arXiv subjects

Jordan Stone

Publications and source records attributed to Jordan Stone.

At least 37 records · Page 2Linked to original sources

arXiv2023

The JWST Early Release Science Program for Direct Observations of Exoplanetary Systems: Best Practices for Data Collection in Cycle 2 and Beyond

We present a set of recommended best practices for JWST data collection for members of the community focussed on the direct imaging and spectroscopy of exoplanetary systems. These findings and recommendations are based on the early analysis of the JWST Early Release Science Program 1386, "High-Contrast Imaging of Exoplanets and Exoplanetary Systems with JWST." Our goal is for this information to be useful for observers in preparation of JWST proposals for Cycle 2 and beyond. In addition to compiling a set of best practices from our ERS program, in a few cases we also draw on the expertise gained within the instrument commissioning programs, as well as include a handful of data processing best practices. We anticipate that this document will be regularly updated and resubmitted to arXiv.org to ensure that we have distributed our knowledge of best-practices for data collection as widely and efficiently as possible.

astro-ph.IM↗

arXiv2022

High-performance microresonator optical parametric oscillator on a silicon chip

Optical parametric oscillation (OPO) is distinguished by its wavelength access, that is, the ability to flexibly generate coherent light at wavelengths that are dramatically different from the pump laser, and in principle bounded solely by energy conservation between the input pump field and the output signal/idler fields. As society adopts advanced tools in quantum information science, metrology, and sensing, microchip OPO may provide an important path for accessing relevant wavelengths. However, a practical source of coherent light should additionally have high conversion efficiency and high output power. Here, we demonstrate a silicon photonics OPO device with unprecedented performance. Our OPO device, based on the third-order ($χ^{(3)}$) nonlinearity in a silicon nitride microresonator, produces output signal and idler fields widely separated from each other in frequency ($>$150 THz), and exhibits a pump-to-idler conversion efficiency up to 29 $\%$ with a corresponding output idler power of $>$18 mW on-chip. This performance is achieved by suppressing competitive processes and by strongly overcoupling the output light. This methodology can be readily applied to existing silicon photonics platforms with heterogeneously-integrated pump lasers, enabling flexible coherent light generation across a broad range of wavelengths with high output power and efficiency.

physics.optics↗

arXiv2022

Design of SCALES: A 2-5 Micron Coronagraphic Integral Field Spectrograph for Keck Observatory

We present the design of SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) a new 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. SCALES enables low-resolution (R~50) spectroscopy, as well as medium-resolution (R~4,000) spectroscopy with the goal of discovering and characterizing cold exoplanets that are brightest in the thermal infrared. Additionally, SCALES has a 12x12" field-of-view imager that will be used for general adaptive optics science at Keck. We present SCALES's specifications, its science case, its overall design, and simulations of its expected performance. Additionally, we present progress on procuring, fabricating and testing long lead-time components.

astro-ph.IM↗

arXiv2021

Hybrid-mode-family Kerr optical parametric oscillation for robust coherent light generation on chip

Optical parametric oscillation (OPO) using the third-order nonlinearity ($χ^{(3)}$) in integrated photonics platforms is an emerging approach for coherent light generation, and has shown great promise in achieving broad spectral coverage with small device footprints and at low pump powers. However, current $χ^{(3)}$ nanophotonic OPO devices use pump, signal, and idler modes of the same transverse spatial mode family. As a result, such single-mode-family OPO (sOPO) is inherently sensitive in dispersion and can be challenging to scalably fabricate and implement. In this work, we propose to use different families of transverse spatial modes for pump, signal, and idler, which we term as hybrid-mode-family OPO (hOPO). We demonstrate its unprecedented robustness in dispersion versus device geometry, pump frequency, and temperature. Moreover, we show the capability of the hOPO scheme to generate a few milliwatts of output signal power with a power conversion efficiency of approximately 8 $\%$ and without competitive processes. The hOPO scheme is an important counterpoint to existing sOPO approaches, and is particularly promising as a robust method to generate coherent on-chip visible and infrared light sources.

physics.optics↗

arXiv2021

Imaging low-mass planets within the habitable zones of nearby stars with ground-based mid-infrared imaging

