arXiv subjects

Jonathan Crass

Publications and source records attributed to Jonathan Crass.

33 records · Page 2Linked to original sources

arXiv2019

Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring

Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.

astro-ph.IM↗

arXiv2019

Assessing the Suitability of H4RG Near Infrared Detectors for Precise Doppler Radial Velocity Measurements

At wavelengths longwards of the sensitivity of silicon, hybrid structured mercury-cadmium-telluride (HgCdTe) detectors show promise to enable extremely precise radial velocity (RV) measurements of late-type stars. The most advanced near infrared (NIR) detector commercially available is the HAWAII series (HxRG) of NIR detectors. While the quantum efficiency of such devices has been shown to be approx ninety percent, the noise characteristics of these devices, and how they relate to RV measurements, have yet to be quantified. We characterize the various noise sources generated by H4RG arrays using numerical simulations. We present recent results using our end-to-end spectrograph simulator in combination with the HxRG Noise Generator, which emulates the effects of read noise, parameterized by white noise, correlated and uncorrelated pink noise, alternating column noise, and picture frame noise. The effects of nonlinear pixel response, dark current, persistence, and interpixel capacitance (IPC) on RV precision are also considered. Our results have implications for RV error budgets and instrument noise floors that can be achieved with NIR Doppler spectrographs that utilize this kind of detector.

astro-ph.IM↗

arXiv2019

Enabling the next generation of scientific discoveries by embracing photonic technologies

The fields of Astronomy and Astrophysics are technology limited, where the advent and application of new technologies to astronomy usher in a flood of discoveries altering our understanding of the Universe (e.g., recent cases include LIGO and the GRAVITY instrument at the VLTI). Currently, the field of astronomical spectroscopy is rapidly approaching an impasse: the size and cost of instruments, especially multi-object and integral field spectrographs for extremely large telescopes (ELTs), are pushing the limits of what is feasible, requiring optical components at the very edge of achievable size and performance. For these reasons, astronomers are increasingly looking for innovative solutions like photonic technologies that promote instrument miniaturization and simplification, while providing superior performance. Astronomers have long been aware of the potential of photonic technologies. The goal of this white paper is to draw attention to key photonic technologies and developments over the past two decades and demonstrate there is new momentum in this arena. We outline where the most critical efforts should be focused over the coming decade in order to move towards realizing a fully photonic instrument. A relatively small investment in this technology will advance astronomical photonics to a level where it can reliably be used to solve challenging instrument design limitations. For the benefit of both ground and space borne instruments alike, an endorsement from the National Academy of Sciences decadal survey will ensure that such solutions are set on a path to their full scientific exploitation, which may one day address a broad range of science cases outlined in the KSPs.

astro-ph.IM↗

arXiv2019

The need for single-mode fiber-fed spectrographs

Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is reaching a critical juncture: the measurement sensitivity of existing radial-velocity instruments is becoming the limiting factor in further increasing our knowledge. Without improvement in delivered RV measurement precision, we will not be able to provide dynamical mass and density estimates for some of the most exciting (and consequently most challenging) discoveries expected from new transit missions including the Transiting Exoplanet Survey Satellite (TESS) (Plavchan et al. 2015, Ricker et al. 2014). RV precisions at the 10cm/s level are required to fully confirm earth-like analogues, provide masses and measure density to the 1-5% level from these missions. Additionally, this RV capability will also be important to allow for efficient target selection for facilities such as the James Webb Space Telescope (JWST). A promising way forward to achieve this goal is to use single-mode fibers to inject light to a spectrograph. This mitigates many of the error terms facing current generation seeing-limited RV instruments while simultaneously offering the capability of high resolution spectroscopy within a small optical footprint (Schwab et al. 2012, Crepp 2014, Jovanovic et al. 2016a). We discuss the benefits of this technique, its challenges, and the current status of development.

astro-ph.IM↗

arXiv2018

A Radial Velocity Error Budget for Single-mode Fiber Doppler Spectrographs

Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater's design is used to quantify and assess the relative advantages and drawbacks of precise Doppler time series measurements made at the diffraction limit. This framework can be applied for trade-study work to investigate the impact of instrument design decisions on systematic uncertainties encountered in the regime of sub-meter-per-second precision. We find that working at the diffraction-limit through the use of AO and SMF's allows for high spectral resolution and improved instrument stability at the expense of limiting magnitude and longer integration times. Large telescopes equipped with AO alleviates the primary challenges of SMF spectrographs.

