SearcharxivSearch

arXiv subjects

Joon Hyo Rhee

Publications and source records attributed to Joon Hyo Rhee.

8 recordsLinked to original sources

A High-frequency Geodetic VLBI Experiment for Optical Clock Comparison

An intercontinental metrological clock comparison between Italy and the Republic of Korea was performed by means of geodetic K-band VLBI observations. The comparison involved the hydrogen masers (H-masers) used at Medicina and Sejong radio telescopes. The same clocks were simultaneously compared by a satellite link and by high-precision optical clocks maintained at the National Metrology Institutes, KRISS in Korea and INRIM in Italy, and delivered to VLBI antennas via optical fiber. The H-masers frequency difference was estimated by extrapolating the clock rate from VLBI data using two geodetic VLBI software. This was subsequently compared with clock differences derived by satellite link and by local optical clocks. Results obtained with different approaches were in agreement at the level of $10^{-15}$ s/s. This pilot study demonstrates that standard high-frequency (K-band) geodetic VLBI campaigns could be a viable approach to conduct intercontinental clock comparisons, now only possible via satellite links. This uncertainty can be reduced thanks to the planned installation of new-generation, broadband, high-frequency receivers on the involved telescopes. K/Q/W-band geodetic observations will allow an improvement of the accuracy of the resulting group delays through broad bandwidth synthesis from 20 to 100 GHz. Furthermore, the Frequency Phase Transfer (FPT) method will also be explored together with the use of PCAL systems installed at the radio telescopes to improve phase stability and thus allow a better estimation of the station clock parameters.

astro-ph.IM

CSAC Drift Modeling Considering GPS Signal Quality in the Case of GPS Signal Unavailability

The Global Positioning System (GPS), one of the Global Navigation Satellite Systems (GNSS), provides accurate position, navigation and time (PNT) information to various applications. One of the application that is highly receiving attention is satellite vehicles, especially Low Earth Orbit (LEO) satellites. Due to their limited ways to get PNT information and low performance of their onboard clocks, GPS system time (GPST) provided by GPS is a good reference clock to synchronize. However, GPS is well-known for its vulnerability to intentional or unintentional interference. This study aims to maintain the onboard clock with less error relative to the GPST even when the GPS signal is disrupted. In this study, we analyzed two major factors that affects the quality of the GPS measurements: the number of the visible satellites and the geometry of the satellites. Then, we proposed a weighted model for a Chip-Scale Atomic Clock (CSAC) that mitigates the clock error relative to the GPST while considering the two factors. Based on this model, a stand-alone CSAC could maintain its error less than 4 microseconds, even in a situation where no GPS signals are received for 12 hours.

eess.SY

Detection of Pedestrian Turning Motions to Enhance Indoor Map Matching Performance

A pedestrian navigation system (PNS) in indoor environments, where global navigation satellite system (GNSS) signal access is difficult, is necessary, particularly for search and rescue (SAR) operations in large buildings. This paper focuses on studying pedestrian walking behaviors to enhance the performance of indoor pedestrian dead reckoning (PDR) and map matching techniques. Specifically, our research aims to detect pedestrian turning motions using smartphone inertial measurement unit (IMU) information in a given PDR trajectory. To improve existing methods, including the threshold-based turn detection method, hidden Markov model (HMM)-based turn detection method, and pruned exact linear time (PELT) algorithm-based turn detection method, we propose enhanced algorithms that better detect pedestrian turning motions. During field tests, using the threshold-based method, we observed a missed detection rate of 20.35% and a false alarm rate of 7.65%. The PELT-based method achieved a significant improvement with a missed detection rate of 8.93% and a false alarm rate of 6.97%. However, the best results were obtained using the HMM-based method, which demonstrated a missed detection rate of 5.14% and a false alarm rate of 2.00%. In summary, our research contributes to the development of a more accurate and reliable pedestrian navigation system by leveraging smartphone IMU data and advanced algorithms for turn detection in indoor environments.

