arXiv subjects

Jorge Iniguez

Publications and source records attributed to Jorge Iniguez.

At least 37 records · Page 2Linked to original sources

arXiv2008

Understanding the Unique Structural and Electronic Properties of SrFeO2

We report a first-principles study of SrFeO$_2$, an infinite-layer oxide with Fe atoms in a perfect square-planar coordination down to essentially 0 K. Our results reveal this striking behavior relies on the double occupation of the 3$d_{z^2}$ orbitals of high-spin Fe$^{2+}$. Such an electronic state results from the hybridization of iron's 3$d_{z^2}$ and 4$s$ orbitals, which enables a large reduction of the intra-atomic exchange splitting of the $z^2$ electrons. The generality of the phenomenon is discussed.

cond-mat.mtrl-sci↗

arXiv2008

First-principles approach to lattice-mediated magnetoelectric effects

We present a first-principles scheme for the computation of the magnetoelectric response of magnetic insulators. The method focuses on the lattice-mediated part of the magnetic response to an electric field, which we argue can be expected to be the dominant contribution in materials displaying a strong magnetoelectric coupling. We apply our method to Cr2O3, a relatively simple and experimentally well studied magnetoelectric compound.

cond-mat.mtrl-sci↗

arXiv2006

Effects of Vacancies on Properties of Relaxor Ferroelectrics: a First-Principles Study

A first-principles-based model is developed to investigate the influence of lead vacancies on the properties of relaxor ferroelectric Pb(Sc1/2Nb1/2)O3 (PSN). Lead vacancies generate large, inhomogeneous, electric fields that reduce barriers between energy minima for different polarization directions. This naturally explains why relaxors with significant lead vacancy concentrations have broadened dielectric peaks at lower temperatures, and why lead vacancies smear properties in the neighborhood of the ferroelectric transition in PSN. We also reconsider the conventional wisdom that lead vacancies reduce the magnitude of dielectric response.

cond-mat.mtrl-sci↗

arXiv2006

Amorphization induced by pressure: results for zeolites and general implications

We report an {\sl ab initio} study of pressure-induced amorphization (PIA) in zeolites, which are model systems for this phenomenon. We confirm the occurrence of low-density amorphous phases like the one reported by Greaves {\sl et al.} [Science {\bf 308}, 1299 (2005)], which preserves the crystalline topology and might constitute a new type of glass. The role of the zeolite composition regarding PIA is explained. Our results support the correctness of existing models for the basic PIA mechanim, but suggest that energetic, rather than kinetic, factors determine the irreversibility of the transition.

cond-mat.mtrl-sci↗

arXiv2006

Ti-enhanced kinetics of hydrogen absorption and desorption on NaAlH4 surfaces

We report a first-principles study of the energetics of hydrogen absorption and desorption (i.e. H-vacancy formation) on pure and Ti-doped sodium alanate (NaAlH4) surfaces. We find that the Ti atom facilitates the dissociation of H2 molecules as well as the adsorption of H atoms. In addition, the dopant makes it energetically more favorable to creat H vacancies by saturating Al dangling bonds. Interestingly, our results show that the Ti dopant brings close in energy all the steps presumably involved in the absorption and desorption of hydrogen, thus facilitating both and enhancing the reaction kinetics of the alanates. We also discuss the possibility of using other light transition metals (Sc, V, and Cr) as dopants.

cond-mat.mtrl-sci↗

arXiv2006

On the nature of the melting line of bcc sodium

Recent experiments have obtained the melting line of sodium up to pressures of about 130 GPa, finding that the melting line from the {\em bcc} phase reaches a maximum at a temperature of {\em c.a.} 1000 K and a pressure of 31 GPa, and at higher pressures the fusion temperature decreases continuously up to 118 GPa. Here we report results of a study based on first principles molecular dynamics, clarifying the nature of the maximum and subsequent decreasing behavior found in the melting line of sodium.

cond-mat.mtrl-sci↗

arXiv2004

First-principles study of Ti-doped sodium alanate surfaces

We have performed first-principles calculations of thick slabs of Ti-doped sodium alanate (NaAlH_4), which allows to study the system energetics as the dopant progresses from the surface to the bulk. Our calculations predict that Ti stays on the surface, substitutes for Na, and attracts a large number of H atoms to its vicinity. Molecular dynamics simulations suggest that the most likely product of the Ti-doping is the formation of H-rich TiAl_n (n>1) compounds on the surface, and hint at the mechanism by which Ti enhances the reaction kinetics of NaAlH_4.

