Kepler-9 d and Kepler-11 g) of statistical "validation" of a transiting exoplanet, as opposed to the usual "confirmation" that can take place when the Doppler signal is detected or transit timing variations are measured. It is anticipated that many of Kepler's smaller candidates will receive a similar treatment since dynamical confirmation may be difficult or impractical with the sensitivity of current instrumentation.

astro-ph.EP↗

Gravity modes as a way to distinguish between hydrogen- and helium-burning red giant stars

Red giants are evolved stars that have exhausted the supply of hydrogen in their cores and instead burn hydrogen in a surrounding shell. Once a red giant is sufficiently evolved, the helium in the core also undergoes fusion. Outstanding issues in our understanding of red giants include uncertainties in the amount of mass lost at the surface before helium ignition and the amount of internal mixing from rotation and other processes. Progress is hampered by our inability to distinguish between red giants burning helium in the core and those still only burning hydrogen in a shell. Asteroseismology offers a way forward, being a powerful tool for probing the internal structures of stars using their natural oscillation frequencies. Here we report observations of gravity-mode period spacings in red giants that permit a distinction between evolutionary stages to be made. We use high-precision photometry obtained with the Kepler spacecraft over more than a year to measure oscillations in several hundred red giants. We find many stars whose dipole modes show sequences with approximately regular period spacings. These stars fall into two clear groups, allowing us to distinguish unambiguously between hydrogen-shell-burning stars (period spacing mostly about 50 seconds) and those that are also burning helium (period spacing about 100 to 300 seconds).

astro-ph.SR↗

A First Comparison of Kepler Planet Candidates in Single and Multiple Systems

In this letter we present an overview of the rich population of systems with multiple candidate transiting planets found in the first four months of Kepler data. The census of multiples includes 115 targets that show 2 candidate planets, 45 with 3, 8 with 4, and 1 each with 5 and 6, for a total of 170 systems with 408 candidates. When compared to the 827 systems with only one candidate, the multiples account for 17 percent of the total number of systems, and a third of all the planet candidates. We compare the characteristics of candidates found in multiples with those found in singles. False positives due to eclipsing binaries are much less common for the multiples, as expected. Singles and multiples are both dominated by planets smaller than Neptune; 69 +2/-3 percent for singles and 86 +2/-5 percent for multiples. This result, that systems with multiple transiting planets are less likely to include a transiting giant planet, suggests that close-in giant planets tend to disrupt the orbital inclinations of small planets in flat systems, or maybe even to prevent the formation of such systems in the first place.

astro-ph.EP↗

Planet Occurrence within 0.25 AU of Solar-type Stars from Kepler

We report the distribution of planets as a function of planet radius (R_p), orbital period (P), and stellar effective temperature (Teff) for P < 50 day orbits around GK stars. These results are based on the 1,235 planets (formally "planet candidates") from the Kepler mission that include a nearly complete set of detected planets as small as 2 Earth radii (Re). For each of the 156,000 target stars we assess the detectability of planets as a function of R_p and P. We also correct for the geometric probability of transit, R*/a. We consider first stars within the "solar subset" having Teff = 4100-6100 K, logg = 4.0-4.9, and Kepler magnitude Kp < 15 mag. We include only those stars having noise low enough to permit detection of planets down to 2 Re. We count planets in small domains of R_p and P and divide by the included target stars to calculate planet occurrence in each domain. Occurrence of planets varies by more than three orders of magnitude and increases substantially down to the smallest radius (2 Re) and out to the longest orbital period (50 days, ~0.25 AU) in our study. For P < 50 days, the radius distribution is given by a power law, df/dlogR= k R^α. This rapid increase in planet occurrence with decreasing planet size agrees with core-accretion, but disagrees with population synthesis models. We fit occurrence as a function of P to a power law model with an exponential cutoff below a critical period P_0. For smaller planets, P_0 has larger values, suggesting that the "parking distance" for migrating planets moves outward with decreasing planet size. We also measured planet occurrence over Teff = 3600-7100 K, spanning M0 to F2 dwarfs. The occurrence of 2-4 Re planets in the Kepler field increases with decreasing Teff, making these small planets seven times more abundant around cool stars than the hottest stars in our sample. [abridged]

astro-ph.EP↗

Characteristics of planetary candidates observed by Kepler, II: Analysis of the first four months of data

