arXiv subjects

Josep Miquel Jornet

Publications and source records attributed to Josep Miquel Jornet.

18 recordsLinked to original sources

arXiv2026

User Mobility Demands Near-Field Communications in Terahertz Band Wireless Networks Beyond 6G

Near-field propagation is often unavoidable at terahertz (THz) frequencies due to the large apertures needed for sufficient array gain, yet near-field operation complicates practical system design, especially under user mobility. This paper asks whether a mobile THz link can remain broadband, achieve the desired high rates and coverage, while operating exclusively in the radiative far field. To answer this question, we develop a proof-by-contradiction feasibility framework that jointly enforces (i) a far-field requirement based on the Fraunhofer distance and (ii) a reliability requirement specified by a target SNR at the worst-case link distance. We derive closed-form upper bounds on the far-field-feasible bandwidth for stationary and mobile links. We further incorporate practical misalignment through several UE rotation and mobility scenarios. Numerical results show that stationary THz links can remain far-field-only with physically realizable apertures while supporting extremely large bandwidths, whereas practical mobile THz systems cannot. In practically relevant mobile THz access settings, the far-field-feasible bandwidth becomes a severe limiting factor: achieving tens-of-GHz targets would require unrealistically high UE transmit power. A cross-band comparison further shows that far-field-only operation is largely attainable at sub-6~GHz and, to a significant extent, at mmWave for moderate bandwidths, while near-field-aware designs become essential for mobile THz access.

eess.SP↗

arXiv2026

Impact of Pointing Errors and Correlated Wall Blockages on Practical Grid-based Indoor Terahertz Communication Systems

Terahertz (THz) communications has emerged as a promising technology for future wireless systems due to its potential to support extremely high data rates. However, severe path loss, blockage effects, and sensitivity to beam misalignment pose major challenges to reliable indoor THz communications. In this paper, we investigate the coverage probability of downlink transmission in a three-dimensional (3D) indoor THz communication system under structured access point (AP) deployments, with a focus on square and hexagonal grid topologies. A tractable analytical framework is developed to jointly account for human blockages, correlated wall blockages across APs, beam training, and residual pointing error. Numerical results demonstrate that wall blockage correlation significantly reduces the association and coverage probabilities, and its impact cannot be neglected in system performance analysis. Compared with square grid AP deployments, hexagonal grids consistently achieve higher coverage by mitigating correlated wall blockage effects and reducing the distances between user equipments (UEs) and their associated APs. Furthermore, coverage performance is shown to strongly depend on the UE location, with noticeable degradation as the UE moves away from its nearest AP. Residual pointing error is found to introduce substantial coverage loss, especially for longer links. In addition, beam training analysis reveals a non-monotonic relationship between antenna array size and training overhead, highlighting an inherent tradeoff among antenna configuration, beamwidth selection, and beam training efficiency. These findings provide useful insights into the design and deployment of practical indoor THz communication systems.

cs.IT↗

arXiv2026

Impact of Pointing Error on Coverage Performance of 3D Indoor Terahertz Communication Systems

In this paper, we develop a tractable analytical framework for a three-dimensional (3D) indoor terahertz (THz) communication system to theoretically assess the impact of the pointing error on its coverage performance. Specifically, we model the locations of access points (APs) using a Poisson point process, human blockages as random cylinder processes, and wall blockages through a Boolean straight line process. A pointing error refers to beamforming gain and direction mismatch between the transmitter and receiver. We characterize it based on the inaccuracy of location estimate. We then analyze the impact of this pointing error on the received signal power and derive a tractable expression for the coverage probability, incorporating the multi-cluster fluctuating two-ray distribution to accurately model small-scale fading in THz communications. Aided by simulation results, we corroborate our analysis and demonstrate that the pointing error has a pronounced impact on the coverage probability. Specifically, we find that merely increasing the antenna array size is insufficient to improve the coverage probability and mitigate the detrimental impact of the pointing error, highlighting the necessity of advanced estimation techniques in THz communication systems.

eess.SP↗

arXiv2025

Multi-Functional Programmable Metasurfaces for 6G and Beyond

The sixth-generation and beyond (B6G) networks are envisioned to support advanced applications that demand high-speed communication, high-precision sensing, and high-performance computing. To underpin this multi-functional evolution, energy- and cost-efficient programmable metasurfaces (PMs) have emerged as a promising technology for dynamically manipulating electromagnetic waves. This paper provides a comprehensive survey of representative multi-functional PM paradigms, with a specific focus on achieving \emph{full-space communication coverage}, \emph{ubiquitous sensing}, as well as \emph{intelligent signal processing and computing}. i) For simultaneously transmitting and reflecting surfaces (STARS)-enabled full-space communications, we elaborate on their operational protocols and pivotal applications in supporting efficient communications, physical layer security, unmanned aerial vehicle networks, and wireless power transfer. ii) For PM-underpinned ubiquitous sensing, we formulate the signal models for the PM-assisted architecture and systematically characterize its advantages in near-field and cooperative sensing, while transitioning to the PM-enabled transceiver architecture and demonstrating its superior performance in multi-band operations. iii) For advanced signal processing and computing, we explore the novel paradigm of stacked intelligent metasurfaces (SIMs), investigating their implementation in wave-domain analog processing and over-the-air mathematical computing. Finally, we identify key research challenges and envision future directions for multi-functional PMs towards B6G.

