arXiv subjects

Jong-Ho Lee

Publications and source records attributed to Jong-Ho Lee.

10 recordsLinked to original sources

arXiv2022

Joint Vehicle Tracking and RSU Selection for V2I Communications with Extended Kalman Filter

We develop joint vehicle tracking and road side unit (RSU) selection algorithms suitable for vehicle-to-infrastructure (V2I) communications. We first design an analytical framework for evaluating vehicle tracking systems based on the extended Kalman filter. A simple, yet effective, metric that quantifies the vehicle tracking performance is derived in terms of the angular derivative of a dominant spatial frequency. Second, an RSU selection algorithm is proposed to select a proper RSU that enhances the vehicle tracking performance. A joint vehicle tracking algorithm is also developed to maximize the tracking performance by considering sounding samples at multiple RSUs while minimizing the amount of sample exchange. The numerical results verify that the proposed vehicle tracking algorithms give better performance than conventional signal-to-noise ratio-based tracking systems.

cs.IT↗

arXiv2021

Adaptive Beam Design for V2I Communications using Vehicle Tracking with Extended Kalman Filter

Vehicle-to-everything communication system is a strong candidate for improving the driving experience and automotive safety by linking vehicles to wireless networks. To take advantage of the full benefits of vehicle connectivity, it is essential to ensure a stable network connection between roadside unit (RSU) and fast-moving vehicles. Based on the extended Kalman filter (EKF), we develop a vehicle tracking algorithm to enable reliable radio connections. For the vehicle tracking algorithm, we focus on estimating the rapid changes in the beam direction of a high-mobility vehicle while reducing the feedback overhead. Furthermore, we design a beamforming codebook that considers the road layout and RSU. By leveraging the proposed beamforming codebook, vehicles on the road can expect a service quality similar to that of conventional cellular services. Finally, a beamformer selection algorithm is developed to secure sufficient gain for the system's link budget. Numerical results verify that the EKF-based vehicle tracking algorithm and the proposed beamforming structure are more suitable for vehicle-to-infrastructure networks compared to existing schemes.

cs.IT↗

arXiv2021

Hardware Implementation of Spiking Neural Networks Using Time-To-First-Spike Encoding

Hardware-based spiking neural networks (SNNs) are regarded as promising candidates for the cognitive computing system due to low power consumption and highly parallel operation. In this work, we train the SNN in which the firing time carries information using temporal backpropagation. The temporally encoded SNN with 512 hidden neurons showed an accuracy of 96.90% for the MNIST test set. Furthermore, the effect of the device variation on the accuracy in temporally encoded SNN is investigated and compared with that of the rate-encoded network. In a hardware configuration of our SNN, NOR-type analog memory having an asymmetric floating gate is used as a synaptic device. In addition, we propose a neuron circuit including a refractory period generator for temporally encoded SNN. The performance of the 2-layer neural network consisting of synapses and proposed neurons is evaluated through circuit simulation using SPICE. The network with 128 hidden neurons showed an accuracy of 94.9%, a 0.1% reduction compared to that of the system simulation of the MNIST dataset. Finally, the latency and power consumption of each block constituting the temporal network is analyzed and compared with those of the rate-encoded network depending on the total time step. Assuming that the total time step number of the network is 256, the temporal network consumes 15.12 times lower power than the rate-encoded network and can make decisions 5.68 times faster.

cs.NE↗

arXiv2021

Pulse-Width Modulation Neuron Implemented by Single Positive-Feedback Device

Positive-feedback (PF) device and its operation scheme to implement pulse width modulation (PWM) function was proposed and demonstrated, and the device operation mechanism for implementing PWM function was analyzed. By adjusting the amount of the charge stored in the n- floating body (Qn), the potential of the floating body linearly changes with time. When Qn reaches to a threshold value (Qth), the PF device turns on abruptly. From the linear time-varying property of Qn and the gate bias dependency of Qth, fully functionable PWM neuron properties including voltage to pulse width conversion and hard-sigmoid activation function were successfully obtained from a single PF device. A PWM neuron can be implemented by using a single PF device, thus it is beneficial to extremely reduce the area of a PWM neuron circuit than the previously reported one.

cs.ET↗

arXiv2020

Geometric Sequence Decomposition with $k$-simplexes Transform

This paper presents a computationally efficient technique for decomposing non-orthogonally superposed $k$ geometric sequences. The method, which is named as geometric sequence decomposition with $k$-simplexes transform (GSD-ST), is based on the concept of transforming an observed sequence to multiple $k$-simplexes in a virtual $k$-dimensional space and correlating the volumes of the transformed simplexes. Hence, GSD-ST turns the problem of decomposing $k$ geometric sequences into one of solving a $k$-th order polynomial equation. Our technique has significance for wireless communications because sampled points of a radio wave comprise a geometric sequence. This implies that GSD-ST is capable of demodulating randomly combined radio waves, thereby eliminating the effect of interference. To exemplify the potential of GSD-ST, we propose a new radio access scheme, namely non-orthogonal interference-free radio access (No-INFRA). Herein, GSD-ST enables the collision-free reception of uncoordinated access requests. Numerical results show that No-INFRA effectively resolves the colliding access requests when the interference is dominant.