Giant exoplanets on 10-100 au orbits have been directly imaged around young stars. The peak of the thermal emission from these warm young planets is in the near-infrared (~1-5 microns), whereas mature, temperate exoplanets (i.e., those within their stars' habitable zones) radiate primarily in the mid-infrared (mid-IR: ~10 microns). If the background noise in the mid-IR can be mitigated, then exoplanets with low masses--including rocky exoplanets--can potentially be imaged in very deep exposures. Here, we review the recent results of the Breakthrough Watch/New Earths in the Alpha Centauri Region (NEAR) program on the Very Large Telescope (VLT) in Chile. NEAR pioneered a ground-based mid-IR observing approach designed to push the capabilities for exoplanet imaging with a specific focus on the closest stellar system, Alpha Centauri. NEAR combined several new optical technologies--including a mid-IR optimized coronagraph, adaptive optics system, and rapid chopping strategy to mitigate noise from the central star and thermal background within the habitable zone. We focus on the lessons of the VLT/NEAR campaign to improve future instrumentation--specifically on strategies to improve noise mitigation through chopping. We also present the design and commissioning of the Large Binocular Telescope's Exploratory Survey for Super-Earths Orbiting Nearby Stars (LESSONS), an experiment in the Northern hemisphere that is building on what was learned from NEAR to further push the sensitivity of mid-IR imaging. Finally, we briefly discuss some of the possibilities that mid-IR imaging will enable for exoplanet science.

astro-ph.IM↗

arXiv2020

ELT Imaging of MWC 297 from the 23-m LBTI: Complex Disk Structure and a Companion Candidate

Herbig Ae/Be stars represent the early outcomes of star formation and the initial stages of planet formation at intermediate stellar masses. Understanding both of these processes requires detailed characterization of their disk structures and companion frequencies. We present new 3.7 micron imaging of the Herbig Be star MWC 297 from non-redundant masking observations on the phase-controlled, 23-m Large Binocular Telescope Interferometer. The images reveal complex disk structure on the scales of several au, as well as a companion candidate. We discuss physical interpretations for these features, and demonstrate that the imaging results are independent of choices such as priors, regularization hyperparameters, and error bar estimates. With an angular resolution of ~17 mas, these data provide the first robust ELT-resolution view of a distant young star.

astro-ph.SR↗

arXiv2020

Betelgeuse scope: Single-mode-fibers-assisted optical interferometer design for dedicated stellar activity monitoring

Betelgeuse has gone through a sudden shift in its brightness and dimmed mysteriously. This is likely caused by a hot blob of plasma ejected from Betelgeuse and then cooled to obscuring dust. If true, it is a remarkable opportunity to directly witness the formation of dust around a red supergiant star. Today's optical telescope facilities are not optimized for time-evolution monitoring of the Betelgeuse surface, so in this work, we propose a low-cost optical interferometer. The facility will consist of $12 \times 4$ inch optical telescopes mounted on the surface of a large radio dish for interferometric imaging; polarization-maintaining single-mode fibers will carry the coherent beams from the individual optical telescopes to an all-in-one beam combiner. A fast steering mirror assisted fiber injection system guides the flux into fibers. A metrology system senses vibration-induced piston errors in optical fibers, and these errors are corrected using fast-steering delay lines. We will present the design.

astro-ph.IM↗

arXiv2020

On the Chemical Abundance of HR 8799 and the Planet c

Comparing chemical abundances of a planet and the host star reveals the origin and formation path. Stellar abundance is measured with high-resolution spectroscopy. Planet abundance, on the other hand, is usually inferred from low-resolution data. For directly imaged exoplanets, the data are available from a slew of high-contrast imaging/spectroscopy instruments. Here, we study the chemical abundance of HR 8799 and its planet c. We measure stellar abundance using LBT/PEPSI (R=120,000) and archival HARPS data: stellar [C/H], [O/H], and C/O are 0.11$\pm$0.12, 0.12$\pm$0.14, and 0.54$^{+0.12}_{-0.09}$, all consistent with solar values. We conduct atmospheric retrieval using newly obtained Subaru/CHARIS data together with archival Gemini/GPI and Keck/OSIRIS data. We model the planet spectrum with petitRADTRANS and conduct retrieval using PyMultiNest. Retrieved planetary abundance can vary by $\sim$0.5 dex, from sub-stellar to stellar C and O abundances. The variation depends on whether strong priors are chosen to ensure a reasonable planet mass. Moreover, comparison with previous works also reveals inconsistency in abundance measurements. We discuss potential issues that can cause the inconsistency, e.g., systematics in individual data sets and different assumptions in the physics and chemistry in retrieval. We conclude that no robust retrieval can be obtained unless the issues are fully resolved.

