SearcharxivSearch

arXiv subjects

Jordi Romeu

Publications and source records attributed to Jordi Romeu.

5 recordsLinked to original sources

Optically Pumped Magnetometer with High Spatial Resolution Magnetic Guide for the Detection of Magnetic Droplets in a Microfluidic Channel

Quantum sensors provide unprecedented magnetic field detection sensitivities, enabling these to extend the common magnetometry range of applications and environments of operation. In this framework, many applications also require high spatial resolution magnetic measurements for biomedical research, environmental monitoring and industrial production. In this regard, Optically Pumped Magnetometers (OPMs) are considered as prominent candidates, but are impaired in size with micrometer scale magnetic particles, e.g. magnetic droplets. In order to address this limitation, here we study the effects of adding a micrometer-to-millimeter magnetic guide to a miniature OPM. This device is applied to detect Fe3O4 magnetic droplets flowing at rates up to $25$ drop./s in a microfluidic channel. The computed spatial resolution is $300$ $μ$m and the measured SNR is larger than $15$ dB for the different sizes of considered magnetic droplets.

physics.app-ph

Mie Scattering with 3D Angular Spectrum Method

Mie theory is a powerful method to model electromagnetic scattering from a multilayered sphere. Usually, the incident beam is expanded to its vector spherical harmonic representation defined by beam shape coefficients, and the multilayer sphere scattering is obtained by the T-matrix method. However, obtaining the beam shape coefficients for arbitrarily shaped incident beams has limitations on source locations and requires different methods when the incident beam is defined inside or outside the computational domain or at the scatterer surface. We propose a 3D angular spectrum method for defining beam shape coefficients from arbitrary source field distributions. This method enables the placement of the sources freely within the computational domain without singularities, allowing flexibility in beam design. We demonstrate incident field synthesis and spherical scattering by comparing morphology-dependent resonances to known values, achieving excellent matching and high accuracy. Additionally, we present mathematical proof to support our proposal. The proposed method has significant benefits for optical systems and inverse beam design. It allows for the analysis of electromagnetic forward/backward propagation between optical elements and spherical targets using a single method. It is also valuable for optical force beam design and analysis.

physics.optics

Superheterodyne Microwave System for the Detection of Bioparticles with Coplanar Electrodes on a Microfluidic Platform

The combination of microwave and microfluidic technologies has the potential to enable wireless monitoring and interaction with bioparticles, facilitating in this way the exploration of a still largely uncharted territory at the intersection of biology, communication engineering and microscale physics. Opportunely, the scientific and technical requirements of microfluidics and microwave techniques converge to the need of system miniaturization to achieve the required sensitivity levels. This work, therefore, presents the design and optimization of a measurement system for the detection of bioparticles over the frequency range $0.01$ to $10$ $\mathrm{GHz}$, with different coplanar electrodes configurations on a microfluidic platform. The design of the measurement signal-chain setup is optimized for a novel real-time superheterodyne microwave detection system. In particular, signal integrity is achieved by means of a microwave-shielded chamber, which is protected from external electromagnetic interference that may potentially impact the coplanar electrodes mounted on the microfluidic device. Additionally, analytical expressions and experimental validation of the system-level performance are provided and discussed for the different designs of the coplanar electrodes. This technique is applied to measure the electrical field perturbation produced by $10$ $\mathrm{μm}$ polystyrene beads with a concentration of $10^5$ $\mathrm{beads/mL}$, and flowing at a rate of $10$ $\mathrm{μL/m}$. The achieved SNR is in the order of $40$ $\mathrm{dB}$ for the three coplanar electrodes considered.

eess.SY

Coupling to longitudinal modes in spherical thin shells illuminated by submillimeter wave Gaussian beam: applications to corneal sensing

Coupling to longitudinal modes of thin spherical shells, under Gaussian-beam illumination, was explored with a theoretical method based on Fourier-optics analysis and vector spherical harmonics. The illumination frequency band was fixed between 100-600 GHz and the outer spherical shell radius of curvature and thickness are 7.5 mm and 0.5 mm, respectively. The shell material was either the lossless cornea or an aqueous effective media representing the cornea. Six different beam-target strategies were introduced being potential candidates for maximum coupling. Two dispersion-tuned beam ensembles with strongly frequency-dependent phase center location have been created with a fixed incident beam 1/e radius and radius of curvature called forward strategies. These computations of different alignments were continued with four beam ensembles of frequency-invariant phase center, constructed from fits to experimental data, oriented at four different axial locations with respect to the spherical shell center of curvature, they are called reverse strategies. Coupling efficiency for all strategies was calculated for different targets including PEC sphere, air-core, and PEC core covered by a cornea loss-free layer and cornea. All scattering strategies contrasted to scattering from equivalent planar targets as a reference with maximum coupling. The results show that, under an ideal calibration, forward strategies are a closer approximation to the plane-wave condition. However, target properties influence the coupling efficiency remarkably for instance the observed difference in cornea scattering is vanishingly small as dielectric loss limits walk-off loss. Furthermore, under perturbed calibration, the forward strategies showed less sensitivity.

physics.med-ph

Transpolarising Trihedral Corner Reflector Characterisation Using a GB-SAR System

The use of a low profile, light weight and easy to fabricate transpolarising surface placed on one side of a trihedral corner reflector (TCR) as polarimetric calibrator is presented in this letter. The transpolarising-TCR (TTCR) presents a high backscattered cross-polar response contrary to standard TCRs. The performance of this device has been tested at X-band using the UPC GB-SAR.

physics.ins-det