SearcharxivSearch

arXiv subjects

Joseph Kerckhoff

Publications and source records attributed to Joseph Kerckhoff.

At least 19 recordsLinked to original sources

Universal logic with encoded spin qubits in silicon

Qubits encoded in a decoherence-free subsystem and realized in exchange-coupled silicon quantum dots are promising candidates for fault-tolerant quantum computing. Benefits of this approach include excellent coherence, low control crosstalk, and configurable insensitivity to certain error sources. Key difficulties are that encoded entangling gates require a large number of control pulses and high-yielding quantum dot arrays. Here we show a device made using the single-layer etch-defined gate electrode architecture that achieves both the required functional yield needed for full control and the coherence necessary for thousands of calibrated exchange pulses to be applied. We measure an average two-qubit Clifford fidelity of $97.1 \pm 0.2\%$ with randomized benchmarking. We also use interleaved randomized benchmarking to demonstrate the controlled-NOT gate with $96.3 \pm 0.7\%$ fidelity, SWAP with $99.3 \pm 0.5\%$ fidelity, and a specialized entangling gate that limits spreading of leakage with $93.8 \pm 0.7\%$ fidelity.

quant-ph

Fast and high-fidelity state preparation and measurement in triple-quantum-dot spin qubits

We demonstrate rapid, high-fidelity state preparation and measurement in exchange-only Si/SiGe triple-quantum-dot qubits. Fast measurement integration ($980$ ns) and initialization ($\approx 300$ ns) operations are performed with all-electrical, baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of $2.5\pm0.5\times 10^{-3}$. This result is enabled by a high-valley-splitting heterostructure, initialization at the 2-to-3 electron charge boundary, and careful assessment and mitigation of $T_1$ during spin-to-charge conversion. The ultimate fidelity is limited by a number of comparably-important factors, and we identify clear paths towards further improved fidelity and speed. Along with an observed single-qubit randomized benchmarking error rate of $1.7\times 10^{-3}$, this work demonstrates initialization, control, and measurement of Si/SiGe triple-dot qubits at fidelities and durations which are promising for scalable quantum information processing.

quant-ph

Resonant Exchange Operation in Triple-Quantum-Dot Qubits for Spin-Photon Transduction

Triple quantum dots (TQDs) are promising semiconductor spin qubits because of their all-electrical control via fast, tunable exchange interactions and immunity to global magnetic fluctuations. These qubits can experience strong transverse interaction with photons in the resonant exchange (RX) regime, when exchange is simultaneously active on both qubit axes. However, most theoretical work has been based on phenomenological Fermi-Hubbard models, which may not fully capture the complexity of the qubit spin-charge states in this regime. Here we investigate exchange in Si/SiGe and GaAs TQDs using full configuration interaction (FCI) calculations which better describe practical device operation. We show that high exchange operation in general, and the RX regime in particular, can differ significantly from simple models, presenting new challenges and opportunities for spin-photon coupling. We highlight the impact of device electrostatics and effective mass on exchange and identify a new operating point (XRX) where strong spin-photon coupling is most likely to occur in Si/SiGe TQDs. Based on our numerical results, we analyze the feasibility of a remote entanglement cavity iSWAP protocol and discuss design pathways for improving fidelity. Our analysis provides insight into the requirements for TQD spin-photon transduction and demonstrates more generally the necessity of accurate modeling of exchange in spin qubits.

cond-mat.mes-hall

Breaking Lorentz reciprocity with frequency conversion and delay

We introduce a method for breaking Lorentz reciprocity based upon the non-commutation of frequency conversion and delay. The method requires no magnetic materials or resonant physics, allowing for the design of scalable and broadband non-reciprocal circuits. With this approach, two types of gyrators --- universal building blocks for linear, non-reciprocal circuits --- are constructed. Using one of these gyrators, we create a circulator with > 15 dB of isolation across the 5 -- 9 GHz band. Our designs may be readily extended to any platform with suitable frequency conversion elements, including semiconducting devices for telecommunication or an on-chip superconducting implementation for quantum information processing.

physics.class-ph

Widely tunable on-chip microwave circulator for superconducting quantum circuits

We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW ($\approx 10^3$ circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.

