arXiv subjects

Jonah T. Hansen

Publications and source records attributed to Jonah T. Hansen.

13 recordsLinked to original sources

arXiv2026

Cryogenic characterisation for the Nulling Interferometry Cryogenic Experiment (NICE)

The Nulling Interferometry Cryogenic Experiment (NICE) is an experimental testbed for the beam combiner of the Large Interferometer For Exoplanets (LIFE) space mission. Until now, progress on NICE has been confined to an ambient bench, where we have recorded progress in deep ($<10^{-5}$) nulls at wavelengths between 4 and 5 microns at 300 K. However, the ultimate goal and requirement of NICE is to repeat these measurements at the sensitivity levels expected for a planetary system, requiring deep cryogenic conditions at 15 K. Here, we describe the ``Ice Cube'' cryostat, a small version of the future NICE cryostat that is used for component and subsystem level cryogenic testing. This is interfaced with a measurement setup using a segmented aperture interferometer and a wavefront sensor. We will also describe the testing campaign for understanding the material and mounting challenges that will be faced when translating the warm bench to cryogenic operations.

astro-ph.IM↗

arXiv2026

A NICE (Nulling Interferometry Cryogenic Experiment) update: Beyond 1e-5 and towards cryogenic operation

The Nulling Interferometry Cryogenic Experiment (NICE) is a mid-infrared laboratory testbed at ETH Zürich that aims to not only reproduce the deep ($<1\times10^{-5}$) broadband nulls of the nulling testbeds of the early 2000s, but also at the required sensitivity levels expected for the LIFE space mission. This sensitivity enforces the experiment to go cryogenic at temperatures around 15 K; an ambitious task for an ultra-precise interferometer. We share our results of the ambient precursor experiment, demonstrating repeatable $<1\times10^{-5}$ nulls at a single wavelength and high throughput, and investigations into the nulling performance across a broader bandpass and with dual polarisation states. We will also highlight the push towards cryogenic operation, with the instalment of a new 15 K test cryostat that will inform our choices of materials and optomechanical mounting techniques.

astro-ph.IM↗

arXiv2026

Exploring Exoplanets with Interferometry

(Extract from the Executive Summary) Humanity stands at the threshold of answering one of its most profound questions: Does life exist beyond Earth? Ongoing and upcoming space missions, together with powerful ground-based instruments, have prepared the way for a transformational next step - the detailed characterization of Earth analogs orbiting Sun-like and other stars and the search for atmospheric biosignatures that may indicate life. Within this context, the European Space Agency's Voyage 2050 process has identified the direct detection of thermal emission from temperate terrestrial exoplanets in the mid-infrared (mid-IR) as a top scientific priority. The Large Interferometer For Exoplanets (LIFE) - a space-based, mid-IR nulling interferometer - is designed to meet this goal. LIFE will be capable of detecting climate-relevant gases such as CO$_2$ and H$_2$O, identifying classical biosignatures like O$_3$ and CH$_4$, and probing additional, non-classical biosignatures. It will also provide key data for determining planetary radius, albedo, and temperature, which are essential for assessing habitability. In parallel, the U.S. National Academy has recommended a complementary mission now called the Habitable Worlds Observatory (HWO) - a ~6-meter space telescope equipped with advanced coronagraphs to suppress starlight by a factor of ~10$^{10}$ across the visible and possibly into the near-infrared and near-ultraviolet. Together, LIFE and HWO offer synergistic capabilities, enabling a comprehensive and robust assessment of the prevalence of life-bearing exoplanets in our galactic neighbourhood - a first in human history. By uniting an international and interdisciplinary community of scientists and engineers, LIFE offers a credible pathway toward the direct detection and characterization of potentially habitable - and even inhabited - worlds.

astro-ph.IM↗

arXiv2026

A preliminary exploration of the effects of baseline length for the LIFE space mission

