arXiv subjects

Jorge Jimenez

Publications and source records attributed to Jorge Jimenez.

16 recordsLinked to original sources

arXiv2026

A Natural $\gtrsim 100\times$ Telescope: Discovery of the Strongly Lensed Type II SN 2025mkn at $z=1.37$

We present the discovery of SN 2025mkn, a gravitationally lensed Type II supernova. First detected as a blue transient in ZTF, 0.83$^{\prime\prime}$ from a $z=0.42$ elliptical galaxy, follow-up SNIFS/UH2.2m and LRIS/Keck spectra revealed absorption lines at $z=1.371$. Later JWST NIRCam imaging shows that the bright transient is a close pair of point sources separated by $\sim 0.07^{\prime\prime}$, and a 30 times fainter counterimage opposite the lens, for which NIRSpec reveals strong H$\alpha$ emission also at $z=1.371$. The light curves and spectra are consistent with the Type II supernova source being magnified $\gtrsim 100$ times, with $\sim 250$ required to reconcile its luminosity with that of nearby events such as SN 2023ixf. Lens models are consistent with such high magnifications, and always show that the faint image arrived first (undetected in earlier ZTF imaging), consistent with the later spectral phase of this fainter image. A fourth image is also predicted and possibly detected in the NIRSpec data. Light-curve-based time-delay measurements are not possible due to the first image being the faintest; however, the resolved NIRSpec spectra offer a future opportunity for time-delay cosmography through supernova phase measurements.

astro-ph.CO↗

arXiv2026

Early results in the search for extreme coronal line emitters with the Dark Energy Spectroscopic Instrument

Here we present the results of our search through the Early Data Release (EDR) of the Dark Energy Spectroscopic Instrument (DESI) for extreme coronal line emitters (ECLEs) - a rare classification of galaxies displaying strong, high-ionization iron coronal emission lines within their spectra. With the requirement of a strong X-ray continuum to generate the coronal emission, ECLEs have been linked to both active galactic nuclei (AGNs) and tidal disruption events (TDEs). We focus our search on identifying TDE-linked ECLEs. We identify three such objects within the EDR sample, highlighting DESI's effectiveness for discovering new nuclear transients, and determine a galaxy-normalized TDE-linked ECLE rate of $R_\mathrm{G}=5~^{+5}_{-3}\times10^{-6}~\mathrm{galaxy}^{-1}~\mathrm{yr}^{-1}$ at a median redshift of z = 0.2 - broadly consistent with previous works. Additionally, we also identify more than 200 AGNs displaying coronal emission lines, which serve as the primary astrophysical contaminants in searches for TDE-related events. We also include an outline of the custom python code developed for this search.

astro-ph.HE↗

arXiv2026

The DESI Transients Survey: Legacy Classifications and Methodology

We present the first systematic spectroscopic observations of extragalactic transients from the Dark Energy Spectroscopic Instrument (DESI), as part of the DESI Transients Survey program. With 5,000 fibers and an ${\sim} 8$ deg$^2$ field of view, we exploit DESI as a machine for the discovery and classification of transients. We present transient classifications from archival DESI data in Data Releases 1 and 2, relying on a combination of a secondary target program and serendipitous observations. We also present observations from the first 6 months of the DESI spare fiber program dedicated to transients. The program is run in coordination with a dedicated DECam time-domain survey, serving as a pathfinder for what we will be able to achieve in conjunction with the Rubin Observatory Legacy Survey of Space and Time (LSST). We classify over 250 transients, of which the majority were previously unclassified. The sample comprises thermonuclear and core-collapse supernovae and tidal disruption events (TDEs), including a TDE observed before its discovery in imaging. We demonstrate DESI's ability to classify a population of faint transients down to $r\sim 22.5$ mag during main survey operations, with negligible impacts on DESI's main observations.

astro-ph.HE↗

arXiv2025

The Power of DESI for Photometric Redshift Calibration: A Case Study with KiDS-1000

