Searcharxiv⌕ Search

arXiv subjects

Jose Antonio Moreno

Publications and source records attributed to Jose Antonio Moreno.

7 recordsLinked to original sources

Bridging atomic and mesoscopic length scales with Replica Scanning Tunneling Microscopy: Visualizing the atomic lattice of UTe$_2$ and the atomic scale superconducting gap modulations of FeSe close to micron length scales

Scanning Tunneling Microscopy is a cornerstone technique for visualizing the electronic density of states with atomic resolution (typically below 0.1 nm). While the field of view of most STM setups extends up to a few microns, obtaining atomic resolution over these large areas is often impractical and excessively time-consuming. This is due to the need to acquire maps with a point number reaching $10^7$ or more with a full current or conductance vs voltage curve at each point. The standard procedure is to make large scale maps and then select small regions to zoom-in for high-resolution atomic scale analysis. However, this approach fails to address a question which is often critical: Does a specific atomic-scale modulation of the electronic density of states persist over much larger, mesoscopic length scales? Here we present a new method: Replica STM (R-STM), that overcomes this limitation, allowing the study of atomic-scale phenomena up to micron length scales. We obtained new large-area STM tunneling conductance maps in UTe$_2$ and FeSe, spanning areas over 200 nm in size. In these large scale maps we discovered periodic signals with wavelengths significantly exceeding interatomic distances. We show that these large-wavelength periodic signals are replicas of the underlying atomic-scale density of states modulations. R-STM leverages these replica signals to efficiently track atomic-scale features over large areas. We discuss the influence of phase slips, disorder and defects in the replicas. Our results suggest that atomic scale modulations of the superconducting density of states could persist over large length scales in FeSe. R-STM provides a new capability for STM to compare atomic scale with micrometer scale phenomena. The proof of principle of R-STM can be extended to any other scanning probe microscopy experiment where a periodic signal is traced as a function of position.

cond-mat.supr-con↗

Robust two-dimensional surface superconductivity and vortex lattice in the Weyl semimetal $γ$-PtBi$_2$

The layered compound $γ$-PtBi$_2$ is a topological semimetal with Fermi arcs at the surface joining bulk Weyl points. Recent work has found signatures of surface superconductivity consisting of gap openings compatible with a critical temperature orders of magnitude larger than the bulk value. However, no superconducting vortices have been identified, raising questions about the robustness of the phase coherence. Here we use very low temperature Scanning Tunneling Microscopy (STM) and find robust superconductivity with T$_C=$2.9 K and H$_{C2}\approx$1.8 T linked to the Fermi arcs. We observe quantized superconducting vortices and the Josephson effect, demonstrating two-dimensional macroscopic quantum phase coherence.

cond-mat.supr-con↗

Scanning tunneling spectroscopy of superconducting nitridized aluminum thin films

Nitride-based superconductors represent a family of superconducting thin film materials displaying higher quality than their corresponding bare superconductor when used in devices for applications such as cosmic radiation sensing. In recent times, Niobium-based and Titanium-based nitrides were used to improve the quality of superconducting devices in quantum technology applications. Recently, nitridized Aluminum (NitrAl) has been found to display higher critical temperatures and enhanced resilience to magnetic fields compared to those of Al, making it a new interesting candidate for superconducting quantum circuit applications. However, the microscopic properties of NitrAl remain highly unexplored. Here we use Scanning Tunneling Microscope (STM) to measure the superconducting density of states of a thin film sample of nitridized-Aluminum (NitrAl), with a room temperature resistivity between pure Al and fully insulating aluminum nitride. We show that the in-gap density of states is zero up to about $\hbarω=250~\mathrm{μeV}$ and that there is a distribution of values of the superconducting gap around $Δ_0=360~\mathrm{μeV}$, close to the BCS expectation $Δ=1.76 k_{\mathrm{B}}T_{\mathrm{c}}$. We also find varying superconducting gap values at the nanometer scale, by approximately 10\%, when probing different regions of the sample. These results suggest a gap which is larger than the one of pure Al, and is spatially more homogeneous than the superconducting gap values often found in thin films. Our work demonstrates that STM is as a powerful tool to screen materials for quantum devices through the measurement of the spatial dependence of the superconducting density of states.

cond-mat.supr-con↗

Gapless superconductivity from extremely dilute magnetic disorder in 2H-NbSe2-xSx