By aiming to find and characterise dozens of habitable exoplanets through the technique of nulling interferometry, the LIFE space mission will produce transformational science. One of the key parameters for such an interferometric mission is the nulling baseline length - the distance between nulled apertures, which past studies have assumed to be 10-100m. Advances in planet occurrence statistics and simulation tools allow us now to revisit this key assumption with significantly more detail, particularly with the intention to reduce the range of baselines considered due to mission implementation concerns. We utilise the LIFEsim mission simulator along with revised mathematical tools to identify whether the range of baselines could be reduced without significantly affecting planet yield and fringe tracking performance. Along the way, we also determine a new astrophysically motivated technique for choosing which baselines are optimal for a given science target. We find that indeed, LIFE could utilise a considerably shorter range of baselines, such as 25-80m, or even discrete baselines without much (<10%) loss of performance. Nevertheless, careful trade-offs between performance and implementation simplification must be made, especially considering any spectral weighting that may be required by the scientific goals, and the potential loss of target-specific baseline optimisation.

astro-ph.IM↗

arXiv2026

The Nulling Interferometry Cryogenic Experiment (NICE): Architecture, requirements, and preliminary warm precursor results

The success of the Large Interferometer For Exoplanets (LIFE) space mission depends on measuring the faint mid-infrared emission spectra of exoplanets while suppressing the glare of a host star. This requires an instrument capable of high-contrast nulling interferometry with exceptional sensitivity. While previous testbeds have proven the principle of deep, stable nulls, they have not combined high contrast with the high throughput and cryogenic operation required for LIFE. Here, we present the architecture of the Nulling Interferometry Cryogenic Experiment (NICE), a mid-infrared nulling testbed, to increase the technological readiness of LIFE. We derive the laboratory requirements necessary to validate the LIFE beam combiner and present the optical design of NICE. Finally, we report results from the ambient \enquote{Warm Bench} precursor, which has successfully demonstrated the required null depth ($< 10^{-5}$) using a polarized narrowband 4.7 um source, and the required throughput (> 17%) using one of the two nulling channels.

astro-ph.IM↗

arXiv2024

Large Interferometer For Exoplanets (LIFE). XIV. Finding terrestrial protoplanets in the galactic neighborhood

The increased brightness temperature of young rocky protoplanets during their magma ocean epoch makes them potentially amenable to atmospheric characterization to distances from the solar system far greater than thermally equilibrated terrestrial exoplanets, offering observational opportunities for unique insights into the origin of secondary atmospheres and the near surface conditions of prebiotic environments. The Large Interferometer For Exoplanets (LIFE) mission will employ a space-based mid-infrared nulling interferometer to directly measure the thermal emission of terrestrial exoplanets. Here, we seek to assess the capabilities of various instrumental design choices of the LIFE mission concept for the detection of cooling protoplanets with transient high-temperature magma ocean atmospheres, in young stellar associations in particular. Using the LIFE mission instrument simulator (LIFEsim) we assess how specific instrumental parameters and design choices, such as wavelength coverage, aperture diameter, and photon throughput, facilitate or disadvantage the detection of protoplanets. We focus on the observational sensitivities of distance to the observed planetary system, protoplanet brightness temperature using a blackbody assumption, and orbital distance of the potential protoplanets around both G- and M-dwarf stars. Our simulations suggest that LIFE will be able to detect (S/N $\geq$ 7) hot protoplanets in young stellar associations up to distances of $\approx$100 pc from the solar system for reasonable integration times (up to $\sim$hours). Detection of an Earth-sized protoplanet orbiting a solar-sized host star at 1 AU requires less than 30 minutes of integration time. M-dwarfs generally need shorter integration times. The contribution from wavelength regions $<$6 $μ$m is important for decreasing the detection threshold and discriminating emission temperatures.

astro-ph.EP↗

arXiv2023

Pyxis: A ground-based demonstrator for formation-flying optical interferometry

In the past few years, there has been a resurgence in studies towards space-based optical/infrared interferometry, particularly with the vision to use the technique to discover and characterise temperate Earth-like exoplanets around solar analogues. One of the key technological leaps needed to make such a mission feasible is demonstrating that formation flying precision at the level needed for interferometry is possible. Here, we present $\textit{Pyxis}$, a ground-based demonstrator for a future small satellite mission with the aim to demonstrate the precision metrology needed for space-based interferometry. We describe the science potential of such a ground-based instrument, and detail the various subsystems: three six-axis robots, a multi-stage metrology system, an integrated optics beam combiner and the control systems required for the necessary precision and stability. We end by looking towards the next stage of $\textit{Pyxis}$: a collection of small satellites in Earth orbit.

