arXiv subjects

Jorge Gomez-Ponce

Publications and source records attributed to Jorge Gomez-Ponce.

13 recordsLinked to original sources

arXiv2026

WiLoc: Massive Measured Dataset of Wi-Fi Channel State Information with Application to Machine-Learning Based Localization

Localization is a key component of the wireless ecosystem. Machine learning (ML)-based localization using channel state information (CSI) is one of the most popular methods for achieving high-accuracy localization with low cost. However, to be accurate and robust, ML-based algorithms need to be trained and tested with large amounts of data, covering not only many user equipment (UE)/target locations, but also many different access points (APs) locations to which the UEs connect, in a variety of different environment types. This paper presents a massive-sized CSI dataset, WiLoc (Wi-Fi Localization), and makes it publicly available. WiLoc is obtained by a series of precision measurement campaigns that span three months, and it is massive in all the above-mentioned three dimensions: > 12 million UE locations, > 3,000 APs, covering 16 buildings for indoor localization, and > 30 streets for outdoor use. The paper describes the dataset structure, measurement environments, measurement protocols, and the dataset validations. Comprehensive case studies validate the advantages of large datasets in ML-driven localization strategies for both "standard" and transfer learning. We envision this dataset, which is by far the largest of its kind, to become a standard resource for researchers in the field of ML-based localization.

eess.SP↗

arXiv2024

Ultra-Wideband Double-Directional Channel Measurements and Statistical Modeling in Urban Microcellular Environments for the Upper-Midband/FR3

The upper midband, designated as Frequency Range 3 (FR3), is increasingly critical for the next-generation of wireless networks. Channel propagation measurements and their statistical analysis are essential first steps towards this direction. This paper presents a comprehensive ultra-wideband (UWB) double-directional channel measurement campaign in a large portion of FR3 (6-14 GHz) for urban microcellular environments. We analyze over 25,000 directional power delay profiles and providing key insights into line-of-sight (LoS) and obstructed line-of-sight (OLoS) conditions. This is followed by statistical modeling of path loss, shadowing, delay spread and angular spread. As the first UWB double-directional measurement campaign in this frequency range, this work offers critical insights for spectrum allocation, channel modeling, and the design of advanced communication systems, paving the way for further exploration of FR3.

eess.SY↗

arXiv2024

An Ultra-Wideband Study of Vegetation Impact on Upper Midband / FR3 Communication

Growing demand for high data rates is driving interest in the upper mid-band (FR 3) spectrum (6-24 GHz). While some propagation measurements exist in literature, the impact of vegetation on link performance remains under-explored. This study examines vegetation-induced losses in an urban scenario across 6-18 GHz. A simple method for calculating vegetation depth is introduced, along with a model that quantifies additional attenuation based on vegetation depth and frequency, divided into 1 GHz sub-bands. We see that excess vegetation loss increases with vegetation depth and higher frequencies. These findings provide insights for designing reliable, foliage-aware communication networks in FR 3.

eess.SP↗

arXiv2024

Ultra-wideband Double-Directionally Resolved Channel Measurements of Line-of-Sight Microcellular Scenarios in the Upper Mid-band

The growing demand for higher data rates and expanded bandwidth is driving the exploration of new frequency ranges, including the upper mid-band spectrum (6-24 GHz), which is a promising candidate for future Frequency Range 3 (FR3) applications. This paper presents ultra-wideband double-directional channel measurements in line-of-sight microcellular scenarios within the upper mid-band spectrum (6-18 GHz). Conducted in an urban street canyon environment, these measurements explore key channel characteristics such as power delay profiles, angular power spectra, path loss, delay spread, and angular spread to provide insights essential for robust communication system design. Our results reveal that path loss values for both omni-directional and best beam configurations are lower than free-space predictions due to multipath contributions from the environment. Analysis also indicates a high degree of stability in delay spread and angular spread across the entire band, with small variation between sub-bands.

eess.SY↗

arXiv2024

Site-Specific Radio Channel Representation for 5G and 6G

A site-specific radio channel representation (SSCR) takes the surroundings of the communication system into account by considering the environment geometry, including buildings, vegetation, and mobile objects with their material and surface properties. We present methods for an SSCR that is spatially consistent, such that mobile transmitter and receiver cause a correlated time-varying channel impulse response and closely spaced antennas are correctly correlated. An SSCR is composed of a dynamically varying number of multipath components solely defined by the environment geometry and the material of the environmental objects. Hence, the environment geometry is the only natural scenario parameterization and specific calibration procedures shall be avoided. 5G and 6G physical layer technologies are increasingly able to exploit the properties of a wide range of environments from dense urban areas to railways, road transportation, industrial automation, and unmanned aerial vehicles. The channel impulse response in this wide range of scenarios has generally non-stationary statistical properties, i.e., the Doppler spectrum, power delay profile, K-factor and spatial correlation are all spatially variant (or time-variant for mobile receivers). SSCRs will enable research and development of emerging 5G and 6G technologies such as distributed multiple-input multiple-output systems, reconfigurable intelligent surfaces, multi-band communication, and joint communication and sensing. We highlight the state of the art and summarize research directions for future work towards an SSCR.

