arXiv subjects

Jonathan D. Pritchard

Publications and source records attributed to Jonathan D. Pritchard.

15 recordsLinked to original sources

arXiv2026

A quantum wire approach to weighted combinatorial graph optimisation problems

Neutral atom arrays provide a versatile platform to implement coherent quantum annealing as an approach to solving hard combinatorial optimization problems. Here we present and experimentally demonstrate an efficient encoding scheme based on chains of Rydberg-blockaded atoms, which we call quantum wires, to natively embed maximum weighted independent set (MWIS) and quadratic unconstrained binary optimization (QUBO) problems on a neutral atom architecture. For graphs with quasi-unit-disk connectivity, in which only a few long-range edges are required, our approach requires a significantly lower overhead in the number of ancilla qubits than previous proposals, facilitating the implementation on currently available hardware. To demonstrate the approach, we perform annealing of weighted graphs on a programmable atom array using local light-shifts to encode problem-specific weights across graphs of varying sizes. This approach successfully identifies the solutions to the original MWIS and QUBO graph instances. Our work expands the operational toolkit of near-term neutral atom arrays, enhancing their potential for scalable quantum optimization.

quant-ph↗

arXiv2026

Adiabatic state preparation and thermalization of simulated phase noise in a Rydberg spin Hamiltonian

Laser phase noise is one of the main sources of decoherence in driven Rydberg systems with neutral atoms in tweezer arrays. While the effect of phase noise in the regimes of isolated qubits and few-qubit gate protocols has been studied extensively, there are open questions about the effects of this noise on many-body systems. In many scenarios, the effects of noise cannot simply be described by an increase in the energy or temperature of the system, leading to non-trivial changes in the state and relevant correlations. In this work, we use stochastic sampling to simulate laser phase noise based on experimentally relevant spectral densities. We explore the impact of this noise on adiabatic state preparation in a one-dimensional system, discussing the interplay between heating and interactions during dynamics. We find that for certain adiabatic processes, the noise can be seen to approximately thermalize in terms of its effects on relevant correlation functions.

quant-ph↗

arXiv2025

Entangled states from sparsely coupled spins for metrology with neutral atoms

Quantum states featuring extensive multipartite entanglement are a resource for quantum-enhanced metrology, with sensitivity up to the Heisenberg limit. However, robust generation of these states using unitary dynamics typically requires all-to-all interactions among particles. Here, we demonstrate that optimal states for quantum sensing can be generated with sparse interaction graphs featuring only a logarithmic number of couplings per particle. We show that specific sparse graphs with long-range interactions can approximate the dynamics of all-to-all spin models, such as the one-axis twisting model, even for large system sizes. The resulting sparse coupling graphs and protocol can also be efficiently implemented using dynamic reconfiguration of atoms in optical tweezers.

quant-ph↗

arXiv2025

Graph Coloring via Quantum Optimization on a Rydberg-Qudit Atom Array

Neutral atom arrays have emerged as a versatile candidate for the embedding of hard classical optimization problems. Prior work has focused on mapping problems onto finding the maximum independent set of weighted or unweighted unit disk graphs. In this paper we introduce a new approach to solving natively-embedded vertex graph coloring problems by performing coherent annealing with Rydberg-qudit atoms, where different same-parity Rydberg levels represent a distinct label or color. We demonstrate the ability to robustly find optimal graph colorings for chromatic numbers up to the number of distinct Rydberg states used, in our case $k=3$. We analyze the impact of both the long-range potential tails and residual inter-state interactions, proposing encoding strategies that suppress errors in the resulting ground states. We discuss the experimental feasibility of this approach and propose extensions to solve higher chromatic number problems, providing a route towards direct solution of a wide range of real-world integer optimization problems using near-term neutral atom hardware.

quant-ph↗

arXiv2023

Object detection and rangefinding with quantum states using simple detection

In a noisy environment with weak single levels, quantum illumination can outperform classical illumination in determining the presence and range of a target object even in the limit of sub-optimal measurements based on non-simultaneous, phase-insensitive coincidence counts. Motivated by realistic experimental protocols, we present a theoretical framework for analysing coincident multi-shot data with simple detectors. This approach allows for the often-overlooked non-coincidence data to be included, as well as providing a calibration-free threshold for inferring the presence and range of an object, enabling a fair comparison between different detection regimes. Our results quantify the advantage of quantum over classical illumination when performing target discrimination in a noisy thermal environment, including estimating the number of shots required to detect a target with a given confidence level.