cond-mat.mtrl-sci↗

arXiv2004

Unusual structural tuning of magnetism in cuprate perovskites

Understanding the structural underpinnings of magnetism is of great fundamental and practical interest. Se_{1-x}Te_{x}CuO_{3} alloys are model systems for the study of this question, as composition-induced structural changes control their magnetic interactions. Our work reveals that this structural tuning is associated with the position of the supposedly dummy atoms Se and Te relative to the super-exchange (SE) Cu--O--Cu paths, and not with the SE angles as previously thought. We use density functional theory, tight-binding, and exact diagonalization methods to unveil the cause of this surprising effect and hint at new ways of engineering magnetic interactions in solids.

cond-mat.mtrl-sci↗

arXiv2004

Multi-phonon scattering and Ti-induced hydrogen dynamics in sodium alanate

We use ab initio methods and neutron inelastic scattering (NIS) to study the structure, energetics, and dynamics of pure and Ti-doped sodium alanate (NaAlH_4), focusing on the possibility of substitutional Ti doping. The NIS spectrum is found to exhibit surprisingly strong and sharp two-phonon features. The calculations reveal that substitutional Ti doping is energetically possible. Ti prefers to substitute for Na and is a powerful hydrogen attractor that facilitates multiple Al--H bond breaking. Our results hint at new ways of improving the hydrogen dynamics and storage capacity of the alanates.

cond-mat.mtrl-sci↗

arXiv2003

Dynamics of Berry-phase polarization in time-dependent electric fields

We consider the flow of polarization current J(t)=dP/dt produced by a homogeneous electric field E(t) or by rapidly varying some other parameter in the Hamiltonian of a solid. For an initially insulating system and a collisionless time evolution, the dynamic polarization P(t) is given by a nonadiabatic version of the King-Smith--Vanderbilt geometric-phase formula. This leads to a computationally convenient form for the Schroedinger equation where the electric field is described by a linear scalar potential handled on a discrete mesh in reciprocal space. Stationary solutions in sufficiently weak static fields are local minima of the energy functional of Nunes and Gonze. Such solutions only exist below a critical field that depends inversely on the density of k points. For higher fields they become long-lived resonances, which can be accessed dynamically by gradually increasing E. As an illustration the dielectric function in the presence of a dc bias field is computed for a tight-binding model from the polarization response to a step-function discontinuity in E(t), displaying the Franz-Keldysh effect.

cond-mat.mtrl-sci↗

arXiv2003

Effects of atomic short-range order on the properties of perovskite alloys in their morphotropic phase boundary

The effects of atomic short-range order on the properties of Pb(Zr_{1-x}Ti_x)O_3 alloy in its morphotropic phase boundary (MPB) are predicted by combining first-principles-based methods and annealing techniques. Clustering is found to lead to a compositional expansion of this boundary, while the association of unlike atoms yields a contraction of this region. Atomic short-range order can thus drastically affect properties of perovskite alloys in their MPB, by inducing phase transitions. Microscopic mechanisms responsible for these effects are revealed and discussed.

cond-mat.mtrl-sci↗

arXiv2003

First-principles study of (BiScO3){1-x}-(PbTiO3){x} piezoelectric alloys

We report a first-principles study of a class of (BiScO3)_{1-x}-(PbTiO3)_x (BS-PT) alloys recently proposed by Eitel et al. as promising materials for piezoelectric actuator applications. We show that (i) BS-PT displays very large structural distortions and polarizations at the morphotropic phase boundary (MPB) (we obtain a c/a of ~1.05-1.08 and P_tet of ~1.1 C/m^2); (ii) the ferroelectric and piezoelectric properties of BS-PT are dominated by the onset of hybridization between Bi/Pb-6p and O-2p orbitals, a mechanism that is enhanced upon substitution of Pb by Bi; and (iii) the piezoelectric responses of BS-PT and Pb(Zr_{1-x}Ti_x)O3 (PZT) at the MPB are comparable, at least as far as the computed values of the piezoelectric coefficient d_15 are concerned. While our results are generally consistent with experiment, they also suggest that certain intrinsic properties of BS-PT may be even better than has been indicated by experiments to date. We also discuss results for PZT that demonstrate the prominent role played by Pb displacements in its piezoelectric properties.

cond-mat.mtrl-sci↗

arXiv2002

Quantitative analysis of the first-principles effective-Hamiltonian approach to ferroelectric perovskites