eess.SP↗

arXiv2025

Magnetic Localization for In-Body Nano-Communication Medical Systems

Nano-machines circulating inside the human body, collecting data on tissue conditions, represent a vital part of next-generation medical diagnostic systems. However, for these devices to operate effectively, they need to relay not only their medical measurements but also their positions. This paper introduces a novel localization method for in-body nano-machines based on the magnetic field, leveraging the advantageous magnetic permeability of all human tissues. The entire proposed localization system is described, starting from 10 um x 10 um magnetometers to be integrated into the nano-machines, to a set of external wires generating the magnetic field. Mathematical equations for the localization algorithm are also provided, assuming the nano-machines do not execute the computations themselves, but transmit their magnetic field measurements together with medical data outside of the body. The whole system is validated with computer simulations that capture the measurement error of the magnetometers, the error induced by the Earth magnetic field, and a human body model assuming different possible positions of nano-machines. The results show a very high system accuracy with position errors even below 1 cm.

cs.IR↗

arXiv2025

Low Complexity Artificial Noise Aided Beam Focusing Design in Near-Field Terahertz Communications

In this paper, we develop a novel low-complexity artificial noise (AN) aided beam focusing scheme in a near-field terahertz wiretap communication system. In this system, the base station (BS) equipped with a large-scale array transmits signals to a legitimate user, while mitigating information leakage to an eavesdropper. We formulate an optimization problem to maximize the secrecy rate achieved at the legitimate user and solve it by designing the optimal beam focusing and power allocation. Numerical results demonstrate the significant performance improvement achieved by the proposed AN aided beam focusing scheme, especially when the eavesdropper is located closer to the BS than the legitimate user.

cs.IT↗

arXiv2025

Optimization and Characterization of Near-Field Beams with Uniform Linear Arrays

In this paper, we consider near-field beams that can mitigate signal attenuation and blockage effects using a uniform linear array (ULA). In particular, closed-form expressions for phase distributions in a ULA are derived to generate Bessel beams and curving beams based on the desired propagation directions and trajectories. Based on the phase distributions, the maximum steering angle and propagation distance of Bessel beams with a ULA are revealed. In addition, from the sampling theorem in the spatial domain, the requirements for ULAs to properly generate Bessel beams are clarified. For curving beams, trajectories to reach a user while avoiding one obstacle are designed via the Lagrangian method. Numerical results obtained by electromagnetic wave simulations confirm the effectiveness of the analyses for Bessel beams and the curving beam designs. Furthermore, the characteristics of Gaussian beams, beamfocusing, Bessel beams, and curving beams are summarized in terms of the statistical behavior of their intensity and signal processing.

eess.SP↗

arXiv2024

Coverage Analysis for 3D Indoor Terahertz Communication System Over Fluctuating Two-Ray Fading Channels

In this paper, we develop a novel analytical framework for a three-dimensional (3D) indoor terahertz (THz) communication system. Our proposed model incorporates more accurate modeling of wall blockages via Manhattan line processes and precise modeling of THz fading channels via a fluctuating two-ray (FTR) channel model. We also account for traditional unique features of THz, such as molecular absorption loss, user blockages, and 3D directional antenna beams. Moreover, we model locations of access points (APs) using a Poisson point process and adopt the nearest line-of-sight AP association strategy. Due to the high penetration loss caused by wall blockages, we consider that a user equipment (UE) and its associated AP and interfering APs are all in the same rectangular area, i.e., a room. Based on the proposed rectangular area model, we evaluate the impact of the UE's location on the distance to its associated AP. We then develop a tractable method to derive a new expression for the coverage probability by examining the interference from interfering APs and considering the FTR fading experienced by THz communications. Aided by simulation results, we validate our analysis and demonstrate that the UE's location has a pronounced impact on its coverage probability. Additionally, we find that the optimal AP density is determined by both the UE's location and the room size, which provides valuable insights for meeting the coverage requirements of future THz communication system deployment.

cs.IT↗

arXiv2023

Demo: Intelligent Radar Detection in CBRS Band in the Colosseum Wireless Network Emulator