On 1 February 2011 the Kepler Mission released data for 156,453 stars observed from the beginning of the science observations on 2 May through 16 September 2009. There are 1235 planetary candidates with transit like signatures detected in this period. These are associated with 997 host stars. Distributions of the characteristics of the planetary candidates are separated into five class-sizes; 68 candidates of approximately Earth-size (radius < 1.25 Earth radii), 288 super-Earth size (1.25 Earth radii < radius < 2 Earth radii), 662 Neptune-size (2 Earth radii < radius < 6 Earth radii), 165 Jupiter-size (6 Earth radii < radius < 15 Earth radii), and 19 up to twice the size of Jupiter (15 Earth radii < radius < 22 Earth radii). In the temperature range appropriate for the habitable zone, 54 candidates are found with sizes ranging from Earth-size to larger than that of Jupiter. Five are less than twice the size of the Earth. Over 74% of the planetary candidates are smaller than Neptune. The observed number versus size distribution of planetary candidates increases to a peak at two to three times Earth-size and then declines inversely proportional to area of the candidate. Our current best estimates of the intrinsic frequencies of planetary candidates, after correcting for geometric and sensitivity biases, are 6% for Earth-size candidates, 7% for super-Earth size candidates, 17% for Neptune-size candidates, and 4% for Jupiter-size candidates. Multi-candidate, transiting systems are frequent; 17% of the host stars have multi-candidate systems, and 33.9% of all the candidates are part of multi-candidate systems.

astro-ph.EP↗

Kepler Eclipsing Binary Stars. II. 2165 Eclipsing Binaries in the Second Data Release

The Kepler Mission provides nearly continuous monitoring of ~156 000 objects with unprecedented photometric precision. Coincident with the first data release, we presented a catalog of 1879 eclipsing binary systems identified within the 115 square degree Kepler FOV. Here, we provide an updated catalog augmented with the second Kepler data release which increases the baseline nearly 4-fold to 125 days. 386 new systems have been added, ephemerides and principle parameters have been recomputed. We have removed 42 previously cataloged systems that are now clearly recognized as short-period pulsating variables and another 58 blended systems where we have determined that the Kepler target object is not itself the eclipsing binary. A number of interesting objects are identified. We present several exemplary cases: 4 EBs that exhibit extra (tertiary) eclipse events; and 8 systems that show clear eclipse timing variations indicative of the presence of additional bodies bound in the system. We have updated the period and galactic latitude distribution diagrams. With these changes, the total number of identified eclipsing binary systems in the Kepler field-of-view has increased to 2165, 1.4% of the Kepler target stars.

astro-ph.SR↗

KEPLER's First Rocky Planet: Kepler-10b

NASA's Kepler Mission uses transit photometry to determine the frequency of earth-size planets in or near the habitable zone of Sun-like stars. The mission reached a milestone toward meeting that goal: the discovery of its first rocky planet, Kepler-10b. Two distinct sets of transit events were detected: 1) a 152 +/- 4 ppm dimming lasting 1.811 +/- 0.024 hours with ephemeris T[BJD]=2454964.57375+N*0.837495 days and 2) a 376 +/- 9 ppm dimming lasting 6.86 +/- 0.07 hours with ephemeris T[BJD]=2454971.6761+N*45.29485 days. Statistical tests on the photometric and pixel flux time series established the viability of the planet candidates triggering ground-based follow-up observations. Forty precision Doppler measurements were used to confirm that the short-period transit event is due to a planetary companion. The parent star is bright enough for asteroseismic analysis. Photometry was collected at 1-minute cadence for >4 months from which we detected 19 distinct pulsation frequencies. Modeling the frequencies resulted in precise knowledge of the fundamental stellar properties. Kepler-10 is a relatively old (11.9 +/- 4.5 Gyr) but otherwise Sun-like Main Sequence star with Teff=5627 +/- 44 K, Mstar=0.895 +/- 0.060 Msun, and Rstar=1.056 +/- 0.021 Rsun. Physical models simultaneously fit to the transit light curves and the precision Doppler measurements yielded tight constraints on the properties of Kepler-10b that speak to its rocky composition: Mpl=4.56 +/- 1.29 Mearth, Rpl=1.416 +/- 0.036 Rearth, and density=8.8 +/- 2.9 gcc. Kepler-10b is the smallest transiting exoplanet discovered to date.