Accurate redshift estimates are a critical requirement for weak lensing surveys and one of the main uncertainties in constraints on dark energy and large-scale cosmic structure. In this paper, we study the potential to calibrate photometric redshift (photo-z) distributions for gravitational lensing using the Dark Energy Spectroscopic Instrument (DESI). Since beginning its science operations in 2021, DESI has collected more than 50 million redshifts, adding about one million monthly. In addition to its large-scale structure samples, DESI has also acquired over 256k high-quality spectroscopic redshifts (spec-zs) in the COSMOS and XMM and VVDS fields. This is already a factor of 3 larger than previous spec-z calibration compilations in these two regions. Here, we explore calibrating photo-zs for the subset of KiDS-1000 galaxies that fall into joint self-organizing map (SOM) cells overlapping the DESI COSMOS footprint using the DESI COSMOS observations. Estimating the redshift distribution in KiDS-1000 with the new DESI data, we find broad consistency with previously published results while also detecting differences in the mean redshift in some tomographic bins with an average shifts of Delta Mean(z) = -0.028 in the mean and Delta Median(z) = +0.011 in the median across tomographic bins. However, we also find that incompleteness per SOM cell, i.e., groups of galaxies with similar colors and magnitudes, can modify n(z) distributions. Finally, we comment on the fact that larger photometric catalogs, aligned with the DESI COSMOS and DESI XMM and VVDS footprints, would be needed to fully exploit the DESI dataset and would extend the coverage to nearly eight times the area of existing 9-band photometry.

astro-ph.CO↗

arXiv2025

The Binary Fraction of Stars in the Dwarf Galaxy Ursa Minor via Dark Energy Spectroscopic Instrument

We utilize multi-epoch line-of-sight velocity measurements from the Milky Way Survey of the Dark Energy Spectroscopic Instrument to estimate the binary fraction for member stars in the dwarf spheroidal galaxy Ursa Minor. Our dataset comprises 670 distinct member stars, with a total of more than 2,000 observations collected over approximately one year. We constrain the binary fraction for UMi to be $0.61^{+0.16}_{-0.20}$ and $0.69^{+0.19}_{-0.17}$, with the binary orbital parameter distributions based on solar neighborhood observation from Duquennoy & Mayor (1991) and Moe & Di Stefano (2017), respectively. Furthermore, by dividing our data into two subsamples at the median metallicity, we identify that the binary fraction for the metal-rich ([Fe/H]>-2.14) population is slightly higher than that of the metal-poor ([Fe/H]<-2.14) population. Based on the Moe & Di Stefano model, the best-constrained binary fractions for metal-rich and metal-poor populations in UMi are $0.86^{+0.14}_{-0.24}$ and $0.48^{+0.26}_{-0.19}$, respectively. After a thorough examination, we find that this offset cannot be attributed to sample selection effects. We also divide our data into two subsamples according to their projected radius to the center of UMi, and find that the more centrally concentrated population in a denser environment has a lower binary fraction of $0.33^{+0.30}_{-0.20}$, compared with $1.00^{+0.00}_{-0.32}$ for the subsample in more outskirts.

astro-ph.SR↗

arXiv2025

A Unified Photometric Redshift Calibration for Weak Lensing Surveys using the Dark Energy Spectroscopic Instrument

The effective redshift distribution $n(z)$ of galaxies is a critical component in the study of weak gravitational lensing. Here, we introduce a new method for determining $n(z)$ for weak lensing surveys based on high-quality redshifts and neural network-based importance weights. Additionally, we present the first unified photometric redshift calibration of the three leading stage-III weak lensing surveys, the Dark Energy Survey (DES), the Hyper Suprime-Cam (HSC) survey and the Kilo-Degree Survey (KiDS), with state-of-the-art spectroscopic data from the Dark Energy Spectroscopic Instrument (DESI). We verify our method using a new, data-driven approach and obtain $n(z)$ constraints with statistical uncertainties of order $\sigma_{\bar z} \sim 0.01$ and smaller. Our analysis is largely independent of previous photometric redshift calibrations and, thus, provides an important cross-check in light of recent cosmological tensions. Overall, we find excellent agreement with previously published results on the DES Y3 and HSC Y1 data sets while there are some differences on the mean redshift with respect to the previously published KiDS-1000 results. We attribute the latter to mismatches in photometric noise properties in the COSMOS field compared to the wider KiDS SOM-gold catalog. At the same time, the new $n(z)$ estimates for KiDS do not significantly change estimates of cosmic structure growth from cosmic shear. Finally, we discuss how our method can be applied to future weak lensing calibrations with DESI data.