The ever-growing number of wireless communication devices and technologies demands spectrum-sharing techniques. Effective coexistence management is crucial to avoid harmful interference, especially with critical systems like nautical and aerial radars in which incumbent radios operate mission-critical communication links. In this demo, we showcase a framework that leverages Colosseum, the world's largest wireless network emulator with hardware-in-the-loop, as a playground to study commercial radar waveforms coexisting with a cellular network in CBRS band in complex environments. We create an ad-hoc high-fidelity spectrum-sharing scenario for this purpose. We deploy a cellular network to collect IQ samples with the aim of training an ML agent that runs at the base station. The agent has the goal of detecting incumbent radar transmissions and vacating the cellular bandwidth to avoid interfering with the radar operations. Our experiment results show an average detection accuracy of 88%, with an average detection time of 137 ms.

cs.NI↗

arXiv2023

Twinning Commercial Radio Waveforms in the Colosseum Wireless Network Emulator

Because of the ever-growing amount of wireless consumers, spectrum-sharing techniques have been increasingly common in the wireless ecosystem, with the main goal of avoiding harmful interference to coexisting communication systems. This is even more important when considering systems, such as nautical and aerial fleet radars, in which incumbent radios operate mission-critical communication links. To study, develop, and validate these solutions, adequate platforms, such as the Colosseum wireless network emulator, are key as they enable experimentation with spectrum-sharing heterogeneous radio technologies in controlled environments. In this work, we demonstrate how Colosseum can be used to twin commercial radio waveforms to evaluate the coexistence of such technologies in complex wireless propagation environments. To this aim, we create a high-fidelity spectrum-sharing scenario on Colosseum to evaluate the impact of twinned commercial radar waveforms on a cellular network operating in the CBRS band. Then, we leverage IQ samples collected on the testbed to train a machine learning agent that runs at the base station to detect the presence of incumbent radar transmissions and vacate the bandwidth to avoid causing them harmful interference. Our results show an average detection accuracy of 88%, with accuracy above 90% in SNR regimes above 0 dB and SINR regimes above -20 dB, and with an average detection time of 137 ms.

cs.NI↗

arXiv2023

Near-field 6G Networks: Why Mobile Terahertz Communications MUST Operate in the Near Field

Near-field mobile terahertz (THz) communications is one of the candidate enablers for high-rate wireless data exchange in sixth-generation (6G) networks. However, operating in the THz near field brings both attractive opportunities and severe challenges. Hence, it becomes of interest to explore if it is possible to design a realistic mobile THz communication system without working in the THz near field. To answer this question, a mathematical framework is presented modeling a mobile THz link that works exclusively in the far field. The study leads to an interesting theoretical conclusion: while the actual frequency is of (almost) no interest, such a system must operate over a limited bandwidth not exceeding a certain threshold. It is then numerically shown that operating only in the far field imposes stringent limitations on mobile THz communications, thus making them less attractive to prospective high-rate services. In contrast, it is shown that a stationary THz link can still be broadband even when staying exclusively in the THz far field. Hence, broadband mobile THz communications MUST be near-field, while broadband stationary THz links do not have to.

cs.NI↗

arXiv2022

Terahertz Communications for 6G and Beyond Wireless Networks: Challenges, Key Advancements, and Opportunities

The unprecedented increase in wireless data traffic, predicted to occur within the next decade, is motivating academia and industries to look beyond contemporary wireless standards and conceptualize the sixth-generation (6G) wireless networks. Among various promising solutions, terahertz (THz) communications (THzCom) is recognized as a highly promising technology for the 6G and beyond era, due to its unique potential to support terabit-per-second transmission in emerging applications. This article delves into key areas for developing end-to-end THzCom systems, focusing on physical, link, and network layers. Specifically, we discuss the areas of THz spectrum management, THz antennas and beamforming, and the integration of other 6G-enabling technologies for THzCom. For each area, we identify the challenges imposed by the unique properties of the THz band. We then present main advancements and outline perspective research directions in each area to stimulate future research efforts for realizing THzCom in 6G and beyond wireless networks.

eess.SP↗

arXiv2021

Scoring the Terabit/s Goal:Broadband Connectivity in 6G

This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity.

eess.SP↗

arXiv2020

White Paper on Broadband Connectivity in 6G

This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.

eess.SP↗

arXiv2020

Capacity and Outage of Terahertz Communications with User Micro-mobility and Beam Misalignment