astro-ph.EP↗

The Distribution of Transit Durations for Kepler Planet Candidates and Implications for their Orbital Eccentricities

Doppler planet searches have discovered that giant planets follow orbits with a wide range of orbital eccentricities, revolutionizing theories of planet formation. The discovery of hundreds of exoplanet candidates by NASA's Kepler mission enables astronomers to characterize the eccentricity distribution of small exoplanets. Measuring the eccentricity of individual planets is only practical in favorable cases that are amenable to complementary techniques (e.g., radial velocities, transit timing variations, occultation photometry). Yet even in the absence of individual eccentricities, it is possible to study the distribution of eccentricities based on the distribution of transit durations (relative to the maximum transit duration for a circular orbit). We analyze the transit duration distribution of Kepler planet candidates. We find that for host stars with T_eff > 5100 K we cannot invert this to infer the eccentricity distribution at this time due to uncertainties and possible systematics in the host star densities. With this limitation in mind, we compare the observed transit duration distribution with models to rule out extreme distributions. If we assume a Rayleigh eccentricity distribution for Kepler planet candidates, then we find best-fits with a mean eccentricity of 0.1-0.25 for host stars with T_eff < 5100 K. We compare the transit duration distribution for different subsets of Kepler planet candidates and discuss tentative trends with planetary radius and multiplicity. High-precision spectroscopic follow-up observations for a large sample of host stars will be required to confirm which trends are real and which are the results of systematic errors in stellar radii. Finally, we identify planet candidates that must be eccentric or have a significantly underestimated stellar radius.

astro-ph.EP↗

KOI-126: A Triply-Eclipsing Hierarchical Triple with Two Low-Mass Stars

The Kepler spacecraft has been monitoring the light from 150,000 stars in its primary quest to detect transiting exoplanets. Here we report on the detection of an eclipsing stellar hierarchical triple, identified in the Kepler photometry. KOI-126 (A,(B, C)), is composed of a low-mass binary (masses M_B = 0.2413+/-0.0030 M_Sun, M_C = 0.2127+/-0.0026 M_Sun; radii R_B = 0.2543+/-0.0014 R_Sun, R_C = 0.2318+/-0.0013 R_Sun; orbital period P_1 = 1.76713+/-0.00019 days) on an eccentric orbit about a third star (mass M_A = 1.347+/-0.032 M_Sun; radius R_A = 2.0254+/-0.0098 R_Sun; period of orbit around the low-mass binary P_2 = 33.9214+/-0.0013 days; eccentricity of that orbit e_2 = 0.3043+/-0.0024). The low-mass pair probe the poorly sampled fully-convective stellar domain offering a crucial benchmark for theoretical stellar models.

astro-ph.SR↗

Kepler Eclipsing Binary Stars. I. Catalog and Principal Characterization of 1879 Eclipsing Binaries in the First Data Release

The Kepler space mission is devoted to finding Earth-size planets in habitable zones orbiting other stars. Its large, 105-deg field-of-view features over 156,000 stars that are observed continuously to detect and characterize planet transits. Yet this high-precision instrument holds great promise for other types of objects as well. Here we present a comprehensive catalog of eclipsing binary stars observed by Kepler in the first 44 days of operation, the data which are publicly available through MAST as of 6/15/2010. The catalog contains 1879 unique objects. For each object we provide its Kepler ID (KID), ephemeris (BJD0, P0), morphology type, physical parameters (Teff, log g, E(B-V), crowding), and principal parameters (T2/T1, q, fillout factor and sin i for overcontacts, and T2/T1, (R1+R2)/a, e sin(w), e cos(w), and sin i for detached binaries). We present statistics based on the determined periods and measure an average occurence rate of eclipsing binaries to be ~1.2% across the Kepler field. We further discuss the distribution of binaries as function of galactic latitude, and thoroughly explain the application of artificial intelligence to obtain principal parameters in a matter of seconds for the whole sample. The catalog was envisioned to serve as a bridge between the now public Kepler data and the scientific community interested in eclipsing binary stars.

