arXiv subjects

Jordan Diaz

Publications and source records attributed to Jordan Diaz.

7 recordsLinked to original sources

arXiv2026

Demonstrating the integration of a photonic lantern with an all-fiber-based nulling interferometer

High-contrast imaging of Solar System scale exoplanets and protoplanets demands advancements in instrumentation to access deeper starlight suppression at smaller angular separations than today's state-of-the-art. The multi-mode to single-mode conversion capabilities of photonic lanterns (PLs) provide new avenues to implement techniques such as nulling interferometry due to the inherent spatial filtering of single-mode waveguides. In this work, we present laboratory results on an all-fiber-based focal plane nulling interferometer using off-the-shelf components operating at 1550 nm. We demonstrate the implementation of a PL for coupling light into the instrument, and compare it to the case when laser light is directly fed into the interferometer. The integration of a PL with the interferometer evidences their potential for feeding photonic-based science instruments. Additionally, we discuss expanding the concept of the instrument for the detection of accreting protoplanets.

astro-ph.IM↗

arXiv2026

Experimentally-determined performance limits for joint imaging and wavefront sensing with a photonic lantern

The photonic lantern (PL) is a focal-plane wavefront sensor (WFS) that can be used for second-stage control of extreme adaptive optics (AO) systems. While the number of sensed modes and the dynamic range with respect to each mode have been relatively well characterized, little attention has been paid to the PL's sensitivity, i.e. how measurement noise impacts the accuracy of PL wavefront reconstruction. We compute the PL's sensitivity to photon noise as a function of spatial frequency, and compare it to existing WFSs, using simulations as well as experiments on the muirSEAL testbed. We further assess these metrics in the case where only a subset of PL ports are available for wavefront sensing. In this configuration, the remaining ports are used to spatially and spectrally reconstruct the observed scene using algorithms such as SPADE. Using more ports for wavefront sensing enables greater aberration sensitivity but leaves less spatial information for image reconstruction. This allows us to trade off between fewer samples with smaller aberrations and more samples with larger aberrations. This work sets the stage for AO system design incorporating the PL as a joint WFS and imager.

astro-ph.IM↗

arXiv2025

On-sky demonstration of second-stage wavefront control with a photonic lantern

Ground-based direct imaging of exoplanets at high contrast requires precise correction of atmospheric turbulence using adaptive optics (AO). The planet-to-star contrast ratio at small angular separations from the host star is often limited by non-common-path aberrations (NCPAs) seen only in the science plane. The photonic lantern (PL) can be used to sense aberrations at the final science imaging plane. This enables a two-stage wavefront control architecture, in which the first-stage wavefront sensor senses atmospheric turbulence and the PL senses NCPAs and other aberrations not seen by the first stage. We demonstrate closed-loop control of residual wavefront errors using a non-dispersed PL after first-stage AO correction on the Shane 3m telescope at Lick Observatory. Our results show that non-dispersed PLs can be used for second-stage wavefront sensing, enabling performance improvements via minimally invasive retrofits to existing AO systems.

astro-ph.IM↗

arXiv2025

The Santa Cruz Extreme AO Lab (SEAL) 2.0: A reflective, multi-wavelength rebuild

The Santa cruz Extreme Adaptive optics Lab (SEAL) is a visible/near-infrared wavelength testbed designed to support technology development for high contrast imaging on large, segmented, ground-based telescopes. SEAL saw first light in 2021 as a transmissive, visible-wavelength AO testbed. In this paper, we present four major upgrades to SEAL: (1) the testbed has been rebuilt with custom off-axis parabolic mirrors, enabling operation in both near-infrared and visible wavelengths; (2) the suite of wavefront sensors now includes a Shack-Hartmann, transmissive four-sided pyramid, vector-Zernike, and, in the muirSEAL testbed, a photonic lantern; (3) the testbed includes a vector-vortex coronagraph and will soon include a hybrid astrophotonic coronagraph; (4) in addition to its original Keck-heritage RTC, SEAL now includes two additional control software packages: Catkit, originally developed for the HiCAT testbed at the Space Telescope Science Institute, and the RTC Compute And Control for Adaptive Optics (CACAO), originally designed for Subaru/SCExAO. We discuss the performance of the testbed after the reflective rebuild and on-going technology development work at SEAL.

astro-ph.IM↗

arXiv2025

Experimental validation of photonic lantern imaging and wavefront sensing performance

Photonic lanterns (PLs) are fiber-based waveguides that are capable of focal-plane wavefront sensing while simultaneously directing light to downstream science instruments. The optimal choice of wavefront reconstruction algorithm has yet to be determined, and likely depends on the particular observing scenario under consideration. Previous work in simulation suggests that PLs can be used for nonlinear wavefront sensing for several applications, including sensing the low-wind effect and correcting large-amplitude aberrations. We present the design of muirSEAL (miniature IR SEAL), a testbed designed to test PL wavefront reconstruction over Zernike modes and segmented-mirror offsets. We demonstrate throughput and linear wavefront reconstruction at multiple f-numbers. We further present initial laboratory imaging of a new photonic lantern fabricated at Lawrence Livermore National Laboratory.

astro-ph.IM↗

arXiv2024

Laboratory demonstration of an all-fiber-based focal plane nulling interferometer

Starlight suppression techniques for High-Contrast Imaging (HCI) are crucial to achieving the demanding contrast ratios and inner working angles required for detecting and characterizing exoplanets with a wide range of masses and separations. The advent of photonic technologies provides new opportunities to control the amplitude and phase characteristics of light, with the potential to enhance and control starlight suppression. Here, we present a focal plane optical-fiber-based nulling interferometer working with commercially available components for amplitude and phase modulation. The instrument implements single-mode fiber-coupled elements: a MEMS variable optical attenuator (VOA) matches the on-axis and off-axis starlight amplitude, while a piezoelectric-driven fiber stretcher modifies the optical path difference between the channels to achieve the $\pi$ phase shift condition for destructive interference. We show preliminary lab results using a narrowband light source working at 632 nm and discuss future opportunities for testing on-sky with the Astrophotonics Advancement Platform at Lick Observatory (APALO) at the Shane 3-m Telescope.

astro-ph.IM↗

arXiv2024

Photonic lantern wavefront reconstruction in a multi-wavefront sensor single-conjugate adaptive optics system

Exoplanet direct imaging using adaptive optics (AO) is often limited by non-common path aberrations (NCPAs) and aberrations that are invisible to traditional pupil-plane wavefront sensors (WFSs). This can be remedied by focal-plane (FP) WFSs that characterize aberrations directly from a final science image. Photonic lanterns (PLs) can act as low-order FPWFSs with the ability to direct some light to downstream science instruments. Using a PL on the SEAL (Santa Cruz Extreme AO Laboratory) high-contrast imaging testbed, we demonstrate (1) linear ranges and (2) closed-loop control. Additionally, we simulate the use of the PL in a multi-wavefront sensor AO system, in which multiple WFSs feed back to the same common-path deformable mirror. Building on previous multi-WFS AO demonstrations on SEAL, we simulate a modulated pyramid WFS to sense aberrations of high spatial order and large amplitude, and the PL to sense low order aberrations including NCPAs. We assess adaptive optics performance in this setting using three different PL wavefront reconstruction algorithms. We also provide a new method to experimentally identify the propagation matrix of a PL, making advanced model-based algorithms practical. This work demonstrates the role of photonic technologies and multi-stage wavefront sensing in the context of extreme AO and high contrast imaging.

astro-ph.IM↗