User equipment mobility is one of the primary challenges for the design of reliable and efficient wireless links over millimeter-wave and terahertz bands. These high-rate communication systems use directional antennas and therefore have to constantly maintain alignment between transmitter and receiver beams. For terahertz links, envisioned to employ radiation patterns of no more than few degrees wide, not only the macro-scale user mobility (human walking, car driving, etc.) but also the micro-scale mobility - spontaneous shakes and rotations of the device - becomes a severe issue. In this paper, we propose a mathematical framework for the first-order analysis of the effects caused by micro-mobility on the capacity and outage in terahertz communications. The performance of terahertz communications is compared with and without micro-mobility illustrating the difference of up to 1 Tbit/s or 75%. In response to this gap, it is finally shown how the negative effects of the micro-mobility can be partially addressed by a proper adjustment of the terahertz antenna arrays and the period of beam realignment procedure.

cs.NI↗

arXiv2019

Channel Impulse Analysis of Light Propagation for Point-to-point Nano Communications through Cortical Neurons

Recent Brain-Machine Interfaces have shifted towards miniature devices that are constructed from nanoscale components. While these devices can be implanted into the brain, their functionalities can be limited, and will require communication and networking to enable cooperation. One form of communication for neuron stimulation is the use of light. A number of considerations needs to be taken into account for the propagation and this includes diffraction, scattering, absorption, as well as attenuation. These properties are not only affected by the medium, but also by the cell's geometric shape. These factor affects both the direction and amplitude of the light wave. This paper analyzes the propagation path loss and geometrical gain, channel impulse and frequency response for light propagation along the neural tissue. The total attenuation depends on the propagation medium loss and geometrical gain, and the channel response is highly dependent on the quantity of cells along the path. Additionally, the optical properties of the medium also impacts on the time delay at the receiver and the width the location of the detectors. Based on the numerical analysis, spherical cells attenuate approximately 20% of the transmitted power, which is less than the fusiform and pyramidal cells (35% and 65%, respectively).

cs.ET↗

arXiv2017

Wireless Optogenetic Nanonetworks: Device Model and Charging Protocols

In recent years, numerous research efforts have been dedicated towards developing efficient implantable devices for brain stimulation. However, there are limitations and challenges with the current technologies. Firstly, the stimulation of neurons currently is possible through implantable electrodes but limited to a population of neurons. Secondly, a major hurdle lies in developing miniature devices that can last for a lifetime in the patient's brain. In parallel, Optogenetics has emerged proposing the stimulation of neurons using light by means of optical fibers inserted through the skull. Many challenges are thus introduced in terms of suitability to patient's lifestyle and biocompatibility. We have recently proposed the concept of wireless optogenetic nanonetworking devices (WiOptND), addressing these long-term deployment problems, and at the same time targeting single neuron stimulation [1]. The WiOptND is equipped with a miniature LED that is able to stimulate a genetically engineered neuron while harvesting energy from ultrasonic vibrations. This paper investigates how light propagates in the brain tissue, and based on the power required to emit sufficient intensity for stimulation, an energy harvesting circuitry is designed. A number of charging protocols are also proposed to maximize energy efficiency while ensuring minimum number of neural spike misfirings. These protocols include the Charge and Fire, the Predictive Sliding Detection Window, and its variant Markov-Chain based Time-Delay Patterns. Simulation results show the drop of stimulation ratio for 25% and more stable trend in its efficiency ratio are exhibited on Markov-Chain based Time-Delay Patterns compared to Change and Fire. The results show the feasibility of utilizing WiOptND for long-term implants, and a new direction towards precise stimulation of neurons in the cortical columns of the brain.

cs.ET↗

arXiv2017

Cooperative Raman Spectroscopy for Real-time In Vivo Nano-biosensing

In the last few decades, the development of miniature biological sensors that can detect and measure different phenomena at the nanoscale has led to transformative disease diagnosis and treatment techniques. Among others, biofunctional Raman nanoparticles have been utilized in vitro and in vivo for multiplexed diagnosis and detection of different biological agents. However, existing solutions require the use of bulky lasers to excite the nanoparticles and similarly bulky and expensive spectrometers to measure the scattered Raman signals, which limit the practicality and applications of this nano-biosensing technique. In addition, due to the high path loss of the intra-body environment, the received signals are usually very weak, which hampers the accuracy of the measurements. In this paper, the concept of cooperative Raman spectrum reconstruction for real-time in vivo nano-biosensing is presented for the first time. The fundamental idea is to replace the single excitation and measurement points (i.e., the laser and the spectrometer, respectively) by a network of interconnected nano-devices that can simultaneously excite and measure nano-biosensing particles. More specifically, in the proposed system a large number of nanosensors jointly and distributively collect the Raman response of nano-biofunctional nanoparticles (NBPs) traveling through the blood vessels. This paper presents a detailed description of the sensing system and, more importantly, proves its feasibility, by utilizing accurate models of optical signal propagation in intra-body environment and low-complexity estimation algorithms. The numerical results show that with a certain density of NBPs, the reconstructed Raman spectrum can be recovered and utilized to accurately extract the targeting intra-body information.

eess.SY↗