astro-ph.IM↗

arXiv2018

Instrument Simulator and Data Reduction Pipeline for the iLocater Spectrograph

iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to generate extremely precise RV measurements, it differs from conventional Doppler spectrographs, and therefore carries additional risk. To aid with the design of the instrument, we have developed a comprehensive simulator and data reduction pipeline. In this paper, we describe the simulation code and quantify its performance in the context of understanding terms in a RV error budget. We find that the program has an intrinsic precision of $σ< 5$ cm/s, thereby justifying its use in a number of instrument trade studies. The code is written in Matlab and available for download on GitHub.

astro-ph.IM↗

arXiv2018

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.

astro-ph.IM↗

arXiv2018

EarthFinder: A Precise Radial Velocity Probe Mission Concept For the Detection of Earth-Mass Planets Orbiting Sun-like Stars

EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going to space? What can't be done form the ground? These two questions flow down to these specific tasks for our study - Identify the velocity limit, if any, introduced from micro- and macro-telluric absorption in the Earth's atmosphere; Evaluate the unique advantages that a space-based platform provides to emable the identification and mitigation of stellar acitivity for multi-planet signal recovery.

astro-ph.IM↗

arXiv2016

iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope

We are developing a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.

astro-ph.IM↗

arXiv2016

On-sky single-mode fiber coupling measurements at the Large Binocular Telescope

The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $μ$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.

astro-ph.IM↗

arXiv2016

The iLocater cryostat: design and thermal control strategy for precision radial velocity measurements

The current generation of precision radial velocity (RV) spectrographs are seeing-limited instruments. In order to achieve high spectral resolution on 8m class telescopes, these spectrographs require large optics and in turn, large instrument volumes. Achieving milli-Kelvin thermal stability for these systems is challenging but is vital in order to obtain a single measurement RV precision of better than 1m/s. This precision is crucial to study Earth-like exoplanets within the habitable zone. iLocater is a next generation RV instrument being developed for the Large Binocular Telescope. Unlike seeing-limited RV instruments, iLocater uses adaptive optics (AO) to inject a diffraction-limited beam into single-mode fibers. These fibers illuminate the instrument spectrograph, facilitating a diffraction-limited design and a small instrument volume compared to present-day instruments. This enables intrinsic instrument stability and facilitates precision thermal control. We present the current design of the iLocater cryostat which houses the instrument spectrograph and the strategy for its thermal control. The spectrograph is situated within a pair of radiation shields mounted inside an MLI lined vacuum chamber. The outer radiation shield is actively controlled to maintain instrument stability at the sub-mK level and minimize effects of thermal changes from the external environment. An inner shield passively dampens any residual temperature fluctuations and is radiatively coupled to the optical board. To provide intrinsic stability, the optical board and optic mounts will be made from Invar and cooled to 58K to benefit from a zero coefficient of thermal expansion (CTE) value at this temperature. Combined, the small footprint of the instrument spectrograph, the use of Invar, and precision thermal control will allow long-term sub-milliKelvin stability to facilitate precision RV measurements.

astro-ph.IM↗

arXiv2015

Design of the iLocater Acquisition Camera Demonstration System

Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.

astro-ph.IM↗

arXiv2014

High-Resolution Imaging in the Visible on Large Ground-Based Telescopes

Lucky Imaging combined with a low order adaptive optics system has given the highest resolution images ever taken in the visible or near infrared of faint astronomical objects. This paper describes a new instrument that has already been deployed on the WHT 4.2m telescope on La Palma, with particular emphasis on the optical design and the predicted system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow virtually full sky coverage with faint natural guide stars. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

astro-ph.IM↗

arXiv2012

AOLI-- Adaptive Optics Lucky Imager: Diffraction Limited Imaging in the Visible on Large Ground-Based Telescopes

The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been possible from space.

astro-ph.IM↗

arXiv2012

The AOLI low-order non-linear curvature wavefront sensor: a method for high sensitivity wavefront reconstruction

The Adaptive Optics Lucky Imager (AOLI) is a new instrument under development to demonstrate near diffraction limited imaging in the visible on large ground-based telescopes. We present the adaptive optics system being designed for the instrument comprising a large stroke deformable mirror, fixed component non-linear curvature wavefront sensor and photon-counting EMCCD detectors. We describe the optical design of the wavefront sensor where two photoncounting CCDs provide a total of four reference images. Simulations of the optical characteristics of the system are discussed, with their relevance to low and high order AO systems. The development and optimisation of high-speed wavefront reconstruction algorithms are presented. Finally we discuss the results of simulations to demonstrate the sensitivity of the system.

astro-ph.IM↗