astro-ph.SR↗

Modeling Kepler transit light curves as false positives: Rejection of blend scenarios for Kepler-9, and validation of Kepler-9d, a super-Earth-size planet in a multiple system

Light curves from the Kepler Mission contain valuable information on the nature of the phenomena producing the transit-like signals. To assist in exploring the possibility that they are due to an astrophysical false positive, we describe a procedure (BLENDER) to model the photometry in terms of a "blend" rather than a planet orbiting a star. A blend may consist of a background or foreground eclipsing binary (or star-planet pair) whose eclipses are attenuated by the light of the candidate and possibly other stars within the photometric aperture. We apply BLENDER to the case of Kepler-9, a target harboring two previously confirmed Saturn-size planets (Kepler-9b and Kepler-9c) showing transit timing variations, and an additional shallower signal with a 1.59-day period suggesting the presence of a super-Earth-size planet. Using BLENDER together with constraints from other follow-up observations we are able to rule out all blends for the two deeper signals, and provide independent validation of their planetary nature. For the shallower signal we rule out a large fraction of the false positives that might mimic the transits. The false alarm rate for remaining blends depends in part (and inversely) on the unknown frequency of small-size planets. Based on several realistic estimates of this frequency we conclude with very high confidence that this small signal is due to a super-Earth-size planet (Kepler-9d) in a multiple system, rather than a false positive. The radius is determined to be 1.64 (+0.19/-0.14) R(Earth), and current spectroscopic observations are as yet insufficient to establish its mass.

astro-ph.EP↗

Five Kepler target stars that show multiple transiting exoplanet candidates

We present and discuss five candidate exoplanetary systems identified with the Kepler spacecraft. These five systems show transits from multiple exoplanet candidates. Should these objects prove to be planetary in nature, then these five systems open new opportunities for the field of exoplanets and provide new insights into the formation and dynamical evolution of planetary systems. We discuss the methods used to identify multiple transiting objects from the Kepler photometry as well as the false-positive rejection methods that have been applied to these data. One system shows transits from three distinct objects while the remaining four systems show transits from two objects. Three systems have planet candidates that are near mean motion commensurabilities---two near 2:1 and one just outside 5:2. We discuss the implications that multitransiting systems have on the distribution of orbital inclinations in planetary systems, and hence their dynamical histories; as well as their likely masses and chemical compositions. A Monte Carlo study indicates that, with additional data, most of these systems should exhibit detectable transit timing variations (TTV) due to gravitational interactions---though none are apparent in these data. We also discuss new challenges that arise in TTV analyses due to the presence of more than two planets in a system.

astro-ph.EP↗

The Kepler Pixel Response Function

Kepler seeks to detect sequences of transits of Earth-size exoplanets orbiting Solar-like stars. Such transit signals are on the order of 100 ppm. The high photometric precision demanded by Kepler requires detailed knowledge of how the Kepler pixels respond to starlight during a nominal observation. This information is provided by the Kepler pixel response function (PRF), defined as the composite of Kepler's optical point spread function, integrated spacecraft pointing jitter during a nominal cadence and other systematic effects. To provide sub-pixel resolution, the PRF is represented as a piecewise-continuous polynomial on a sub-pixel mesh. This continuous representation allows the prediction of a star's flux value on any pixel given the star's pixel position. The advantages and difficulties of this polynomial representation are discussed, including characterization of spatial variation in the PRF and the smoothing of discontinuities between sub-pixel polynomial patches. On-orbit super-resolution measurements of the PRF across the Kepler field of view are described. Two uses of the PRF are presented: the selection of pixels for each star that maximizes the photometric signal to noise ratio for that star, and PRF-fitted centroids which provide robust and accurate stellar positions on the CCD, primarily used for attitude and plate scale tracking. Good knowledge of the PRF has been a critical component for the successful collection of high-precision photometry by Kepler.