astro-ph.EP↗

arXiv2020

First Images of the Protoplanetary Disk Around PDS 201

Scattered light imaging has revealed nearly a dozen circumstellar disks around young Herbig Ae/Be stars$-$enabling studies of structures in the upper disk layers as potential signs of on-going planet formation. We present the first images of the disk around the variable Herbig Ae star PDS 201 (V* V351 Ori), and an analysis of the images and spectral energy distribution through 3D Monte-Carlo radiative transfer simulations and forward modelling. The disk is detected in three datasets with LBTI/LMIRCam at the LBT, including direct observations in the $Ks$ and $L'$ filters, and an $L'$ observation with the 360$^\circ$ vector apodizing phase plate coronagraph. The scattered light disk extends to a very large radius of $\sim$250 au, which places it among the largest of such disks. Exterior to the disk, we establish detection limits on substellar companions down to $\sim$5 M$_{Jup}$ at $\gtrsim$1.5" ($\gtrsim$500 au), assuming the Baraffe et al. (2015) models. The images show a radial gap extending to $\sim$0.4" ($\sim$140 au at a distance of 340 pc) that is also evident in the spectral energy distribution. The large gap is a possible signpost of multiple high-mass giant planets at orbital distances ($\sim$60-100 au) that are unusually massive and widely-separated compared to those of planet populations previously inferred from protoplanetary disk substructures.

astro-ph.SR↗

arXiv2020

Thermal Emission in the Southwest Clump of VY CMa

We present high spatial resolution LBTI/NOMIC $9-12$ $μm$ images of VY CMa and its massive outflow feature, the Southwest (SW) Clump. Combined with high-resolution imaging from HST ($0.4-1$ $μm$) and LBT/LMIRCam ($1-5$ $μm$), we isolate the spectral energy distribution (SED) of the clump from the star itself. Using radiative-transfer code DUSTY, we model both the scattered light from VY CMa and the thermal emission from the dust in the clump to estimate the optical depth, mass, and temperature of the SW Clump. The SW Clump is optically thick at 8.9 $μm$ with a brightness temperature of $\sim$200 K. With a dust chemistry of equal parts silicates and metallic iron, as well as assumptions on grain size distribution, we estimate a dust mass of $5.4\times10^{-5}\,M_\odot$. For a gas--to--dust ratio of 100, this implies a total mass of $5.4\times10^{-3}\,M_\odot$. Compared to the typical mass-loss rate of VY CMa, the SW Clump represents an extreme, localized mass-loss event from $\lesssim300$ years ago.

astro-ph.SR↗

arXiv2019

Status of commissioning stabilized infrared Fizeau interferometry with LBTI

The Large Binocular Telescope Interferometer (LBTI) has the longest baseline in the world, 22.7 m, for performing astronomical interferometry in Fizeau mode, which involves beam combination in a focal plane and preserves a wide field-of-view. LBTI can operate in this mode at wavelengths of 1.2 to 5 and 8 to 12 μm, making it a unique platform for carrying out high-resolution imaging of circumstellar disks, evolved stars, solar system objects, and possibly searches for planets, in the thermal infrared. Over the past five years, LBTI has carried out a considerable number of interferometric observations by combining the beams near a pupil plane to carry out nulling interferometry. This mode is useful for measuring small luminosity level offsets, such as those of exozodiacal dust disks. The Fizeau mode, by contrast, is more useful for generating an image of the target because it has more (u, v) (Fourier) plane coverage. However, the Fizeau mode is still in an ongoing process of commissioning. Sensitive Fizeau observations require active phase control, increased automation, and the removal of non-common-path aberrations (NCPA) between the science and phase beams. This increased level of control will increase the fringe contrast, enable longer integrations, and reduce time overheads. We are in the process of writing a correction loop to remove NCPA, and have carried out tests on old and synthetic data. We have also carried out on-sky Fizeau engineering tests in fall 2018 and spring 2019. In this article, we share lessons learned and strategies developed as a result of these tests.

astro-ph.IM↗

arXiv2018

ALES: Overview and Upgrades

The Arizona Lenslets for Exoplanet Spectroscopy (ALES) is the world's first AO-fed thermal infrared integral field spectrograph, mounted inside the Large Binocular Telescope Interferometer (LBTI) on the LBT. An initial mode of ALES allows 3-4 micron spectra at R~20 with 0.026'' spaxels over a 1''x1'' field-of-view. We are in the process of upgrading ALES with additional wavelength ranges, spectral resolutions, and plate scales allowing a broad suite of science that takes advantage of ALES's unique ability to work at wavelengths >2 microns, and at the diffraction limit of the LBT's full 23.8 meter aperture.

astro-ph.IM↗

arXiv2018

The TRENDS High-Contrast Imaging Survey. VII. Discovery of a Nearby Sirius-like White Dwarf System (HD 169889)

Monitoring the long-term radial velocity (RV) and acceleration of nearby stars has proven an effective method for directly detecting binary and substellar companions. Some fraction of nearby RV trend systems are expected to be comprised of compact objects that likewise induce a systemic Doppler signal. In this paper, we report the discovery of a white dwarf companion found to orbit the nearby ($π= 28.297 \pm 0.066$ mas) G9 V star HD 169889. High-contrast imaging observations using NIRC2 at Keck and LMIRCam at the LBT uncover the ($ΔH = 9.76 \pm 0.16$, $ΔL' = 9.60 \pm 0.03$) companion at an angular separation of 0.8'' (28 au). Thirteen years of precise Doppler observations reveal a steep linear acceleration in RV time series and place a dynamical constraint on the companion mass of $M \geq 0.369 \pm 0.010 M_{\odot}$. This "Sirius-like" system adds to the census of white dwarf companions suspected to be missing in the solar neighborhood.