The various approximations used in the construction of a first-principles effective Hamiltonian for BaTiO3, and their effects on the calculated transition temperatures, are discussed. An effective Hamiltonian for BaTiO3 is constructed not from first-principles calculations, but from the structural energetics of an atomistic shell model for BaTiO3 of Tinte et al. This allows the elimination of certain uncontrolled approximations that arise in the comparison of first-principles effective Hamiltonian results with experimental values and the quantification of errors associated with the selection of the effective Hamiltonian subspace and subsequent projection. The discrepancies in transition temperatures computed in classical simulations for this effective Hamiltonian and for the atomistic shell model are shown to be associated primarily with a poor description of the thermal expansion in the former case. This leads to specific proposals for refinements to the first-principles effective Hamiltonian method. Our results suggest that there are at least two significant sources of error in the effective-Hamiltonian treatment of BaTiO3 in the literature, i.e., the improper treatment of thermal expansion, and the errors inherent in the first-principles approach itself.

cond-mat.mtrl-sci↗

arXiv2002

A First-Principles Approach to Insulators in Finite Electric Fields

We describe a method for computing the response of an insulator to a static, homogeneous electric field. It consists of iteratively minimizing an electric enthalpy functional expressed in terms of occupied Bloch-like states on a uniform grid of k points. The functional has equivalent local minima below a critical field E_c that depends inversely on the density of k points; the disappearance of the minima at E_c signals the onset of Zener breakdown. We illustrate the procedure by computing the piezoelectric and nonlinear dielectric susceptibility tensors of III-V semiconductors.

cond-mat.mtrl-sci↗

arXiv2002

First-principles study of the temperature-pressure phase diagram of BaTiO3

We investigate the temperature-pressure phase diagram of BaTiO_3 using a first-principles effective-Hamiltonian approach. We find that the zero-point motion of the ions affects the form of the phase diagram dramatically. Specifically, when the zero-point fluctuations are included in the calculations, all the polar (tetragonal, orthorhombic, and rhombohedral) phases of BaTiO_3 survive down to 0 K, while only the rhombohedral phase does otherwise. We provide a simple explanation for this behavior. Our results confirm the essential correctness of the phase diagram proposed by Ishidate et al. (Phys. Rev. Lett. 78, 2397 (1997)).

cond-mat.mtrl-sci↗

arXiv2002

Effective-Hamiltonian modeling of external pressures in ferroelectric perovskites

The phase-transition sequence of a ferroelectric perovskite such as BaTiO_3 can be simulated by computing the statistical mechanics of a first-principles derived effective Hamiltonian [Zhong, Vanderbilt and Rabe, Phys. Rev. Lett. 73, 1861 (1994)]. Within this method, the effect of an external pressure (in general, of any external field) can be studied by considering the appropriate "enthalpy" instead of the effective Hamiltonian itself. The legitimacy of this approach relies on two critical assumptions that, to the best of our knowledge, have not been adequately discussed in the literature to date: (i) that the zero-pressure relevant degrees of freedom are still the only relevant degrees of freedom at finite pressures, and (ii) that the truncation of the Taylor expansion of the energy considered in the effective Hamiltonian remains a good approximation at finite pressures. Here we address these issues in detail and present illustrative first-principles results for BaTiO_3. We also discuss how to construct effective Hamiltonians in cases in which these assumptions do not hold.

cond-mat.mtrl-sci↗

arXiv2001

Flat branches and pressure amorphization

After summarizing the phenomenology of pressure amorphization (PA), we present a theory of PA based on the notion that one or more branches of the phonon spectrum soften and flatten with increasing pressure. The theory expresses the anharmonic dynamics of the flat branches in terms of local modes, represented by lattice Wannier functions, which are in turn used to construct an effective Hamiltonian. When the low-pressure structure becomes metastable with respect to the high-pressure equilibrium phase and the relevant branches are sufficiently flat, transformation into an amorphous phase is shown to be kinetically favored because of the exponentially large number of both amorphous phases and reaction pathways. In effect, the critical-size nucleus for the first-order phase transition is found to be reduced to a single unit cell, or nearly so. Random nucleation into symmetrically equivalent local configurations characteristic of the high-pressure structure is then shown to overwhelm any possible domain growth, and an ``amorphous'' structure results.

cond-mat↗

arXiv2001

Ab-initio design of perovskite alloys with predetermined properties: The case of Pb(Sc_{0.5} Nb_{0.5})O_{3}

A first-principles derived approach is combined with the inverse Monte Carlo technique to determine the atomic orderings leading to prefixed properties in Pb(Sc_{0.5}Nb_{0.5})O_{3} perovskite alloy. We find that some arrangements between Sc and Nb atoms result in drastic changes with respect to the disordered material, including ground states of new symmetries, large enhancement of electromechanical responses, and considerable shift of the Curie temperature. We discuss the microscopic mechanisms responsible for these unusual effects.

cond-mat.mtrl-sci↗