arXiv subjects

Jose Avila

Publications and source records attributed to Jose Avila.

28 records · Page 2Linked to original sources

arXiv2017

Temperature-Driven Topological Transition in 1T'-MoTe2

The topology of Weyl semimetals requires the existence of unique surface states. Surface states have been visualized in spectroscopy measurements, but their connection to the topological character of the material remains largely unexplored. 1T'-MoTe2, presents a unique opportunity to study this connection. This material undergoes a phase transition at 240K that changes the structure from orthorhombic (putative Weyl semimetal) to monoclinic (trivial metal), while largely maintaining its bulk electronic structure. Here we show from temperature-dependent quasiparticle interference measurements that this structural transition also acts as a topological switch for surface states in 1T'-MoTe2. At low temperature, we observe strong quasiparticle scattering, consistent with theoretical predictions and photoemission measurements for the surface states in this material. In contrast, measurements performed at room temperature show the complete absence of the scattering wavevectors associated with the trivial surface states. These distinct quasiparticle scattering behaviors show that 1T'-MoTe2 is ideal for separating topological and trivial electronic phenomena via temperature dependent measurements.

cond-mat.mtrl-sci↗

arXiv2017

Emergence of Frohlich polaron from interlayer electron-phonon coupling in van der Waals heterostructure

Van der Waals heterostructures, vertical stacks of layered materials, offer newopportunities for novel quantum phenomena which are absent in their constituent components. Here we report the emergence of polaron quasiparticles at the interface of graphene/hexagonal boron nitride (h-BN) heterostructures. Using nanospot angle-resolved photoemission spectroscopy, we observe zone-corner replicas of h-BN valence band maxima, with energy spacing coincident with the highest phonon energy of the heterostructure|an indication of Frohlich polaron formation due to forward scattering electron-phonon coupling. Parabolic fitting of the h-BN bands yields an effective mass enhancement of ~ 2.3, suggesting an intermediate coupling strength. Our theoretical simulations based on Migdal-Eliashberg theory corroborate the experimental results, allowing the extraction of microscopic physical parameters. Moreover,renormalisation of graphene $π$ band is observed due to the hybridisation with the h-BN band. Our work generalises the polaron study from transition metal oxides to Van derWaals heterostructures with higher material exibility, highlighting interlayer coupling as an extra degree of freedom to explore emergent phenomena.

cond-mat.mes-hall↗

arXiv2017

Electronic bandstructure of ReS2 by high resolution angle resolved photoemission spectroscopy

The rhenium-based transition metal dichalcogenides (TMDs) are atypical of the TMD family due to their highly anisotropic crystalline structure and are recognized as promising materials for two dimensional heterostructure devices. The nature of the band gap (direct or indirect) for bulk, few and single layer forms of ReS$_2$ is of particular interest, due to its comparatively weak inter-planar interaction. However, the degree of inter-layer interaction and the question of whether a transition from indirect to direct gap is observed on reducing thickness (as in other TMDs) are controversial. We present a direct determination of the valence band structure of bulk ReS$_2$ using high resolution angle resolved photoemission spectroscopy (ARPES). We find a clear in-plane anisotropy due to the presence of chains of Re atoms, with a strongly directional effective mass which is larger in the direction orthogonal to the Re chains (2.2 $m_e$) than along them (1.6 $m_e$), in good agreement with density functional theory calculations. An appreciable inter-plane interaction results in an experimentally-measured difference of ~100-200 meV between the valence band maxima at the Z point (0,0,1/2) and the $Γ$ point (0,0,0) of the three-dimensional Brillouin zone. This leads to a direct gap at Z and a close-lying but larger gap at $Γ$, implying that bulk ReS2 is marginally indirect. This may account for recent conflicting transport and photoluminescence measurements and the resulting uncertainty about the direct or indirect gap nature of this material.

cond-mat.mtrl-sci↗

arXiv2017

Angle resolved photoemission spectroscopy reveals spin charge separation in metallic MoSe2 grain boundary

Material line defects are one-dimensional structures but the search and proof of electron behaviour consistent with the reduced dimension of such defects has been so far unsuccessful. Here we show using angle resolved photoemission spectroscopy that twin-grain boundaries in the layered semiconductor MoSe2 exhibit parabolic metallic bands. The one-dimensional nature is evident from a charge density wave transition, whose periodicity is given by kF/π, consistent with scanning tunneling microscopy and angle resolved photoemission measurements. Most importantly, we provide evidence for spin- and charge-separation, the hallmark of one-dimensional quantum liquids. Our studies show that the spectral line splits into distinctive spinon and holon excitations whose dispersions exactly follow the energy-momentum dependence calculated by a Hubbard model with suitable finite-range interactions. Our results also imply that quantum wires and junctions can be isolated in line defects of other transition metal dichalcogenides, which may enable quantum transport measurements and devices.

cond-mat.str-el↗

arXiv2017

Electronic structure of transferred graphene/h-BN van der Waals heterostructures with nonzero stacking angles by nano-ARPES

In van der Waals heterostructures, the periodic potential from the Moiré superlattice can be used as a control knob to modulate the electronic structure of the constituent materials. Here we present a nanoscale angle-resolved photoemission spectroscopy (Nano-ARPES) study of transferred graphene/h-BN heterostructures with two different stacking angles of 2.4° and 4.3° respectively. Our measurements reveal six replicas of graphene Dirac cones at the superlattice Brillouin zone (SBZ) centers. The size of the SBZ and its relative rotation angle to the graphene BZ are in good agreement with Moiré superlattice period extracted from atomic force microscopy (AFM) measurements. Comparison to epitaxial graphene/h-BN with 0° stacking angles suggests that the interaction between graphene and h-BN decreases with increasing stacking angle.