astro-ph.SR↗

arXiv2018

Towards controlled Fizeau observations with the Large Binocular Telescope

The Large Binocular Telescope Interferometer (LBTI) can perform Fizeau interferometry in the focal plane, which accesses spatial information out to the LBT's full 22.7-m edge-to-edge baseline. This mode has previously been used to obtain science data, but has been limited to observations where the optical path difference (OPD) between the two beams is not controlled, resulting in unstable fringes on the science detectors. To maximize the science return, we are endeavoring to stabilize the OPD and tip-tilt variations and make the LBTI Fizeau mode optimized and routine. Here we outline the optical configuration of LBTI's Fizeau mode and our strategy for commissioning this observing mode.

astro-ph.IM↗

arXiv2018

Detection of intrinsic source structure at ~3 Schwarzschild radii with Millimeter-VLBI observations of SAGITTARIUS A*

We report results from very long baseline interferometric (VLBI) observations of the supermassive black hole in the Galactic center, Sgr A*, at 1.3 mm (230 GHz). The observations were performed in 2013 March using six VLBI stations in Hawaii, California, Arizona, and Chile. Compared to earlier observations, the addition of the APEX telescope in Chile almost doubles the longest baseline length in the array, provides additional {\it uv} coverage in the N-S direction, and leads to a spatial resolution of $\sim$30 $μ$as ($\sim$3 Schwarzschild radii) for Sgr A*. The source is detected even at the longest baselines with visibility amplitudes of $\sim$4-13% of the total flux density. We argue that such flux densities cannot result from interstellar refractive scattering alone, but indicate the presence of compact intrinsic source structure on scales of $\sim$3 Schwarzschild radii. The measured nonzero closure phases rule out point-symmetric emission. We discuss our results in the context of simple geometric models that capture the basic characteristics and brightness distributions of disk- and jet-dominated models and show that both can reproduce the observed data. Common to these models are the brightness asymmetry, the orientation, and characteristic sizes, which are comparable to the expected size of the black hole shadow. Future 1.3 mm VLBI observations with an expanded array and better sensitivity will allow a more detailed imaging of the horizon-scale structure and bear the potential for a deep insight into the physical processes at the black hole boundary.

astro-ph.GA↗

arXiv2018

Thermal and Nonlinear Dissipative-Soliton Dynamics in Kerr Microresonator Frequency Combs

We explore the dynamical response of dissipative Kerr solitons to changes in pump power and detuning and show how thermal and nonlinear processes couple these parameters to the frequency-comb degrees of freedom. Our experiments are enabled by a Pound-Drever-Hall (PDH) stabilization approach that provides on-demand, radiofrequency control of the frequency comb. PDH locking not only guides Kerr-soliton formation from a cold microresonator, but opens a path to decouple the repetition and carrier-envelope-offset frequencies. In particular, we demonstrate phase stabilization of both Kerr-comb degrees-of-freedom to a fractional frequency precision below 10^-16, compatible with optical-timekeeping technology. Moreover, we investigate the fundamental role that residual laser-resonator detuning noise plays in the spectral purity of microwave generation with Kerr combs.

physics.optics↗

arXiv2017

An Integrated-Photonics Optical-Frequency Synthesizer

Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.

physics.app-ph↗

arXiv2016

Persistent Asymmetric Structure of Sagittarius A* on Event Horizon Scales

The Galactic Center black hole Sagittarius A* (Sgr A*) is a prime observing target for the Event Horizon Telescope (EHT), which can resolve the 1.3 mm emission from this source on angular scales comparable to that of the general relativistic shadow. Previous EHT observations have used visibility amplitudes to infer the morphology of the millimeter-wavelength emission. Potentially much richer source information is contained in the phases. We report on 1.3 mm phase information on Sgr A* obtained with the EHT on a total of 13 observing nights over 4 years. Closure phases, the sum of visibility phases along a closed triangle of interferometer baselines, are used because they are robust against phase corruptions introduced by instrumentation and the rapidly variable atmosphere. The median closure phase on a triangle including telescopes in California, Hawaii, and Arizona is nonzero. This result conclusively demonstrates that the millimeter emission is asymmetric on scales of a few Schwarzschild radii and can be used to break 180-degree rotational ambiguities inherent from amplitude data alone. The stability of the sign of the closure phase over most observing nights indicates persistent asymmetry in the image of Sgr A* that is not obscured by refraction due to interstellar electrons along the line of sight.

astro-ph.GA↗