astro-ph.EP↗

Discovery of the Transiting Planet Kepler-5b

We present 44 days of high duty cycle, ultra precise photometry of the 13th magnitude star Kepler-5 (KIC 8191672, Teff=6300 K, logg=4.1), which exhibits periodic transits with a depth of 0.7%. Detailed modeling of the transit is consistent with a planetary companion with an orbital period of 3.548460+/-0.000032 days and a radius of 1.431+/-0.050 Rj. Follow-up radial velocity measurements with the Keck HIRES spectrograph on 9 separate nights demonstrate that the planet is more than twice as massive as Jupiter with a mass of 2.114+/-0.057 and a mean density of 0.894+/-0.079 g/cm^3.

astro-ph.EP↗

Discovery and Rossiter-McLaughlin Effect of Exoplanet Kepler-8b

We report the discovery and the Rossiter-McLaughlin effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius RP = 1.419 RJ and a mass, MP = 0.60 MJ, yielding a density of 0.26 g cm^-3, among the lowest density planets known. The orbital period is P = 3.523 days and orbital semima jor axis is 0.0483+0.0006/-0.0012 AU. The star has a large rotational v sin i of 10.5 +/- 0.7 km s^-1 and is relatively faint (V = 13.89 mag), both properties deleterious to precise Doppler measurements. The velocities are indeed noisy, with scatter of 30 m s^-1, but exhibit a period and phase consistent with the planet implied by the photometry. We securely detect the Rossiter-McLaughlin effect, confirming the planet's existence and establishing its orbit as prograde. We measure an inclination between the projected planetary orbital axis and the projected stellar rotation axis of lambda = -26.9 +/- 4.6 deg, indicating a moderate inclination of the planetary orbit. Rossiter-McLaughlin measurements of a large sample of transiting planets from Kepler will provide a statistically robust measure of the true distribution of spin-orbit orientations for hot jupiters in general.

astro-ph.EP↗

Kepler Science Operations

Kepler's primary mission is a search for earth-size exoplanets in the habitable zone of late-type stars using the transit method. To effectively accomplish this mission, Kepler orbits the Sun and stares nearly continuously at one field-of-view which was carefully selected to provide an appropriate density of target stars. The data transmission rates, operational cycles, and target management requirements implied by this mission design have been optimized and integrated into a comprehensive plan for science operations. The commissioning phase completed all critical tasks and accomplished all objectives within a week of the pre-launch plan. Since starting science, the nominal data collection timeline has been interrupted by two safemode events, several losses of fine point, and some small pointing adjustments. The most important anomalies are understood and mitigated, so Kepler's technical performance metrics have improved significantly over this period and the prognosis for mission success is excellent. The Kepler data archive is established and hosting data for the science team, guest observers, and public. The first data sets to become publicly available include the monthly full-frame images, dropped targets, and individual sources as they are published. Data are released through the archive on a quarterly basis; the Kepler Results Catalog will be released annually starting in 2011.

astro-ph.EP↗

Kepler-4b: Hot Neptune-Like Planet of a G0 Star Near Main-Sequence Turnoff

Early time-series photometry from NASA's Kepler spacecraft has revealed a planet transiting the star we term Kepler-4, at RA = 19h02m27.68s, Dec = +50:08:08.7. The planet has an orbital period of 3.213 days and shows transits with a relative depth of 0.87 x 10^{-3} and a duration of about 3.95 hours. Radial velocity measurements from the Keck HIRES spectrograph show a reflex Doppler signal of 9.3 (+1.1 -1.9) m/s, consistent with a low-eccentricity orbit with the phase expected from the transits. Various tests show no evidence for any companion star near enough to affect the light curve or the radial velocities for this system. From a transit-based estimate of the host star's mean density, combined with analysis of high-resolution spectra, we infer that the host star is near turnoff from the main sequence, with estimated mass and radius of 1.223 (+0.053 -0.091) solar masses and 1.487 (+0.071 -0.084) solar radii. We estimate the planet mass and radius to be 24.5 +/- 3.8 Earth masses and 3.99 +/- 0.21 Earth radii. The planet's density is near 1.9 g/cm^3; it is thus slightly denser and more massive than Neptune, but about the same size.

astro-ph.EP↗