astro-ph.IM↗

arXiv2023

Large Interferometer For Exoplanets (LIFE): VII. Practical implementation of a five-telescope kernel-nulling beam combiner with a discussion on instrumental uncertainties and redundancy benefits

(Abridged) Context: In the previous paper in this series, we identified that a pentagonal arrangement of five telescopes, using a kernel-nulling beam combiner, shows notable advantages for some important performance metrics for a space-based mid-infrared nulling interferometer over several other considered configurations for the detection of Earth-like exoplanets around solar-type stars. Aims: We aim to produce a physical implementation of a kernel-nulling beam combiner for such a configuration, as well as a discussion of systematic and stochastic errors associated with the instrument. Methods: We developed a mathematical framework around a nulling beam combiner, and then used it along with a space interferometry simulator to identify the effects of systematic uncertainties. Results: We find that errors in the beam combiner optics, systematic phase errors and the RMS fringe tracking errors result in instrument limited performance at $\sim$4-7 $μ$m, and zodiacal limited at $\gtrsim$10 $μ$m. Assuming a beam splitter reflectance error of $|ΔR| = 5\%$ and phase shift error of $Δϕ= 3$ degrees, we find that the fringe tracking RMS should be kept to less than 3 nm in order to be photon limited, and the systematic piston error be less than 0.5 nm to be appropriately sensitive to planets with a contrast of 1$\times 10^{-7}$ over a 4-19 $μ$m bandpass. We also identify that the beam combiner design, with the inclusion of a well positioned shutter, provides an ability to produce robust kernel observables even if one or two collecting telescopes were to fail. The resulting four telescope combiner, when put into an X-array formation, results in a transmission map with a relative signal-to-noise ratio equivalent to 80% of the fully functioning X-array combiner.

astro-ph.IM↗

arXiv2022

Large Interferometer For Exoplanets (LIFE): IV. Ideal kernel-nulling array architectures for a space-based mid-infrared nulling interferometer

Aims: Optical interferometry from space for the purpose of detecting and characterising exoplanets is seeing a revival, specifically from missions such as the proposed Large Interferometer For Exoplanets (LIFE). A default assumption since the design studies of Darwin and TPF-I has been that the Emma X-array configuration is the optimal architecture for this goal. Here, we examine whether new advances in the field of nulling interferometry, such as the concept of kernel nulling, challenge this assumption. Methods: We develop a tool designed to derive the photon-limited signal to noise ratio of a large sample of simulated planets for different architecture configurations and beam combination schemes. We simulate four basic configurations: the double Bracewell/X-array, and kernel nullers with three, four and five telescopes respectively. Results: We find that a configuration of five telescopes in a pentagonal shape, using a five aperture kernel nulling scheme, outperforms the X-array design in both search (finding more planets) and characterisation (obtaining better signal, faster) when total collecting area is conserved. This is especially the case when trying to detect Earth twins (temperate, rocky planets in the habitable zone), showing a 23% yield increase over the X-array. On average, we find that a five telescope design receives 1.2 times the signal over the X-array design. Conclusions: With the results of this simulation, we conclude that the Emma X-array configuration may not be the best architecture choice for the upcoming LIFE mission, and that a five telescope design utilising kernel nulling concepts will likely provide better scientific return for the same collecting area, provided that technical solutions for the required achromatic phase shifts can be implemented.

astro-ph.IM↗

arXiv2022

Interferometric Beam Combination with a Triangular Tricoupler Photonic Chip

Beam combiners are important components of an optical/infrared astrophysical interferometer, with many variants as to how to optimally combine two or more beams of light to fringe-track and obtain the complex fringe visibility. One such method is the use of an integrated optics chip that can instantaneously provide the measurement of the visibility without temporal or spatial modulation of the optical path. Current asymmetric planar designs are complex, resulting in a throughput penalty, and so here we present developments into a three dimensional triangular tricoupler that can provide the required interferometric information with a simple design and only three outputs. Such a beam combiner is planned to be integrated into the upcoming $\textit{Pyxis}$ interferometer, where it can serve as a high-throughput beam combiner with a low size footprint. Results into the characterisation of such a coupler are presented, highlighting a throughput of 85$\pm$7% and a flux splitting ratio between 33:33:33 and 52:31:17 over a 20% bandpass. We also show the response of the chip to changes in optical path, obtaining an instantaneous complex visibility and group delay estimate at each input delay.