Most superconducting materials exhibit a vanishing density of states at the Fermi level and Anderson's theorem posits that the superconducting gap is robust against nonmagnetic disorder. Although dilute magnetic impurities lead to localized in-gap states, these states typically have no bearing on the material's bulk superconducting properties. However, numerous experiments reveal a finite density of states at the Fermi level in systems with an apparently negligible number of magnetic impurities. Here, using scanning tunneling microscopy and self-consistent Bogoliubov-de Gennes calculations, we find that gapless superconductivity emerges in 2H-NbSe2-xSx at remarkably low magnetic impurity concentrations. Furthermore, our density functional theory calculations and in-gap quasiparticle interference measurements demonstrate that the Se-S substitution significantly modifies the band structure. This modification favours nesting and dictates the in-gap scattering for x>0, in stark contrast to the dominant charge density wave interactions in pure 2H-NbSe2. Our findings reveal an unusual superconducting response to disorder and highlight the importance of incorporating material-specific band structures in the understanding of a superconductor's response to even very low concentrations of magnetic impurities.

cond-mat.supr-con↗

Superconducting density of states of PtPb4

PtPb$_4$ is a type II superconductor with a bulk critical temperature $T_{c}\approx 3 $K and an upper critical field of $H_{c2}=0.36 $T. PtPb$_4$ is related to non-superconducting PtSn$_4$, which presents nodal arc states at the surface. Here we measure the superconducting density of states of PtPb$_4$ using millikelvin Scanning Tunneling Microscopy (STM). We observe a fully opened superconducting gap of $Δ=0.48$\ meV similar to expectations from Bardeen Cooper and Schrieffer (BCS) theory ($Δ_0=1.76k_BT_{c}=0.49 $meV). Measurements under magnetic fields applied perpendicular to the surface show a spatially inhomogeneous gap structure, presenting superconducting signatures at fields as high as 1.5 T, significantly above $H_{c2}=0.36 $T. On some locations we find that the superconducting density of states does not vanish above $T_{c}$. We can find signatures of a superconducting gap up to 5K. We discuss possible reasons for the observation of superconducting properties above $T_{c}$ and $H_{c2}$, emphasizing the role played by structural defects.

cond-mat.supr-con↗

The feedback driven atomic scale Josephson microscope

The ultimate spatial limit to establish a Josephson coupling between two superconducting electrodes is an atomic-scale junction. The Josephson effect in such ultrasmall junctions has been used to unveil new switching dynamics, study coupling close to superconducting bound states or reveal non-reciprocal effects. However, the Josephson coupling is weak and the sensitivity to temperature reduces the Cooper pair current magnitude. Here we show that a feedback element induces a time-dependent bistable regime which consists of spontaneous periodic oscillations between two different Cooper pair tunneling states (corresponding to the DC and AC Josephson regimes respectively). The amplitude of the time-averaged current within the bistable regime is almost independent of temperature. By tracing the periodic oscillations in the new bistable regime as a function of the position in a Scanning Tunneling Microscope, we obtain atomic scale maps of the critical current in 2H-NbSe$_2$ and find spatial modulations due to a pair density wave. Our results fundamentally improve our understanding of atomic size Josephson junctions including a feedback element in the circuit and provide a promising new route to study superconducting materials through atomic scale maps of the Josephson coupling.

cond-mat.supr-con↗

Anomalous size dependence of the coercivity of nanopatterned CrGeTe3

The coercivity of single-domain magnetic nanoparticles typically decreases with the nanoparticle size and reaches zero when thermal fluctuations overcome the magnetic anisotropy. Here, we used SQUID-on-tip microscopy to investigate the coercivity of square-shaped CrGeTe3 nanoislands with a wide range of sizes and width-to-thickness aspect ratios. The results reveal an anomalous size-dependent coercivity, with smaller islands exhibiting higher coercivity. The nonconventional scaling of the coercivity in CrGeTe3 nanoislands was found to be inversely proportional to the island width and thickness (1 over wd). This scaling implies that the nanoisland magnetic anisotropy is proportional to the perimeter rather than the volume, suggesting a magnetic edge state. In addition, we observe that 1600 nm wide islands display multi-domain structures with zero net remnant field, corresponding to the magnetic properties of pristine CrGeTe3 flakes. Our findings highlight the significant influence of edge states on the magnetic properties of CrGeTe3 and deepen our understanding of low-dimensional magnetic systems.

cond-mat.mtrl-sci↗