arXiv subjects

Josef Eder

Publications and source records attributed to Josef Eder.

3 recordsLinked to original sources

arXiv2026

EON-SII: Design of a transportable picosecond stellar intensity interferometer for compact-star astrophysics

Stellar intensity interferometry (SII) measures correlations in photon-arrival fluctuations recorded by telescopes observing bright celestial sources. It can resolve angular scales far smaller than those accessible to a single optical telescope and is largely insensitive to atmospheric turbulence. After the first demonstration of SII on Sirius in 1956, Hanbury Brown and Twiss used the technique to measure the diameters of 32 stars. More recently, VERITAS, MAGIC, H.E.S.S., and CTAO's LST-1 have revived the method, although observations remain restricted to bright targets because of their optical design, optimized for gamma-ray astrophysics, rather than SII. We present EON-SII, the design and performance of a two-telescope intensity interferometer intended to extend the SII technique to compact targets at magnitudes of about V=8.5 up to V=10.7. Each transportable telescope has a 4-m diameter mirror, approximately 9m2 collecting area, an actively aligned 18-panel primary mirror, and Cassegrain optics specified to concentrate at least 90% of the light within 3 arcsec. A fibre-free spectrograph covers 400-550 nm at R~7000-8000 and is designed to provide of order 1000 statistically independent spectral channels.

astro-ph.IM↗

arXiv2026

Adapting the 23m LST-North mechanical structure design for the strong Chile seismic environment

The 23-meter-diameter Large-Sized Telescope (LST) is the largest size telescope of the next generation Cherenkov Telescope Array (CTA). The first telescope, LST-1, was installed at the Roque de los Muchachos Observatory (ORM) on La Palma at an altitude of 2,250 m in 2018 and has been in operation since 2019. Its ultra-lightweight structure (110 tons) enables extremely rapid repositioning (180{\deg} in 18 seconds) and has been designed to withstand extreme environmental conditions, including storms and winds exceeding speed up to 200 km/h. To deploy the same solid telescope design at the CTA Southern Observatory in Chile, the structure must be adapted to the significantly higher seismic demands of the site. To address this challenge, the Max Planck Institute for Physics (MPP) has proposed the integration of a seismic isolation system with the proven LST-1 structural design. This approach substantially reduces seismic loads and dynamic amplification, thereby avoiding extensive structural modifications and enabling the existing telescope design to be transferred to the Chilean site with only minor adaptations. In this contribution, we present the proposed seismic isolation concept and its feasibility studies. MPP is responsible for the mechanical structure of the LST and has validated the concept through detailed finite-element analyses and long-term structural lifetime assessments.

astro-ph.IM↗

arXiv2017

The Wide Field Imager Instrument for Athena

The WFI (Wide Field Imager) instrument is planned to be one of two complementary focal plane cameras on ESA's next X-ray observatory Athena. It combines unprecedented survey power through its large field of view of 40 amin x 40 amin together with excellent count rate capability (larger than 1 Crab). The energy resolution of the silicon sensor is state-of-the-art in the energy band of interest from 0.2 keV to 15 keV, e.g. the full width at half maximum of a line at 7 keV will be better than 170 eV until the end of the nominal mission phase. This performance is accomplished by using DEPFET active pixel sensors with a pixel size of 130 x 130 microns is well suited to the on-axis angular resolution of 5 arcsec half energy width (HEW) of the mirror system. Each DEPFET pixel is a combined sensor-amplifier structure with a MOSFET integrated onto a fully depleted 450 micron thick silicon bulk. Two detectors are planned for the WFI instrument: A large-area detector comprising four sensors with a total of 1024 x 1024 pixels and a fast detector optimized for high count rate observations. This high count rate capable detector permits for bright point sources with an intensity of 1 Crab a throughput of more than 80% and a pile-up of less than 1 %. The fast readout of the DEPFET pixel matrices is facilitated by an ASIC development, called VERITAS-2. Together with the Switcher-A, a control ASIC that allows for operation of the DEPFET in rolling shutter mode, these elements form the key components of the WFI detectors. The detectors are surrounded by a graded-Z shield, which has in particular the purpose to avoid fluorescence lines that would contribute to the instrument background...[Abridged]

astro-ph.IM↗