astro-ph.CO↗

arXiv2025

Enhancing Multiplet Alignment Measurements with Imaging

We demonstrate that measurements of the gravitational tidal field made with spectroscopic redshifts can be improved with information from imaging surveys. The average orientation of small groups of galaxies, or "multiplets" is correlated with large-scale structure and is used to measure the direction of tidal forces. Previously, multiplet intrinsic alignment has been measured in DESI using galaxies that have spectroscopic redshifts. The DESI Legacy Imaging catalog can be used to supplement multiplet catalogs. Our findings show that galaxy positions from the imaging catalog produce a measurement similar to the measurements made with only spectroscopic data. This demonstrates that imaging can improve our signal-to-noise ratio for multiplet alignment in DESI.

astro-ph.CO↗

arXiv2025

Robust Sensor Placement for Poisson Arrivals with False Alarm Aware Spatiotemporal Sensing

This paper studies sensor placement when detection performance varies stochastically due to environmental factors over space and time and false alarms are present, but a filter is used to attenuate the effect. We introduce a unified model that couples detection and false alarms through an availability function, which captures how false alarms reduce effective sensing and filtering responses to the disturbance. Building on this model, we give a sufficient condition under which filtering improves detection. In addition, we derive a coverage-based lower bound on the void probability. Furthermore, we prove robustness guarantees showing that performance remains stable when detection probabilities are learned from limited data. We validate the approach with numerical studies using AIS vessel-traffic data and synthetic maritime scenarios. Together, these results provide theory and practical guidance for deploying sensors in dynamic, uncertain environments.

eess.SY↗

arXiv2025

Outlier Detection of Poisson-Distributed Targets Using a Seabed Sensor Network

This paper presents a framework for classifying and detecting spatial commission outliers in maritime environments using seabed acoustic sensor networks and log Gaussian Cox processes (LGCPs). By modeling target arrivals as a mixture of normal and outlier processes, we estimate the probability that a newly observed event is an outlier. We propose a second-order approximation of this probability that incorporates both the mean and variance of the normal intensity function, providing improved classification accuracy compared to mean-only approaches. We analytically show that our method yields a tighter bound to the true probability using Jensen's inequality. To enhance detection, we integrate a real-time, near-optimal sensor placement strategy that dynamically adjusts sensor locations based on the evolving outlier intensity. The proposed framework is validated using real ship traffic data near Norfolk, Virginia, where numerical results demonstrate the effectiveness of our approach in improving both classification performance and outlier detection through sensor deployment.

cs.LG↗

arXiv2025

Improved Approximation of Sensor Network Performance for Seabed Acoustic Sensors

Sensor locations to detect Poisson-distributed targets, such as seabed sensors that detect shipping traffic, can be selected to maximize the so-called void probability, which is the probability of detecting all targets. Because evaluation of void probability is computationally expensive, we propose a new approximation of void probability that can greatly reduce the computational cost of selecting locations for a network of sensors. We build upon prior work that approximates void probability using Jensen's inequality. Our new approach better accommodates uncertainty in the (Poisson) target model and yields a sharper error bound. The proposed method is evaluated using historical ship traffic data from the Hampton Roads Channel, Virginia, demonstrating a reduction in the approximation error compared to the previous approach. The results validate the effectiveness of the improved approximation for maritime surveillance applications.

cs.RO↗

arXiv2025

Near-optimal Sensor Placement for Detecting Stochastic Target Trajectories in Barrier Coverage Systems

This paper addresses the deployment of sensors for a 2-D barrier coverage system. The challenge is to compute near-optimal sensor placements for detecting targets whose trajectories follow a log-Gaussian Cox line process. We explore sensor deployment in a transformed space, where linear target trajectories are represented as points. While this space simplifies handling the line process, the spatial functions representing sensor performance (i.e. probability of detection) become less intuitive. To illustrate our approach, we focus on positioning sensors of the barrier coverage system on the seafloor to detect passing ships. Through numerical experiments using historical ship data, we compute sensor locations that maximize the probability all ship passing over the barrier coverage system are detected.

cs.RO↗

arXiv2023

Toward optimal placement of spatial sensors

This paper addresses the challenges of optimally placing a finite number of sensors to detect Poisson-distributed targets in a bounded domain. We seek to rigorously account for uncertainty in the target arrival model throughout the problem. Sensor locations are selected to maximize the probability that no targets are missed. While this objective function is well-suited to applications where failure to detect targets is highly undesirable, it does not lead to a computationally efficient optimization problem. We propose an approximation of the objective function that is non-negative, submodular, and monotone and for which greedy selection of sensor locations works well. We also characterize the gap between the desired objective function and our approximation. For numerical illustrations, we consider the case of the detection of ship traffic using sensors mounted on the seafloor.