quant-ph↗

arXiv2023

Demonstration of quantum-enhanced rangefinding robust against classical jamming

In this paper we demonstrate operation of a quantum-enhanced lidar based on a continuously pumped photon pair source combined with simple detection in regimes with over 5 orders of magnitude separation between signal and background levels and target reflectivity down to -52 dB. We characterise the performance of our detector using a log-likelihood analysis framework, and crucially demonstrate the robustness of our system to fast and slow classical jamming, introducing a new protocol to implement dynamic background tracking to eliminate the impact of slow background changes whilst maintaining immunity to high frequency fluctuations. Finally, we extend this system to the regime of rangefinding in the presence of classical jamming to locate a target with an 11 cm spatial resolution limited only by the detector jitter. These results demonstrate the advantage of exploiting quantum correlations for lidar applications, providing a clear route to implementation of this system in real-world scenarios.

quant-ph↗

arXiv2023

High-efficiency coupled-cavity optical frequency comb generation

We present a high efficiency source of picosecond pulses derived from a dual cavity optical frequency comb generator. This approach overcomes the limitations of single cavity comb generators that are restricted to efficiencies of a few percent. We achieve picosecond pulses with GHz repetition rates offering over a hundred times higher output efficiency than a single cavity design and demonstrate tuning of pulse width by varying the modulation depth of the intra-cavity electro-optic modulator. These results provide a wavelength-agnostic design with a compact footprint for the development of portable picosecond pulsed laser systems for timing, metrology, and LIDAR applications.

physics.optics↗

arXiv2022

High-fidelity multiqubit Rydberg gates via two-photon adiabatic rapid passage

We present a robust protocol for implementing high-fidelity multiqubit controlled phase gates $(C^kZ)$ on neutral atom qubits coupled to highly excited Rydberg states. Our approach is based on extending adiabatic rapid passage to two-photon excitation via a short-lived intermediate excited state common to alkali-atom Rydberg experiments, accounting for the full impact of spontaneous decay and differential AC Stark shifts from the complete manifold of hyperfine excited states. We evaluate and optimize gate performance, concluding that for Cs and currently available laser frequencies and powers, a $CCZ$ gate with fidelity $\mathcal{F}>0.995$ for three qubits and $CCCZ$ with $\mathcal{F}>0.99$ for four qubits is attainable in $\sim 1.8$~$μ$s via this protocol. Higher fidelities are accessible with future technologies, and our results highlight the ultility of neutral atom arrays for the native implementation of multiqubit unitaries.

quant-ph↗

arXiv2021

Strong coupling and active cooling in a finite temperature hybrid atom-cavity system

For a standard two-level atom coupled to the quantized field of a resonant cavity, finite temperature effects lead to thermal occupation of the cavity modes that obfuscates measurement of the quantum nature of the atom-light interaction. In this paper we demonstrate that using a hybrid system of a superconducting cavity coupled to a multi-level Rydberg atom it is possible to observe the quantum nature of strong coupling even at finite temperatures, and to exploit this coupling to permit cooling of the thermal microwave mode towards the ground-state, enabling observation of coherent vacuum Rabi oscillations even at 4~K for realistic experimental parameters. Cooling for multiple atoms is also explored, showing maximal cooling for small samples, making this a viable approach to cavity cooling with potential applications in long-range coupling of superconducting qubits via thermal waveguides.