quant-ph

The SLH framework for modeling quantum input-output networks

Many emerging quantum technologies demand precise engineering and control over networks consisting of quantum mechanical degrees of freedom connected by propagating electromagnetic fields, or quantum input-output networks. Here we review recent progress in theory and experiment related to such quantum input-output networks, with a focus on the SLH framework, a powerful modeling framework for networked quantum systems that is naturally endowed with properties such as modularity and hierarchy. We begin by explaining the physical approximations required to represent any individual node of a network, eg. atoms in cavity or a mechanical oscillator, and its coupling to quantum fields by an operator triple $(S,L,H)$. Then we explain how these nodes can be composed into a network with arbitrary connectivity, including coherent feedback channels, using algebraic rules, and how to derive the dynamics of network components and output fields. The second part of the review discusses several extensions to the basic SLH framework that expand its modeling capabilities, and the prospects for modeling integrated implementations of quantum input-output networks. In addition to summarizing major results and recent literature, we discuss the potential applications and limitations of the SLH framework and quantum input-output networks, with the intention of providing context to a reader unfamiliar with the field.

quant-ph

Single-sideband modulator for frequency domain multiplexing of superconducting qubit readout

We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microwave-frequency control tones. Microwave signals in the 4 to 8 GHz band, with power up to -85 dBm, are converted up or down in frequency by as much as 120 MHz. Spurious harmonics in the device can be suppressed by up to 25 dB for select probe and modulation frequencies.

quant-ph

General purpose multiplexing device for cryogenic microwave systems

We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures. In particular, rapid switching (less than or equal to 15 ns) between these operation modes enables several multiplexing readout protocols for superconducting qubits. We report the device's performance in a two-channel code domain multiplexing demonstration. The multiplexed data are recovered with fast readout times (up to 400 ns) and infidelities less than 0.01 for probe powers greater than 7 fW, in agreement with the expectation for binary signaling with Gaussian noise.

quant-ph

Closing a quantum feedback loop inside a cryostat: Autonomous state preparation and long-time memory of a superconducting qubit

We propose to use a cryogenic nonlinear resonator for the projective readout, classical memory, and feedback for a superconducting qubit. This approach sidesteps many of the inefficiencies inherent in two-way communication between temperature stages in typical systems with room temperature controllers, and avoids increasing the cryogenic heat load. This controller may find a broad range of uses in multi-qubit systems, but here we analyze two specific demonstrative cases in single qubit-control. In the first case, the nonlinear controller is used to initialize the qubit in a definite eigenstate. And in the second case, the qubit's state is read into the controller's classical memory, where it is stored for an indefinite period of time, and then used to reinstate the measured state after the qubit has decayed. We analyze the properties of this system and we show simulations of the time evolution for the full system dynamics.

quant-ph

On-chip superconducting microwave circulator from synthetic rotation

We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being integrated on chip with other superconducting microwave devices, thus circumventing the many performance-limiting aspects of ferrite circulators. The design is based on the dynamic modulation of DC superconducting microwave quantum interference devices (SQUIDs) that function as nearly linear, tunable inductors. The connection to familiar ferrite-based circulators is a simple frame boost in the internal dynamics' equation of motion. In addition to the general, schematic analysis, we also give an overview of many considerations necessary to achieve a practical design with a tunable center frequency in the 4-8 GHz frequency band, a bandwidth of 240 MHz, reflections at the -20 dB level, and a maximum signal power of approximately order 100 microwave photons per inverse bandwidth.

quant-ph

An efficient all-optical switch using a lambda atom in a cavity QED system

We propose an all-optical switch constructed from a two-mode optical resonator containing a strongly coupled, three-state system. The coupling allows a weak, continuous wave laser drive to incoherently control the transmission of a much stronger, continuous wave signal laser into (and through) the resonator. We demonstrate that in this simple setup the presence of a control drive with one tenth the power of the signal drive can induce near complete reflection of the signal, while its absence allows for near complete transmission. The switch can also be operated as a set-reset relay with two control inputs that efficiently drive the switch into either the reflecting or the transmitting state.

quant-ph

Tunable coupling to a mechanical oscillator circuit using a coherent feedback network

We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than $10^4$ times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.

cond-mat.supr-con

A superconducting microwave multivibrator produced by coherent feedback

We investigate a coherent nonlinear feedback circuit constructed from pre-existing superconducting microwave devices. The network exhibits emergent bistable and astable states, and we demonstrate its operation as a latch and the frequency locking of its oscillations. While the network is tedious to model by hand, our observations agree quite well with the semiclassical dynamical model produced by a new software package [N. Tezak et al., arXiv:1111.3081v1] that systematically interpreted an idealized schematic of the system as a quantum optic feedback network.