eess.SP↗

arXiv2024

Large-scale Outdoor Cell-free mMIMO Channel Measurement in an Urban Scenario at 3.5 GHz

The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban environment. We measured impulse responses between over 20,000 potential access point (AP) locations and 80 user equipments (UEs) at 3.5 GHz with 350 MHz bandwidth (BW). Measurements use a "virtual array" approach at the AP and a hybrid switched/virtual approach at the UE. This paper describes the sounder design, measurement environment, data processing, and sample results, particularly the evolution of the power-delay profiles (PDPs) as a function of the AP locations, and its relation to the propagation environment.

eess.SP↗

arXiv2024

Cell-free massive MIMO Channels in an Urban Environment -- Measurements and Channel Statistics

Cell-free massive MIMO (CF-mMIMO), where each user equipment (UE) is connected to multiple access points (APs), is emerging as an important component for 5G and 6G cellular systems. Accurate channel models based on measurements are required to optimize their design and deployment. This paper presents an extensive measurement campaign for CF-mMIMO in an urban environment. A new "virtual AP" technique measures channels between 80 UE locations and more than 20,000 possible microcellular AP locations. Measurements are done at 3.5 GHz carrier frequency with 350 MHz bandwidth (BW). The paper describes the measurement setup and data processing, shows sample results and their physical interpretation, and provides statistics for key quantities such as pathloss, shadowing, delay spread (DS), and delay window. We find pathloss coefficients of 2.9 and 10.4 for line-of-sight (LOS) and non line-of-sight (NLOS), respectively, where the high LOS coefficient is mainly because larger distance leads to more grazing angle of incidence and thus lower antenna gain in our setup. Shadowing standard deviations are 5.1/16.6 dB, and root mean squared (RMS) DSs of -80.6/-72.6 dBs. The measurements can also be used for parameterizing a CUNEC-type model, which will be reported in future work.

eess.SP↗

arXiv2022

Using a Drone Sounder to Measure Channels for Cell-Free Massive MIMO Systems

Measurements of the propagation channel form the basis of all realistic system performance evaluations, as foundation of statistical channel models or to verify ray tracing. This is also true for the analysis of cell-free massive multi-input multi-output (CF-mMIMO) systems in real-world environments. However, such experimental data are difficult to obtain, due to the complexity and expense of deploying tens or hundreds of channel sounder nodes across the wide area a CF-mMIMO system is expected to cover, especially when different configurations and number of antennas are to be explored. In this paper, we provide a novel method to measure channels for CF-mMIMO systems using a channel sounder based on a drone, also known as a small unmanned aerial vehicle (UAV). Such a method is efficient, flexible, simple, and low-cost, capturing channel data from thousands of different access point (AP) locations within minutes. In addition, we provide sample 3.5 GHz measurement results analyzing deployment strategies for APs and make the data open source, so they may be used for various other studies.

eess.SP↗

arXiv2021

THz Band Channel Measurements and Statistical Modeling for Urban Microcellular Environments

The THz band (0.1-10 THz) has attracted considerable attention for next-generation wireless communications, due to the large amount of available bandwidth that may be key to meet the rapidly increasing data rate requirements. Before deploying a system in this band, a detailed wireless channel analysis is required as the basis for proper design and testing of system implementations. One of the most important deployment scenarios of this band is the outdoor microcellular environment, where the Transmitter (Tx) and the Receiver (Rx) have a significant height difference (typically $ \ge 10$ m). In this paper, we present double-directional (i.e., directionally resolved at both link ends) channel measurements in such a microcellular scenario encompassing street canyons and an open square. Measurements are done for a 1 GHz bandwidth between 145-146 GHz and an antenna beamwidth of 13 degree; distances between Tx and Rx are up to 85 m and the Tx is at a height of 11.5 m from the ground. The measurements are analyzed to estimate path loss, shadowing, delay spread, angular spread, and multipath component (MPC) power distribution. These results allow the development of more realistic and detailed THz channel models and system performance assessment.

eess.SP↗

arXiv2021

Energy Efficiency of Uplink Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channel