astro-ph.IM↗

arXiv2020

Confirming known planetary trends using a photometrically selected Kepler sample

Statistical studies of exoplanets and the properties of their host stars have been critical to informing models of planet formation. Numerous trends have arisen in particular from the rich Kepler dataset, including that exoplanets are more likely to be found around stars with a high metallicity and the presence of a "gap" in the distribution of planetary radii at 1.9$R_\oplus$. Here we present a new analysis on the Kepler field, using the APOGEE spectroscopic survey to build a metallicity calibration based on Gaia, 2MASS and Stromgren photometry. This calibration, along with masses and radii derived from a Bayesian isochrone fitting algorithm, is used to test a number of these trends with unbiased, photometrically derived parameters, albeit with a smaller sample size in comparison to recent studies. We recover that planets are more frequently found around higher metallicity stars; over the entire sample, planetary frequencies are $0.88\pm0.12$ percent for [Fe/H]<0 and $1.37\pm0.16$ percent for [Fe/H]$\geq$0 but at two sigma we find that the size of exoplanets influences the strength of this trend. We also recover the planet radius gap, along with a slight positive correlation with stellar mass. We conclude that this method shows promise to derive robust statistics of exoplanets. We also remark that spectrophotometry from Gaia DR3 will have an effective resolution similar to narrow band filters and allow to overcome the small sample size inherent in this study.

astro-ph.EP↗

arXiv2020

A Linear Formation Flying Astronomical Interferometer in Low Earth Orbit

Space interferometry is the inevitable endpoint of high angular resolution astrophysics, and a key technology that can be leveraged to analyse exoplanet formation and atmospheres with exceptional detail. However, the anticipated cost of large missions such as Darwin and TPF-I, and inadequate technology readiness levels have resulted in limited developments since the late 2000s. Here, we present a feasibility study into a small scale formation flying interferometric array in Low Earth Orbit, that will aim to prove the technical concepts involved with space interferometry while still making unique astrophysical measurements. We will detail the proposed system architecture and metrology system, as well as present orbital simulations that show that the array should be stable enough to perform interferometry with < 50m/s/year delta-v and one thruster per spacecraft. We also conduct observability simulations to identify which parts of the sky are visible for a given orbital configuration. We conclude with optimism that this design is achievable, but a more detailed control simulation factoring in a demonstrated metrology system is the next step to demonstrate full mission feasibility.

astro-ph.IM↗

arXiv2019

Chronostar: a novel Bayesian method for kinematic age determination. I. Derivation and application to the β Pictoris Moving Group

Gaia DR2 provides an unprecedented sample of stars with full 6D phase-space measurements, creating the need for a self-consistent means of discovering and characterising the phase-space overdensities known as moving groups or associations. Here we present Chronostar, a new Bayesian analysis tool that meets this need. Chronostar uses the Expectation-Maximisation algorithm to remove the circular dependency between association membership lists and fits to their phase-space distributions, making it possible to discover unknown associations within a kinematic data set. It uses forward-modelling of orbits through the Galactic potential to overcome the problem of tracing backward stars whose kinematics have significant observational errors, thereby providing reliable ages. In tests using synthetic data sets with realistic measurement errors and complex initial distributions, Chronostar successfully recovers membership assignments and kinematic ages up to ~ 100 Myr. In tests on real stellar kinematic data in the phase-space vicinity of the $β$ Pictoris Moving Group, Chronostar successfully rediscovers the association without any human intervention, identifies 15 new likely members, corroborates 43 candidate members, and returns a kinematic age of 17.8+-1.2 Myr. In the process we also rediscover the Tucana-Horologium Moving Group, for which we obtain a kinematic age of 36.3+1.3-1.4 Myr.

astro-ph.SR↗