cond-mat.supr-con

Remnants of semiclassical bistability in the few-photon regime of cavity QED

Broadband homodyne detection of the light transmitted by a Fabry-Perot cavity containing a strongly-coupled $^{133}$Cs atom is used to probe the dynamic optical response in a regime where semiclassical theory predicts bistability but strong quantum corrections should apply. While quantum fluctuations destabilize true equilibrium bistability, our observations confirm the existence of metastable states with finite lifetimes and a hysteretic response is apparent when the optical drive is modulated on comparable timescales. Our experiment elucidates remnant semiclassical behavior in the attojoule ($\sim10$ photon) regime of single-atom cavity QED, of potential significance for ultra-low power photonic signal processing.

physics.optics

Design of nanophotonic circuits for autonomous subsystem quantum error correction

We reapply our approach to designing nanophotonic quantum memories to formulate an optical network that autonomously protects a single logical qubit against arbitrary single-qubit errors. Emulating the 9 qubit Bacon-Shor subsystem code, the network replaces the traditionally discrete syndrome measurement and correction steps by continuous, time-independent optical interactions and coherent feedback of unitarily processed optical fields.

quant-ph

The dressed atom as binary phase modulator: towards attojoule/edge optical phase-shift keying

Nanophotonic technologies offer great promise for ultra-low power optical signal processing, but relatively few nonlinear-optical phenomena have yet been explored as bases for robust digital modulation/switching~\cite{Yang07,Fara08,Liu10,Noza10}. Here we show that a single two-level system (TLS) coupled strongly to an optical resonator can impart binary phase modulation on a saturating probe beam. Our experiment relies on spontaneous emission to induce occasional transitions between positive and negative phase shifts---with each such edge corresponding to a dissipated energy of just one photon ($\approx 0.23$ aJ)---but an optical control beam could be used to trigger additional phase switching at signalling rates above this background. Although our ability to demonstrate controlled switching in our atom-based experiment is limited, we discuss prospects for exploiting analogous physics in a nanophotonic device incorporating a quantum dot as the TLS to realize deterministic binary phase modulation with control power in the aJ/edge regime.

physics.optics

Designing quantum memories with embedded control: photonic circuits for autonomous quantum error correction

Quantum error correction (QEC) is fundamental for quantum information processing but entails a substantial overhead of classically-controlled quantum operations, which can be architecturally cumbersome to accommodate. Here we discuss a novel approach to designing elementary QEC memory cells, in which all control operations are performed autonomously by an embedded optical feedback loop. Our approach is natural for nanophotonic implementations in which each qubit can be coupled to its own optical resonator, and our design for a memory cell based on the quantum bit-flip or phase-flip code requires only five qubit-cavities (three for the register and two for the controller) connected by wave-guides. The photonic QEC circuit is entirely on-chip, requiring no external clocking or control, and during steady-state operation would only need to be powered by the injection of constant-amplitude coherent fields.

quant-ph

Van der Waals enhancement of optical atom potentials via resonant coupling to surface polaritons

Contemporary experiments in cavity quantum electrodynamics (cavity QED) with gas-phase neutral atoms rely increasingly on laser cooling and optical, magneto-optical or magnetostatic trapping methods to provide atomic localization with sub-micron uncertainty. Difficult to achieve in free space, this goal is further frustrated by atom-surface interactions if the desired atomic placement approaches within several hundred nanometers of a solid surface, as can be the case in setups incorporating monolithic dielectric optical resonators such as microspheres, microtoroids, microdisks or photonic crystal defect cavities. Typically in such scenarios, the smallest atom-surface separation at which the van der Waals interaction can be neglected is taken to be the optimal localization point for associated trapping schemes, but this sort of conservative strategy generally compromises the achievable cavity QED coupling strength. Here we suggest a new approach to the design of optical dipole traps for atom confinement near surfaces that exploits strong surface interactions, rather than avoiding them, and present the results of a numerical study based on $^{39}$K atoms and indium tin oxide (ITO). Our theoretical framework points to the possibility of utilizing nanopatterning methods to engineer novel modifications of atom-surface interactions.

quant-ph