Cell-free massive MIMO (CF-mMIMO) provides wireless connectivity for a large number of user equipments (UEs) using access points (APs) distributed across a wide area with high spectral efficiency (SE). The energy efficiency (EE) of the uplink is determined by (i) the transmit power control (TPC) algorithms, (ii) the numbers, configurations, and locations of the APs and the UEs, and (iii) the propagation channels between the APs and the UEs. This paper investigates all three aspects, based on extensive (~30,000 possible AP locations and 128 possible UE locations) channel measurement data at 3.5 GHz. We compare three different TPC algorithms, namely maximization of transmit power (max-power), maximization of minimum SE (max-min SE), and maximization of minimum EE (max-min EE) while guaranteeing a target SE. We also compare various antenna arrangements including fully-distributed and semi-distributed systems, where APs can be located on a regular grid or randomly, and the UEs can be placed in clusters or far apart. Overall, we show that the max-min EE TPC is highly effective in improving the uplink EE, especially when no UE within a set of served UEs is in a bad channel condition and when the BS antennas are fully-distributed.

cs.IT↗

arXiv2021

THz Band Channel Measurements and Statistical Modeling for Urban D2D Environments

THz band is envisioned to be used in 6G systems to meet the ever-increasing demand for data rate. However, before an eventual system design and deployment can proceed, detailed channel sounding measurements are required to understand key channel characteristics. In this paper, we present a first extensive set of channel measurements for urban outdoor environments that are ultra-wideband (1 GHz 3dB bandwidth), and double-directional where both the transmitter and receiver are at the same height. In all, we present measurements at 38 Tx/Rx location pairs, consisting of a total of nearly 50,000 impulse responses, at both line-of-sight (LoS) and non-line-of-sight (NLoS) cases in the 1-100 m range. We provide modeling for path loss, shadowing, delay spread, angular spread and multipath component (MPC) power distribution. We find, among other things, that outdoor communication over tens of meters is feasible in this frequency range even in NLoS scenarios, that omni-directional delay spreads of up to 100 ns, and directional delay spreads of up to 10 ns are observed, while angular spreads are also quite significant, and a surprisingly large number of MPCs are observed for 1 GHz bandwidth and 13 degree beamwidth. These results constitute an important first step towards better understanding the wireless channel in the THz band.

eess.SP↗

arXiv2020

Experimental Investigation of Frequency Domain Channel Extrapolation in Massive MIMO Systems for Zero-Feedback FDD

Estimating downlink (DL) channel state information (CSI) in frequency division duplex (FDD) massive multi-input multi-output (MIMO) systems generally requires downlink pilots and feedback overheads. Accordingly, this paper investigates the feasibility of zero-feedback FDD massive MIMO systems based on channel extrapolation. We use the high-resolution parameter estimation (HRPE), specifically the space-alternating generalized expectation-maximization (SAGE) algorithm, to extrapolate the DL CSI based on the extracted parameters of multipath components in the uplink channel. We apply the HRPE to two different channel models: the vector spatial signature (VSS) model and the direction of arrival (DOA) model. We verify these methods through real-world channel data acquired from channel measurement campaigns with two different types of channel sounders: a) a switched array-based, real-time, time-domain, outdoors setup at 3.5 GHz, and b) a virtual array-based, high-accuracy, frequency-domain, indoors setup at 2.4 and 5-7 GHz. The performance metrics of the extrapolated channels that we evaluate include the mean squared error, beamforming efficiency, and spectral efficiency in multiuser MIMO scenarios. The results show that the HRPE-based channel extrapolation performs best under the simple VSS model, which does not require array calibration, and if the BS is in an open outdoor environment having line-of-sight (LOS) paths to well-separated users.

eess.SP↗

arXiv2019

Channel Extrapolation for FDD Massive MIMO: Procedure and Experimental Results

Application of massive multiple-input multiple-output (MIMO) systems to frequency division duplex (FDD) is challenging mainly due to the considerable overhead required for downlink training and feedback. Channel extrapolation, i.e., estimating the channel response at the downlink frequency band based on measurements in the disjoint uplink band, is a promising solution to overcome this bottleneck. This paper presents measurement campaigns obtained by using a wideband (350 MHz) channel sounder at 3.5 GHz composed of a calibrated 64 element antenna array, in both an anechoic chamber and outdoor environment. The Space Alternating Generalized Expectation-Maximization (SAGE) algorithm was used to extract the parameters (amplitude, delay, and angular information) of the multipath components from the attained channel data within the training (uplink) band. The channel in the downlink band is then reconstructed based on these path parameters. The performance of the extrapolated channel is evaluated in terms of mean squared error (MSE) and reduction of beamforming gain (RBG) in comparison to the ground truth, i.e., the measured channel at the downlink frequency. We find strong sensitivity to calibration errors and model mismatch, and also find that performance depends on propagation conditions: LOS performs significantly better than NLOS.

eess.SP↗