cond-mat.mtrl-sci↗

arXiv2015

Experimental Observation of Two Massless Dirac-Fermion Gases in Graphene-Topological Insulator Heterostructure

Graphene and topological insulators (TI) possess two-dimensional Dirac fermions with distinct physical properties. Integrating these two Dirac materials in a single device creates interesting opportunities for exploring new physics of interacting massless Dirac fermions. Here we report on a practical route to experimental fabrication of graphene-Sb2Te3 heterostructure. The graphene-TI heterostructures are prepared by using a dry transfer of chemical-vapor-deposition grown graphene film. ARPES measurements confirm the coexistence of topological surface states of Sb2Te3 and Dirac π bands of graphene, and identify the twist angle in the graphene-TI heterostructure. The results suggest a potential tunable electronic platform in which two different Dirac low-energy states dominate the transport behavior.

cond-mat.mes-hall↗

arXiv2014

The atomic structure of the $\sqrt{3} \times \sqrt{3}$ phase of silicene on Ag(111)

The growth of the $\sqrt{3} \times \sqrt{3}$ reconstructed silicene on Ag substrate has been frequently observed in experiments while its atomic structure and formation mechanism is poorly understood. Here by first-principles calculations we show that $\sqrt{3} \times \sqrt{3}$ reconstructed silicene is constituted by dumbbell units of Si atoms arranged in a honeycomb pattern. Our model shows excellent agreement with the experimentally reported lattice constant and STM image. We propose a new mechanism for explaining the spontaneous and consequential formation of $\sqrt{3} \times \sqrt{3}$ structures from $3 \times 3$ structures on Ag substrate. We show that the $\sqrt{3} \times \sqrt{3}$ reconstruction is mainly determined by the interaction between Si atoms and have weak influence from Ag substrate. The proposed mechanism opens the path to understanding of multilayer silicon.

cond-mat.mes-hall↗

arXiv2013

Graphene Grown on Ge(001) from Atomic Source

Among the many anticipated applications of graphene, some - such as transistors for Si microelectronics - would greatly benefit from the possibility to deposit graphene directly on a semiconductor grown on a Si wafer. We report that Ge(001) layers on Si(001) wafers can be uniformly covered with graphene at temperatures between 800°C and the melting temperature of Ge. The graphene is closed, with sheet resistivity strongly decreasing with growth temperature, weakly decreasing with the amount of deposited C, and reaching down to 2 kOhm/sq. Activation energy of surface roughness is low (about 0.66 eV) and constant throughout the range of temperatures in which graphene is formed. Density functional theory calculations indicate that the major physical processes affecting the growth are: (1) substitution of Ge in surface dimers by C, (2) interaction between C clusters and Ge monomers, and (3) formation of chemical bonds between graphene edge and Ge(001), and that the processes 1 and 2 are surpassed by CH$_{2}$ surface diffusion when the C atoms are delivered from CH$_{4}$. The results of this study indicate that graphene can be produced directly at the active region of the transistor in a process compatible with the Si technology.

cond-mat.mes-hall↗

arXiv2012

ANTARES, a scanning photoemission microscopy beamline at SOLEIL

As one of the latest beamline built at the SOLEIL synchrotron source, ANTARES beamline offers a spectroscopic non-destructive nano-probe to study advanced materials. This innovative scanning photoemission microscopy combines linear and angle sweeps to perform precise electronic band structure determination by Nano Angle Resolved Photoelectron Spectroscopy (nanoARPES) and chemical imaging by core level detection. The beamline integrates effectively insertion devices and a high transmission beamline optics. This photon source has been combined with an advanced microscope, which has precise sample handling abilities. Moreover, it is fully compatible with a high resolution R4000 Scienta hemispherical analyzer and a set of Fresnel Zone Plates (FZP) able to focalize the beam spot up to a few tenths of nanometers, depending on the spatial resolution of the selected FZP. We present here the main conceptual design of the beamline and endstation, together with some of the firsts commissioning results.

physics.ins-det↗

arXiv2012

A chemical imaging and Nano-ARPES study of well-ordered thermally reduced SrTiO3(100)

The structural and electronic properties of thermally reduced SrTiO3(100) single crystals have been investigated using a probe with real- and reciprocal-space sensitivity: a synchrotron radiation microsopic setup which offers the possibility of Scanning Photoemission Microscopy and Angle Resolved Photoelectron Spectroscopy (ARPES) down to the nanometric scale. We have spectroscopically imaged the chemical composition of samples which present reproducible and suitable low-energy electron diffraction patterns after following well-established thermal reduction protocols. At the micrometric scale, Ca-rich areas have been directly imaged using high-energy resolution core level photoemission. Moreover, we have monitored the effect of Ca segregation on different features of the SrTiO3(100) electronic band structure, measuring ARPES inside, outside and at the interface of surface inhomogeneities with the identified Ca-rich areas. In particular, the interaction of Ca with the well-known intragap localized state, previously attributed to oxygen vacancies, has been investigated. Moreover, the combination of direct imaging and spectroscopic techniques with high spatial resolution has clarified the long-standing dilemma related to the bulk or surface character of Ca segregation in SrTiO3. Our results present solid evidence that the penetration depth of Ca segregation is very small. In contrast to what has been previously proposed, the origin of long-range surface reconstructions can unlikely be associated to Ca due to strong local variations of its surface concentration.

cond-mat.mtrl-sci↗