quant-ph↗

arXiv2021

A practical compact source of heralded single photons for simple detection LIDAR

Optical quantum technologies such as quantum sensing, quantum cryptography and quantum computation all utilize properties of non-classical light, such as precise photon-number and entangled photon-pair states, to surpass technologies based on the classical light. A common route for obtaining heralded single photons is spontaneous four-wave mixing in optical fibers, allowing for a well-defined spatial mode, for high efficiency integration into optical fiber networks. These fibers are typically pumped using large, commercial, pulsed lasers requiring high-power (~10 W) pump lasers and are limited to ~MHz repetition rate. Here we propose a cost-efficient, compact and mobile alternative. Photon pairs at 660 nm and 960 nm will be created using four-wave mixing in commercial birefringent optical fiber, pumped using transform limited picosecond pulses with GHz repetition rates derived from a 785 nm CW laser diode using cavity-enhanced optical frequency comb generation. The pulses are predicted to have average power of 275 mW, a peak power of >40 W, and predicted photon yield of >2000 pairs detected per second. This design will be later utilized to implement a quantum illumination scheme based on a coincidence count between idler and signal photons - instead of joint measurement between signal and idler. This will allow for quantum advantage over classic LIDAR without the requirement for maintaining an interferometric stability in free space.

physics.optics↗

arXiv2021

Theoretical comparison of quantum and classical illumination for simple detection-based LIDAR

Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.

physics.optics↗

arXiv2021

Optimal State Choice for Rydberg Atom Microwave Sensors

Rydberg electromagnetically induced transparency (EIT) enables realization of atom-based SI-traceable microwave (MW) sensing, imaging and communication devices by exploiting the strong microwave electric dipole coupling of highly excited Rydberg states. Essential to the development of robust devices is a careful characterization of sensor performance and systematic uncertainties. In this work we present a comparison of microwave-induced EIT splitting in a cesium atomic vapor for four possible Rydberg couplings $65S_{1/2}\rightarrow 65P_{1/2}$, $66S_{1/2}\rightarrow 66P_{3/2}$, $79D_{5/2}\rightarrow 81P_{3/2}$ and $62D_{5/2}\rightarrow 60F_{7/2}$ at microwave transition frequencies around 13 GHz. Our work highlights the impact of multi-photon couplings to neighboring Rydberg states in breaking both the symmetry and linearity of the observed splitting, with excellent agreement between experimental observations and a theoretical model accounting for multi-photon couplings. We identify an optimal angular state choice for robust microwave measurements, as well as demonstrating a new regime in which microwave polarization can be measured.

physics.atom-ph↗

arXiv2021

Gaussian State-Based Quantum Illumination with Simple Photodetection

Proofs of the quantum advantage available in imaging or detecting objects under quantum illumination can rely on optimal measurements without specifying what they are. We use the continuous-variable Gaussian quantum information formalism to show that quantum illumination is better for object detection compared with coherent states of the same mean photon number, even for simple direct photodetection. The advantage persists if signal energy and object reflectivity are low and background thermal noise is high. The advantage is even greater if we match signal beam detection probabilities rather than mean photon number. We perform all calculations with thermal states, even for non-Gaussian conditioned states with negative Wigner functions. We simulate repeated detection using a Monte Carlo process that clearly shows the advantages obtainable.

quant-ph↗

arXiv2017

Detection of Applied and Ambient Forces with a Matterwave Magnetic-Gradiometer

An atom interferometer using a Bose-Einstein condensate of $^{87}$Rb atoms is utilized for the measurement of magnetic field gradients. Composite optical pulses are used to construct a spatially symmetric Mach-Zehnder geometry. Using a biased interferometer we demonstrate the ability to measure small residual forces in our system at the position of the atoms. These are a residual magnetic field gradient of 15$\pm$2 mG/cm and and an inertial acceleration of 0.08$\pm$0.02 m/s$^2$. Our method has important applications in the calibration of precision measurement devices and the reduction of systematic errors.

physics.atom-ph↗

arXiv2011

Fractional photon-assisted tunnelling of ultra-cold atoms in periodically shaken double-well lattices

Fractional photon-assisted tunnelling is investigated both numerically and analytically in a double-well lattice. While integer photon-assisted tunnelling is a single-particle effect, fractional photon-assisted tunnelling is an interaction-induced many-body effect. Double-well lattices with few particles in each double well are ideal to study this effect far from the mean-field effects. It is predicted that the 1/4-resonance is observable in such systems. Fractional photon-assisted tunnelling provides a physically relevant model for which N-th order time-dependent perturbation theory can be large although all previous orders are small.

cond-mat.quant-gas↗