eess.SP

Simulation of Medium-Frequency R-Mode Signal Strength

Assuming failure in the global navigation satellite systems due to radio frequency interference and ionospheric anomaly, an R-Mode system, a terrestrial integrated navigation system, is being actively studied for domestic deployment in South Korea. In this study, parameters for an approximate calculation of the received signal strength were obtained and applied to develop a performance simulation tool for a medium-frequency R-Mode system. As a case study, the signal strength from the Yeongju transmitter was simulated using the proposed parameters.

eess.SP

Construction of the Radio Map with Defective GPS Position Information

The basic idea of RSS-based indoor positioning is to estimate the receiver location by matching the measured received signal strength indicator (RSSI) with preestablished RSSI collections with corresponding locations, known as the radio map. Hence, constructing an accurate radio map directly relates to accurate positioning performance in RSS-based indoor positioning. RSS-based indoor positioning can be easily conducted with a radio map that surveys every location, but a complete radio map cannot be constructed when the map area includes locations that are physically impossible to reach or denied access. In addition, measurement errors or device problems can occur during the survey, resulting in degradation of the radio map. We analyzed incidents that occurred in actual RSSI surveys that could disrupt the construction of the radio map and proposed methods to construct a more accurate radio map.

eess.SY

Enhanced Accuracy Simulator for a Future Korean Nationwide eLoran System

The Global Positioning System (GPS) has become the most widely used positioning, navigation, and timing system. However, the vulnerability of GPS to radio frequency interference has attracted significant attention. After experiencing several incidents of intentional high-power GPS jamming trials by North Korea, South Korea decided to deploy the enhanced long-range navigation (eLoran) system, which is a high-power terrestrial radio-navigation system that can complement GPS. As the first phase of the South Korean eLoran program, an eLoran testbed system was recently developed and declared operational on June 1, 2021. Once its operational performance is determined to be satisfactory, South Korea plans to move to the second phase of the program, which is a nationwide eLoran system. For the optimal deployment of additional eLoran transmitters in a nationwide system, it is necessary to properly simulate the expected positioning accuracy of the said future system. In this study, we propose enhanced eLoran accuracy simulation methods based on a land cover map and transmitter jitter estimation. Using actual measurements over the country, the simulation accuracy of the proposed methods was confirmed to be approximately 10%-91% better than that of the existing Loran (i.e., Loran-C and eLoran) positioning accuracy simulators depending on the test locations.

eess.SP

Effect of Outlier Removal from Temporal ASF Corrections on Multichain Loran Positioning Accuracy

The widely used global navigation satellite systems (GNSSs) are vulnerable to radio frequency interference (RFI). Long-range navigation (Loran), a terrestrial navigation system, can compensate for this weakness; however, it suffers from low positioning accuracy, and studies are under way to improve its positioning performance. One such study has proposed the multichain Loran positioning method that uses the signals of transmitting stations belonging to different chains. Although the multichain Loran positioning performance is superior to the performance of conventional methods, the additional secondary factor (ASF) can still degrade its positioning accuracy. To mitigate the effects of temporal ASF, which is one of the ASF components, it is necessary to obtain temporal correction data from a nearby reference station at a known location. In this study, an experiment is performed to verify the effect of removing the outliers in the temporal correction data on the multichain Loran positioning accuracy.

eess.SP

Development of Record and Management Software for GPS/Loran Measurements

In this paper, a software implementation that records Global Positioning System (GPS) and long-range navigation (Loran) measurement data output from an integrated GPS/Loran receiver and organizes them based on time is proposed. The purpose of the developed software is to collect measurements from multiple Loran transmitter chains for performance analysis of navigation methods using Loran, and to organize the data based on time to make it easy to use them. In addition, GPS measurements are also collected and managed as ground truth data for performance analysis. The implemented software consists of three modules: recording, classification, and conversion. The recording module records raw text data streamed from the receiver, and the classification module classifies the recorded text data according to the message format. The conversion module parses the classified text data, sorts GPS and Loran measurements based on timestamp, and outputs them according to the software platform of the user to analyze the measurements. Each module of the software runs automatically without user intervention. The functionality of the implemented software was verified using GPS and Loran measurements collected over 24 h from an actual integrated GPS/Loran receiver.

eess.SP