eess.SP↗

arXiv2019

Limited Feedback Designs for Machine-type Communications Exploiting User Cooperation

Multiuser multiple-input multiple-output (MIMO) systems are a prime candidate for use in massive connection density in machine-type communication (MTC) networks. One of the key challenges of MTC networks is to obtain accurate channel state information (CSI) at the access point (AP) so that the spectral efficiency can be improved by enabling enhanced MIMO techniques. However, current communication mechanisms relying upon frequency division duplexing (FDD) might not fully support an enormous number of devices due to the rate-constrained limited feedback and the time-consuming scheduling architectures. In this paper, we propose a user cooperation-based limited feedback strategy to support high connection density in massive MTC networks. In the proposed algorithm, two close-in users share the quantized version of channel information in order to improve channel feedback accuracy. The cooperation process is performed without any transmitter interventions (i.e., in a grant-free manner) to satisfy the low-latency requirement that is vital for MTC services. Moreover, based on the sum-rate throughput analysis, we develop an adaptive cooperation algorithm with a view to activating/deactivating the user cooperation mode according to channel and network conditions.

cs.IT↗

arXiv2018

Unsupervised Online Learning With Multiple Postsynaptic Neurons Based on Spike-Timing-Dependent Plasticity Using a TFT-Type NOR Flash Memory Array

We present a two-layer fully connected neuromorphic system based on a thin-film transistor (TFT)-type NOR flash memory array with multiple postsynaptic (POST) neurons. Unsupervised online learning by spike-timing-dependent plasticity (STDP) on the binary MNIST handwritten datasets is implemented, and its recognition result is determined by measuring firing rate of POST neurons. Using a proposed learning scheme, we investigate the impact of the number of POST neurons in terms of recognition rate. In this neuromorphic system, lateral inhibition function and homeostatic property are exploited for competitive learning of multiple POST neurons. The simulation results demonstrate unsupervised online learning of the full black-and-white MNIST handwritten digits by STDP, which indicates the performance of pattern recognition and classification without preprocessing of input patterns.

cs.NE↗

arXiv2017

Deep Learning Based NLOS Identification with Commodity WLAN Devices

Identifying line-of-sight (LOS) and non-LOS (NLOS) channel conditions can improve the performance of many wireless applications, such as signal strength-based localization algorithms. For this purpose, channel state information (CSI) obtained by commodity IEEE 802.11n devices can be used, because it contains information about channel impulse response (CIR). However, because of the limited sampling rate of the devices, a high-resolution CIR is not available, and it is difficult to detect the existence of an LOS path from a single CSI measurement, but it can be inferred from the variation pattern of CSI over time. To this end, we propose a recurrent neural network (RNN) model, which takes a series of CSI to identify the corresponding channel condition. We collect numerous measurement data under an indoor office environment, train the proposed RNN model, and compare the performance with those of existing schemes that use handcrafted features. The proposed method efficiently learns a non-linear relationship between input and output, and thus, yields high accuracy even for data obtained in a very short period.

cs.NI↗

arXiv2017

Adaptive Learning Rule for Hardware-based Deep Neural Networks Using Electronic Synapse Devices

In this paper, we propose a learning rule based on a back-propagation (BP) algorithm that can be applied to a hardware-based deep neural network (HW-DNN) using electronic devices that exhibit discrete and limited conductance characteristics. This adaptive learning rule, which enables forward, backward propagation, as well as weight updates in hardware, is helpful during the implementation of power-efficient and high-speed deep neural networks. In simulations using a three-layer perceptron network, we evaluate the learning performance according to various conductance responses of electronic synapse devices and weight-updating methods. It is shown that the learning accuracy is comparable to that obtained when using a software-based BP algorithm when the electronic synapse device has a linear conductance response with a high dynamic range. Furthermore, the proposed unidirectional weight-updating method is suitable for electronic synapse devices which have nonlinear and finite conductance responses. Because this weight-updating method can compensate the demerit of asymmetric weight updates, we can obtain better accuracy compared to other methods. This adaptive learning rule, which can be applied to full hardware implementation, can also compensate the degradation of learning accuracy due to the probable device-to-device variation in an actual electronic synapse device.

cs.NE↗

arXiv2010

Full-Duplex Relay based on Zero-Forcing Beamforming

In this paper, we propose a full-duplex relay (FDR) based on a zero-forcing beamforming (ZFBF) for a multiuser MIMO relay system. The ZFBF is employed at the base station to suppress both the self-interference of the relay and the multiuser interference at the same time. Numerical results show that the proposed FDR can enhance the sum rate performance as compared to the half-duplex relay (HDR), if sufficient isolation between the transmit and receive antennas is ensured at the relay.

cs.IT↗