cs.RO↗

arXiv2023

The Optical Corrector for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40\,million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4-meter Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3.2-degree diameter prime focus corrector that focuses astronomical light onto a 0.8-meter diameter focal surface with excellent image quality over the DESI bandpass of 360-980nm. The wide-field corrector includes six lenses, as large as 1.1-meters in diameter and as heavy as 237\,kilograms, including two counter-rotating wedged lenses that correct for atmospheric dispersion over Zenith angles from 0 to 60 degrees. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and list some lessons learned during the multi-year fabrication phase.

astro-ph.IM↗

arXiv2022

The Robotic Multi-Object Focal Plane System of the Dark Energy Spectroscopic Instrument (DESI)

A system of 5,020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically re-target their optical fibers every 10 - 20 minutes, each to a precision of several microns, with a reconfiguration time less than 2 minutes. Over the next five years, they will enable the newly-constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5,020 robotic positioners and optical fibers, DESI's Focal Plane System includes 6 guide cameras, 4 wavefront cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multi-object, fiber-fed spectrographs.

astro-ph.IM↗

arXiv2019

The Physics of the Accelerating Universe Camera

The PAU (Physics of the Accelerating Universe) Survey goal is to obtain photometric redshifts (photo-z) and Spectral Energy Distribution (SED) of astronomical objects with a resolution roughly one order of magnitude better than current broad band photometric surveys. To accomplish this, a new large field of view camera (PAUCam) has been designed, built, commissioned and is now operated at the William Herschel Telescope (WHT). With the current WHT Prime Focus corrector, the camera covers ~1-degree diameter Field of View (FoV), of which, only the inner ~40 arcmin diameter are unvignetted. The focal plane consists of a mosaic of 18 2k$x4k Hamamatsu fully depleted CCDs, with high quantum efficiency up to 1 micrometers in wavelength. To maximize the detector coverage within the FoV, filters are placed in front of the CCDs inside the camera cryostat (made out of carbon fiber) using a challenging movable tray system. The camera uses a set of 40 narrow band filters ranging from ~4500 to ~8500 Angstroms complemented with six standard broad-band filters, ugrizY. The PAU Survey aims to cover roughly 100 square degrees over fields with existing deep photometry and galaxy shapes to obtain accurate photometric redshifts for galaxies down to i_AB~22.5, detecting also galaxies down to i_AB~24 with less precision in redshift. With this data set we will be able to measure intrinsic alignments, galaxy clustering and perform galaxy evolution studies in a new range of densities and redshifts. Here, we describe the PAU camera, its first commissioning results and performance.

astro-ph.IM↗

arXiv2018

ProtoDESI: First On-Sky Technology Demonstration for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the baryon acoustic oscillations technique. The spectra of 35 million galaxies and quasars over 14,000 square degrees will be measured during a 5-year survey. A new prime focus corrector for the Mayall telescope at Kitt Peak National Observatory will deliver light to 5,000 individually targeted fiber-fed robotic positioners. The fibers in turn feed ten broadband multi-object spectrographs. We describe the ProtoDESI experiment, that was installed and commissioned on the 4-m Mayall telescope from August 14 to September 30, 2016. ProtoDESI was an on-sky technology demonstration with the goal to reduce technical risks associated with aligning optical fibers with targets using robotic fiber positioners and maintaining the stability required to operate DESI. The ProtoDESI prime focus instrument, consisting of three fiber positioners, illuminated fiducials, and a guide camera, was installed behind the existing Mosaic corrector on the Mayall telescope. A Fiber View Camera was mounted in the Cassegrain cage of the telescope and provided feedback metrology for positioning the fibers. ProtoDESI also provided a platform for early integration of hardware with the DESI Instrument Control System that controls the subsystems, provides communication with the Telescope Control System, and collects instrument telemetry data. Lacking a spectrograph, ProtoDESI monitored the output of the fibers using a Fiber Photometry Camera mounted on the prime focus instrument. ProtoDESI was successful in acquiring targets with the robotically positioned fibers and demonstrated that the DESI guiding requirements can be met.

astro-ph.IM↗